product information - Challenge Electronics
Challenge Electronics Tel: 1-800-722-8197 95 East Jefryn Boulevard Deer Park, NY 11729
EMAIL: [email protected]
1-631-595-2217 WEB: WWW.CHALLENGEELECTRONICS.COM Fax: 1-631-667-5484
PRODUCT INFORMATION CES465S161BF08PMN600P8.3FR SQUARE SPEAKER
PART # Lead Free
RoHS
COMPLIANCE
Revision: 1-2012
DESCRIPTION: Challenge Electronics Speaker, 46.5 mm Long, Square shape, 39.6 mm Wide, 16.1 mm High, BF = 1.5 W maximum power, 8 Ohm, Plastic Plated Frame, Mylar Cone, NdFeB Ferrite magnet, 600 Hz. (Fo) Resonant Frequency, PC Pins 8.3 mm High Termination, Foam Cover, RoHS Lead Free Compliant
SPECIFICATIONS Square
Shape Rated Power Effective Frequency Band Sound Pressure Level
8 Ω ± 15%, at 1,000 Hz, 1.0 V
Impedance
DC Resistance
1.0 W W Sine Wave Square Wave Maximum Power Sine Wave 1.5 W Square Wave 600 Hz. to 5,000 Hz. 600 ± 150 Hz., at 1.0 V Resonant Frequency (Fo) 83 ± 3.0 dB(A), at: 1 W, 50 cm, Average 600, 800, 1,000, and 1,200 (Hz ), at 25°C, Baffle board (IEC) 93 ± 3.0 dB(A), at: 0.1 W, 10 cm, Average 600, 800, 1,000, and 1,200 (Hz ), at 25°C, Baffle board (IEC) -40ºC to + 85ºC
Operating Temperature
Storage Temperature 46.5 mm Width (W)
-40ºC to +85ºC
Physical Dimensions
Length or Diameter (L /D)
39.6 mm
Baffle Opening
Length or Diameter (L /D)
mm Ø
Width (W)
mm
Mounting
Length or Diameter (L /D)
46.5 mm
Width (W)
32.5 / 45.8 mm
Distortion
Less than 5% at 1,000 Hz. at 1.0 W.
16.1 mm
Height (H)
3.0 mm
Minimum Opening Recessed Holes size 1.6 mm Ø
Holes
4
Buzz & Rattle
Not be audible at 2.83 V sine wave between 450 Hz and 5,000 Hz.
Polarity
When a positive DC Current is applied to the voice coil terminal marked +or red, the diaphragm shall move forward Magnet NdFeB Ferrite, OD 12.5 mm Ø, H 1.5 mm, grams Frame Plastic, Noryl™
Material
Cone Material
± 10% Gauss Flux Density PEI Mylar
Termination Four, PC Pins, Optional Gasket Qms
Speaker Parameters Approximate Weight Options
Qes
Qts
9 grams
No Shielding Foam Cover on top of the Speaker
Vas
Cms
M
M/N
BL
RoHS Lead Free
Compliance
RELIABILITY Maximum Power Test
With program White-Noise source Maximum Power, 1 minute on, 2 minutes off, 10 cycles, per (EIA) *
Thermal Operating Temperature Test
96 hours continuous operation at Rated Power, at Maximum Rated Operating Temperature *
Thermal Storage Temperature Test
96 hours at Maximum Rated Storage Temperatures *
96 hours continuous operation at Rated Power, at Minimum Rated Operating Temperature * 96 hours at Minimum Rated Storage Temperatures
*
Thermal Shock Test
5 cycles of Minimum and Maximum Operating Temperature Each cycle shell be set per diagram below and is three (3) hours long *
Humidity Test
96 Hours at +40°C±2°C. 90-95% RH *
Operation Life Test
Must perform normal with program White-Noise source at Rated Power for 100 Hours per (EIA)
Insulation Test Termination Strength
*
A minimum of 1 MΩ, measured with 100 Vdc Insulation Resistance Meter, between the Electrical Terminals and the Transducer Case Maximum of 9.8 N (1.0 Kg) load pull test, applied to each terminal in axial direction for 10 seconds
Vibration Test
Parts in shipping Container are subjected to 15minutes of at 1.5 mm with 10 to 55 Hz. vibration frequency to each of 3 perpendicular directions *
Drop Test
Parts in shipping Container are subjected to dropped naturally from 1 meter height onto the surface of 40 mm wooden board, 3 axes (X,Y,Z) directions, 3 times (6 times total) *
*
Parts should conform to original performance within ±5 dB tested with Rated Power, after 3 hours of Reliability Test Performance recovery period.
Warranty
For a period of one (1) year from date of shipping under normal operations conditions This warranty does not apply to products damaged through misuse, abuse, improper installation, alteration, rework, or attempt to repair
The information contained herein is believed to be correct, but no guarantee or warranty, express or implied, with respect to accuracy, completeness or results is extended and no liability is assumed. Challenge Electronics reserves the right to make changes in any specification, data or material contained herein. 1 of 2
Copyright © 2012 Challenge Electronics 12/12/2012
Challenge Electronics Tel: 1-800-722-8197 95 East Jefryn Boulevard Deer Park, NY 11729
DIMENSIONS Units in: mm, Tolerance: ± 0.3 mm unless specified otherwise. 2.0
39.6±0.3 22.0±0.2 2.0
2.4
EMAIL: [email protected]
1-631-595-2217 WEB: WWW.CHALLENGEELECTRONICS.COM Fax: 1-631-667-5484
SPL vs. FREQUENCY RESPONSE
11.3 0.7±0.1
42.5
37.5 Ø
46.5
703 Silicon Glue, Black
2.0
2.0±0.2
6.0±0.2
4.8±0.2
0.8±0.1
32.5±0.2 4.5±0.2
1.6±0.1 2.5±0.1
9.0 16.1
6.0
45° 30°
4.0±0.3
Foam
TEST PROCESS Standard Test Fixture
Speaker
Standard test condition of speaker Microphone B&K Type 4191
Power Amplifier
X
Test Condition STANDARD Temperature: 15 ~ 35ºC Relative humidity: 45% ~ 85% Atmospheric pressure: 860 mbar to 1060mbar
Zero Level: -dB Mode: TSR potentiometer Range: 50dB Sweep Time: 0.5sec
Input Power:
1W
JUDGEMENT
Standard Baffle Board Recommended In IEC 268-5 Where 1650mmx1350mm
Temperature : 20±3ºC Relative humidity: 60% ~ 70% Atmospheric pressure: 860mbar to 1060mbar
Audio Analyzer
Microphone Distance:
X = 50 cm
B&K Type 2012
PACKAGING MARKING
PVC Tube
Magazine Customer PN Other PN if required Quantity Lot and/or Date Code Bundle Number
Dimensions
Shipping Box
Dimensions
Customer Part Number Other PN (if required) Quantity
Quantity
Quantity
Magazine
Net Weight
×50
X3 Dimensions
Y3 Z3
Gross Weighjt
Number of Magazines
Box Number of Number of Boxes Made in China
Quantity Approximate Weight
The information contained herein is believed to be correct, but no guarantee or warranty, express or implied, with respect to accuracy, completeness or results is extended and no liability is assumed. Challenge Electronics reserves the right to make changes in any specification, data or material contained herein. 2 of 2
cm cm cm
X2 Y2 Z2
SHIPPING BOX
Lot and/or Date Code PO Number
cm cm cm 11
X1 Y1 Z1
58 cm 28 cm 28 cm 50 550 9 Kg.
Copyright © 2012 Challenge Electronics 12/12/2012
EMAIL: [email protected]
1-631-595-2217 WEB: WWW.CHALLENGEELECTRONICS.COM Fax: 1-631-667-5484
PRODUCT INFORMATION CES465S161BF08PMN600P8.3FR SQUARE SPEAKER
PART # Lead Free
RoHS
COMPLIANCE
Revision: 1-2012
DESCRIPTION: Challenge Electronics Speaker, 46.5 mm Long, Square shape, 39.6 mm Wide, 16.1 mm High, BF = 1.5 W maximum power, 8 Ohm, Plastic Plated Frame, Mylar Cone, NdFeB Ferrite magnet, 600 Hz. (Fo) Resonant Frequency, PC Pins 8.3 mm High Termination, Foam Cover, RoHS Lead Free Compliant
SPECIFICATIONS Square
Shape Rated Power Effective Frequency Band Sound Pressure Level
8 Ω ± 15%, at 1,000 Hz, 1.0 V
Impedance
DC Resistance
1.0 W W Sine Wave Square Wave Maximum Power Sine Wave 1.5 W Square Wave 600 Hz. to 5,000 Hz. 600 ± 150 Hz., at 1.0 V Resonant Frequency (Fo) 83 ± 3.0 dB(A), at: 1 W, 50 cm, Average 600, 800, 1,000, and 1,200 (Hz ), at 25°C, Baffle board (IEC) 93 ± 3.0 dB(A), at: 0.1 W, 10 cm, Average 600, 800, 1,000, and 1,200 (Hz ), at 25°C, Baffle board (IEC) -40ºC to + 85ºC
Operating Temperature
Storage Temperature 46.5 mm Width (W)
-40ºC to +85ºC
Physical Dimensions
Length or Diameter (L /D)
39.6 mm
Baffle Opening
Length or Diameter (L /D)
mm Ø
Width (W)
mm
Mounting
Length or Diameter (L /D)
46.5 mm
Width (W)
32.5 / 45.8 mm
Distortion
Less than 5% at 1,000 Hz. at 1.0 W.
16.1 mm
Height (H)
3.0 mm
Minimum Opening Recessed Holes size 1.6 mm Ø
Holes
4
Buzz & Rattle
Not be audible at 2.83 V sine wave between 450 Hz and 5,000 Hz.
Polarity
When a positive DC Current is applied to the voice coil terminal marked +or red, the diaphragm shall move forward Magnet NdFeB Ferrite, OD 12.5 mm Ø, H 1.5 mm, grams Frame Plastic, Noryl™
Material
Cone Material
± 10% Gauss Flux Density PEI Mylar
Termination Four, PC Pins, Optional Gasket Qms
Speaker Parameters Approximate Weight Options
Qes
Qts
9 grams
No Shielding Foam Cover on top of the Speaker
Vas
Cms
M
M/N
BL
RoHS Lead Free
Compliance
RELIABILITY Maximum Power Test
With program White-Noise source Maximum Power, 1 minute on, 2 minutes off, 10 cycles, per (EIA) *
Thermal Operating Temperature Test
96 hours continuous operation at Rated Power, at Maximum Rated Operating Temperature *
Thermal Storage Temperature Test
96 hours at Maximum Rated Storage Temperatures *
96 hours continuous operation at Rated Power, at Minimum Rated Operating Temperature * 96 hours at Minimum Rated Storage Temperatures
*
Thermal Shock Test
5 cycles of Minimum and Maximum Operating Temperature Each cycle shell be set per diagram below and is three (3) hours long *
Humidity Test
96 Hours at +40°C±2°C. 90-95% RH *
Operation Life Test
Must perform normal with program White-Noise source at Rated Power for 100 Hours per (EIA)
Insulation Test Termination Strength
*
A minimum of 1 MΩ, measured with 100 Vdc Insulation Resistance Meter, between the Electrical Terminals and the Transducer Case Maximum of 9.8 N (1.0 Kg) load pull test, applied to each terminal in axial direction for 10 seconds
Vibration Test
Parts in shipping Container are subjected to 15minutes of at 1.5 mm with 10 to 55 Hz. vibration frequency to each of 3 perpendicular directions *
Drop Test
Parts in shipping Container are subjected to dropped naturally from 1 meter height onto the surface of 40 mm wooden board, 3 axes (X,Y,Z) directions, 3 times (6 times total) *
*
Parts should conform to original performance within ±5 dB tested with Rated Power, after 3 hours of Reliability Test Performance recovery period.
Warranty
For a period of one (1) year from date of shipping under normal operations conditions This warranty does not apply to products damaged through misuse, abuse, improper installation, alteration, rework, or attempt to repair
The information contained herein is believed to be correct, but no guarantee or warranty, express or implied, with respect to accuracy, completeness or results is extended and no liability is assumed. Challenge Electronics reserves the right to make changes in any specification, data or material contained herein. 1 of 2
Copyright © 2012 Challenge Electronics 12/12/2012
Challenge Electronics Tel: 1-800-722-8197 95 East Jefryn Boulevard Deer Park, NY 11729
DIMENSIONS Units in: mm, Tolerance: ± 0.3 mm unless specified otherwise. 2.0
39.6±0.3 22.0±0.2 2.0
2.4
EMAIL: [email protected]
1-631-595-2217 WEB: WWW.CHALLENGEELECTRONICS.COM Fax: 1-631-667-5484
SPL vs. FREQUENCY RESPONSE
11.3 0.7±0.1
42.5
37.5 Ø
46.5
703 Silicon Glue, Black
2.0
2.0±0.2
6.0±0.2
4.8±0.2
0.8±0.1
32.5±0.2 4.5±0.2
1.6±0.1 2.5±0.1
9.0 16.1
6.0
45° 30°
4.0±0.3
Foam
TEST PROCESS Standard Test Fixture
Speaker
Standard test condition of speaker Microphone B&K Type 4191
Power Amplifier
X
Test Condition STANDARD Temperature: 15 ~ 35ºC Relative humidity: 45% ~ 85% Atmospheric pressure: 860 mbar to 1060mbar
Zero Level: -dB Mode: TSR potentiometer Range: 50dB Sweep Time: 0.5sec
Input Power:
1W
JUDGEMENT
Standard Baffle Board Recommended In IEC 268-5 Where 1650mmx1350mm
Temperature : 20±3ºC Relative humidity: 60% ~ 70% Atmospheric pressure: 860mbar to 1060mbar
Audio Analyzer
Microphone Distance:
X = 50 cm
B&K Type 2012
PACKAGING MARKING
PVC Tube
Magazine Customer PN Other PN if required Quantity Lot and/or Date Code Bundle Number
Dimensions
Shipping Box
Dimensions
Customer Part Number Other PN (if required) Quantity
Quantity
Quantity
Magazine
Net Weight
×50
X3 Dimensions
Y3 Z3
Gross Weighjt
Number of Magazines
Box Number of Number of Boxes Made in China
Quantity Approximate Weight
The information contained herein is believed to be correct, but no guarantee or warranty, express or implied, with respect to accuracy, completeness or results is extended and no liability is assumed. Challenge Electronics reserves the right to make changes in any specification, data or material contained herein. 2 of 2
cm cm cm
X2 Y2 Z2
SHIPPING BOX
Lot and/or Date Code PO Number
cm cm cm 11
X1 Y1 Z1
58 cm 28 cm 28 cm 50 550 9 Kg.
Copyright © 2012 Challenge Electronics 12/12/2012
