control unit for autonomous genset type cam-325
GB GE/FO-150604
CONTROL UNIT FOR AUTONOMOUS GENSET TYPE CAM-325
MAN
START
V~
Hz
h
L1
L2
L3
10 instruments (simultaneous reading of 6 instruments)
380 50 . 0 1322 120 120 120 MAN
AUT
Remote operation with GSM (mobile) telephone
TEST
STOP
OFF / RESET
C
Error messages. Programming and useful signals for genset management.
®
www.elcos.it
TEXT IN: • ITALIAN • ENGLISH • GERMAN • FRENCH • SPANISH • AUTOMATIC SUPERVISION OF FAULTS WITH MESSAGES ON THE DISPLAY • INFORMATION ON 4 PREVENTIVE MAINTENANCES
•REMOTE COMMANDS WITH CONTACTS (STARTUP - STOP) •CLOCK FOR PROGRAMMING THE STARTUP OR STOPPING OF THE GENSET •PROGRAMMING OF PARAMETERS (THRESHOLD, TIMES,
COUNTS ETC.) MADE EASY BY DIPSWITCH • 2 COMPLETELY PROGRAMMABLE FAULTS AVAILABLE (TIMES,
POLARITY, POSSIBILITY OF STOPPING AND MESSAGE ABOUT THE FAULT); • PROGRAMMABLE WEEKLY AUTOTEST ®
Via Naviglio Alto,24/A 43100 PARMA (ITALY) Tel. 0521 772021 Fax 0521 270218 www.elcos.it e-mail: [email protected]
INSTRUCTIONS IN BRIEF CUMULATIVE ALARM
PUSH TO START THE ENGINE WHEN THE CONTROL IS IN MANUAL OPERATION
PUSH BRIEFLY TO SHOW THE INSTRUMENTS, PUSH FOR LONG TIME TO CHECK THE FUNCTIONING OF THE LED TEST. SILENCING OF GENERAL ALARM.
DISPLAY
MAN
V~
Hz
h
L1
L2
L3
START PRESS TO SELECT THE FOLLOWING FUNCTIONS: • MANUAL • AUTOMATIC • TEST RESET: - RESETS THE CONTROL UNIT - STOPS THE GENSET - PREVENTS STARTING
MAN
PUSH TO STOP THE ENGINE WHEN THE CONTROL UNIT IS IN MANUAL OPERATION
AUT TEST
STOP
OFF / RESET
C
®
www.elcos.it CALL IS CLOSED ENGINE IS RUNNING
INSTRUMENTS DISPLAYED:
GENERATOR VOLTAGE IS PRESENT
TECHNICAL DATA
THREE GENERATOR AMMETERS
BATTERY VOLTMETER
GENERATOR VOLTMETER
HOUR METER
GENERATOR FREQUENCY METER
STARTUP COUNTER
-DEGREE OF REAR PROTECTION
IP20
VOLTAMMETER
TACHOMETER
-DEGREE OF FRONT PROTECTION
IP64
-BATTERY SUPPLY
-DIMENSIONS
GSM MODEM MODEM GSM
9 ÷ 32 VDC
VOLTAGE
144 X 96X 49mm
REMOTE OPERATION WITH (mobile) telephone via GSM modem REMOTE OPERATION IS ACTIVATED
® PARMA ITALY www.elcos.it
WITH SMS MESSAGES
WHEN:
The generator set is in alarm state. MAN
START
V~
Hz
h
L1
L2
L3
Periodic maintenance operations must
380 50 . 0 1322 120 120 120
be carried out MAN
POSSIBILITY OF:
AUT TEST
STOP
A start command and a stop command;
OFF / RESET
C
viewing the fundamental instruments ®
www.elcos.it
CAM-325
indicated by the control unit
CONTROL UNIT FOR AUTONOMOUS GENSET TYPE CAM-325
MAN
START
V~
Hz
h
L1
L2
L3
10 instruments (simultaneous reading of 6 instruments)
380 50 . 0 1322 120 120 120 MAN
AUT
Remote operation with GSM (mobile) telephone
TEST
STOP
OFF / RESET
C
Error messages. Programming and useful signals for genset management.
®
www.elcos.it
TEXT IN: • ITALIAN • ENGLISH • GERMAN • FRENCH • SPANISH • AUTOMATIC SUPERVISION OF FAULTS WITH MESSAGES ON THE DISPLAY • INFORMATION ON 4 PREVENTIVE MAINTENANCES
•REMOTE COMMANDS WITH CONTACTS (STARTUP - STOP) •CLOCK FOR PROGRAMMING THE STARTUP OR STOPPING OF THE GENSET •PROGRAMMING OF PARAMETERS (THRESHOLD, TIMES,
COUNTS ETC.) MADE EASY BY DIPSWITCH • 2 COMPLETELY PROGRAMMABLE FAULTS AVAILABLE (TIMES,
POLARITY, POSSIBILITY OF STOPPING AND MESSAGE ABOUT THE FAULT); • PROGRAMMABLE WEEKLY AUTOTEST ®
Via Naviglio Alto,24/A 43100 PARMA (ITALY) Tel. 0521 772021 Fax 0521 270218 www.elcos.it e-mail: [email protected]
INSTRUCTIONS IN BRIEF CUMULATIVE ALARM
PUSH TO START THE ENGINE WHEN THE CONTROL IS IN MANUAL OPERATION
PUSH BRIEFLY TO SHOW THE INSTRUMENTS, PUSH FOR LONG TIME TO CHECK THE FUNCTIONING OF THE LED TEST. SILENCING OF GENERAL ALARM.
DISPLAY
MAN
V~
Hz
h
L1
L2
L3
START PRESS TO SELECT THE FOLLOWING FUNCTIONS: • MANUAL • AUTOMATIC • TEST RESET: - RESETS THE CONTROL UNIT - STOPS THE GENSET - PREVENTS STARTING
MAN
PUSH TO STOP THE ENGINE WHEN THE CONTROL UNIT IS IN MANUAL OPERATION
AUT TEST
STOP
OFF / RESET
C
®
www.elcos.it CALL IS CLOSED ENGINE IS RUNNING
INSTRUMENTS DISPLAYED:
GENERATOR VOLTAGE IS PRESENT
TECHNICAL DATA
THREE GENERATOR AMMETERS
BATTERY VOLTMETER
GENERATOR VOLTMETER
HOUR METER
GENERATOR FREQUENCY METER
STARTUP COUNTER
-DEGREE OF REAR PROTECTION
IP20
VOLTAMMETER
TACHOMETER
-DEGREE OF FRONT PROTECTION
IP64
-BATTERY SUPPLY
-DIMENSIONS
GSM MODEM MODEM GSM
9 ÷ 32 VDC
VOLTAGE
144 X 96X 49mm
REMOTE OPERATION WITH (mobile) telephone via GSM modem REMOTE OPERATION IS ACTIVATED
® PARMA ITALY www.elcos.it
WITH SMS MESSAGES
WHEN:
The generator set is in alarm state. MAN
START
V~
Hz
h
L1
L2
L3
Periodic maintenance operations must
380 50 . 0 1322 120 120 120
be carried out MAN
POSSIBILITY OF:
AUT TEST
STOP
A start command and a stop command;
OFF / RESET
C
viewing the fundamental instruments ®
www.elcos.it
CAM-325
indicated by the control unit
