92 | 93 - Kriz-Davis
92 | 93
Fully Enclosed Industrial
T5 | T8
FEATURES Fully enclosed for dust and moisture resistance; also available UL listed for wet locations.1 Seamless gasket poured and formed in place ensures a tight seal. Stippled lens diffuses the lamp image. Ideal for food processing, car washes, under canopies, and cold storage facilities. •• This fixture is proudly made in the USA.
92 Series shown EXAMPLE
93
-
t
SERIES
4 t
-
2 32
-
t t
NOMINAL TOTAL WATTAGE/ LENGTH LAMPS TYPE
A
-
-
OP TIONS
t
t
-
E B2
UNV
t
SHIELDING OPTIONS
t
BALLAST TYPE
VOLTAGE
COMPONENT
SPECIFICATIONS
ORDERING INFORMATION
•• Enclosure – Outer housing consists of polyester reinforced fiberglass. Internal brass studs secure channel to outer housing. •• Internal Housing – 92 Series: 22-gauge die-formed C.R.S.; 93 Series: 20-gauge die-formed, ribbed C.R.S. •• Latching – Injection-molded suitcase type latches. •• Reflective Surfaces – 92% minimum average reflective white polyester powder coat bonded to phosphate-free, multistage pretreated metal. All parts painted after fabrication to facilitate installation, increase efficiency, and inhibit corrosion. •• Shielding – High-impact acrylic with DR additive. Internal stipple surface diffuses lamp image. •• Electrical – Electronic ballast standard, instant start T8, program start T5, rated Class P. •• Mounting – Surface or suspended. •• Labels & Certifications – UL/CUL listed as fluorescent luminaire suitable for dry or damp locations. UL/CUL listed as suitable for wet locations when specified with WET/_ or WTT/_ option.1 NSF/ANSI Standard 2–Splash Zone certified.
SERIES
OPTIONS/ACCESSORIES (Continued)
92 93
WTT/_ 2
Fully Enclosed Industrial–5” Deep Fully Enclosed Industrial–6” Deep
1/2” watertight hub (factoryinstalled in back of housing, must specify 1 or 2 hubs) 2 3 TP Injection-molded tamperresistant latches 3 SS LATCH Stainless steel latches TP/SS LATCH 3 Tamper-resistant stainless steel latches 3 TP/PC LATCH 3 Tamper-resistant polycarbonate latches 3 SSMB Stainless steel ceiling mounting brackets (2 per fixture) SSMB/VBY/__ Stainless steel mounting brackets with Y-hangers and suspension chain (2 per fixture) (specify length of chain)
NOMINAL LENGTH 2 4 8
2’ (92 Series only) 4’ 8’
TOTAL LAMPS 1, 2, 3, 4, or 6 (1-, 2-, or 3-lamp cross-section)
LAMP WATTAGE/TYPE 17 28T5S
2’, 17-watt T8 (92 Series only) 4’, 28-watt T5 (1- or 2-lamp ballast[s] only) 4’, 32-watt T8 4’, 54-watt T5HO 8’, 59-watt T8 1 8’, 86-watt T8 1
32 54T5H 59 1 86 1
BALLAST TYPE See page 230 for complete ballast offering. 1-lamp electronic ballast EB1 EB2 2-lamp electronic ballast EB3 3-lamp electronic ballast 4-lamp electronic ballast EB4
SHIELDING A
High-impact clear acrylic with internal stipple (standard) 50% DR high-impact diffuser 100% polycarbonate prismatic diffuser (not available in 8’ units on 92 series)
DR PC
OPTIONS/ACCESSORIES
VOLTAGE 120 277 1
2
For generic EM ballast options, see page 231. WET/_ 2 1/2” watertight hub (factoryinstalled in end of housing, must specify 1 or 2 hubs) 2
2
3
120V 277V
UNV 347
120-277V 347V
1- or 2-lamp cross-section only When specifying EM option, EM ballast for enclosed and gasketed fixtures is required for fixture to be suitable for wet locations. This option requires a tamper-resistant tool (must be ordered separately). Please specify quantity required per project.
QUANTITY ESTIMATOR Item #: 93-4-232-A Room Size ± 35 fc. 20’ x 20’ (400 sq. ft.) 6 50’ x 50’ (2,500 sq. ft.) 25 100’ x 100’ (10,000 sq. ft.) 90
± 50 fc. 9 36 132
± 75 fc. 12 56 196
Calculations based on standard reflectance of 80/50/20 and a light loss factor of .85 with a 10’-0” ceiling height.
70
| Industrial
5-7/8”
5”
7”
7”
92 Series
93 Series
Nominal Length 2’ (92 Series only) 4’ 8’
LGV30862.072214MP Information contained herein is subject to change without notice.
Overall Length 25-13/16” 49-13/16” 97-13/16”
Fully Enclosed Industrial
T5 | T8
FEATURES Fully enclosed for dust and moisture resistance; also available UL listed for wet locations.1 Seamless gasket poured and formed in place ensures a tight seal. Stippled lens diffuses the lamp image. Ideal for food processing, car washes, under canopies, and cold storage facilities. •• This fixture is proudly made in the USA.
92 Series shown EXAMPLE
93
-
t
SERIES
4 t
-
2 32
-
t t
NOMINAL TOTAL WATTAGE/ LENGTH LAMPS TYPE
A
-
-
OP TIONS
t
t
-
E B2
UNV
t
SHIELDING OPTIONS
t
BALLAST TYPE
VOLTAGE
COMPONENT
SPECIFICATIONS
ORDERING INFORMATION
•• Enclosure – Outer housing consists of polyester reinforced fiberglass. Internal brass studs secure channel to outer housing. •• Internal Housing – 92 Series: 22-gauge die-formed C.R.S.; 93 Series: 20-gauge die-formed, ribbed C.R.S. •• Latching – Injection-molded suitcase type latches. •• Reflective Surfaces – 92% minimum average reflective white polyester powder coat bonded to phosphate-free, multistage pretreated metal. All parts painted after fabrication to facilitate installation, increase efficiency, and inhibit corrosion. •• Shielding – High-impact acrylic with DR additive. Internal stipple surface diffuses lamp image. •• Electrical – Electronic ballast standard, instant start T8, program start T5, rated Class P. •• Mounting – Surface or suspended. •• Labels & Certifications – UL/CUL listed as fluorescent luminaire suitable for dry or damp locations. UL/CUL listed as suitable for wet locations when specified with WET/_ or WTT/_ option.1 NSF/ANSI Standard 2–Splash Zone certified.
SERIES
OPTIONS/ACCESSORIES (Continued)
92 93
WTT/_ 2
Fully Enclosed Industrial–5” Deep Fully Enclosed Industrial–6” Deep
1/2” watertight hub (factoryinstalled in back of housing, must specify 1 or 2 hubs) 2 3 TP Injection-molded tamperresistant latches 3 SS LATCH Stainless steel latches TP/SS LATCH 3 Tamper-resistant stainless steel latches 3 TP/PC LATCH 3 Tamper-resistant polycarbonate latches 3 SSMB Stainless steel ceiling mounting brackets (2 per fixture) SSMB/VBY/__ Stainless steel mounting brackets with Y-hangers and suspension chain (2 per fixture) (specify length of chain)
NOMINAL LENGTH 2 4 8
2’ (92 Series only) 4’ 8’
TOTAL LAMPS 1, 2, 3, 4, or 6 (1-, 2-, or 3-lamp cross-section)
LAMP WATTAGE/TYPE 17 28T5S
2’, 17-watt T8 (92 Series only) 4’, 28-watt T5 (1- or 2-lamp ballast[s] only) 4’, 32-watt T8 4’, 54-watt T5HO 8’, 59-watt T8 1 8’, 86-watt T8 1
32 54T5H 59 1 86 1
BALLAST TYPE See page 230 for complete ballast offering. 1-lamp electronic ballast EB1 EB2 2-lamp electronic ballast EB3 3-lamp electronic ballast 4-lamp electronic ballast EB4
SHIELDING A
High-impact clear acrylic with internal stipple (standard) 50% DR high-impact diffuser 100% polycarbonate prismatic diffuser (not available in 8’ units on 92 series)
DR PC
OPTIONS/ACCESSORIES
VOLTAGE 120 277 1
2
For generic EM ballast options, see page 231. WET/_ 2 1/2” watertight hub (factoryinstalled in end of housing, must specify 1 or 2 hubs) 2
2
3
120V 277V
UNV 347
120-277V 347V
1- or 2-lamp cross-section only When specifying EM option, EM ballast for enclosed and gasketed fixtures is required for fixture to be suitable for wet locations. This option requires a tamper-resistant tool (must be ordered separately). Please specify quantity required per project.
QUANTITY ESTIMATOR Item #: 93-4-232-A Room Size ± 35 fc. 20’ x 20’ (400 sq. ft.) 6 50’ x 50’ (2,500 sq. ft.) 25 100’ x 100’ (10,000 sq. ft.) 90
± 50 fc. 9 36 132
± 75 fc. 12 56 196
Calculations based on standard reflectance of 80/50/20 and a light loss factor of .85 with a 10’-0” ceiling height.
70
| Industrial
5-7/8”
5”
7”
7”
92 Series
93 Series
Nominal Length 2’ (92 Series only) 4’ 8’
LGV30862.072214MP Information contained herein is subject to change without notice.
Overall Length 25-13/16” 49-13/16” 97-13/16”
