Reset Form
HID Well Light 6350 Copper and Bronze, PAR38 / R40 Metal Halide revision 8/17/11 • 6350.pdf
Approvals:
6350 Fixture
/
UE D
Type: Job: Fixture Catalog number: /
Lamp Mode
Date: Page: 1 of 2
Assembled with Fixture Option - ordered separately See Page 2
Specifications
Lamp Mode1
Pulse Start Metal Halide 70PMH120 70PMH208 70PMH240 70PMH277 70PMH347
100PMH120 100PMH208 100PMH240 100PMH277 100PMH347
TIN
Housing: Spun copper, bronze clamping ring, prewired cord through brass seal. Lens: Convex tempered clear glass with silicone gasket. Socket: Porcelain medium base. Well: 9" diameter x 14L" depth direct burial PVC pipe. Louver: Cast aluminum finished black with polished edges, secured to well with socket head set screws. Slot sizes allow light and drainage, and prohibit litter from collecting in the well, however, not recommended for pedestrian or walkover traffic. Ballast: High power factor -20°F. starting, mounted on tray, 120 volt standard; 277 volt and 347 volt on request. Ballast Box: High temperature, compression molded featuring long-fiber fiberglass impregnated heavy wall construction. Wall separates ballast chamber from splice compartments, splice area 32 cu in.; prewired, two anti-siphon plugs to and from ballast chamber. Conduit entry; two L" NPT for through wiring, one K" NPT for remote access. Ballast Cover: Cast bronze. Flat for remote mount.
ORDERING INFORMATION Fixture 6350
CO N
Lamp PAR38 / R40 Socket Medium Base ANSI Ballast M-98 Type
UL cUL 15981 IP67 Rated
Listings and Ratings –
25C Ambient ISO 9001:2000
CE
PAR38 / R40 Medium Base M-90
NOTE: Fixture will tilt 15° within well. If greater tilt is needed, entire well can be installed at an angle. CAUTION: Not approved for walk-over areas. Conduit entries must be RTV sealed. Do not submerge. Provide drainage during installation (by others) to prevent flooding.
Suitable for wet locations
1
20"
1
70 PMH 120
(508.0 mm)
9K"
7C"
(187.3 mm)
DIS
(241.3 mm)
High Ground Cover
(2) L" (1) K" NPT
Line Volts Lamp Type: PMH = Pulse Start Metal Halide Lamp Watts
Rock, Bark, Low Ground Cover, etc.
14E"
(377.8 mm)
Drainage (by others)
17" MIN. (431.8 mm)
Hubbell Lighting, Inc. KIM LIGHTING RESERVES THE RIGHT TO CHANGE SPECIFICATIONS WITHOUT NOTICE.
© 2011 KIM LIGHTING INC. • P.O. BOX 60080, CITY OF INDUSTRY, CA 91716-0080 • TEL: 626/968-5666 • FAX: 626/369-2695
HID Well Light 6350 Copper and Bronze, PAR38 / R40 Metal Halide revision 8/17/11 • 6350.pdf
Type: Job:
UE D
Page: 2 of 2
Fixture Options
Directional Louver Cat. No. 5090DL 5090DLAssembled with fixture No Option
9K" square. Cast aluminum. Replaces standard full louver. Provides glare control and allows maximum light output in direction of fixture tilt. Slot sizes vary to allow light and drainage, and prohibit litter from collecting in the well, however, not recommended for pedestrian or walkover traffic.
Round Tree Grate Louver Cat. No. 5293TG 5293TGAssembled with fixture No Option
Gray cast iron. Designed to mount into the Neenah Foundry R-8860 93" round tree grate with 9K" diameter light opening. Slotted design allows light and drainage, and prohibits litter from collecting in the well, however, not recommended for pedestrian or walkover traffic. For use with tree grate only.
9K"
(241.3 mm)
TIN
May be ordered separately. To order assembled with fixture, add to fixture Cat. No. - Example: 6350/70MH120/5090DL
DIS
CO N
May be ordered separately. To order assembled with fixture, add to fixture Cat. No. - Example: 6350/70MH120/5293TG
© 2011 KIM LIGHTING INC. • P.O. BOX 60080, CITY OF INDUSTRY, CA 91716-0080 • TEL: 626/968-5666 • FAX: 626/369-2695
9K" DIA. (241.3 mm)