Riverside

Riverside FURNITURE

email: [email protected]

Page 1 of 2

Vogue Dining Room Assembly Instructions

Made in Viet Nam

Components and Hardware List (for one Chair) Chair Back

A

Chair Seat

1 pc.

M5/16"-18 x 2" Long Allen Head Bolt

E

5 pcs.

5mm Allen Wrench

I

1 pc.

B

1 pc.

M5/16"-18 x 3" Long Allen Head Bolt

F

4 pcs.

Arm (right and left)

C

1 pc. Left 1 pc. Right

5/16" Spring Washer

G

Front Leg (right and left)

D

5/16" *19*2mm Flat Washer

H

9 pcs.

#8 x 1-1/4" Wood Screw

J

1 pc. Left 1 pc. Right

#46158 Arm Chair 2in

9 pcs.

Besuretocheckalpackingmaterialcarefuly forsmalpartsw , hichmayhavecomeloose insidethecartonduringshipment.

4 pcs.

Step 1 I B

I

E

F

G

H

G H

A

Step 2

Steps: 1. Place the Back Assembly (A) on a soft and smooth surface. 2. Attach the Chair Seat (B) to the Back Assembly (A) by using the 3" long Bolt (F) Spring Washer (G) and Flat Washer (H) into the back corners of the Seat and 2" long Bolt (E) Spring Washer (G) and Flat Washer (H) into the middle of the Seat, as shown. Do not fully tighten Bolts until Step 6

Riverside FURNITURE

email:

[email protected]

Vogue Dining Room Assembly Instructions C

Page 2 of 2

Made in Viet Nam

D (Right)

B

H A

G

E

I

Step 3 3. Attach the Left and Right Front Legs (D) to the Chair Seat (B) by using the 2" long Bolts (E) Spring Washer (G) and Flat Washer (H) as shown in Step 3. Do not fully tighten Bolts. 4. Attach the Left and Right Arms (C) as shown. Pull each Front Leg, Arm and Back snug together to verify the parts are assembled correctly. 5. Set the assembled Chair upright on a flat surface to level Chair. While pulling the back end of Arm snug to the Chair Back and using your Phillips Screwdriver install the Wood Screw (J) underneath. Repeat for both ends of the Arms. 6. Reach underneath the Seat and using the Allen Wrench (I), tighten all the Bolts.

J Step 5 C (Right)

J C (Left)