Netgear WNDR3700 Teardown

Netgear WNDR3700 Teardown

Netgear WNDR3700 Teardown Written By: anythingtoostup

© iFixit — CC BY-NC-SA

www.iFixit.com

Page 1 of 5

Netgear WNDR3700 Teardown

INTRODUCTION New gigabit router simultaneous dual N-band from Netgear. This product includes software code subject to the GPL or LGPL. I'm hopeful for future OPEN-implementations.

TOOLS: T8 Torx Screwdriver (1)

© iFixit — CC BY-NC-SA

www.iFixit.com

Page 2 of 5

Netgear WNDR3700 Teardown

Step 1 — Netgear WNDR3700 Teardown



Unpackage.

Step 2



remove 4 caps.



remove 6 screws.

© iFixit — CC BY-NC-SA

www.iFixit.com

Page 3 of 5

Netgear WNDR3700 Teardown

Step 3



gently open the lid.



uplift the board. this step is very easy!!

Step 4



Remove the shield for microwaves circuit

© iFixit — CC BY-NC-SA

www.iFixit.com

Page 4 of 5

Netgear WNDR3700 Teardown

Step 5 

We can see 8 stand-offs to keep the covers from pressing down on the actual circuits.



Look to the left, outside the shielding and see 4 mini connectors, then follow those to the square pads on the PCB... These are the antennas.

1 This document was last generated on 2017-07-10 05:34:06 AM.

© iFixit — CC BY-NC-SA

www.iFixit.com

Page 5 of 5