Capital Capital Integrator⢠v2014.1
Capital
Capital Integrator v2014.1 Student Workbook
1999-2016 Mentor Graphics Corporation All rights reserved. This document contains information that is trade secret and proprietary to Mentor Graphics Corporation or its licensors and is subject to license terms. No part of this document may be photocopied, reproduced, translated, distributed, disclosed or provided to third parties without the prior written consent of Mentor Graphics.
This document is for information and instruction purposes. Mentor Graphics reserves the right to make changes in specifications and other information contained in this publication without prior notice, and the reader should, in all cases, consult Mentor Graphics to determine whether any changes have been made. The terms and conditions governing the sale and licensing of Mentor Graphics products are set forth in written agreements between Mentor Graphics and its customers. No representation or other affirmation of fact contained in this publication shall be deemed to be a warranty or give rise to any liability of Mentor Graphics whatsoever. MENTOR GRAPHICS MAKES NO WARRANTY OF ANY KIND WITH REGARD TO THIS MATERIAL INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. MENTOR GRAPHICS SHALL NOT BE LIABLE FOR ANY INCIDENTAL, INDIRECT, SPECIAL, OR CONSEQUENTIAL DAMAGES WHATSOEVER (INCLUDING BUT NOT LIMITED TO LOST PROFITS) ARISING OUT OF OR RELATED TO THIS PUBLICATION OR THE INFORMATION CONTAINED IN IT, EVEN IF MENTOR GRAPHICS CORPORATION HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. RESTRICTED RIGHTS LEGEND 03/97 U.S. Government Restricted Rights. The SOFTWARE and documentation have been developed entirely at private expense and are commercial computer software provided with restricted rights. Use, duplication or disclosure by the U.S. Government or a U.S. Government subcontractor is subject to the restrictions set forth in the license agreement provided with the software pursuant to DFARS 227.72023(a) or as set forth in subparagraph (c)(1) and (2) of the Commercial Computer Software - Restricted Rights clause at FAR 52.227-19, as applicable. Contractor/manufacturer is: Mentor Graphics Corporation 8005 S.W. Boeckman Road, Wilsonville, Oregon 97070-7777. Telephone: 503.685.7000 Toll-Free Telephone: 800.592.2210 Website: www.mentor.com SupportNet: supportnet.mentor.com/ Send Feedback on Documentation: supportnet.mentor.com/doc_feedback_form
TRADEMARKS: The trademarks, logos and service marks ("Marks") used herein are the property of Mentor Graphics Corporation or other third parties. No one is permitted to use these Marks without the prior written consent of Mentor Graphics or the respective third-party owner. The use herein of a thirdparty Mark is not an attempt to indicate Mentor Graphics as a source of a product, but is intended to indicate a product from, or associated with, a particular third party. A current list of Mentor Graphics’ trademarks may be viewed at: www.mentor.com/trademarks. End-User License Agreement: You can print a copy of the End-User License Agreement from: www.mentor.com/eula.
Part Number: 073429
Capital Capital Integrator Training Course V2014.1
Table of Contents Page Chapter 1 Introduction to Capital Integrator Capital Integrator Concepts .................................................................................................... 1 Overview ................................................................................................................................. 1 Wiring Synthesis Process ....................................................................................................... 3 Getting Started ........................................................................................................................ 4 Capital Integrator’s User Interface .......................................................................................... 6
Chapter 2 Creating Integrator Diagrams Getting Started with Capital Integrator ................................................................................... 7 Create a New Design .............................................................................................................. 7 Creating Diagrams .................................................................................................................. 8 Place a Skeleton (System Outline) ....................................................................................... 10 Defining the Topology ........................................................................................................... 11 Create Slots .......................................................................................................................... 11 Define Bundle Routing .......................................................................................................... 11 Defining Harnesses .............................................................................................................. 13 Creating Inline Connectors ................................................................................................... 13 Associating Logical Designs ................................................................................................. 14 Place Devices ....................................................................................................................... 17 Design Assistant ................................................................................................................... 18 Language Translation ........................................................................................................... 18
Chapter 3 Wire Synthesis Wire Synthesis ...................................................................................................................... 19 Generating Wires .................................................................................................................. 20 Integrator Reports ................................................................................................................. 21 Wire Preservation ................................................................................................................. 21 Wire Visualization ................................................................................................................. 21
Chapter 4 Capital AutoView Assist for Integrator Capital AutoView Assist for Integrator (CAVAI) .................................................................... 22 Selecting AVAssist Integrator Specific Preferences ............................................................. 23 Functionally Partitioned Diagrams ........................................................................................ 24 Diagram Partitioning ............................................................................................................. 26 View Generated Diagrams.................................................................................................... 27
Chapter 5 Composite Wiring Synthesis Composite Wiring Synthesis ................................................................................................. 28 Vehicle Models...................................................................................................................... 29 Design Assistant and Signal Route States ........................................................................... 32 Wire Manipulation ................................................................................................................. 33 Wire Synthesis and Shared Objects ..................................................................................... 33 Module Code Definition ........................................................................................................ 34
Creating a Design Revision .................................................................................................. 34 Design Change Tracking ...................................................................................................... 35
Chapter 6 Constraints and Object Manipulation Rules and Constraints .......................................................................................................... 36 Wire Part Specification ......................................................................................................... 40 Signal Mapping and Cavity Assignation ............................................................................... 41 Ground Manipulation ............................................................................................................ 42 Splice Manipulation ............................................................................................................... 43 Multicore Synthesis ............................................................................................................... 48 Shield Terminations in Capital Integrator ............................................................................. 48 Custom Constraints .............................................................................................................. 49
Chapter 7 Connector Definition/Manipulation Signal Mapping ..................................................................................................................... 51 Create/Delete Cavity ............................................................................................................. 51 Signal Maps and Junction Boxes ......................................................................................... 54 Connector Footprint Definition .............................................................................................. 55 Connector Footprint Assignment .......................................................................................... 56 Backshells and Virtual Connectors ....................................................................................... 59 Holes on Slots ....................................................................................................................... 59 Connector Mapping .............................................................................................................. 60 Combining Devices ............................................................................................................... 63 Slot Integral to Harness ........................................................................................................ 64 Harness Synchronization ...................................................................................................... 65
Chapter 8 Variants and Options Variant and Option Based Device Placement ...................................................................... 66 Option Expressions and Device Placement ......................................................................... 68 Harness Option Assignments ............................................................................................... 70 Option Tagging and Topology Filtering ................................................................................ 71
Chapter 9 Design Reports Configuration Builder ............................................................................................................ 72 Integrator Reporting Facility .................................................................................................. 74 Harness Insight ..................................................................................................................... 77
Chapter 10 Design Validation Design Rule Checks (DRCs) ................................................................................................ 80 Printing Diagrams ................................................................................................................. 83 Copying Integrator Designs .................................................................................................. 84
Chapter 11 MCAD MCAD ................................................................................................................................... 86 Bridge Options ...................................................................................................................... 87 Change Manager .................................................................................................................. 89 Attribute/Property Changes .................................................................................................. 93
Appendix 1 Capital Integrator’s User Interface User Interface Areas ........................................................................................................... A-1 Window Layout Commands ................................................................................................ A-2 Mouse Interactions ............................................................................................................. A-4
Appendix 2 Skeletons Creating a Skeleton ............................................................................................................ A-6 Borders ............................................................................................................................... A-8 Adding Zones to a Border Symbol ...................................................................................... A-9 Properties .......................................................................................................................... A-10 Intelligent Text Placement ................................................................................................ A-11
Appendix 3 Composite Wiring Synthesis Composite Wiring Synthesis ............................................................................................. A-12 Update Inconsistent Harness Options .............................................................................. A-13 Promotion of Pass-Through Options ................................................................................ A-14 Generate Physical Harness Levels................................................................................... A-15 Wiring Synthesis ............................................................................................................... A-16 Combine Identical Harness ............................................................................................... A-17 Max Complexity Vehicle Configurations ........................................................................... A-18
Appendix 4 Design Manipulation Wire Properties ................................................................................................................. A-20 Splice Properties ............................................................................................................... A-21 Decompose Splice ............................................................................................................ A-24 Multicore Properties .......................................................................................................... A-26 Connector Properties ........................................................................................................ A-28
Appendix 5 Footprints Connector Symbol ............................................................................................................ A-29 Device Symbol .................................................................................................................. A-30 Device Part Definition ....................................................................................................... A-31 Connector Footprint Definition .......................................................................................... A-32
Appendix 6 Capital Enterprise Report Getting Started with Capital Enterprise Reporter ............................................................. A-33 Modes of Capital Enterprise Reporter .............................................................................. A-34 Scope of Report Generation ............................................................................................. A-34 Filter Conditions ................................................................................................................ A-34 Connectivity Processor ..................................................................................................... A-35 View Planes ...................................................................................................................... A-36 Library Report Facility ....................................................................................................... A-36
Appendix 7 Report Builder Getting Started with the Report Builder ............................................................................ A-37 Report Builder User Interface ........................................................................................... A-37 Creating an Example Report for Missing Library Parts .................................................... A-38
Capital Capital Integrator Course V2014.1
Chapter 1 Introduction to Capital Integrator Table of Contents:
Page
Capital Integrator Concepts .............................................................................................................................................. 1 Overview .............................................................................................................................................................. 1 Abbreviations Used in This Course ..................................................................................................................... 2 Wiring Synthesis Process .................................................................................................................................... 3 Getting Started .................................................................................................................................................................. 4 Launching Capital Applications ........................................................................................................................... 4 Capital’s User Interface ....................................................................................................................................... 5 Expanding the Browser Tree ............................................................................................................................... 5 Online Help .......................................................................................................................................................... 5 Capital Integrator’s User Interface .................................................................................................................................... 6
Capital Integrator v2014.1 Student Workbook
1999-2016 Mentor Graphics Corporation All rights reserved. This document contains information that is trade secret and proprietary to Mentor Graphics Corporation or its licensors and is subject to license terms. No part of this document may be photocopied, reproduced, translated, distributed, disclosed or provided to third parties without the prior written consent of Mentor Graphics.
This document is for information and instruction purposes. Mentor Graphics reserves the right to make changes in specifications and other information contained in this publication without prior notice, and the reader should, in all cases, consult Mentor Graphics to determine whether any changes have been made. The terms and conditions governing the sale and licensing of Mentor Graphics products are set forth in written agreements between Mentor Graphics and its customers. No representation or other affirmation of fact contained in this publication shall be deemed to be a warranty or give rise to any liability of Mentor Graphics whatsoever. MENTOR GRAPHICS MAKES NO WARRANTY OF ANY KIND WITH REGARD TO THIS MATERIAL INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. MENTOR GRAPHICS SHALL NOT BE LIABLE FOR ANY INCIDENTAL, INDIRECT, SPECIAL, OR CONSEQUENTIAL DAMAGES WHATSOEVER (INCLUDING BUT NOT LIMITED TO LOST PROFITS) ARISING OUT OF OR RELATED TO THIS PUBLICATION OR THE INFORMATION CONTAINED IN IT, EVEN IF MENTOR GRAPHICS CORPORATION HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. RESTRICTED RIGHTS LEGEND 03/97 U.S. Government Restricted Rights. The SOFTWARE and documentation have been developed entirely at private expense and are commercial computer software provided with restricted rights. Use, duplication or disclosure by the U.S. Government or a U.S. Government subcontractor is subject to the restrictions set forth in the license agreement provided with the software pursuant to DFARS 227.72023(a) or as set forth in subparagraph (c)(1) and (2) of the Commercial Computer Software - Restricted Rights clause at FAR 52.227-19, as applicable. Contractor/manufacturer is: Mentor Graphics Corporation 8005 S.W. Boeckman Road, Wilsonville, Oregon 97070-7777. Telephone: 503.685.7000 Toll-Free Telephone: 800.592.2210 Website: www.mentor.com SupportNet: supportnet.mentor.com/ Send Feedback on Documentation: supportnet.mentor.com/doc_feedback_form
TRADEMARKS: The trademarks, logos and service marks ("Marks") used herein are the property of Mentor Graphics Corporation or other third parties. No one is permitted to use these Marks without the prior written consent of Mentor Graphics or the respective third-party owner. The use herein of a thirdparty Mark is not an attempt to indicate Mentor Graphics as a source of a product, but is intended to indicate a product from, or associated with, a particular third party. A current list of Mentor Graphics’ trademarks may be viewed at: www.mentor.com/trademarks. End-User License Agreement: You can print a copy of the End-User License Agreement from: www.mentor.com/eula.
Part Number: 073429
Capital Capital Integrator Training Course V2014.1
Table of Contents Page Chapter 1 Introduction to Capital Integrator Capital Integrator Concepts .................................................................................................... 1 Overview ................................................................................................................................. 1 Wiring Synthesis Process ....................................................................................................... 3 Getting Started ........................................................................................................................ 4 Capital Integrator’s User Interface .......................................................................................... 6
Chapter 2 Creating Integrator Diagrams Getting Started with Capital Integrator ................................................................................... 7 Create a New Design .............................................................................................................. 7 Creating Diagrams .................................................................................................................. 8 Place a Skeleton (System Outline) ....................................................................................... 10 Defining the Topology ........................................................................................................... 11 Create Slots .......................................................................................................................... 11 Define Bundle Routing .......................................................................................................... 11 Defining Harnesses .............................................................................................................. 13 Creating Inline Connectors ................................................................................................... 13 Associating Logical Designs ................................................................................................. 14 Place Devices ....................................................................................................................... 17 Design Assistant ................................................................................................................... 18 Language Translation ........................................................................................................... 18
Chapter 3 Wire Synthesis Wire Synthesis ...................................................................................................................... 19 Generating Wires .................................................................................................................. 20 Integrator Reports ................................................................................................................. 21 Wire Preservation ................................................................................................................. 21 Wire Visualization ................................................................................................................. 21
Chapter 4 Capital AutoView Assist for Integrator Capital AutoView Assist for Integrator (CAVAI) .................................................................... 22 Selecting AVAssist Integrator Specific Preferences ............................................................. 23 Functionally Partitioned Diagrams ........................................................................................ 24 Diagram Partitioning ............................................................................................................. 26 View Generated Diagrams.................................................................................................... 27
Chapter 5 Composite Wiring Synthesis Composite Wiring Synthesis ................................................................................................. 28 Vehicle Models...................................................................................................................... 29 Design Assistant and Signal Route States ........................................................................... 32 Wire Manipulation ................................................................................................................. 33 Wire Synthesis and Shared Objects ..................................................................................... 33 Module Code Definition ........................................................................................................ 34
Creating a Design Revision .................................................................................................. 34 Design Change Tracking ...................................................................................................... 35
Chapter 6 Constraints and Object Manipulation Rules and Constraints .......................................................................................................... 36 Wire Part Specification ......................................................................................................... 40 Signal Mapping and Cavity Assignation ............................................................................... 41 Ground Manipulation ............................................................................................................ 42 Splice Manipulation ............................................................................................................... 43 Multicore Synthesis ............................................................................................................... 48 Shield Terminations in Capital Integrator ............................................................................. 48 Custom Constraints .............................................................................................................. 49
Chapter 7 Connector Definition/Manipulation Signal Mapping ..................................................................................................................... 51 Create/Delete Cavity ............................................................................................................. 51 Signal Maps and Junction Boxes ......................................................................................... 54 Connector Footprint Definition .............................................................................................. 55 Connector Footprint Assignment .......................................................................................... 56 Backshells and Virtual Connectors ....................................................................................... 59 Holes on Slots ....................................................................................................................... 59 Connector Mapping .............................................................................................................. 60 Combining Devices ............................................................................................................... 63 Slot Integral to Harness ........................................................................................................ 64 Harness Synchronization ...................................................................................................... 65
Chapter 8 Variants and Options Variant and Option Based Device Placement ...................................................................... 66 Option Expressions and Device Placement ......................................................................... 68 Harness Option Assignments ............................................................................................... 70 Option Tagging and Topology Filtering ................................................................................ 71
Chapter 9 Design Reports Configuration Builder ............................................................................................................ 72 Integrator Reporting Facility .................................................................................................. 74 Harness Insight ..................................................................................................................... 77
Chapter 10 Design Validation Design Rule Checks (DRCs) ................................................................................................ 80 Printing Diagrams ................................................................................................................. 83 Copying Integrator Designs .................................................................................................. 84
Chapter 11 MCAD MCAD ................................................................................................................................... 86 Bridge Options ...................................................................................................................... 87 Change Manager .................................................................................................................. 89 Attribute/Property Changes .................................................................................................. 93
Appendix 1 Capital Integrator’s User Interface User Interface Areas ........................................................................................................... A-1 Window Layout Commands ................................................................................................ A-2 Mouse Interactions ............................................................................................................. A-4
Appendix 2 Skeletons Creating a Skeleton ............................................................................................................ A-6 Borders ............................................................................................................................... A-8 Adding Zones to a Border Symbol ...................................................................................... A-9 Properties .......................................................................................................................... A-10 Intelligent Text Placement ................................................................................................ A-11
Appendix 3 Composite Wiring Synthesis Composite Wiring Synthesis ............................................................................................. A-12 Update Inconsistent Harness Options .............................................................................. A-13 Promotion of Pass-Through Options ................................................................................ A-14 Generate Physical Harness Levels................................................................................... A-15 Wiring Synthesis ............................................................................................................... A-16 Combine Identical Harness ............................................................................................... A-17 Max Complexity Vehicle Configurations ........................................................................... A-18
Appendix 4 Design Manipulation Wire Properties ................................................................................................................. A-20 Splice Properties ............................................................................................................... A-21 Decompose Splice ............................................................................................................ A-24 Multicore Properties .......................................................................................................... A-26 Connector Properties ........................................................................................................ A-28
Appendix 5 Footprints Connector Symbol ............................................................................................................ A-29 Device Symbol .................................................................................................................. A-30 Device Part Definition ....................................................................................................... A-31 Connector Footprint Definition .......................................................................................... A-32
Appendix 6 Capital Enterprise Report Getting Started with Capital Enterprise Reporter ............................................................. A-33 Modes of Capital Enterprise Reporter .............................................................................. A-34 Scope of Report Generation ............................................................................................. A-34 Filter Conditions ................................................................................................................ A-34 Connectivity Processor ..................................................................................................... A-35 View Planes ...................................................................................................................... A-36 Library Report Facility ....................................................................................................... A-36
Appendix 7 Report Builder Getting Started with the Report Builder ............................................................................ A-37 Report Builder User Interface ........................................................................................... A-37 Creating an Example Report for Missing Library Parts .................................................... A-38
Capital Capital Integrator Course V2014.1
Chapter 1 Introduction to Capital Integrator Table of Contents:
Page
Capital Integrator Concepts .............................................................................................................................................. 1 Overview .............................................................................................................................................................. 1 Abbreviations Used in This Course ..................................................................................................................... 2 Wiring Synthesis Process .................................................................................................................................... 3 Getting Started .................................................................................................................................................................. 4 Launching Capital Applications ........................................................................................................................... 4 Capital’s User Interface ....................................................................................................................................... 5 Expanding the Browser Tree ............................................................................................................................... 5 Online Help .......................................................................................................................................................... 5 Capital Integrator’s User Interface .................................................................................................................................... 6
