product information - Challenge Electronics
Challenge Electronics Tel: 1-800-722-8197
EMAIL: [email protected]
1-631-595-2217 WEB: WWW.CHALLENGEELECTRONICS.COM Fax: 1-631-667-5484
95 East Jefryn Boulevard Deer Park, NY 11729
PRODUCT INFORMATION CES102S470KF4APN110TGR
PART # Lead Free
Revision: 1-2012
4” SQUARE SPEAKER
RoHS
COMPLIANCE
DESCRIPTION:
Challenge Electronics Speaker; 102.0 mm Long; Square shape; 102 mm Wide; 47.0 mm High; KF = 15 W maximum power; 4 Ohm; Black Anodized Steel Frame; Paper Cone; NdFeB Ferrite magnet; (Fo) 110 Hz. Resonant Frequency; Terminal Lugs Termination; Gasket for mounting; RoHS Lead Free Compliant
SPECIFICATIONS Square
Shape Rated Power
Sine Wave
4 Ω ± 15%, at 1,000 Hz, 1.0 V
Impedance
8W
Square Wave
W
Maximum Power
100 Hz. to 18,000 Hz.
Effective Frequency Band
3.6 Ω ± 15%
DC Resistance
Sine Wave
15 W
W
Square Wave
110.8 Hz. ± 20%, at 1.0 V
Resonant Frequency (Fo)
83.5 ± 3.0 dB(A), at: 1 W, 1.0 m, Average 1,000, 1,500, and 2,000 (Hz ), at 25°C, Baffle board (IEC)
Sound Pressure Level
-20ºC to + 60ºC
Operating Temperature
-30ºC to +70ºC
Storage Temperature
Physical Dimensions
Length or Diameter (L /D) 102.0 mm
Width (W)
102.0 mm
Baffle Opening
Length or Diameter (L /D) 99.0 mm Ø
Width (W)
mm
Mounting
Length or Diameter (L /D)
Width (W)
81.7 mm
Distortion
Less than 5% at 1,000 Hz. at 1.0 W.
81.7 mm
47.0 mm
Height (H)
3.0 mm
Minimum Opening Recessed Holes size
7.0 L X 4.8 W mm
4
Holes
Buzz & Rattle
Not be audible at 4 V sine wave between 20 Hz and 10,000 Hz.
Polarity
When a positive DC Current is applied to the voice coil terminal marked +or red, the diaphragm shall move forward Magnet Y20 NdFeB Ferrite, OD 70 mm Ø, ID 32 mm Ø, H 10 mm Frame Black Anodized Steel
Material
Termination
± 10% Gauss
Flux Density Paper
Cone Material
Terminal Lugs for wire leads soldering. (Caution, overheating the terminal may damage connections of voice coil leads)
Optional Gasket Yes, OD 100 mm Ø, ID 94 mm Ø, H 2.4 mm, Plastic Speaker Parameters
Qts 1.789
Approximate Weight
400 grams
Vas 2.33L
BL 1.89 T
Shielding
Vas
None
Cms
M
M/N
BL
RoHS Lead Free
Compliance
Options
RELIABILITY Maximum Power Test
With program White-Noise source Maximum Power, 1 minute on, 2 minutes off, 10 cycles, per (EIA) *
Thermal Operating Temperature Test
96 hours continuous operation at Rated Power, at Minimum Rated Operating Temperature *
Thermal Storage Temperature Test
96 hours at Minimum Rated Storage Temperatures, no Power
96 hours continuous operation at Rated Power, at Maximum Rated Operating Temperature * 96 hours at Maximum Rated Storage Temperatures, no Power * * SINGLE CYCLE
Thermal Shock Test
5 cycles of Minimum and Maximum Operating Temperature Each cycle shell be set per diagram below and is three (3) hours long *
Maximum °C
25°C 15
Minutes 30
45
60
90
120
150
180
210
Minimum °C
Humidity Test
96 Hours at +40°C±2°C. 90-95% RH *
Insulation Test
A minimum of 1 MΩ, measured with 100 Vdc Insulation Resistance Meter, between the Electrical Terminals and the Transducer Case
Vibration Test
15 minutes at 1.5 mm with 10 to 55 Hz. vibration frequency to each of 3 perpendicular directions *
Termination Strength
Maximum of 9.8 N (1.0 Kg) load pull test, applied to each terminal in axial direction for 10 seconds
Drop Test
Dropped naturally from 1 meter height onto the surface of 40 mm wooden board, 3 axes (X,Y,Z) directions, 3 times (6 times total) *
*
Parts should conform to original performance within ±5 dB tested with Rated Power, after 3 hours of recovery period.
Reliability Test Performance
Operation Life Test Warranty
Must perform normal with program White-Noise source at Rated Power for 100 Hours per (EIA)
*
For a period of one (1) year from date of shipping under normal operations conditions This warranty does not apply to products damaged through misuse, abuse, improper installation, alteration, rework, or attempt to repair
The information contained herein is believed to be correct, but no guarantee or warranty, express or implied, with respect to accuracy, completeness or results is extended and no liability is assumed. Challenge Electronics reserves the right to make changes in any specification, data or material contained herein.
1 of 3
Copyright © 2012 Challenge Electronics 12/17/2012
Challenge Electronics Tel: 1-800-722-8197 DIMENSIONS
EMAIL: [email protected]
1-631-595-2217 WEB: WWW.CHALLENGEELECTRONICS.COM Fax: 1-631-667-5484
95 East Jefryn Boulevard Deer Park, NY 11729
Units in: mm, Tolerance: ± 0.3 mm unless specified otherwise
86.5 81.7 Ø102.0
(+)
95.0
China
81.7 61.0
Ø4.0
CHALLANGE CES-102S470K F4APN110TGR 4 OHM
95.0
4.8 70.0 Ø 64.0 Ø 2.4 3.1
6.9
10.0 47.0
Mounting Washer Seal
93.9 Ø 99.0 Ø 102.0 Ø
5.4
SPL vs. FREQUENCY RESPONSE
IMPEADANCE vs. FREQUENCY RESPONSE
TEST PROCESS Speaker
Standard test condition of speaker Microphone B&K Type 4191
Standard Test Fixture
Power Amplifier
Test Condition STANDARD Temperature: 15 ~ 35ºC 45% ~ 85% Relative humidity: Atmospheric pressure: 860 mbar to 1060mbar
X Standard Baffle Board Recommended In IEC 268-5 W here 1650mmx1350mm
Audio Analyzer
20±3ºC 60% ~ 70% 860mbar to 1060mbar
B&K Type 2012
The information contained herein is believed to be correct, but no guarantee or warranty, express or implied, with respect to accuracy, completeness or results is extended and no liability is assumed. Challenge Electronics reserves the right to make changes in any specification, data or material contained herein.
2 of 3
-dB TSR 50dB 0.5sec
Input Power:
1W
JUDGEMENT Temperature : Relative humidity: Atmospheric pressure:
Zero Level: Mode: potentiometer Range: Sweep Time:
Microphone Distance:
X = 100 cm
Copyright © 2012 Challenge Electronics 12/17/2012
Challenge Electronics Tel: 1-800-722-8197
EMAIL: [email protected]
1-631-595-2217 WEB: WWW.CHALLENGEELECTRONICS.COM Fax: 1-631-667-5484
95 East Jefryn Boulevard Deer Park, NY 11729
PACKAGING MARKING
TWO BUNDLE
ONE TRAY: X1 Y1
Bundle Customer PN Other PN if required Quantity Lot and/or Date Code Bundle Number
Shipping Box ITEM: C/N0: MADE IN CHINA
Y2
X2
ONE BUNDLE: SHIPPING BOX
Z3
6 ITEM: C/N0:
TOP COVER
MODEL QTY N.W G.W SIZE LOT NO
MADE IN CHINA
PCS KG KG
X3
MODEL QTY N.W G.W SIZE LOT NO
PCS KG KG
Y3
Customer Part Number Other PN (if required) Quantity Lot and/or Date Code PO Number Net Weight Gross Weighjt Box Number of Number of Boxes Made in China
The information contained herein is believed to be correct, but no guarantee or warranty, express or implied, with respect to accuracy, completeness or results is extended and no liability is assumed. Challenge Electronics reserves the right to make changes in any specification, data or material contained herein.
3 of 3
TRAY X1 Y1 Z1
Dimensions
cm cm cm
Quantity
BUNDLE Dimensions
X2 Y2 Z2
cm cm cm
Quantity
SHIPPING BOX X3 Y3 Z3 Number of Bundles Quantity Approximate Weight Dimensions
cm cm cm
Copyright © 2012 Challenge Electronics 12/17/2012
EMAIL: [email protected]
1-631-595-2217 WEB: WWW.CHALLENGEELECTRONICS.COM Fax: 1-631-667-5484
95 East Jefryn Boulevard Deer Park, NY 11729
PRODUCT INFORMATION CES102S470KF4APN110TGR
PART # Lead Free
Revision: 1-2012
4” SQUARE SPEAKER
RoHS
COMPLIANCE
DESCRIPTION:
Challenge Electronics Speaker; 102.0 mm Long; Square shape; 102 mm Wide; 47.0 mm High; KF = 15 W maximum power; 4 Ohm; Black Anodized Steel Frame; Paper Cone; NdFeB Ferrite magnet; (Fo) 110 Hz. Resonant Frequency; Terminal Lugs Termination; Gasket for mounting; RoHS Lead Free Compliant
SPECIFICATIONS Square
Shape Rated Power
Sine Wave
4 Ω ± 15%, at 1,000 Hz, 1.0 V
Impedance
8W
Square Wave
W
Maximum Power
100 Hz. to 18,000 Hz.
Effective Frequency Band
3.6 Ω ± 15%
DC Resistance
Sine Wave
15 W
W
Square Wave
110.8 Hz. ± 20%, at 1.0 V
Resonant Frequency (Fo)
83.5 ± 3.0 dB(A), at: 1 W, 1.0 m, Average 1,000, 1,500, and 2,000 (Hz ), at 25°C, Baffle board (IEC)
Sound Pressure Level
-20ºC to + 60ºC
Operating Temperature
-30ºC to +70ºC
Storage Temperature
Physical Dimensions
Length or Diameter (L /D) 102.0 mm
Width (W)
102.0 mm
Baffle Opening
Length or Diameter (L /D) 99.0 mm Ø
Width (W)
mm
Mounting
Length or Diameter (L /D)
Width (W)
81.7 mm
Distortion
Less than 5% at 1,000 Hz. at 1.0 W.
81.7 mm
47.0 mm
Height (H)
3.0 mm
Minimum Opening Recessed Holes size
7.0 L X 4.8 W mm
4
Holes
Buzz & Rattle
Not be audible at 4 V sine wave between 20 Hz and 10,000 Hz.
Polarity
When a positive DC Current is applied to the voice coil terminal marked +or red, the diaphragm shall move forward Magnet Y20 NdFeB Ferrite, OD 70 mm Ø, ID 32 mm Ø, H 10 mm Frame Black Anodized Steel
Material
Termination
± 10% Gauss
Flux Density Paper
Cone Material
Terminal Lugs for wire leads soldering. (Caution, overheating the terminal may damage connections of voice coil leads)
Optional Gasket Yes, OD 100 mm Ø, ID 94 mm Ø, H 2.4 mm, Plastic Speaker Parameters
Qts 1.789
Approximate Weight
400 grams
Vas 2.33L
BL 1.89 T
Shielding
Vas
None
Cms
M
M/N
BL
RoHS Lead Free
Compliance
Options
RELIABILITY Maximum Power Test
With program White-Noise source Maximum Power, 1 minute on, 2 minutes off, 10 cycles, per (EIA) *
Thermal Operating Temperature Test
96 hours continuous operation at Rated Power, at Minimum Rated Operating Temperature *
Thermal Storage Temperature Test
96 hours at Minimum Rated Storage Temperatures, no Power
96 hours continuous operation at Rated Power, at Maximum Rated Operating Temperature * 96 hours at Maximum Rated Storage Temperatures, no Power * * SINGLE CYCLE
Thermal Shock Test
5 cycles of Minimum and Maximum Operating Temperature Each cycle shell be set per diagram below and is three (3) hours long *
Maximum °C
25°C 15
Minutes 30
45
60
90
120
150
180
210
Minimum °C
Humidity Test
96 Hours at +40°C±2°C. 90-95% RH *
Insulation Test
A minimum of 1 MΩ, measured with 100 Vdc Insulation Resistance Meter, between the Electrical Terminals and the Transducer Case
Vibration Test
15 minutes at 1.5 mm with 10 to 55 Hz. vibration frequency to each of 3 perpendicular directions *
Termination Strength
Maximum of 9.8 N (1.0 Kg) load pull test, applied to each terminal in axial direction for 10 seconds
Drop Test
Dropped naturally from 1 meter height onto the surface of 40 mm wooden board, 3 axes (X,Y,Z) directions, 3 times (6 times total) *
*
Parts should conform to original performance within ±5 dB tested with Rated Power, after 3 hours of recovery period.
Reliability Test Performance
Operation Life Test Warranty
Must perform normal with program White-Noise source at Rated Power for 100 Hours per (EIA)
*
For a period of one (1) year from date of shipping under normal operations conditions This warranty does not apply to products damaged through misuse, abuse, improper installation, alteration, rework, or attempt to repair
The information contained herein is believed to be correct, but no guarantee or warranty, express or implied, with respect to accuracy, completeness or results is extended and no liability is assumed. Challenge Electronics reserves the right to make changes in any specification, data or material contained herein.
1 of 3
Copyright © 2012 Challenge Electronics 12/17/2012
Challenge Electronics Tel: 1-800-722-8197 DIMENSIONS
EMAIL: [email protected]
1-631-595-2217 WEB: WWW.CHALLENGEELECTRONICS.COM Fax: 1-631-667-5484
95 East Jefryn Boulevard Deer Park, NY 11729
Units in: mm, Tolerance: ± 0.3 mm unless specified otherwise
86.5 81.7 Ø102.0
(+)
95.0
China
81.7 61.0
Ø4.0
CHALLANGE CES-102S470K F4APN110TGR 4 OHM
95.0
4.8 70.0 Ø 64.0 Ø 2.4 3.1
6.9
10.0 47.0
Mounting Washer Seal
93.9 Ø 99.0 Ø 102.0 Ø
5.4
SPL vs. FREQUENCY RESPONSE
IMPEADANCE vs. FREQUENCY RESPONSE
TEST PROCESS Speaker
Standard test condition of speaker Microphone B&K Type 4191
Standard Test Fixture
Power Amplifier
Test Condition STANDARD Temperature: 15 ~ 35ºC 45% ~ 85% Relative humidity: Atmospheric pressure: 860 mbar to 1060mbar
X Standard Baffle Board Recommended In IEC 268-5 W here 1650mmx1350mm
Audio Analyzer
20±3ºC 60% ~ 70% 860mbar to 1060mbar
B&K Type 2012
The information contained herein is believed to be correct, but no guarantee or warranty, express or implied, with respect to accuracy, completeness or results is extended and no liability is assumed. Challenge Electronics reserves the right to make changes in any specification, data or material contained herein.
2 of 3
-dB TSR 50dB 0.5sec
Input Power:
1W
JUDGEMENT Temperature : Relative humidity: Atmospheric pressure:
Zero Level: Mode: potentiometer Range: Sweep Time:
Microphone Distance:
X = 100 cm
Copyright © 2012 Challenge Electronics 12/17/2012
Challenge Electronics Tel: 1-800-722-8197
EMAIL: [email protected]
1-631-595-2217 WEB: WWW.CHALLENGEELECTRONICS.COM Fax: 1-631-667-5484
95 East Jefryn Boulevard Deer Park, NY 11729
PACKAGING MARKING
TWO BUNDLE
ONE TRAY: X1 Y1
Bundle Customer PN Other PN if required Quantity Lot and/or Date Code Bundle Number
Shipping Box ITEM: C/N0: MADE IN CHINA
Y2
X2
ONE BUNDLE: SHIPPING BOX
Z3
6 ITEM: C/N0:
TOP COVER
MODEL QTY N.W G.W SIZE LOT NO
MADE IN CHINA
PCS KG KG
X3
MODEL QTY N.W G.W SIZE LOT NO
PCS KG KG
Y3
Customer Part Number Other PN (if required) Quantity Lot and/or Date Code PO Number Net Weight Gross Weighjt Box Number of Number of Boxes Made in China
The information contained herein is believed to be correct, but no guarantee or warranty, express or implied, with respect to accuracy, completeness or results is extended and no liability is assumed. Challenge Electronics reserves the right to make changes in any specification, data or material contained herein.
3 of 3
TRAY X1 Y1 Z1
Dimensions
cm cm cm
Quantity
BUNDLE Dimensions
X2 Y2 Z2
cm cm cm
Quantity
SHIPPING BOX X3 Y3 Z3 Number of Bundles Quantity Approximate Weight Dimensions
cm cm cm
Copyright © 2012 Challenge Electronics 12/17/2012
