Maestro Wireless® dimmers and switches
Designer wallplate opening
Maestro Wireless dimmers and switches ®
2.94 in (75 mm) Product family features Uses Lutron Clear Connect® Radio Frequency (RF) technology, which provides reliable RF communication with Pico® wireless controls (see pg. 151) and Radio Powr SavrTM wireless sensors (see pg. 143, 147)
•
Combine up to 10 wireless devices (dimmers, switches, sensors and/or wireless controls)
•
True multi-location dimming from every location
•
Tap on to favorite level; tap off; tap twice for full on
•
4.69 in (119 mm)
Touch rocker to adjust light level
•
Delayed off provides light as you exit the room
•
Line frequency compensation maintains stable light levels despite power line frequency and voltage variations
•
Communicates at 434 MHz frequency
•
Mechanical air-gap to disconnect load power
•
Coordinating Claro®, Satin Colors®, and Stainless Steel wallplates only available separately
•
• Custom engraving available for wallplates, see pg. 164 .30 in (7.6 mm) profile Control types
Single-pole (one location)
Multi-location dimming (up to 10 locations)
Wireless multi-location dimming (up to 10 locations)
Direct load type compatibility
Shown actual size: Maestro Wireless dimmer and 1-gang Claro wallplate in White (WH). Shown actual size: Pico wireless control in White (WH), W: 1.25 in (31.75 mm) x H: 2.63 in (66.68 mm) x D: .33 in (8 mm). For details, see pg. 151)
Incandescent/halogen lighting
Magnetic low-voltage lighting
Electronic low-voltage lighting
Fluorescent lighting
LED lighting
Lighting load interfaces are not compatible with this family.
Download specification submittal Download high resolution product image 73
Volume 1 P/N 367-1746 REV B
www.lutron.com/specificationguide | 1.800.523.9466 |
Designer wallplate opening
Maestro Wireless dimmers and switches ®
Available finishes Use BOLD color code in model number (Example: MRF2-600M-PD) Gloss finishes*
LA Light Almond
AL Almond
IV Ivory
GR Gray
BR Brown
BL Black
SW Snow
LS Limestone
BI Biscuit
ES Eggshell
PD Palladium
TP Taupe
ST Stone
BG Bluestone
PL Plum
SG Sea Glass
TQ Turquoise
GS Goldstone
DS Desert Stone
GB Greenbriar
MS Mocha Stone
TC Terracotta
SI Sienna
HT Hot
MR Merlot
MN Midnight
WH White Satin finishes*
SS Stainless Steel
*Coordinating wallplates only available separately. For wallplate information, see pg. 169. Stainless Steel wallplate includes black plastic trim/adapter, visible from side. Match with separate Black (BL) or Midnight (MN) controls. | 1.800.523.9466 | www.lutron.com/specificationguide
Volume 1 P/N 367-1746 REV B
74
Designer wallplate opening
Maestro Wireless dimmers and switches ®
Incandescent/halogen or Magnetic low-voltage dimmers
Wireless dimmers Provides true dimming from each location with companion dimmers or Pico® wireless controls (see pg. 151)
Digital fade dimmer†
Tap on to favorite level; tap off
Multi-location/single-pole*† MRF2-6ND-120-XX1 120 V 600 W/VA Multi-location/single-pole† MRF2-10D-120-XX1 120 V 1000 W/VA
•
Multi-location/single-pole MRF2-6MLV-XX1 120 V 600 W/VA Digital fade dimmers—specification grade
•
Tap twice for full on
•
Press, hold, and release for delayed fade-to-off
•
The stated W (Watt) rating is the maximum incandescent lamp load. Ratings for MLV loads represent the maximum of the total lamp wattage plus MLV transformer loss (typically 20%).
Touch rocker to adjust light level
•
Incandescent/halogen dimmers
Electronic low-voltage dimmers*
Digital fade dimmers† Multi-location/single-pole MRF2-600M-XX 120 V 600 W
Digital fade dimmers† 1
Multi-location/single-pole MRF2-600MTHW-XX2 Dimmer package 120 V 600 W MRF2-600MTHW- model includes Pico wireless control and 1-gang wallplate
XX1: Gloss and Satin Colors® codes, see pg. 74 XX2: Available in Gloss White (WH) and Light Almond (LA) (Wallplates not included. Order separately, see pg. 169)
75
Volume 1 P/N 367-1746 REV B
Multi-location/single-pole* MRF2-6ELV-120-XX1 120 V 600 W Only certain LED drivers are dimmable using an ELV dimmer; for more information visit www.lutron.com/LED.
All models must be derated if ganged unless otherwise noted, see pg. 179. *Requires neutral wire connection. †Minimum load required, see specification submittal.
www.lutron.com/specificationguide | 1.800.523.9466 |
Designer wallplate opening
Maestro Wireless dimmers and switches ®
Connections overview Load connections*
Incandescent/ Halogen
Table Lamp
Magnetic Low-Voltage
MLV Transformer (by others)
Incandescent/ Incandescent/ Incandescent Incandescent/ Halogen Halogen/ Lamp Halogen/ Dimmer MLV Dimmer Dimmer MLV Dimmer Control types (for 2 or more locations) Dim from multiple locations (up to 10)
Light Source
MultiLocation Dimmer
Electronic Fluorescent Low-Voltage Lighting
ELV Transformer (by others)
ELV Dimmer
LED
Lutron Dimming Ballasts
Switched Lighting/Fans
Lutron Hi-lume ® A-Series LED Driver
Fluorescent Dimmer (3-wire only)
Fluorescent Dimmer (3-wire only)
Switch
Dim from multiple locations (up to 10)
Up to 9 Pico® Wireless Controls
Light Source
MultiLocation Dimmer
Up to 9 Companion Dimmers and/or Pico Wireless Controls
Switch from multiple locations (up to 10)
Light Source
MultiLocation Switch
Up to 9 Companion Switches and/or Pico Wireless Controls
Download complete Connection Diagrams
79
Volume 1 P/N 367-1746 REV B
For more information on ballasts, visit www.lutron.com/ballasts. For more information on LED drivers, visit www.lutron.com/LED. *For illustration purposes only. Consult model number pages for specific voltage and capacity information.
www.lutron.com/specificationguide | 1.800.523.9466 |
Appendix | Mounting, ganging, and derating Mounting requirements and how to understand ganging and derating Individual devices Individual dimmers, switches, wall sensors, and accessories typically mount in standard 1-gang electrical boxes (fig. A). Standard ganging Ganging is the side-by-side mounting of two or more dimmers or accessory devices under a multi-gang wallplate. (fig. B-D)
A 1-gang box (W: 2 in x H: 3 in x D: 2.5 in)
B 2-gang box (W: 4 in x H: 3 in x D: 2.5 in)
Standard multi-gang installation: •
Uses standard multi-gang electrical backboxes
•
Uses standard multi-gang wallplates
Requires fins to be removed from dimmers for proper spacing (“Fins Broken” ganging)
C 3-gang box (W: 6 in x H: 3 in x D: 2.5 in)
•
May require derating (i.e., reduction of dimmer capacity due to fin removal); see derating tables, pg. 181
•
Custom Architectural ganging Architectural dimmers, switches and accessories may be ganged without derating (fig. E), via custom Architectural multi-gang: • May require customized, wider-thanstandard wallplates •
• •
D 4-gang box (W: 8 in x H: 3 in x D: 2.5 in)
E (2) 1-gang boxes with 3/4 in spacer
May require wider-than-standard electrical backboxes Allows full capacity (“No Fins Broken”) ganging Required for Nova® dimmers and for larger width (high capacity) architectural controls
Visit www.lutron.com/customganging for additional information
•
Light load power interfaces (pg. 185) Interfaces typically mount to a standard electrical junction box (fig. F); must be mounted within 7 degrees of vertical. Maximum output: 5.1 in x 6.3 in. Interfaces project 1.2 in in front of box. Ceiling/wall mount sensors (pgs. 43 and 147) Wireless ceiling mount Radio Powr SavrTM sensors (fig. G) mount to brackets provided with sensor using adhesive strips or mounting hardware provided.
179
Volume 1 P/N 367-1746 REV B
F Junction box (W: 4 in x H: 4 in x D: 2.5 in)
G Wireless sensor mounting bracket (3.2 in diameter footprint, mounting brackets are spaced 1.8 in)
www.lutron.com/specificationguide | 1.800.523.9466 |
Maestro Wireless dimmers and switches ®
2.94 in (75 mm) Product family features Uses Lutron Clear Connect® Radio Frequency (RF) technology, which provides reliable RF communication with Pico® wireless controls (see pg. 151) and Radio Powr SavrTM wireless sensors (see pg. 143, 147)
•
Combine up to 10 wireless devices (dimmers, switches, sensors and/or wireless controls)
•
True multi-location dimming from every location
•
Tap on to favorite level; tap off; tap twice for full on
•
4.69 in (119 mm)
Touch rocker to adjust light level
•
Delayed off provides light as you exit the room
•
Line frequency compensation maintains stable light levels despite power line frequency and voltage variations
•
Communicates at 434 MHz frequency
•
Mechanical air-gap to disconnect load power
•
Coordinating Claro®, Satin Colors®, and Stainless Steel wallplates only available separately
•
• Custom engraving available for wallplates, see pg. 164 .30 in (7.6 mm) profile Control types
Single-pole (one location)
Multi-location dimming (up to 10 locations)
Wireless multi-location dimming (up to 10 locations)
Direct load type compatibility
Shown actual size: Maestro Wireless dimmer and 1-gang Claro wallplate in White (WH). Shown actual size: Pico wireless control in White (WH), W: 1.25 in (31.75 mm) x H: 2.63 in (66.68 mm) x D: .33 in (8 mm). For details, see pg. 151)
Incandescent/halogen lighting
Magnetic low-voltage lighting
Electronic low-voltage lighting
Fluorescent lighting
LED lighting
Lighting load interfaces are not compatible with this family.
Download specification submittal Download high resolution product image 73
Volume 1 P/N 367-1746 REV B
www.lutron.com/specificationguide | 1.800.523.9466 |
Designer wallplate opening
Maestro Wireless dimmers and switches ®
Available finishes Use BOLD color code in model number (Example: MRF2-600M-PD) Gloss finishes*
LA Light Almond
AL Almond
IV Ivory
GR Gray
BR Brown
BL Black
SW Snow
LS Limestone
BI Biscuit
ES Eggshell
PD Palladium
TP Taupe
ST Stone
BG Bluestone
PL Plum
SG Sea Glass
TQ Turquoise
GS Goldstone
DS Desert Stone
GB Greenbriar
MS Mocha Stone
TC Terracotta
SI Sienna
HT Hot
MR Merlot
MN Midnight
WH White Satin finishes*
SS Stainless Steel
*Coordinating wallplates only available separately. For wallplate information, see pg. 169. Stainless Steel wallplate includes black plastic trim/adapter, visible from side. Match with separate Black (BL) or Midnight (MN) controls. | 1.800.523.9466 | www.lutron.com/specificationguide
Volume 1 P/N 367-1746 REV B
74
Designer wallplate opening
Maestro Wireless dimmers and switches ®
Incandescent/halogen or Magnetic low-voltage dimmers
Wireless dimmers Provides true dimming from each location with companion dimmers or Pico® wireless controls (see pg. 151)
Digital fade dimmer†
Tap on to favorite level; tap off
Multi-location/single-pole*† MRF2-6ND-120-XX1 120 V 600 W/VA Multi-location/single-pole† MRF2-10D-120-XX1 120 V 1000 W/VA
•
Multi-location/single-pole MRF2-6MLV-XX1 120 V 600 W/VA Digital fade dimmers—specification grade
•
Tap twice for full on
•
Press, hold, and release for delayed fade-to-off
•
The stated W (Watt) rating is the maximum incandescent lamp load. Ratings for MLV loads represent the maximum of the total lamp wattage plus MLV transformer loss (typically 20%).
Touch rocker to adjust light level
•
Incandescent/halogen dimmers
Electronic low-voltage dimmers*
Digital fade dimmers† Multi-location/single-pole MRF2-600M-XX 120 V 600 W
Digital fade dimmers† 1
Multi-location/single-pole MRF2-600MTHW-XX2 Dimmer package 120 V 600 W MRF2-600MTHW- model includes Pico wireless control and 1-gang wallplate
XX1: Gloss and Satin Colors® codes, see pg. 74 XX2: Available in Gloss White (WH) and Light Almond (LA) (Wallplates not included. Order separately, see pg. 169)
75
Volume 1 P/N 367-1746 REV B
Multi-location/single-pole* MRF2-6ELV-120-XX1 120 V 600 W Only certain LED drivers are dimmable using an ELV dimmer; for more information visit www.lutron.com/LED.
All models must be derated if ganged unless otherwise noted, see pg. 179. *Requires neutral wire connection. †Minimum load required, see specification submittal.
www.lutron.com/specificationguide | 1.800.523.9466 |
Designer wallplate opening
Maestro Wireless dimmers and switches ®
Connections overview Load connections*
Incandescent/ Halogen
Table Lamp
Magnetic Low-Voltage
MLV Transformer (by others)
Incandescent/ Incandescent/ Incandescent Incandescent/ Halogen Halogen/ Lamp Halogen/ Dimmer MLV Dimmer Dimmer MLV Dimmer Control types (for 2 or more locations) Dim from multiple locations (up to 10)
Light Source
MultiLocation Dimmer
Electronic Fluorescent Low-Voltage Lighting
ELV Transformer (by others)
ELV Dimmer
LED
Lutron Dimming Ballasts
Switched Lighting/Fans
Lutron Hi-lume ® A-Series LED Driver
Fluorescent Dimmer (3-wire only)
Fluorescent Dimmer (3-wire only)
Switch
Dim from multiple locations (up to 10)
Up to 9 Pico® Wireless Controls
Light Source
MultiLocation Dimmer
Up to 9 Companion Dimmers and/or Pico Wireless Controls
Switch from multiple locations (up to 10)
Light Source
MultiLocation Switch
Up to 9 Companion Switches and/or Pico Wireless Controls
Download complete Connection Diagrams
79
Volume 1 P/N 367-1746 REV B
For more information on ballasts, visit www.lutron.com/ballasts. For more information on LED drivers, visit www.lutron.com/LED. *For illustration purposes only. Consult model number pages for specific voltage and capacity information.
www.lutron.com/specificationguide | 1.800.523.9466 |
Appendix | Mounting, ganging, and derating Mounting requirements and how to understand ganging and derating Individual devices Individual dimmers, switches, wall sensors, and accessories typically mount in standard 1-gang electrical boxes (fig. A). Standard ganging Ganging is the side-by-side mounting of two or more dimmers or accessory devices under a multi-gang wallplate. (fig. B-D)
A 1-gang box (W: 2 in x H: 3 in x D: 2.5 in)
B 2-gang box (W: 4 in x H: 3 in x D: 2.5 in)
Standard multi-gang installation: •
Uses standard multi-gang electrical backboxes
•
Uses standard multi-gang wallplates
Requires fins to be removed from dimmers for proper spacing (“Fins Broken” ganging)
C 3-gang box (W: 6 in x H: 3 in x D: 2.5 in)
•
May require derating (i.e., reduction of dimmer capacity due to fin removal); see derating tables, pg. 181
•
Custom Architectural ganging Architectural dimmers, switches and accessories may be ganged without derating (fig. E), via custom Architectural multi-gang: • May require customized, wider-thanstandard wallplates •
• •
D 4-gang box (W: 8 in x H: 3 in x D: 2.5 in)
E (2) 1-gang boxes with 3/4 in spacer
May require wider-than-standard electrical backboxes Allows full capacity (“No Fins Broken”) ganging Required for Nova® dimmers and for larger width (high capacity) architectural controls
Visit www.lutron.com/customganging for additional information
•
Light load power interfaces (pg. 185) Interfaces typically mount to a standard electrical junction box (fig. F); must be mounted within 7 degrees of vertical. Maximum output: 5.1 in x 6.3 in. Interfaces project 1.2 in in front of box. Ceiling/wall mount sensors (pgs. 43 and 147) Wireless ceiling mount Radio Powr SavrTM sensors (fig. G) mount to brackets provided with sensor using adhesive strips or mounting hardware provided.
179
Volume 1 P/N 367-1746 REV B
F Junction box (W: 4 in x H: 4 in x D: 2.5 in)
G Wireless sensor mounting bracket (3.2 in diameter footprint, mounting brackets are spaced 1.8 in)
www.lutron.com/specificationguide | 1.800.523.9466 |
