DiaLogue Premium Integrated Amplifier
DiaLogue Premium Integrated Amplifier The DiaLogue Premium series has set the bar for what an all-tube integrated amp should be: sexy... exotic... and built with exceptional features not found in any other amp in its class including: • Adaptive AutoBias. As with all PrimaLuna amps, you never have to worry about biasing your amp ever again. You can even just flip a switch, and the board is recalibrated for EL34s or KT88s (or KT120s). Every DiaLogue Premium Series amplifier can be ordered with either set of power tubes installed. • All critical signal paths are wired with silver-plated, oxygen-free continuous crystal (OCC) copper with a Teflon dielectric for superior signal speed and increased clarity. • Premium parts from around the world including ALPS volume control and Takman resistors from Japan, and SCR tin foil capacitors made in France. • Exclusive AC Offset Killer. This piece reduces transformer hum, resulting in lower noise and the blackest background ever. • New front-end circuitry. The DiaLogue Premium uses
three 12AU7 tubes per channel, plus further refinements to the ProLogue Premium circuit. The result is even lower distortion and increased bandwidth. • Dedicated subwoofer output. If you’re favorite sub only uses line-level inputs, such as the JL Audio subwoofers, the DiaLogue Premium Integrated makes it simple to use! • All the features found in the award-winning DiaLogue Series: Full-function remote, Triode / Ultra-linear switching, Home theater bypass circuitry, all in an amp that is point-to-point wired and designed conservatively to extend the life of your tubes as well as critical components inside the amp. The DiaLogue Premium Series also includes the same innovative circuits found in the ProLogue Premium series, that protect the amp at every level.
Output Ultra-linear (8 Ohms, 1% THD):
43 watts x 2 (KT120), 36 watts x 2 (KT88), 32 watts x 2 (EL34)
Output Triode (8 Ohms, 1% THD):
12 watts (KT120), 13 watts (EL34 & KT88)
Freq. Response (+/- 1dB):
5Hz-69kHz (KT120), 5Hz-32kHz (KT88), 5Hz-30kHz (EL34)
THD (1W/1kHz):
0.2% (KT120), 0.25% (KT88), 0.14% (EL34)
S/N Ratio:
81 dB (KT120 & KT88), 79 dB (EL34)
Input Sensitivity:
280mV (KT120), 240mV (KT88), 230mV (EL34)
Input Impedance:
100k Ohm
Power Consumption:
255 watts
Dimensions:
16 “ x 8.3 “ x 15.4” (WxHxD)
Weight:
63.8 lbs
Inputs:
5 pair RCA / 1 pair HT bypass
Outputs:
4 & 8 Ohm output taps, RCA Subwoofer output
Tube Compliment:
6 - 12AU7, 4 - EL34, KT88 or KT120 tubes also available
three 12AU7 tubes per channel, plus further refinements to the ProLogue Premium circuit. The result is even lower distortion and increased bandwidth. • Dedicated subwoofer output. If you’re favorite sub only uses line-level inputs, such as the JL Audio subwoofers, the DiaLogue Premium Integrated makes it simple to use! • All the features found in the award-winning DiaLogue Series: Full-function remote, Triode / Ultra-linear switching, Home theater bypass circuitry, all in an amp that is point-to-point wired and designed conservatively to extend the life of your tubes as well as critical components inside the amp. The DiaLogue Premium Series also includes the same innovative circuits found in the ProLogue Premium series, that protect the amp at every level.
Output Ultra-linear (8 Ohms, 1% THD):
43 watts x 2 (KT120), 36 watts x 2 (KT88), 32 watts x 2 (EL34)
Output Triode (8 Ohms, 1% THD):
12 watts (KT120), 13 watts (EL34 & KT88)
Freq. Response (+/- 1dB):
5Hz-69kHz (KT120), 5Hz-32kHz (KT88), 5Hz-30kHz (EL34)
THD (1W/1kHz):
0.2% (KT120), 0.25% (KT88), 0.14% (EL34)
S/N Ratio:
81 dB (KT120 & KT88), 79 dB (EL34)
Input Sensitivity:
280mV (KT120), 240mV (KT88), 230mV (EL34)
Input Impedance:
100k Ohm
Power Consumption:
255 watts
Dimensions:
16 “ x 8.3 “ x 15.4” (WxHxD)
Weight:
63.8 lbs
Inputs:
5 pair RCA / 1 pair HT bypass
Outputs:
4 & 8 Ohm output taps, RCA Subwoofer output
Tube Compliment:
6 - 12AU7, 4 - EL34, KT88 or KT120 tubes also available
