IP port configuration Step1
CP500 CONTROL PANELS TCP/IP port configuration Step1
Type des. Prep
06/2005
FRENT VALOR
Appr. /
Doc. Kind
Function Description
No. Of P
Title
TCP/IP Port configuration Step1
6
Resp. dept. Doc no.
ABB
ABB Entrelec
1SBC159100M0202_Ch1
Lang.
En
Rev. Ind.
1
TCP/IP Port configuration Step1
Summary 1. 2. 3.
Configuration of TCP/IP card................................................................................................................3 Configuration of address TCP/IP...........................................................................................................4 Send Program.........................................................................................................................................5
Doc. no
ABB
ABB Entrelec
1SBC159100M0202_Ch1
Lang.
En
Rev. Ind.
Page
2
TCP/IP Port configuration Step1
1.
Configuration of TCP/IP card
Select Setup, Peripherals.
Select Slot 1 or Slot 2, according to the position of the card.
Right-click to edit the properties:
•
Select IFC ETTP Doc. no
ABB
ABB Entrelec
1SBC159100M0202_Ch1
Lang.
En
Rev. Ind.
Page
3
TCP/IP Port configuration Step1
2.
Configuration of address TCP/IP
Select TCP/IP Connection1
Right-click to edit the Connections & Properties: •
Choose Connection and IFC ETTP
•
Choose Properties •
Give a Connection name.
• Give an IP Address and Subnet mask corresponding to your network.
Doc. no
ABB
ABB Entrelec
1SBC159100M0202_Ch1
Lang.
En
Rev. Ind.
Page
4
TCP/IP Port configuration Step1
3.
Send Program At first time, you must use serial transfer (CAB5) in order to send the program.
Before to send a program you must modify the communication parameters. Select Transfer, Project… or directly icon
Select Setting.
•
.
Use TCP/IP transfer to transfer the program.
Doc. no
ABB
ABB Entrelec
1SBC159100M0202_Ch1
Lang.
En
Rev. Ind.
Page
5
TCP/IP Port configuration Step1
Select Send to send a program.
Verify the address TCP/IP (Host address) and OK.
Doc. no
ABB
ABB Entrelec
1SBC159100M0202_Ch1
Lang.
En
Rev. Ind.
Page
6
Type des. Prep
06/2005
FRENT VALOR
Appr. /
Doc. Kind
Function Description
No. Of P
Title
TCP/IP Port configuration Step1
6
Resp. dept. Doc no.
ABB
ABB Entrelec
1SBC159100M0202_Ch1
Lang.
En
Rev. Ind.
1
TCP/IP Port configuration Step1
Summary 1. 2. 3.
Configuration of TCP/IP card................................................................................................................3 Configuration of address TCP/IP...........................................................................................................4 Send Program.........................................................................................................................................5
Doc. no
ABB
ABB Entrelec
1SBC159100M0202_Ch1
Lang.
En
Rev. Ind.
Page
2
TCP/IP Port configuration Step1
1.
Configuration of TCP/IP card
Select Setup, Peripherals.
Select Slot 1 or Slot 2, according to the position of the card.
Right-click to edit the properties:
•
Select IFC ETTP Doc. no
ABB
ABB Entrelec
1SBC159100M0202_Ch1
Lang.
En
Rev. Ind.
Page
3
TCP/IP Port configuration Step1
2.
Configuration of address TCP/IP
Select TCP/IP Connection1
Right-click to edit the Connections & Properties: •
Choose Connection and IFC ETTP
•
Choose Properties •
Give a Connection name.
• Give an IP Address and Subnet mask corresponding to your network.
Doc. no
ABB
ABB Entrelec
1SBC159100M0202_Ch1
Lang.
En
Rev. Ind.
Page
4
TCP/IP Port configuration Step1
3.
Send Program At first time, you must use serial transfer (CAB5) in order to send the program.
Before to send a program you must modify the communication parameters. Select Transfer, Project… or directly icon
Select Setting.
•
.
Use TCP/IP transfer to transfer the program.
Doc. no
ABB
ABB Entrelec
1SBC159100M0202_Ch1
Lang.
En
Rev. Ind.
Page
5
TCP/IP Port configuration Step1
Select Send to send a program.
Verify the address TCP/IP (Host address) and OK.
Doc. no
ABB
ABB Entrelec
1SBC159100M0202_Ch1
Lang.
En
Rev. Ind.
Page
6
