Accessories Shaft Mount Reducers Belt Guards Unit ... - MRO Supply

Report 3 Downloads 27 Views

Belt guard assemblies consist of a guard with mounting brackets included. These belt guards may also be used with screw conveyor drives as shown on pages 84 through 89. Belt guard standard color is yellow. Plated fasteners providing protection in outdoor applications are supplied with the guard assembly. TOP MOUNT.

®

Accessories Shaft Mount Reducers Belt Guards Unit Sizes 107-315

Belt guard assemblies consist of a guard with mounting brackets included. These belt guards may also be used with screw conveyor drives as shown on pages 84 through 89. Belt guard standard color is yellow. Plated fasteners providing protection in outdoor applications are supplied with the guard assembly.

TOP MOUNT

SIDE MOUNT

Table No. 25 DIMENSIONS IN INCHES SHAFT MOUNT SIZE

107 115 203 207 215 307 315

82

BELT GUARD PART NO.

BGP1 BGP2 BGP3 BGP4

TOP MOUNT CENTER DISTANCE MIN. MAX. 14.71 34.80

SIDE MOUNT CENTER DISTANCE MIN. MAX. 10.95 32.74

A

B

7.88

10.24

16.50

34.99

10.96

7.71

10.41

17.70

36.56

12.66

33.71

10.58

13.54

19.59

40.41

13.33

37.34

10.43

13.69

23.00

43.17

12.89

39.41

11.44

15.68

24.56

48.38

17.16

44.63

15.38

19.75

25.57

50.05

17.16

45.34

14.94

20.18

32.74

C

D

E

F

18.12

9.06

50.12

5.00

24.12

12.06

61.12

5.50

27.12

13.56

65.12

5.50

35.12

14.00

77.12

6.50

G 7.56 7.86

H MAX.

14.00

9.05 9.25

23.00

10.23 11.81 13.43

27.00

Recommend Documents
Belt guard assemblies consist of a guard kit and a mounting bracket kit as shown in the tables. Mounting bracket kit must be purchased separately. These belt guards may also be used with screw conveyor drives. Belt guard standard color is yellow. Bra

Part Number Explanation. Output bore in 1/16" increments. (407 = 4 7/16" output bore). Shaft mount. TorqTaper Plus bushing. Nominal ratio (25:1). Barrier Seal. 407 SM TP 25 B. * Complete part number by adding ratio symbol, for example, “407SMTP05Bâ

NOTE — “05” is symbol for 5:1 nominal ratio: see page 13 for exact ratios and ratio symbols. Dimension “MC” is minimum clearance for bushing removal. Order bushings from pages 70 thru 72 for shaft size required. TRAP .ON *. SEHCNINISNOISNEM

NIM .XAM. PTMH701. 42.4. 81.1. 91.0. 77.3. 05.2. 59.3. 05.3. 88.7. 60.1. 37.2. 00.42. 00.03. 8/3. 61/71. 85. PTMH511. 15.4. 53.1. 91.0. 63.4. 05.2. 65.4. 05.3. 41.9. 60.1. 21.3. 00.42. 00.03. 8/3. 61/511. 97. PTMH302. 40.5. 84.1. 91.0. 62.5. 05.2. 64

than the diameter shown in the selection table from which the reducer was selected. Smaller diameter sheaves may result in reduced bearing life. 90°. ± 30° ... Disconnect all power before adjusting units. Helical Shaft Mount. Speed Reducers. BREAT

806. PSB806. 573.8. 005.9. 0.71. 008. PSB008. 083.9. 092.31. 0.06. EZISRECUDER .ONTRAP. 701. H-PAT701. 511. H-PAT511. 302. H-PAT302. 702. H-PAT702. 512. H-PAT512. 703. H-PAT703. 513. H-PAT513. 704. BH-PAT704. 514. BH-PAT514. 705. BH-PAT705. 806. BH-P

000.5. 032.6. 4.8. 703. 000.5. 077.6. 4.8. 513. PSB513. 000.6. 087.7. 2.61. 704. PSB704. 521.6. 526.6. 0.01. 514. PSB514. 518.6. 005.7. 0.31. 705. PSB705. 526.7. 969.7. 0.51. 806. PSB806. 573.8. 005.9. 0.71. EZISRECUDER .ONTRAP. 701. PAT701. 511. PAT

u Components needed to make assembled reducer must be ordered separately. If Fan Kit is required, see the table to left. s Select either Standard Base Kit (S-BK) or Econo Base Kit (E-BK) or Solid Base Kit (BKS); base kits are shown on page 220. Consu

Reducer shipped without oil. Fill to proper level before operation to avoid damage and/ or personal injury. Do not use lubricants with anti-wear/extreme pressure ...

TORQUE-ARM Shaft Mount Speed Reducers. You can now realize significant cost savings with the new TXT. TORQUE-ARM Speed Reducer. And here's how:.