installation of sti mini stopper® series
Safety Technology International, Inc.
Safety Technology International (Europe) Ltd.
2306 Airport Road • Waterford, Michigan 48327-1209 Phone: 248-673-9898 • Fax: 248-673-1246 Toll Free: 800-888-4784 • E-mail: [email protected] Web: www.sti-usa.com STI-6004 GASKET (INNER DIA. USED ON 1/2 in.) (OUTER DIA. USED ON 3/4 in.) NOTE: USE WITH STI-6535
CENTER COVER AND FRAME ASSY. AROUND PULL STATION. MARK AND DRILL (4) HOLES .25 in. (6.3mm) DIA.
SPACER INSERT (2) PROVIDED ALLOWS FOR INSTALLATION WITH OR WITHOUT ELECTRICAL CONDUIT. NOTE: NOT TO BE USED WITH STI-6535.
M
E FIR LL PU
ALAR
Unit 49G Pipers Road • Park Farm Industrial Estate • Redditch Worcestershire • B98 0HU • England • Tel: 44 (0) 1527 520 999 Fax: 44 (0) 1527 501 999 • Freephone: 0800 085 1678 (UK only) E-mail: [email protected] • Web: www.sti-europe.com
A
HORN HOUSING
5.5 in.(139mm)
ALL HORN MODELS SIDE VIEW
5.5 in.(139mm) EA135 HORN DEACTIVATION PIN NOTE: FOR NORMAL OPERATION, TO ARM HORN, REMOVE PIN. ALARM WILL SOUND, SHUT COVER.
SPACER
ALL MODELS WITHOUT HORN SIDE VIEW FRAME 4.12 in. (104mm)
STI-6531 SPACER (CLEAR) STI-6531-R (RED) STI-6531-Y (YELLOW) STI-6531-B (BLUE) STI-6531-G (GREEN)
MODELS WITH NO SPACER (4) 19013 #10 x 1.5 in. PHILIPS PAN HEAD MODELS WITH SPACER (4) 19026 #10 x 3.5 in. PHILIPS PAN HEAD
3.25 in. (83mm)
M
ALAR
F
SPACER
ALL MODELS END VIEW PRODUCT DIMENSIONS
TYPICAL SURFACE MOUNT INSTALLATION
6.23 in. (158mm)
2 in.(51mm)
SPACER
03006 FRAME GASKET INSTALL WITH ADHESIVE BACKING FACING TOP OF FRAME
IRE
2.25 in. (57mm)
FRAME
WN DO
EXISTING PULL STATION
OPTIONAL
5 in.(127mm)
FRAME
6 in.(152mm)
19033 ANCHOR (4) PROVIDED OPTIONAL: RECOMMEND THE USE OF STI-6581 BACKPLATE TO INSURE PROPER SEALING
4.75 in.(121mm)
STI-6600 HORN MODEL WITHOUT SPACER STI-6605 HORN MODEL WITH SPACER STI-6525 WEATHER MODEL WITHOUT HORN OR SPACER, WITH GASKET STI-6535 WEATHER MODEL WITHOUT HORN, WITH SPACER AND GASKETS STI-6540 WITHOUT HORN WITHOUT SPACER STI-6545 WITHOUT HORN, WITH SPACER STI-6500 CLEAR COVER, NO HORN HOUSING STI-6505 CLEAR COVER, NO HORN HOUSING, WITH SPACER
STI-6501 GASKET. STI-6525 (1) PROVIDED STI-6535 (2) PROVIDED INSTALL WITH ADHESIVE BACKING FACING WALL
19031 FRAME LOCK
N OW
D ULL
P
LIF
TO INSTALL, DRILL 23/64” HOLE IN COVER ONLY. INSTALL BLOCK FROM BACK SIDE OF FRAME.
TO ACCESS BATTERY REMOVE (2) SCREWS AND LIFT HOUSING LID USING TAB
VOLUME SELECTOR SWITCH
SUB-65 BREAKABLE SEAL (5) PROVIDED
TH
LID NOTCH TAB HOUSING TAB
ERE
B
ENT
ER
DETAIL B
REPLACING HOUSING LID • PLACE NOTCH OF LID UNDER HOUSING TAB • ROTATE LID INTO POSITION • REPLACE SCREWS ALIGN BATTERY TERMINALS, PUSH IN TERMINALS AND ROTATE INTO POSITION. BE SURE BATTERY TERMINALS ARE FULLY ENGAGED.
BATTERY - 9 VOLT PROVIDED
VIEW IN DIRECTION OF ARROW A OPTIONAL: STOPPER SEAL STI-6515
EA135 HORN SERVICE PIN
TYPICAL FLUSH MOUNT INSTALLATION
VIEW SHOWING BATTERY REPLACEMENT
REMOVE ADHESIVE BACKING PAPER GASKET NOT FOR USE WITH UNITS CONTAINING HORN
RETIRER LE PAPIER DORSAL DE L’ADHÉSIF NE PAS UTILISER LE JOINT AVEC LES UNITÉS INTÉGRANT UNE ALARME SONORE
Electronic warranty form at www.sti-usa.com/wc14
INSTALLATION OF STI MINI STOPPER® SERIES
All specifications and information shown were current as of publication and are subject to change without notice. 6600IS FEB2009
Safety Technology International (Europe) Ltd.
2306 Airport Road • Waterford, Michigan 48327-1209 Phone: 248-673-9898 • Fax: 248-673-1246 Toll Free: 800-888-4784 • E-mail: [email protected] Web: www.sti-usa.com STI-6004 GASKET (INNER DIA. USED ON 1/2 in.) (OUTER DIA. USED ON 3/4 in.) NOTE: USE WITH STI-6535
CENTER COVER AND FRAME ASSY. AROUND PULL STATION. MARK AND DRILL (4) HOLES .25 in. (6.3mm) DIA.
SPACER INSERT (2) PROVIDED ALLOWS FOR INSTALLATION WITH OR WITHOUT ELECTRICAL CONDUIT. NOTE: NOT TO BE USED WITH STI-6535.
M
E FIR LL PU
ALAR
Unit 49G Pipers Road • Park Farm Industrial Estate • Redditch Worcestershire • B98 0HU • England • Tel: 44 (0) 1527 520 999 Fax: 44 (0) 1527 501 999 • Freephone: 0800 085 1678 (UK only) E-mail: [email protected] • Web: www.sti-europe.com
A
HORN HOUSING
5.5 in.(139mm)
ALL HORN MODELS SIDE VIEW
5.5 in.(139mm) EA135 HORN DEACTIVATION PIN NOTE: FOR NORMAL OPERATION, TO ARM HORN, REMOVE PIN. ALARM WILL SOUND, SHUT COVER.
SPACER
ALL MODELS WITHOUT HORN SIDE VIEW FRAME 4.12 in. (104mm)
STI-6531 SPACER (CLEAR) STI-6531-R (RED) STI-6531-Y (YELLOW) STI-6531-B (BLUE) STI-6531-G (GREEN)
MODELS WITH NO SPACER (4) 19013 #10 x 1.5 in. PHILIPS PAN HEAD MODELS WITH SPACER (4) 19026 #10 x 3.5 in. PHILIPS PAN HEAD
3.25 in. (83mm)
M
ALAR
F
SPACER
ALL MODELS END VIEW PRODUCT DIMENSIONS
TYPICAL SURFACE MOUNT INSTALLATION
6.23 in. (158mm)
2 in.(51mm)
SPACER
03006 FRAME GASKET INSTALL WITH ADHESIVE BACKING FACING TOP OF FRAME
IRE
2.25 in. (57mm)
FRAME
WN DO
EXISTING PULL STATION
OPTIONAL
5 in.(127mm)
FRAME
6 in.(152mm)
19033 ANCHOR (4) PROVIDED OPTIONAL: RECOMMEND THE USE OF STI-6581 BACKPLATE TO INSURE PROPER SEALING
4.75 in.(121mm)
STI-6600 HORN MODEL WITHOUT SPACER STI-6605 HORN MODEL WITH SPACER STI-6525 WEATHER MODEL WITHOUT HORN OR SPACER, WITH GASKET STI-6535 WEATHER MODEL WITHOUT HORN, WITH SPACER AND GASKETS STI-6540 WITHOUT HORN WITHOUT SPACER STI-6545 WITHOUT HORN, WITH SPACER STI-6500 CLEAR COVER, NO HORN HOUSING STI-6505 CLEAR COVER, NO HORN HOUSING, WITH SPACER
STI-6501 GASKET. STI-6525 (1) PROVIDED STI-6535 (2) PROVIDED INSTALL WITH ADHESIVE BACKING FACING WALL
19031 FRAME LOCK
N OW
D ULL
P
LIF
TO INSTALL, DRILL 23/64” HOLE IN COVER ONLY. INSTALL BLOCK FROM BACK SIDE OF FRAME.
TO ACCESS BATTERY REMOVE (2) SCREWS AND LIFT HOUSING LID USING TAB
VOLUME SELECTOR SWITCH
SUB-65 BREAKABLE SEAL (5) PROVIDED
TH
LID NOTCH TAB HOUSING TAB
ERE
B
ENT
ER
DETAIL B
REPLACING HOUSING LID • PLACE NOTCH OF LID UNDER HOUSING TAB • ROTATE LID INTO POSITION • REPLACE SCREWS ALIGN BATTERY TERMINALS, PUSH IN TERMINALS AND ROTATE INTO POSITION. BE SURE BATTERY TERMINALS ARE FULLY ENGAGED.
BATTERY - 9 VOLT PROVIDED
VIEW IN DIRECTION OF ARROW A OPTIONAL: STOPPER SEAL STI-6515
EA135 HORN SERVICE PIN
TYPICAL FLUSH MOUNT INSTALLATION
VIEW SHOWING BATTERY REPLACEMENT
REMOVE ADHESIVE BACKING PAPER GASKET NOT FOR USE WITH UNITS CONTAINING HORN
RETIRER LE PAPIER DORSAL DE L’ADHÉSIF NE PAS UTILISER LE JOINT AVEC LES UNITÉS INTÉGRANT UNE ALARME SONORE
Electronic warranty form at www.sti-usa.com/wc14
INSTALLATION OF STI MINI STOPPER® SERIES
All specifications and information shown were current as of publication and are subject to change without notice. 6600IS FEB2009
