8000 Series

Report 2 Downloads 297 Views

Wood. Electrical. • .24 Amps at. 12 VDC/VAC. • .12 Amps at. 24 VDC/VAC .... For use with: Extended lip for 'knock-down' style frame installations. For use with ...

HES INTEGRATED PRODUCTS

FOLGER ADAM

The 8000 Series is also available in a Complete One Box Solution

Shown with 801 Option

The 8000 series is a compact, high performance electric strike featuring a unique concealed CABINET LOCKS

design for use with cylindrical locksets. No cutting on the frame is required. Simply remove

8000 Series

The concealed electric strike solution for cylindrical locksets Specifications

Frame Application

• UL 1034, burglaryresistant listed and suitable for outdoor use

• Metal • Wood

Electrical

• UL 294 (6th Edition) listed

• .24 Amps at 12 VDC/VAC

the existing strike plate, adjust the vertical

• ANSI/BHMA A156.31, Grade 1

alignment feature to the latchbolt centerline,

• RoHS compliant

and install. Its strength is derived from a

• Patents: 5,934,720; 8,146,966; 8,157,302; 8,465,067

unique keeper pin locking design, enabling the

• .12 Amps at 24 VDC/VAC

8000 to exceed the ratings of the frame, door

• DC continuous duty/ AC intermittent duty only • PoE friendly

ACCESSORIES

and locking hardware. This field selectable fail secure/fail safe unit is easy to install and accommodates latchbolts up to 5/8" throw.

GENERAL INFORMATION

8000 Models

34

www.hesinnovations.com

8000

Faceplate options ordered Universal electric strike separately, see page 38

8000C

Complete Includes the 801 and 801A faceplates electric strike

RF8010 Integrated Prox

Includes the strike body, Prox reader and door position switch

IC8020 Integrated iCLASS®

Includes the strike body, iCLASS reader and door position switch

ASSA ABLOY, the global leader in door opening solutions

HES

[85.5] 3-3/8"

[123.4] 4-7/8"

[36.5] 1-7/16"

[27.3] 1-1/16"

Diagram shown with 801 Option

• Strike body depth 1-1/16"

Finishes

• No cutting on frame required

• Strike body width 1-7/16"

630 » Satin stainless

• Vertical adjustability to accommodate door sag and misalignment

• Five-year limited warranty

605 » Bright brass

• Tamper-resistant

LBM » Latchbolt monitor

• Static strength 1,500 lbs. • Dynamic strength 70 ft-lbs. • Endurance 500,000 cycles • Field selectable fail secure/fail safe • Non-handed

606 » Satin brass 612 » Satin bronze 613 » Bronze toned 629 » Bright stainless steel

Accessories 2001M » Plug-in bridge rectifier

BLK » Black

2004M » ElectroLynx adapter

*Complete Pacs are only available in the 630 finish

®

2005M3 » SMART Pac® III

CABINET LOCKS

• Dual-voltage 12 or 24 VDC/VAC

Optional Features

INTEGRATED PRODUCTS

Standard Features

FOLGER ADAM

2006M » Plug-in buzzer

• Internally mounted solenoid • Accommodates 1/2" – 5/8" cylindrical latchbolt (5/8" with 1/8" door gap)

ACCESSORIES GENERAL INFORMATION



[104.8] 4-1/8"

© 2016, Hanchett Entry Systems, Inc., an ASSA ABLOY Group company.

Customer Support  800.626.7590 35

HES

8000/8300 Series Faceplate Options Operation: After releasing the latchbolt, the keeper returns to the locked position

801 Option FOLGER ADAM

For use with: Cylindrical locksets in ANSI metal jambs, with latchbolts up to 5/8" throw 4-7/8" × 1-1/4"

» ANSI/BHMA Numbers:  E05031, E09321, E09322, E09323 801A Option

4-7/8" × 1-1/4" Radius corners and flat faceplate

For use with: Cylindrical locksets with latchbolts up to 5/8" throw. Includes universal mounting tabs. Aluminum frames.

» ANSI/BHMA Numbers:  E05031, E09321, E09322, E09323

INTEGRATED PRODUCTS

801E Option 4-7/8" × 1-1/4" Extended lip

For use with: Extended lip for ‘knock-down’ style frame installations. For use with cylindrical latchbolts up to 5/8" throw.

» ANSI/BHMA Numbers:  E05031, E09321, E09322, E09323 802 Option

CABINET LOCKS

For use with: Cylindrical locksets with latchbolts up to 5/8" throw. Includes universal mounting tabs. Aluminum frames. 7-15/16" × 1-7/16"

» ANSI/BHMA Numbers:  E05031, #E09321, E09322, E09323

803 Option 6-7/8" × 1-1/4"

ACCESSORIES

Radius corners and flat faceplate

For use with: Cylindrical locksets with latchbolts up to 5/8" throw. Includes universal mounting tabs. Aluminum frames.

» ANSI/BHMA Numbers:  E05031, E09321, E09322, E09323

805 Option For use with: Cylindrical locksets. For use with latchbolts up to 5/8" throw. Four point mounting for wood installations. 9" × 1-3/8"

» ANSI/BHMA Numbers:  #E05031, #E09321, #E09322, #E09323

Radius corners and flat faceplate

GENERAL INFORMATION

“For use with” information is offered as a recommendation only. Reference should be made to the lockset manufacturer for proper installation instructions necessary to meet compatibility requirements.

38

www.hesinnovations.com

ASSA ABLOY, the global leader in door opening solutions

compensate for frame and door irregularities. Sometimes, adjusting the frame and door

FOLGER ADAM

The 8000/8300 can be adjusted to

HES

back to industry standards is just not an option. Here are some tips to quickly compensate for frame twist and determine Figure 1

the condition of the latch bolt. Measure Frame Twist One way to measure frame twist is to place a carpenter square on the stop and the face of the door. If the angle is less than 90 degrees, the 45 degree ramp angle of the 8000/8300 is steepened and may need to be corrected as shown at left (Figure 1).

CABINET LOCKS

Figure 2

We recommend you check the condition of the latch bolt prior to installing the 8000/8300. Poorly constructed, worn out or damaged latch bolts may not slide along a ramp at any angle. To check the condition of your latch bolt, we recommend applying a slight force to the tip of the latch bolt (about 45 degrees to the door face). Make sure the latch bolt can be pushed up into the door.

INTEGRATED PRODUCTS

Compensate for Frame Twist

Figure 3

If manipulating the frame is not possible, we recommend placing several shims under the top and bottom (stop side) of the faceplate (Figure 2). This effectively increases the 8000/8300 ramp angle and compensates for frame twist. You can also compensate for frame twist by placing shims under the top and bottom (bevel side) of the latchbolt (Figure 3).

Customer Support  800.626.7590 39

GENERAL INFORMATION

© 2016, Hanchett Entry Systems, Inc., an ASSA ABLOY Group company.

When a frame is twisted, the relationship between the face of a closed door and of the inside face of the frame (i.e., Rabbet) may not meet the 90 degree industry standard. Untrue frames and doors impact latch bolt wear and the force required to exit, so we recommend you ensure that the angle is between 90–95 degrees.

ACCESSORIES



Reduce your install time by evaluating your opening

Recommend Documents
8000 SERIES. MANY DAILY ON/OFF. OPERATIONS PER DAY. DUTY CYCLE. 24 HOUR TIME SWITCH. Duty cycling. Ventilating fans. Pumping. Irrigation. Process control. Laboratory experiments. For one or multiple daily. ON/OFF operations . SCHEDULING: Minimum ON s

The devices are Underwriters. Laboratory (UL, USA and ULC, Canada) listed for Panic Exit Hardware or Fire Exit Hardware, and are certified to ANSI.

No cutting on frame required. Vertical adjustability to ... Strike body width decreased to 1-7/16" to increase frame compatibility. Five year limited warranty.

Camden Door Controls offers the widest range of high quality, feature rich and affordable pneumatic 'Request to Exit' switches in the industry. All switches ...

OPTIONAL RESERVE POWER: “L” models keep dial on time up to 16 hours during power outage . INPUT VOLTAGE: 120, 208-277VAC or. 480VAC, 60Hz ...

ENCLOSURE: Indoor NEMA 1 Metal with lockable hasp (see page ... Duty cycling. Ventilating fans ... DUTY CYCLE: Settings of 1⁄60 th of dial speed . CATALOG.

BlackDiamond® 8800 series switches simplify enterprise, data center and service .... port and a range of QoS technologies that can prioritize and .... 128. 128. 128. 128. Layer 2 MAC FDB. 128k. 512k. 512k. 512k. 32k. 32k. 32k. 8k. 32k. 32k.

These meters are designed for use with TSP or HSP transmitters. The meter can be used for either local or remote indication of the sensed variable. All meters of the ASP-500 series are zero suppressed - taut band - 100° flat arc movement type with a

Includes the 801 and 801A faceplates in the box. Model 8000C includes a 801 and a 801A faceplate in the box. The 8000. Series is also available in a Complete. One Box. Solution. INT. EGR. A. T. ED. PR. ODUC. T. S. C. A. BINE. T LO. CK. S. AC. C. ES.

S-8300. 300Vac/dc. 30. 25. Mounting Dimensions. No. of. Inches. Millimeters. Poles. A. B. A. B. 1. – ... Varies with number of poles. Contact customer service. BK/.