en-st224rgb - Metalight


When connecting to an LED RGB Controller ensure that the polarity is correct. ... Insure that ALL electrical connections are tight with no loose strands, including ...

GB

GB







EN-ST224RGB - 24V DC RGB HIGH DENSITY FLEXIBLE LED STRIP LIGHT PLEASE READ THESE INSTRUCTIONS CAREFULLY BEFORE INSTALLATION EN-ST224 - 24V DC SINGLE COLOUR HIGH DENSITY FLEXIBLE LED STRIP LIGHT

LEAVE A COPY FOR THE USER / MAINTENANCE ENGINEER FOR FUTURE REFERENCE PLEASE READ THESE INSTRUCTIONS CAREFULLY BEFORE INSTALLATION LEAVE A COPY FOR THE USER / MAINTENANCE ENGINEER FOR FUTURE REFERENCE

IMPORTANT INSTALLATION INFORMATION • • • • • • •

Installation should be carried out in accordance with the latest edition of the National Wiring Regulations. Only Qualified Electricians should install this luminaire. LED Strip operates at 24V DC. •The Installation should be carried out in accordance with the latest edition of the National Wiring Regulations. If in doubt, consult a qualified electrician. •A 24V The LED Strip operates at 24V DC. DC LED Driver is required (not included). A 24V RGB Controller is required (not included). •When When connecting to an LED Driver ensure that the polarity is correct. The strip may be damaged if connected incorrectly. connecting to an LED RGB Controller ensure that the polarity is correct. The strip may be damaged if connected incorrectly. •Before For runs over 10 metres, the individual strips should be connected in parallel. commencing installation or maintenance, ensure electricity is switched off at the mains. • A heat gun is required for installation (not supplied). Insure that ALL electrical connections are tight with no loose strands, including factory connections. IMPORTANT INSTALLATION INFORMATION



24V DC LED Flexible Strip Light and Accessories INSTALLATION INSTRUCTIONS

Before commencing installation or maintenance, ensure electricity is switched off at the mains. EN-ST224RGB High Density RGB Flexible LED strip light 1. A 24V DC LED Driver must be used with this LED flexible strip. EN-STRGBA Connector 2. The EN-ST224B is used to connect the strip to a 24V DC Constant Voltage Driver. See Diagram 1. EN-STRGBB Wired Connector •

Align the connector and push into place. .

INSTALLATION INSTRUCTIONS • Connect the wires from the connector to the LED driver; ensure that the polarity is correct. 1. 2. 3. 4. 5. 6. 7.

8.

Isolate the mains supply before installation or maintenance. • from As an alternative to using the EN-ST224B two wires can be soldered to the +ve and –ve solder tags on the LED strip and connected to the LED Driver. Ensure A 24V DCthat the polarity is correct. LED Driver must be used with this strip. See Driver selection table below. 3. The EN-ST224A is used to join two pieces of strip together. See Diagram 2. A 24V DC LED RGB Controller, i.e. AU-RGB1224A, must be used with this LED flexible strip. • The strip must be cut at a cut-point. To install the LED Driver and LED Controller please refer to their own instructions. • Push the ends of the strip to be connected together into the EN-ST224A connector, A maximum of 5m of can be connected in a continuous length. For runs of over 5m connect individual lengths in parallel. • Ensure that the polarity matches, i.e +ve to +ve and –ve to –ve. The To install the LED Driver please refer to the instructions supplied with the LED Driver. EN-STRGBA is used to connect the strip to a 24V DC RGB Controller, See Diagram 1. 4. • When the installation is complete switch on the mains supply. Align the connector and push into place. . 5. Connect the wires from the connector to the Controller; ensure that the polarity is correct. • Diagram 1 EN-STRGBB is used to join two pieces of strip together. See Diagram 2. The + • The strip must be240V~ cut at a markedL cut-point.+ EN-ST224 LED Flexible Strip N _ _ • Push the ends of the strip to be connected together into the EN-STRGBA connector, • Ensure that the polarity matches, i.e. red to red, blue to blue etc. When the installation is complete switch on the mains supply.

Diagram 1 - Connections Diagram 2

24V DC Constant Voltage LED 240V~ Driver 50Hz

Align strip and push into connector

Output 24V DC

24V DC LED Driver

Align the strip and push into Align strip and push into connector the connector

24V DC

EN-ST224B

Input 24V DC

AU-RGB1224A RGB Controller

EN-ST224RGB LED Flexible Strip Align strip and push into connector

EN-STRGBB

+ + EN-ST224 Flexible Strip EN-ST224 Flexible Strip Align the strip and push into - Align - the strip and push into the connector the connector Diagram 2 – Joining strip EN-ST224RGB EN-ST224RGB EN-ST224A LED Flexible Strip LED Flexible Strip EN-STRGBA Environmental Protection (W.E.E.E.) – Enlite’s WEEE Reg.No. WEE/BG0130YX (UK Only)

Waste Electrical & Electronic Equipment Regulations (WEEE) requires that any of our products showing this marking (left) must not

Environmental Protection (W.E.E.E.) – Enlite’s WEEE Reg.No. WEE/BG0130YX (UK Only) be disposed of with other household or commercial waste. Enlite does not levy any WEEE disposal charges to its customers for Waste Electrical & Electronic Equipment Regulations (WEEE) requires that any of our products showing this marking (left) must not be disposed of with affected WEEE related products. To prevent possible harm to the environment or human health from uncontrolled waste disposal, please other household or commercial waste. Enlite does not levy any WEEE disposal charges to its customers for affected WEEE related products. To prevent separate any such product from other waste types and recycle it responsibly at your local facilities. Check with your Local Authority, possible harm to the environment or human health from uncontrolled waste disposal, please separate any such product from other waste types and recycle it responsibly at your local facilities. Check with your Local Authority, Recycling Centre or retailer for recycling advice. If, when you purchased any Enlite Recycling Centre or retailer for recycling advice. If, when you purchased any Enlite product, your supplier included a WEEE disposal fee, product, your supplier included a WEEE disposal fee, you should then contact your supplier for advice on his take back of the product for the correct youdisposal. should then contact your supplier for advice on his take back of the product for the correct disposal. GUARANTEE

GUARANTEE TheseThese products are guaranteed for 3 years from the date of purchase. The guarantee is invalid in the case of improper use, installation, tampering, products are guaranteed for 3 years from the date of purchase. The guarantee is invalid in the case of improper use, installation, tampering, removal of the removal thelabel, Q.C.installation date label, in anenvironment improper orworking environment not ofaccording toWiring the current edition of this the National Q.C.of date in aninstallation improper working installation not accordingor to installation the current edition the National Regulations. Should fail during Should the guarantee period it will replaced of charge, subject return of the faulty unit. Enlite does notinstallation accept Wiringproduct Regulations. this product failbeduring thefree guarantee periodtoit correct will beinstallation replacedand free of charge, subject to correct and return responsibility for any installation costs associated with the replacement of this product. These rights are in addition to your statutory rights in your country of of thepurchase. faulty unit. Enlite does for any costs associated with the replacement of this product. These rights are in Enlite reserves thenot rightaccept to alter responsibility specifications without priorinstallation notice. addition to your statutory rights in your country of purchase. Enlite reserves the right to alter specifications without prior notice. UK Tel: +44 (0) 1727 83 66 11 Email: [email protected]

France Tel: +33 (0) 1 30 11 11 88 Email: [email protected]

UAE Australia South Africa Tel: +971 (0) 4 328 5489 Tel: +61 (0) 2 9882 6000 Tel: +27 (0) 11 234 4878 Email: [email protected] Email: [email protected] Email: [email protected] Website: www.enlitelighting.com Website: www.enlitelighting.com

Document - EN-ST224RGB_V1_17 ENG Document version version – EN-ST224_V1_17 ENG&FRE.DOC

Recommend Documents