Cable Entry Bracket with Slotted Cover - Aimedia.co
EW n N re orse o e m rev
!
Cable Entry Bracket with Slotted Cover Installs FAST with a hole saw • Non-metallic
Arlington’s heavy-duty, super-sturdy CE1RP Cable Entry Bracket is the fastest way to install a bundle of Class 2 low voltage wiring. Our new entry bracket installs quickly and easily with a 3.5" hole saw, saving time and money. Its reinforced, slotted cover holds a larger bundle of low voltage cable secure and allows the pass-through of even the largest HDMI connectors. When tightened, mounting wing screws hold the bracket securely against the wall. You can level or straighten the CE1RP by rotating it, then tightening the screws. • Installs with a 3.5" hole saw in less than a minute • Adjusts to fit 1/4" to 1-1/2" wall thicknesses
CE1RP Cable Entry Bracket w/ slotted cover
Check out the new CE1RP, and our
EW!
N
entire line of time-saving low voltage mounting brackets.
CE1RP Patent pending R R
UL/CSA Listed if applicable
Arlington 1 Stauffer Industrial Park Scranton, PA 18517 800/233.4717 Fax 570/562.0646 www.aifittings.com
CE1RP Cable Entry Bracket
!
NEW
Non-metallic • Handles larger bundles of low voltage cable
Determine bracket position. Cut opening with a 3.5" hole saw.
Pull cable...
...through the slotted opening in CE1RP. Insert into hole. Level, straighten the bracket.
Two mounting wing screws secure bracket in the wall Reinforced cover holds larger cable bundles, without pulling out
Tighten the two mounting wing screws to pull the CE1RP securely against the wall board.
Completed installation.
CATALOG NUMBER
CE1RP
CE1RP Cable Entry Bracket
UPC/DCI/NAED MFG #01 8997
DESCRIPTION
UNIT PKG
STD PKG
10560
Non-metallic Cable Entry Bracket
25
25
©2011 Arlington Industries, Inc.
with reinforced, slotted cover
Arlington 1 Stauffer Industrial Park Scranton, PA 18517 800/233.4717 Fax 570/562.0646 www.aifittings.com
Distributed by
Patent pending CE1RP 0511/25M
!
Cable Entry Bracket with Slotted Cover Installs FAST with a hole saw • Non-metallic
Arlington’s heavy-duty, super-sturdy CE1RP Cable Entry Bracket is the fastest way to install a bundle of Class 2 low voltage wiring. Our new entry bracket installs quickly and easily with a 3.5" hole saw, saving time and money. Its reinforced, slotted cover holds a larger bundle of low voltage cable secure and allows the pass-through of even the largest HDMI connectors. When tightened, mounting wing screws hold the bracket securely against the wall. You can level or straighten the CE1RP by rotating it, then tightening the screws. • Installs with a 3.5" hole saw in less than a minute • Adjusts to fit 1/4" to 1-1/2" wall thicknesses
CE1RP Cable Entry Bracket w/ slotted cover
Check out the new CE1RP, and our
EW!
N
entire line of time-saving low voltage mounting brackets.
CE1RP Patent pending R R
UL/CSA Listed if applicable
Arlington 1 Stauffer Industrial Park Scranton, PA 18517 800/233.4717 Fax 570/562.0646 www.aifittings.com
CE1RP Cable Entry Bracket
!
NEW
Non-metallic • Handles larger bundles of low voltage cable
Determine bracket position. Cut opening with a 3.5" hole saw.
Pull cable...
...through the slotted opening in CE1RP. Insert into hole. Level, straighten the bracket.
Two mounting wing screws secure bracket in the wall Reinforced cover holds larger cable bundles, without pulling out
Tighten the two mounting wing screws to pull the CE1RP securely against the wall board.
Completed installation.
CATALOG NUMBER
CE1RP
CE1RP Cable Entry Bracket
UPC/DCI/NAED MFG #01 8997
DESCRIPTION
UNIT PKG
STD PKG
10560
Non-metallic Cable Entry Bracket
25
25
©2011 Arlington Industries, Inc.
with reinforced, slotted cover
Arlington 1 Stauffer Industrial Park Scranton, PA 18517 800/233.4717 Fax 570/562.0646 www.aifittings.com
Distributed by
Patent pending CE1RP 0511/25M
