Final Catalog 2005.indd - Steamshop


Aug 1, 2018 - Email [email protected] www.schaeferbrush.com ... The small symbols represent a cross section of a twisted brush.

Schaefer Brush Tube Brushes

Section 10 Custom brushes can be made to your specifications. Call for details!

Tube br

Twisted Wire Brushes

The small symbols represent a cross section of a twisted brush. Single Spiral/Single Stem (2 wire) Brush bristles are twisted between two stem wires with a single wire on each side.

Single Spiral/Double Stem (4 wire) Brush bristles are twisted between four stem wires with two stem wires on each side.

Double Spiral/Double Stem (4 wire) Brush bristles are twisted between four stem wires with two layers of bristle. Each layer is perpendicular to the other with a single stem wire in each quadrant.

Safety Equipment & Requirements Safety goggles or face shields must be worn by operators and/or personnel in the working area of brushes. Appropriate protective clothing and equipment must be used where a possibility of injury exists which could be prevented by using such clothing or equipment.

WHEN USING BRUSHES WEAR GOGGLES OR FACE SHIELDS!

Speeds

Observe all speed restrictions indicated on brushes, containers, labels, or printed literature. “MSFS” means “Maximum Safe Free Speed” (RPM); that is, spinning free with no work applied. For safety, never exceed “MSFS”. Consult our office or representative for maximum safe speeds pertaining to your application, if not predetermined.

Guards

Keep all machine guards in place.

Short Handle Nylon & Bristle Tube Brushes Natural Bristle Tube Brushes Single Spiral/Single Stem

Nylon Tube Brushes Single Spiral/Single Stem

Part #

Dia. X Brush Part

Overall Length

Fill Dia.

14504 14510 14517 14529

1/4” x 2” 3/8” x 2” 1/2” x 3” 3/4” x 3”

6-1/2” 6-1/2” 9” 9”

.010 .010 .012 .008



Pack Pack Weight 12 12 12 12

0.7 0.7 0.9 1.1

Part #

Dia. X Brush Part

Overall Length

Pack

Pack Weight

10209 10210 10220 10211 10221 10212 10214 10213

1/4” x 2” 3/8” x 2” 3/8” x 2” 1/2” x 3” 1/2” x 3” 3/4” x 3” 3/4” x 3” 1” x 4”

6-1/2” 6-1/2” 9” 9” 12” 9” 12” 12”

12 12 12 12 12 12 12 12

0.8 0.8 0.9 0.8 1.1 1.1 1.2 1.3

1101 S. Prairie Ave. PO Box 148 Waukesha, WI 53187 Phone 262-547-3500 1-800-347-3501 Fax 262-547-3927 Email [email protected] www.schaeferbrush.com

Page 43

Long Handle Nylon & Bristle Tube Brushes Natural Bristle Tube Brushes Single Spiral/Single Stem

Nylon Tube Brushes Single Spiral/Single Stem

Part #

Dia. X Brush Part

Overall Length

Fill Dia

Pack

Pack Weight

14506 14509 14512 14515 14518 14520 14524 14530 14533 14539 14547 14565 14567 14573 14582 14588

1/4” x 2” 5/16” x 2” 3/8” x 2” 7/16” x 2” 1/2” x 3” 1/2” x 3” 5/8” x 3” 3/4” x 3” 3/4” x 3” 1” x 4” 1-1/4” x 4” 1-1/2” x 4” 1-1/2” x 4” 1-3/4” x 4” 2” x 4” 2-1/4” x 4”

15” 15” 15” 15” 15” 30” 15” 15” 30” 15” 15” 15” 36” 15” 15” 36”

.010 .010 .010 .010 .012 .012 .012 .012 .008 .014 .014 .016 .012 .016 .012 .014

12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12

0.7 0.8 1.1 1.1 1.1 3.0 1.1 1.3 3.0 1.5 1.5 1.8 3.5 1.8 2.0 3.5

Part #

Dia. X Brush Part

Overall Length

Pack

Pack Weight

10222 10223 10224 10216 10217 10218 10225 10226

1/2” x 3” 1/2” x 3” 1/2” x 3” 1” x 4” 1-1/4” x 4” 1-1/2” x 4” 1-3/4” x 4” 2” x 4”

18” 24” 36” 18” 18” 18” 18” 18”

12 12 12 12 12 12 12 12

1.2 1.3 2.3 1.8 1.9 2.0 2.1 2.3

Short Handle Wire Tube Brushes Stainless Steel Single Spiral/Single Stem

Part #

Fill Dia.

Brush Dia.

Part #

Fill Dia.

Brush Length

Overall Length

Pack

Pack Weight

01000 01001 01002 01003 01004 01005 01006 01007 01008 01009 01010

.003 .003 .003 .004 .005 .005 .005 .005 .005 .005 .005

1/8” 3/16” 1/4” 5/16” 3/8” 7/16” 1/2” 5/8” 3/4” 7/8” 1”

01020 01021 01022 01023 01024 01025 01026 01027 01028 01029 01030

.005 .005 .005 .005 .006 .006 .006 .007 .007 .007 .008

1” 1-1/2” 1-1/2” 1-1/2” 2” 2” 2” 2-1/2” 2-1/2” 2-1/2” 2-1/2”

6” 7” 7” 7” 8” 8” 8” 9” 9” 10” 10”

12 12 12 12 12 12 12 12 12 12 12

0.7 0.7 0.7 0.7 0.8 0.8 0.8 1.1 1.1 1.3 1.3

Brass Single Spiral/Single Stem

Page 44



Part #

Fill Dia.

Brush Dia

Brush Length

Overall Length

Pack

Pack Weight

01042 01043 01044 01045 01046 01047 01048 01049 01050

.003 .003 .004 .004 .004 .005 .005 .005 .005

1/4” 5/16” 3/8” 7/16” 1/2” 5/8” 3/4” 7/8” 1”

1-1/2” 1-1/2” 2” 2” 2” 2-1/2” 2-1/2” 2-1/2” 2-1/2”

7” 7” 8” 8” 8” 9” 9” 10” 10”

12 12 12 12 12 12 12 12 12

.7 .7 .8 .8 .8 1.1 1.1 1.3 1.3

1101 S. Prairie Ave. PO Box 148 Waukesha, WI 53187 Phone 262-547-3500 1-800-347-3501 Fax 262-547-3927 Email [email protected] www.schaeferbrush.com

Long Handle Wire Tube Brushes Stainless Steel or Brass Single Spiral/Single Stem

Stainless Steel Double Spiral/Double Stem

3” brush part with long handle.

3” brush part with long handle, extra heavy handle, filled with medium stiff wire.

ST/ST Part #

Fill Dia.

Brass Part #

Fill Dia.

Brush Dia.

Overall Length

Pack

Pack Weight

14402 14404 14406 14408 14410 14412 14414 14416 14418

.005 .005 .006 .006 .007 .007 .007 .007 .007

14602 14604 14606 14608 14610 14612 14614 14616 14618

.005 .005 .006 .006 .006 .006 .006 .008 .008

1/4” 3/8” 1/2” 5/8” 3/4” 7/8” 1” 1-1/4” 1-1/2”

15” 15” 15” 15” 15” 15” 15” 15” 15”

12 12 12 12 12 12 12 12 12

1.1 1.3 1.5 1.8 1.8 2.0 2.0 2.0 2.1

ST/ST Part #

FIll Dia.

Brass Part #

Fill Dia.

Brush Dia.

Overall Length

Pack

Pack Weight

14442 14444 14446 14448 14450 14452 14454 14456 14458

.005 .005 .006 .006 .007 .007 .007 .007 .009

14642 14644 14646 14648 14650 14652 14654 14656 14658

.005 .005 .006 .006 .006 .006 .006 .008 .008

1/4” 3/8” 1/2” 5/8” 3/4” 7/8” 1” 1-1/4” 1-1/2”

27” 27” 27” 27” 27” 27” 27” 27” 27”

12 12 12 12 12 12 12 12 12

1.5 1.8 2.3 2.7 2.7 2.9 2.9 2.9 3.0

Part #

Brush Dia.

Overall Length

Fill Dia.

Pack

Pack Weight

24404 24408 24412 24416

1/2” 3/4” 1” 1-1/2”

15” 15” 15” 15”

.006 .007 .009 .009

12 12 12 12

2.5 3.0 3.2 3.5

WHEN USING BRUSHES WEAR GOGGLES OR FACE SHIELDS!

Bright White Nylon Tube Brushes Tube Brushes - Single Spiral/Double Stem “Food Grade” white nylon tube brushes. FDA approved nylon. 1/4” male pipe thread nipple. Individually sealed in a poly bag. Use the following accessories with the brushes below: Fiberglass Rods 30663, 30664 or 30666, Twisted Steel Extension Handles 31438, 31448 or 31458, Twisted Steel Handle With Ring 30328, 30438, 30548 or 30658, Nylon Rod 36114, 36114-4, 36114S, 36114S-4.

WHEN USING BRUSHES WEAR GOGGLES OR FACE SHIELDS!

Premium Bright White - Stainless Steel Stem/Nipples Part #

Brush Dia.

Brush Length

Fill Dia.

Pack

42602 42604 42606 42608 42610 42614 42618 42622 42630

1” 1-1/2” 2” 2-1/2” 3” 4” 5” 6” 8”

4-1/2” 4-1/2” 4-1/2” 4-1/2” 4-1/2” 4-1/2” 4-1/2” 4-1/2” 4-1/2”

.018 .020 .022 .025 .028 .036 .036 .045 .060

1 1 1 1 1 1 1 1 1



Pack Weight .04 .04 .04 .06 .06 .06 .22 .30 .38

Economy Bright White - Galvanized Stem/Nipples Part #

Brush Dia.

Brush Length

Fill Dia.

Pack

42502 42504 42506 42508 42510 42514 42518 42522 42530

1” 1-1/2” 2” 2-1/2” 3” 4” 5” 6” 8”

4-1/2” 4-1/2” 4-1/2” 4-1/2” 4-1/2” 4-1/2” 4-1/2” 4-1/2” 4-1/2”

.018 .020 .022 .025 .028 .036 .036 .045 .060

1 1 1 1 1 1 1 1 1

1101 S. Prairie Ave. PO Box 148 Waukesha, WI 53187 Phone 262-547-3500 1-800-347-3501 Fax 262-547-3927 Email [email protected] www.schaeferbrush.com

Pack Weight .04 .04 .04 .06 .06 .06 .22 .30 .38 Page 45

Adjustable Condenser Cleaners Stainless steel wire scrapers with 1/4”-28 female threads. Part #

Size

Pack

Pack Weight

00691 00692 00693 00694

5/16” to 3/8” 3/8” to 1/2” 1/2” to 5/8” 5/8” to 1”

1 1 1 1

.06 .06 .12 .12

Condenser Fin Whisk Brush Plastic handle whisk for cleaning condenser fins and evaporators - A whisk with a hundred uses.

Can be custom pad printed with your name & logo. Ask for details! Part #

Brush Width

Trim

Overall Length

Pack

Pack Weight

02026

3”

2-1/8”

6-1/2”

24

1.35

Condenser Tube Brushes Stainless Steel Double Spiral/Double Stem Recommended for stainless steel tubes. 1/4” and 5/16” dia. Brushes have a nipple with 8-32 female thread (use accessories 13042 or 13044). 3/8” thru 1” dia. Brushes have a nipple with 12-24 female thread (use accessories 13002 or 13003).

WHEN USING BRUSHES WEAR GOGGLES OR FACE SHIELDS!

Stainless Steel Extra Stiff Double Spiral/Double Stem 1/8” male pipe thread (use accessory 13005).

Part #

Female Thread

Brush Dia.

Brush Length

Fill Dia.

Pack

Pack Weight

43802 43803 43804 43807 43810 43813 43816 43819 43822 43825 43828 43831 43833

8-32 8-32 12-24 12-24 12-24 12-24 12-24 12-24 12-24 12-24 12-24 12-24 12-24

1/4” 5/16” 3/8” 7/16” 1/2” 9/16” 5/8” 11/16” 3/4” 13/16” 7/8” 15/16” 1”

3” 3” 4” 4” 4” 4” 4” 4” 4” 4” 4” 4” 4”

.005 .005 .005 .005 .006 .006 .005 .006 .006 .007 .007 .009 .009

1 1 1 1 1 1 1 1 1 1 1 1 1

.06 .06 .10 .10 .10 .10 .10 .14 .14 .16 .16 .16 .16

Part #

Male Thread

Brush Dia.

Brush Length

Fill Dia.

Pack

Pack Weight

43404 43405 43406 43407 43408 43411

1/8” 1/8” 1/8” 1/8” 1/8” 1/8”

1/2” 5/8” 3/4” 7/8” 1” 1-1/8”

4” 4” 4” 4” 4” 4”

.007 .009 .009 .009 .009 .009

1 1 1 1 1 1

.10 .11 .12 .13 .14 .15

All condenser tube brushes are boxed individually!

Page 46



1101 S. Prairie Ave. PO Box 148 Waukesha, WI 53187 Phone 262-547-3500 1-800-347-3501 Fax 262-547-3927 Email [email protected] www.schaeferbrush.com

Condenser Tube Brushes Nylon - Single Spiral/Single Stem

Recommended for cleaning all tubes where deposits are light. 1/4” and 5/16” dia. brushes with female couplings have 8-32 threads (use accessories 13042 or 13044), while 3/8” through 1” dia. have 12-24 female threads (use accessories 13002 or 13003). 1/4”, 5/16”, and 3/8” dia. brushes with male couplings have 8-32 threads (use accessory 13042), while 7/16” through 1” dia. have 1/4”-28 male threads (use accessory 13010). Female Female Brush Brush Fill Pack Male Male Brush Brush Part # Thread Dia. Length Dia. Pack Weight Part # Thread Dia. Length 43702 8-32 1/4” 3” .014 1 .04 93702 8-32 1/4” 3” 43703 8-32 5/16” 3” .014 1 .04 93703 8-32 5/16” 3” 43704 12-24 3/8” 4” .016 1 .08 93704 8-32 3/8” 4” 43707 12-24 7/16” 4” .016 1 .10 93707 1/4”-28 7/16” 4” 43710 12-24 1/2” 4” .018 1 .10 93710 1/4”-28 1/2” 4” 43713 12-24 9/16” 4” .018 1 .10 93713 1/4”-28 9/16” 4” 43716 12-24 5/8” 4” .018 1 .10 93716 1/4”-28 5/8” 4” 43719 12-24 11/16” 4” .020 1 .10 93719 1/4”-28 11/16” 4” 43722 12-24 3/4” 4” .020 1 .10 93722 1/4”-28 3/4” 4” 43725 12-24 13/16” 4” .020 1 .10 93725 1/4”-28 13/16” 4” 43728 12-24 7/8” 4” .022 1 .10 93728 1/4”-28 7/8” 4” 43731 12-24 15/16” 4” .022 1 .10 93731 1/4”-28 15/16” 4” 43733 12-24 1” 4” .022 1 .10 93733 1/4”-28 1” 4”

Fill Dia.

Pack

Pack Weight

.014 .014 .016 .016 .018 .018 .018 .020 .020 .020 .022 .022 .022

1 1 1 1 1 1 1 1 1 1 1 1 1

.04 .04 .08 .10 .10 .10 .10 .10 .10 .10 .10 .10 .10

Fill Dia.

Pack

Pack Weight

.004 .004 .004 .005 .006 .005 .005 .006 .006 .006 .008 .008 .008

1 1 1 1 1 1 1 1 1 1 1 1 1

.06 .06 .10 .10 .10 .14 .14 .14 .14 .16 .16 .16 .16

Fill Dia.

Pack

Pack Weight

.005 .005 .005 .005 .006 .006 .006 .006 .006 .007 .007 .009 .009

1 1 1 1 1 1 1 1 1 1 1 1 1

.02 .06 .10 .10 .10 .10 .14 .14 .14 .14 .14 .16 .16

Brass - Single Spiral/Double Stem

Recommended for brass or copper tubes. 1/4” and 5/16” dia. brushes with female couplings have 8-32 threads (use accessories 13042 or 13044), while 3/8” through 1” dia. have 12-24 female threads (use accessories 13002 or 13003). 1/4”, 5/16”, and 3/8” dia. brushes with male couplings have 8-32 threads (use accessory 13042), while 7/16” through 1” dia. have 1/4”-28 threads (use accessory 13010). Male Male Brush Brush Female Female Brush Brush Fill Pack Part # Thread Dia. Length Part # Thread Dia. Length Dia. Pack Weight 93602 8-32 1/4” 3” 43602 8-32 1/4” 3” .004 1 .06 93603 8-32 5/16” 3” 43603 8-32 5/16” 3” .004 1 .06 93604 8-32 3/8” 4” 43604 12-24 3/8” 4” .004 1 .10 93607 1/4”-28 7/16” 4” 43607 12-24 7/16” 4” .005 1 .10 93610 1/4”-28 1/2” 4” 43610 12-24 1/2” 4” .006 1 .10 93613 1/4”-28 9/16” 4” 43613 12-24 9/16” 4” .005 1 .14 93616 1/4”-28 5/8” 4” 43616 12-24 5/8” 4” .005 1 .14 93619 1/4”-28 11/16” 4” 43619 12-24 11/16” 4” .006 1 .14 93622 1/4”-28 3/4” 4” 43622 12-24 3/4” 4” .006 1 .14 93625 1/4”-28 13/16” 4” 43625 12-24 13/16” 4” .006 1 .16 93628 1/4”-28 7/8” 4” 43628 12-24 7/8” 4” .008 1 .16 93631 1/4”-28 15/16” 4” 43631 12-24 15/16” 4” .008 1 .16 93633 1/4”-28 1” 4” 43633 12-24 1” 4” .008 1 .16

Stainless Steel - Single Spiral/Double Stem

Recommended for stainless steel tubes. 1/4” and 5/16” dia. brushes with female couplings have 8-32 threads (use accessories 13042 or 13044), while 3/8” through 1” dia. have 12-24 female threads (use accessories 13002 or 13003). 1/4”, 5/16”, and 3/8” dia. brushes with male couplings have 8-32 threads (use accessory 13042), while 7/16” through 1” dia. have 1/4”-28 threads (use accessory 13010). Male Male Brush Brush Female Female Brush Brush Fill Pack Part # Thread Dia. Length Part # Thread Dia. Length Dia. Pack Weight 43502 43503 43504 43507 43510 43513 43516 43519 43522 43525 43528 43531 43533

8-32 8-32 12-24 12-24 12-24 12-24 12-24 12-24 12-24 12-24 12-24 12-24 12-24

1/4” 5/16” 3/8” 7/16” 1/2” 9/16” 5/8” 11/16” 3/4” 13/16” 7/8” 15/16” 1”

3” 3” 4” 4” 4” 4” 4” 4” 4” 4” 4” 4” 4”

.005 .005 .005 .005 .006 .006 .006 .006 .006 .007 .007 .009 .009



1 1 1 1 1 1 1 1 1 1 1 1 1

.02 .06 .10 .10 .10 .10 .14 .14 .14 .14 .14 .16 .16

93502 93503 93504 93507 93510 93513 93516 93519 93522 93525 93528 93531 93533

8-32 8-32 8-32 1/4”-28 1/4”-28 1/4”-28 1/4”-28 1/4”-28 1/4”-28 1/4”-28 1/4”-28 1/4”-28 1/4”-28

1/4” 5/16” 3/8” 7/16” 1/2” 9/16” 5/8” 11/16” 3/4” 13/16” 7/8” 15/16” 1”

1101 S. Prairie Ave. PO Box 148 Waukesha, WI 53187 Phone 262-547-3500 1-800-347-3501 Fax 262-547-3927 Email [email protected] www.schaeferbrush.com

3” 3” 4” 4” 4” 4” 4” 4” 4” 4” 4” 4” 4”

Page 47

Spin - Clean Brushes Single stem construction with silicon carbide impregnated nylon. Step trim brush allows better cleaning of enhanced condenser tubes. The long bristles are designed oversized with the intention of bending over, allowing the aggressive filament to come into maximum contact with the lands. The short bristles are able to get into the grooves. These brushes provide better cleaning and longer life than conventional brushes. 1/4”-28 thread (use accessory 13010).

Single Spiral/Single Stem

Part #

Tube Size

Small Dia. of Brush

Large Dia. of Brush

Pack

Pack Weight

93490 93491 93492

5/8” 1/2” 3/4”

5/8” 1/2” 3/4”

1” 3/4” 1-1/8”

1 1 1

.02 .06 .06

Spin - Grit Brushes Single stem construction with silicon carbide impregnated nylon recommended for brass tubes. This brush is made oversized so the filament will lay over, resulting in increased contact with surface, providing better cleaning and longer life than conventional condenser cleaning brushes. Part #43482 use accessories 13042 or 13044. Part #43484-43488 use accessories 13002 or 13003. Part #93482 use accessory 13042. Part #93484-93488 use accessory 13010. Female Female Brush Tube Pack Single Spiral/Single Stem Part # Thread Dia. Size Pack Weight 43482 43484 43486 43488

8-32 12-24 12-24 12-24

1/2” 3/4” 1” 1-1/4”

Male Part #

Male Thread

Brush Dia.

93482 93484 93486 93488

8-32 1/4”-28 1/4”-28 1/4”-28

1/2” 3/4” 1” 1-1/4”

1/4”-5/16” 3/8”-9/16” 5/8”-11/16” 3/4”-1”

1 1 1 1

.02 .06 .06 .07

Tube Size

Pack

Pack Weight

1/4”-5/16” 3/8”-9/16” 5/8”-11/16” 3/4”-1”

1 1 1 1

.02 .06 .06 .07

Miniature Brushes Miniature and Micro-Miniature Brushes - Single Spiral/Single Stem For ultra-fine cross hole deburring, cleaning, blending and polishing of small diameter holes. Made with stainless steel, brass, or nylon. Single-Spiral Miniature Brushes with stainless steel stem and loop for hand use. ST/ST Part #

Brass Part #

Nylon Part #

Brush Diameter

Brush Part

Overall Length

Fill Dia.

Pack

02102 02103 02104 02105 02106 02107 02108 02109

02202 02203 02204 02205 02206 02207 02208 02209

02302 02303 02304 02305 02306 02307 02308 02309

1/32” 1/16” 3/32” 1/8” 5/32” 3/16” 7/32” 1/4”

1/2” 1/2” 3/4” 3/4” 3/4” 3/4” 3/4” 3/4”

4” 4” 4” 4” 4” 4” 4” 4”

.003 .003 .003 .003 .003 .003 .003 .003

1 1 1 1 1 1 1 1

Page 48



1101 S. Prairie Ave. PO Box 148 Waukesha, WI 53187 Phone 262-547-3500 1-800-347-3501 Fax 262-547-3927 Email [email protected] www.schaeferbrush.com

Miniature Brushes (Continued) Miniature and Micro-Miniature Brushes (continued) Single Spiral Miniature Brushes with a stainless steel stem and cut off ends for power or hand use. ST/ST Brass Nylon Brush Brush Overall Fill Part # Part # Part # Diameter Part Length Dia. Pack 02121 02122 02123 02124 02125 02126 02127 02128 02129 02130 02131 02132 02133 02134 02135 02136

02221 02222 02223 02224 02225 02226 02227 02228 02229 02230 02231 02232 02233 02234 02235 02236

02321 02322 02323 02324 02325 02326 02327 02328 02329 02330 02331 02332 02333 02334 02335 02336

1/50” 1/32” 3/64” 1/16” 5/64” 3/32” 7/64” 1/8” 9/64” 5/32” 11/64” 3/16” 13/64” 7/32” 15/64” 1/4”

1/4” 1/2” 1/2” 1/2” 3/4” 3/4” 3/4” 1” 1” 1” 1” 1” 1” 1” 1” 1”

4” 4” 4” 4” 4” 4” 4” 4” 4” 4” 4” 4” 4” 4” 4” 4”

.003 .003 .003 .003 .003 .003 .003 .003 .003 .003 .003 .003 .003 .003 .003 .003

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

Power Tube Brushes Double Spiral/Double Stem Used for polishing, blending, burr removal, and cleaning. For use in power tools where heavy duty cleaning is required. Double spiral/Double stem with twisted stem for power operation. H/C Steel Part #

ST/ST Part #

Brass Part #

Nylon Part #

All ST/ST Part #

Brush Diameter

Brush Part

Overall Length

Fill Dia.

Pack

01142 01162 01143 01163 01144 01164 01145 01165 01146 01166 01155 01175 01147 01167 01156 01176 01148 01168 01157 01177 01149 01169 01158 01178 01150 01170

01102 01122 01103 01123 01104 01124 01105 01125 01106 01126 01115 01135 01107 01127 01116 01136 01108 01128 01117 01137 01109 01129 01118 01138 01110 01130

01702 01722 01703 01723 01704 01724 01705 01725 01706 01726 01715 01735 01707 01727 01716 01736 01708 01728 01717 01737 01709 01729 01718 01738 01710 01730

01742 01762 01743 01763 01744 01764 01745 01765 01746 01766 01755 01775 01747 01767 01756 01776 01748 01768 01757 01777 01749 01769 01758 01778 01750 01770

01062 01082 01063 01083 01064 01084 01065 01085 01066 01086 01075 01095 01067 01087 01076 01096 01068 01088 01077 01097 01069 01089 01078 01098 01070 01090

1/4” 1/4” 5/16” 5/16” 3/8” 3/8” 7/16” 7/16” 1/2” 1/2” 9/16” 9/16” 5/8” 5/8” 11/16” 11/16” 3/4” 3/4” 3/16” 3/16” 7/8” 7/8” 15/16” 15/16” 1” 1”

1-1/2” 1-1/2” 1-1/2” 1-1/2” 1-1/2” 1-1/2” 2” 2” 2” 2” 2” 2” 2” 2” 2” 2” 2-1/2” 2-1/2” 2-1/2” 2-1/2” 2-1/2” 2-1/2” 2-1/2” 2-1/2” 2-1/2” 2-1/2”

4” 4” 4” 4” 4” 4” 5” 5” 5” 5” 5” 5” 5” 5” 5” 5” 5-1/2” 5-1/2” 5-1/2” 5-1/2” 5-1/2” 5-1/2” 5-1/2” 5-1/2” 5-1/2” 5-1/2”

.003 .005 .003 .005 .003 .005 .004 .006 .004 .006 .005 .008 .005 .008 .005 .008 .006 .010 .006 .010 .006 .010 .006 .010 .006 .010

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1



1101 S. Prairie Ave. PO Box 148 Waukesha, WI 53187 Phone 262-547-3500 1-800-347-3501 Fax 262-547-3927 Email [email protected] www.schaeferbrush.com

WHEN USING BRUSHES WEAR GOGGLES OR FACE SHIELDS!

Page 49

Burr Brushes Heavy Duty Power Brushes - Single Spiral/Single Stem Used in drill presses and hand power tools for deburring, polishing, and cleaning inner bores of tubing, machined cylinders, flat stock, and smooth or threaded blind holes. Available in carbon steel, stainless steel, and brass. H/C Steel Part #

ST/ST Part #

Brass Part #

Brush Diameter

Brush Part

Overall Length

Fill Dia.

01502 01504 01507 01509 01512 01514 01520 01522

01402 01404 01407 01409 01412 01414 01420 01422

01602 01604 01607 01609 01612 01614 01620 01622

1/4” 1/4” 5/16” 5/16” 3/8” 3/8” 7/16” 7/16”

1” 1” 1” 1” 1” 1” 1” 1”

3-1/2” 3-1/2” 3-1/2” 3-1/2”

.003 .005 .003 .005 .003 .005 .005

01526 01528 01533 01534 01539 01540 01545 01546 01551 01552 01557 01558 01563 01564 01569 01570 01575 01576 01585 01586 01595 01596

01426 01428 01433 01434 01439 01440 01445 01446 01451 01452 01457 01458 01463 01464 01469 01470 01475 01476 01485 01486 01495 01496

01626 01628 01633 01634 01639 01640 01645 01646 01651 01652 01657 01658 01663 01664 01669 01670 01675 01676 01685 01686 01695 01696

1/2” 1/2” 9/16” 9/16” 5/8” 5/8” 11/16” 11/16” 3/4” 3/4” 13/16” 13/16” 7/8” 7/8” 15/16” 15/16” 1” 1” 1-1/8” 1-1/8” 1-1/4” 1-1/4”

1” 1” 1” 1” 1” 1” 1” 1” 1” 1” 1” 1” 1” 1” 1” 1” 1” 1” 1” 1” 1” 1”

3-1/2” 3-1/2” 3-1/2” 3-1/2”

3-1/2” 3-1/2” 3-1/2” 3-1/2”

3-1/2” 3-1/2” 3-1/2” 3-1/2” 3-1/2” 3-1/2” 3-1/2” 3-1/2” 3-1/2” 3-1/2” 3-1/2” 3-1/2” 3-1/2” 3-1/2” 3-1/2” 3-1/2” 3-1/2” 3-1/2”

.008 .005 .008 .006 .008 .006 .008 .006 .008 .006 .008 .006 .008 .006 .008 .006 .008 .006 .008 .008 .010 .008 .010

Pack 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

WHEN USING BRUSHES WEAR GOGGLES OR FACE SHIELDS!

Page 50



1101 S. Prairie Ave. PO Box 148 Waukesha, WI 53187 Phone 262-547-3500 1-800-347-3501 Fax 262-547-3927 Email [email protected] www.schaeferbrush.com

Side Tuft Cleaning Brushes Single Spiral/Single Stem Used for cleaning and polishing threads, inner walls of tubes and cylinders. Solid concentration of bristles provide a high degree of bristle stiffness with little flexing of bristles during operation. For use in power tools. Available in high carbon steel, stainless steel and brass. H/C Steel Part #

ST/ST Part #

Brass Part #

Brush Diameter

Brush Part

Overall Length

Fill Dia.

Pack

01234 01235 01236 01237

01211 01202 01201 01203

01267 01268 01269 01270

1/4” 1/4” 9/32” 9/32”

9/16” 9/16” 9/16”

.003 .005 .003 .005

1 1 1 1

01238

01206

01271

5/16”

9/16” 9/16”

2-1/8” 2-1/8” 2-1/8” 2-1/8” 2-1/8”

.003

1

01239 01240 01241 01242 01243

01207 01208 01213 01209 01210

01272 01273 01274 01275 01276

5/16” 11/32” 3/8” 3/8” 3/8”

9/16” 9/16” 9/16” 9/16” 9/16”

2-1/8” 2-1/8” 2-1/8” 2-1/8”

.005 .003

2-1/8”

.003 .005 .008

1 1 1 1 1

01244

01212

01277

13/32”

9/16”

2-1/8”

.005

1

01245 01246 01247 01248 01249

01214 01215 01219 01216 01204

01278 01279 01280 01281 01282

7/16” 7/16” 1/2” 1/2” 1/2”

9/16” 9/16” 9/16” 9/16” 9/16”

2-1/8” 2-1/8” 2-1/8” 2-1/8”

.003 .005 .003 .005 .008

1 1 1 1 1

01250 01251 01252 01253 01254 01255 01256 01257 01258 01259 01260 01261 01262 01263 01264 01265 01266

01221 01217 01223 01218 01205 01225 01220 01227 01228 01229 01222 01230 01224 01231 01232 01233 01226

01283 01284 01285 01286 01287 01288 01289 01290 01291 01292 01293 01294 01295 01296 01297 01298 01200

9/16” 9/16” 5/8” 5/8” 5/8” 3/4” 3/4” 3/4” 7/8” 7/8” 7/8” 1” 1” 1-1/8” 1-1/8” 1-1/4” 1-1/4”

5/8” 5/8” 5/8” 5/8” 5/8” 5/8” 5/8” 5/8” 5/8” 5/8” 5/8” 5/8” 5/8” 5/8” 5/8” 5/8” 5/8”

2-1/4” 2-1/4” 2-1/4” 2-1/4”

.003 .005 .003 .005 .008 .003 .005 .008 .003 .005 .008 .005 .008 .005 .008 .005 .008

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

2-1/8”

2-1/4” 2-1/4” 2-1/4” 2-1/4” 2-1/4” 2-1/4” 2-1/4” 2-1/4” 2-1/4” 2-1/4” 2-1/4” 2-1/4” 2-1/4”

WHEN USING BRUSHES WEAR GOGGLES OR FACE SHIELDS!



1101 S. Prairie Ave. PO Box 148 Waukesha, WI 53187 Phone 262-547-3500 1-800-347-3501 Fax 262-547-3927 Email [email protected] www.schaeferbrush.com

Page 51

Abrasive Nylon Brushes Silicon Carbide - Single Spiral/Double Stem Used for wet or dry cleaning, polishing, blending, deburring inner walls of tubes, cross hole deburring and thread cleaning. Double stem construction used for added strength for power use or manual cleaning. Available in silicon carbide and aluminum oxide.

Aluminum Oxide - Single Spiral/Double Stem

Part #

Brush Dia.

Brush Part

Overall Length

Nylon/ Grit

Pack

Part #

Brush Dia.

Brush Part

Overall Length

Nylon/ Grit

Pack

01850

1/4”

1”

4”

.022/320

1

01950

1/4”

1”

4”

.012/600

1

01851

1/4”

1”

4”

.035/180

1

01954

3/8”

1”

4”

.012/600

1

01852

5/16”

1”

4”

.022/320

1

01957

1/2”

2”

5”

.012/600

1

01853

5/16”

1”

4”

.035/180

1

01960

5/8”

2”

5”

.012/600

1

01854

3/8”

1-1/2”

4”

.022/320

1

01963

11/16

2”

5”

.012/600

1

01855

3/8”

1-1/2”

4”

.035/180

1

01966

3/4”

2-1/2”

5-1/2”

.012/600

1

01856

3/8”

1-1/2”

4”

.040/120

1

01969

7/8”

2-1/2”

5-1/2”

.012/600

1

01857

1/2”

2”

5”

.022/320

1

01972

1”

2-1/2”

5-1/2”

.012/600

1

01858

1/2”

2”

5”

.035/180

1

01975

1-1/8”

2-1/2”

5-1/2”

.012/600

1

01859

1/2”

2”

5”

.040/120

1

01978

1-1/4”

2-1/2”

5-1/2”

.012/600

1

01860

5/8”

2”

5”

.022/320

1

01981

1-1/2”

2-1/2”

5-1/2”

.012/600

1

01861

5/8”

2”

5”

.035/180

1

01984

1-3/4”

2-1/2”

5-1/2”

.012/600

1

01862

5/8”

2”

5”

.040/120

1

01988

2”

2-1/2”

5-1/2”

.012/600

1

01863

11/16”

2”

5”

.022/320

1

01864

11/16”

2”

5”

.035/180

1

01865

11/16”

2”

5”

.040/120

1

01866

3/4”

2-1/2”

5-1/2”

.022/320

1

01867

3/4”

2-1/2”

5-1/2”

.035/180

1

01868

3/4”

2-1/2”

5-1/2”

.040/120

1

01869

7/8”

2-1/2”

5-1/2”

.022/320

1

01870

7/8”

2-1/2”

5-1/2”

.035/180

1

01871

7/8”

2-1/2”

5-1/2”

.040/120

1

01872

1”

2-1/2”

5-1/2”

.022/320

1

01873

1”

2-1/2”

5-1/2”

.035/180

1

01874

1”

2-1/2”

5-1/2”

.040/120

1

01875

1-1/8”

2-1/2”

5-1/2”

.022/320

1

01876

1-1/8”

2-1/2”

5-1/2”

.035/180

1

01877

1-1/8”

2-1/2”

5-1/2”

.040/120

1

01878

1-1/4”

2-1/2”

5-1/2”

.022/320

1

01879

1-1/4”

2-1/2”

5-1/2”

.035/180

1

01880

1-1/4”

2-1/2”

5-1/2”

.040/120

1

01881

1-1/2”

2-1/2”

5-1/2”

.022/320

1

01882

1-1/2”

2-1/2”

5-1/2”

.035/180

1

01883

1-1/2”

2-1/2”

5-1/2”

.040/120

1

01884

1-3/4”

2-1/2”

5-1/2”

.022/320

1

01885

1-3/4”

2-1/2”

5-1/2”

.035/180

1

01886

1-3/4”

2-1/2”

5-1/2”

.040/120

1

01887

1-3/4”

2-1/2”

5-1/2”

.040/180

1

01888

2”

2-1/2”

5-1/2”

.022/320

1

01889

2”

2-1/2”

5-1/2”

.035/180

1

01890

2”

2-1/2”

5-1/2”

.040/120

1

01891

2”

2-1/2”

5-1/2”

.040/180

1

Page 52



WHEN USING BRUSHES WEAR GOGGLES OR FACE SHIELDS!

1101 S. Prairie Ave. PO Box 148 Waukesha, WI 53187 Phone 262-547-3500 1-800-347-3501 Fax 262-547-3927 Email [email protected] www.schaeferbrush.com

Abrasive Nylon Brushes Silicon Carbide - Single Spiral/Single Stem Used for wet or dry cleaning, polishing, blending, deburring inner walls of tubes, cross hole deburring and thread cleaning. Single-spiral construction made with a continuous end. Available in silicon carbide and aluminum oxide. Brush Brush Overall Nylon/ Part # Dia. Part Length Grit Pack

Aluminum Oxide - Single Spiral/Single Stem Part #

Brush Dia.

Brush Part

Overall Length

Nylon/ Grit

Pack

1” 1” 1”

4” 5” 5” 5”

.012/600 .012/600 .012/600 .012/600

1 1 1 1

5”

.012/600

1

.012/600 .012/600

1 1 1 1 1

4” 4” 5” 5”

.018/500 .022/320 .018/500 .022/320

1 1 1 1

01902 01905 01908 01911

5/32” 3/16” 7/32” 1/4”

5”

.018/500

1

01914

5/16”

1” 1”

1” 1” 1” 1” 1”

5” 5” 5” 5”

.022/320 .018/500

01917 01921 01925 01930 01934

3/8” 7/16” 1/2” 5/8” 3/4”

1” 1” 1” 1” 1”

5” 5” 5” 5”

5”

.022/320 .018/500 .022/320

1 1 1 1 1

5”

.012/600 .012/600 .012/600

3/8”

1”

5”

.022/320

1

01938

7/8”

1”

5”

.012/600

1

3/8” 3/8” 7/16” 7/16” 7/16”

1” 1” 1” 1” 1”

5” 5” 5” 5”

.040/120 .040/180 .022/320 .040/120 .040/180

1 1 1 1 1

01942 01946

1” 1-1/4”

1” 1”

5” 5”

.012/600 .012/600

1 1

1/2” 1/2” 1/2” 5/8” 5/8” 5/8” 3/4” 3/4” 3/4” 7/8” 7/8” 7/8” 1” 1” 1” 1-1/4” 1-1/4” 1-1/4”

1” 1” 1” 1” 1” 1” 1” 1” 1” 1” 1” 1” 1” 1” 1” 1” 1” 1”

5” 5” 5” 5”

.022/320 .040/120 .040/180 .022/320 .040/120 .040/180 .022/320 .040/120 .040/180 .022/320 .040/120 .040/180 .022/320 .040/120 .040/180 .022/320 .040/120 .040/180

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

01802 01803 01805 01806

5/32” 5/32” 3/16” 3/16”

1” 1” 1”

01808

7/32”

1” 1”

01809 01811 01812 01814 01815

7/32” 1/4” 1/4” 5/16” 5/16”

01817 01818 01819 01821 01822 01823 01825 01826 01827 01830 01831 01832 01834 01835 01836 01838 01839 01840 01842 01843 01844 01846 01847 01848

5”

5” 5” 5” 5” 5” 5” 5” 5” 5” 5” 5” 5” 5” 5”

WHEN USING BRUSHES WEAR GOGGLES OR FACE SHIELDS!



1101 S. Prairie Ave. PO Box 148 Waukesha, WI 53187 Phone 262-547-3500 1-800-347-3501 Fax 262-547-3927 Email [email protected] www.schaeferbrush.com

Page 53

Schaefer Brush Twisted In Wire Brush Design Form

Section 10-1

Name: ____________________________________________ Company: ___________________________________________________________ Address: __________________________________________________ City: ___________________ State: _______ Zip: ____________________ Phone: ____________________________ Fax: _________________________ Email: _______________________________________________ Date: __________________________________ K J

B

H

G D M

A

E C

Brush Application: _______________________________________________________________________________________________________ A. Brush Dia.: ____________________________________________

J. Tip Style:

B. Length of Brush Part: ____________________________________ C. Overall Length: ________________________________________

Twisted End

Vinyl Tip

D. End Type: _____________________________________________ Pipe Nipple

Plastic Handle

Wood Handle

Straight Stem

Blunt End

Turned Tuft

Loop End: __________________________ Tied Tuft

E. Stem Dia.: ______________________________________________

Other: _________________

F. Stem Material: __________________________________________

K. Tip Length: ____________________________________________

G. Brush Filament Dia.: _____________________________________

L. Twisted Wire:

H. Brush Filament Type: Nylon

Brass

Polypropylene

Phosphorous Bronze

Single Spiral

Single Spiral

Double Spiral

Polyester

Stainless Steel

Single Stem

Double Stem

Double Stem

Tampico

Carbon Steel

Horse Hair

Other: _________________

I. Fill Amount: Light

Fill out and Fax to Schaefer Brush 262-547-3927

Meduim Heavy

Page 54

M. Stem Length: _________________________________________



1101 S. Prairie Ave. PO Box 148 Waukesha, WI 53187 Phone 262-547-3500 1-800-347-3501 Fax 262-547-3927 Email [email protected] www.schaeferbrush.com

Recommend Documents
Phone 262-547-3500 1-800-347-3501 Fax 262-547-3927. Email [email protected] www.schaeferbrush.com. MANUFACTURING. Schaefer Brush.

Clean Battery Case, Original Box. 4 x 11 inches. .... Includes Extra Bandits and ..... ERTL Smokey and the Bandit II Die-Cast Smokey Semi Truck and Trailer.

Furnace, Refrigerator & Radiator Brushes. Section 3. Twisted Wire Brushes. The small symbols represent a cross section of a twisted brush. Single Spiral/Single ...

mode noise back to the drive. ... drive over current trip problems due to cable ..... Top Drive. Service. Loops. Low smoke halogen-free fire resistant or flame.

Acquisition, Process Control, Telecommunications and General Purpose requirements. ... Environmental Ratings: Storage Temp: ... 2.0. 2.0. 0.5. Contact Rating.

Nexans AmerCable's CIR is a next-generation cable designed to replace older-technology cables like Type ..... Symmetrical insulated ground conductors reduce.

DEREK JETER NEW YORK YANKEES AUTOGRAPHED CHIT-MATTE BOARD ..... On-air, print & digital advertising & promotional exposure through our.

Stainless Steel Screws) Used for 15 and 20 gal (57/79 liter) tanks only. Stainless Steel Screws) ...... 804006 - Round Dusting Brush 3" (8 cm). 829562 - Crevice ...

Nexans AmerCable's CIR is a next-generation cable designed to replace older-technology ..... Symmetrical insulated ground conductors reduce induced voltage ...