Accessories Shaft Mount Reducers Options and

Report 0 Downloads 60 Views

806. PSB806. 573.8. 005.9. 0.71. 008. PSB008. 083.9. 092.31. 0.06. EZISRECUDER .ONTRAP. 701. H-PAT701. 511. H-PAT511. 302. H-PAT302. 702. H-PAT702. 512. H-PAT512. 703. H-PAT703. 513. H-PAT513. 704. BH-PAT704. 514. BH-PAT514. 705. BH-PAT705. 806. BH-PAT806. 008. H-PAT008. Torque Arm Kits.

Accessories Shaft Mount Reducers

Shaft Mount Accessories

Options and Accessories Sizes 107-800

Size 107-800

REDUCER SIZE 107 115 203 207 215 307 315 407 415 507 608 800

Backstop Kits

USE BACKSTOP KIT PART NO.

DIMENSIONS

RATIOS

107BSP 115-203BSP 207BSP 215-307BSP ALL

315BSP 407BSP 415BSP 507BSP 608BSP 800BSP

D 3.000 3.438 3.438 4.750 5.000 5.000 6.000 6.125 6.815 7.625 8.375 9.380

WT. LBS.

L 4.336 4.573 5.100 5.695 6.230 6.770 7.780 6.625 7.500 7.969 9.500 13.290

2.4 3.1 3.1 7.4 8.4 8.4 16.2 10.0 13.0 15.0 17.0 60.0

Torque Arm Kits

REDUCER SIZE 107 115 203 207 215 307 315 407 415 507 608 800

PART NO. 107TAP-H 115TAP-H 203TAP-H 207TAP-H 215TAP-H 307TAP-H 315TAP-H 407TAP-HB 415TAP-HB 507TAP-HB 608TAP-HB 800TAP-H

131

Recommend Documents
000.5. 032.6. 4.8. 703. 000.5. 077.6. 4.8. 513. PSB513. 000.6. 087.7. 2.61. 704. PSB704. 521.6. 526.6. 0.01. 514. PSB514. 518.6. 005.7. 0.31. 705. PSB705. 526.7. 969.7. 0.51. 806. PSB806. 573.8. 005.9. 0.71. EZISRECUDER .ONTRAP. 701. PAT701. 511. PAT

Belt guard assemblies consist of a guard kit and a mounting bracket kit as shown in the tables. Mounting bracket kit must be purchased separately. These belt guards may also be used with screw conveyor drives. Belt guard standard color is yellow. Bra

Belt guard assemblies consist of a guard with mounting brackets included. These belt guards may also be used with screw conveyor drives as shown on pages 84 through 89. Belt guard standard color is yellow. Plated fasteners providing protection in out

Reducer shipped without oil. Fill to proper level before operation to avoid damage and/ or personal injury. Do not use lubricants with anti-wear/extreme pressure ...

TORQUE-ARM Shaft Mount Speed Reducers. You can now realize significant cost savings with the new TXT. TORQUE-ARM Speed Reducer. And here's how:.

Apr 3, 2018 - SHAFT COUPLINGS. Catalog Number Selections/Dimensions . ... Set Screw Collars . .... ORDER BY CATALOG NUMBER OR ITEM CODE.

201PBT701. 8/11. 8/73x8/1x4/1. 2. 0.2. 301PBT701. 61/31. 8/73x8/1x4/1. 2. 9.1. 401PBT701. 4/11. 8/73x8/1x4/1. 2. 8.1. 501PBT701. 61/51. 8/73x23/5x61/5. 2. 6.1. 601PBT701. 8/31. 8/73x23/5x61/5. 2. 5.1. 701PBT701. 61/71. 8/73x61/3x8/3. 2. 5.1. PTMS511.

than the diameter shown in the selection table from which the reducer was selected. Smaller diameter sheaves may result in reduced bearing life. 90°. ± 30° ... Disconnect all power before adjusting units. Helical Shaft Mount. Speed Reducers. BREAT

Part Number Explanation. Output bore in 1/16" increments. (407 = 4 7/16" output bore). Shaft mount. TorqTaper Plus bushing. Nominal ratio (25:1). Barrier Seal. 407 SM TP 25 B. * Complete part number by adding ratio symbol, for example, “407SMTP05Bâ

NOTE — “05” is symbol for 5:1 nominal ratio: see page 13 for exact ratios and ratio symbols. Dimension “MC” is minimum clearance for bushing removal. Order bushings from pages 70 thru 72 for shaft size required. TRAP .ON *. SEHCNINISNOISNEM