Single Pole Connectors
Single Pole Connectors Index Rating Single Pole Connectors 300A - 400A, 600V AC
Type Features and Benefits Plugs/Receptacles/Protective Caps/Accessories Dimensions Specifications Installation Instructions
Page Number F-3 F-4 F-5 F-5 F-6
Single Pole Connectors
Section F
Index
Dimensions in Inches (mm)
www.hubbell-wiring.com
?????
Single SinglePole PoleConnectorse Connectors
Single Pole Connectors
Single Pole Connectors
Single Pole Connectors
Male and Female Plugs Features and Benefits
FEMALE PLUG
Double set screw terminations.
Cable jacket retaining wire.
High conductivity brass contacts.
MALE PLUG
Ribbed housing for superior gripping.
Easily identifiable cable cut off points for secure fit.
Non conductive retaining pin.
Molded in non-metallic locking ring.
Dimensions in Inches (mm)
The contacts are made of high conductivity brass. Male contacts are self compensated for wear. This provides a more, reliable connection reducing the possibility of arcing or burning of contacts. In addition contacts and sleeves are reusable.
Double cam design.
All housings are color coded in one of five different colors for convenient phase identification. The specially formulated rubber housing provides a shroud for the male and female contacts. The shroud protects the contacts from abuse while limiting access to live parts.
The product is UL Listed and CSA Certified.The product has an environmental rating of NEMA 3R.
www.hubbell-wiring.com
Features and Benefits
These single pole connectors have been designed with ease of assembly and disassembly in mind. No special tools are required. A high strength nonconductive retaining pin is all that is needed to securely lock the contacts to the insulated sleeve. Simply align the holes of the housing and contact and insert the pin, it’s that easy. Disassembly is just as easy, simply push the pin out of the contact and housing then remove the cable and contact.
Color coded insulated sleeves.
F-3
Single Pole Connectors
Single Pole Connectors
300 and 400 Ampere, 600 Volts Maximum Plugs, Receptacles, Protective Caps and Accessories
Plugs
HBL400PTBK
Amp
Color
300A 300A 300A 300A 300A 400A 400A 400A 400A 400A
Black White Red Blue Green Black White Red Blue Green
Cable Size #4 - 2/0 #4 - 2/0 #4 - 2/0 #4 - 2/0 #4 - 2/0 2/0 - 4/0 2/0 - 4/0 2/0 - 4/0 2/0 - 4/0 2/0 - 4/0
Male Plug HBL200PTBK HBL200PTW HBL200PTR HBL200PTBL HBL200PTGN HBL400PTBK HBL400PTW HBL400PTR HBL400PTBL HBL400PTGN
Female Plug HBL200CTBK HBL200CTW HBL200CTR HBL200CTBL HBL200CTGN HBL400CTBK HBL400CTW HBL400CTR HBL400CTBL HBL400CTGN
Panel Mount Receptacle; 1/2” - 13 UNC Thread Stud Amp
Color
Cable Size
Male Receptacle
Female Receptacle
400A 400A 400A 400A 400A
Black White Red Blue Green
#4 - 4/0 #4 - 4/0 #4 - 4/0 #4 - 4/0 #4 - 4/0
HBLSITBK HBLSITW HBLSITR HBLSITBL HBLSITGN
HBLSRTBK HBLSRTW HBLSRTR HBLSRTBL HBLSRTGN
HBL400CTBK
Panel Mount Receptacle; Double Set Screw
HBLSRTBK
Amp
Color
400A 400A 400A 400A 400A
Black White Red Blue Green
Cable Size 2/0 - 4/0 2/0 - 4/0 2/0 - 4/0 2/0 - 4/0 2/0 - 4/0
Male Receptacle HBL400ITBK HBL400ITW HBL400ITR HBL400ITBL HBL400ITGN
Female Receptacle HBL400RTBK HBL400RTW HBL400RTR HBL400RTBL HBL400RTGN
Male HBLMCAPBK HBLMCAPW HBLMCAPR HBLMCAPBL HBLMCAPGN
Female HBLFCAPBK HBLFCAPW HBLFCAPR HBLFCAPBL HBLFCAPGN
Protective Caps Color Black White Red Blue Green
HBL400ITBK
Accessories Tapping “T” Connector HBLTBK
HBLMCAPBK
Distribution Block HBL7DB
HBLFCAPBK HBLTBK
F-4
TRI - TAP Connector HBL3TAP
HBL3TAP
www.hubbell-wiring.com
HBL7DB
Dimensions in Inches (mm)
Single Pole Connectors
Single Pole Connectors
Technical Specifications 300 and 400 Ampere
Specifications Electrical Voltage Rating Amperage Rating
600 Volts Maximum. 400A Maximum.
Mechanical Terminal Accommodation
Plug – 300A – #4 – 2/0 Plug – 400A – 2/0 – 4/0 Recpt. – 400A – 2/0 –
4/0 Product Identification
Ratings are a permanent part of device. Thermoset Rubber Brass Phenolic
Base Compound Contact Material Retaining Pin Material
Environmental UL Listed and CSA Certified. NEMA 3R rated. Flammability: HB or better per UL94 or CSA 22.2. 0.17 UL 498 for attachment plugs and receptacles. UL 1691 draft standard for single pin and sleeve devices intended for theatre, stage and studio applications. National Electric Code (NEC), ANSI/NFPA 70.
Ampacity Chart (Type SC/PPC Wire) Cable Size #4 #2 2/0 4/0
Ampacity* 140 190 300 405
Note: * 90 Deg. C column NEC Table 400.5(B).
Dimensional Information (in/mm) A B
B
D
B
C
A
C E
A
D
C
Panel Mount Receptacle; 1/2”-13 UNC Thread Stud
Male Plug A 6.75” (171.36)
B 2.08” (52.81)
C 1.48” (37.6)
D A B 3.20” 2.22” 2.22” (81.30) (56.36) (56.36)
C 1.50” (38.1)
D 4.36” (111.3)
E 1.48” (37.6)
Tapping Tee A 1.48” (37.6)
B 2.03” (51.56)
C 4.89” (124.14)
B B
A
D
B C
A
C E
A
C
D
Panel Mount Receptacle; Double Set Screw
Female Plug A 6.73” (170.86)
B 2.08” (52.81)
C 1.07” (27.2)
D A 3.17” 2.25” (80.48) (57.2)
Distribution Box B 4” (101.6)
Dimensions in Inches (mm)
C 1.50” (38.1)
D 4.40” (111.7)
E 1.48” (37.6)
B 8.00” (203.09)
C 1.73” (43.92)
C
A C 3.25” (82.6)
A 8.34” (211.8)
B
Specifications
A 14” (355.6)
B 2.25” (57.2)
Single Pin TRI-TAP
www.hubbell-wiring.com
F-5
Single Pole Connectors
Single Pole Connectors
Installations Instructions Male and Female Plugs
Step 1 Push cord through back end of housing and out the front side, leaving at least 6 inches of cable past the front end. Strip cord jacket 1 1/2 inches.
Step 2 Wrap solid copper wire (supplied with the product) tightly around cable jacket approximately 1/4 inch from stripped end, leaving equal lengths loose. Twist wire securely (compressing the cable jacket) with pliers 4 or 5 times around the cord.
Step 3 Join the remaining lengths of the solid copper wire together and parallel with strands of the conductor.
Step 4 Wrap copper flashing (supplied with the product) around conductor strands and solid wire so it is flush with the end of the strands.
Installation Instructions
Step 5 Slide wire bundle into contacts as far as possible and tighten the 2 set screws securely to 200 lb in. torque.
Step 6 Position contact into housing and line up hole in contact with the hole in the housing. For the male contact (pin), entrance groove is on same side as raised surface on housing. For female contact (sleeve), button is on same side as the raised surface on the housing. Press retaining pin through housing and contact until even on both sides.
Note: For Male and Female Receptacles Mount on panel with 4 screws. Mounting hole pattern is square with 1.5” centers.
F-6
www.hubbell-wiring.com
Dimensions in Inches (mm)
Type Features and Benefits Plugs/Receptacles/Protective Caps/Accessories Dimensions Specifications Installation Instructions
Page Number F-3 F-4 F-5 F-5 F-6
Single Pole Connectors
Section F
Index
Dimensions in Inches (mm)
www.hubbell-wiring.com
?????
Single SinglePole PoleConnectorse Connectors
Single Pole Connectors
Single Pole Connectors
Single Pole Connectors
Male and Female Plugs Features and Benefits
FEMALE PLUG
Double set screw terminations.
Cable jacket retaining wire.
High conductivity brass contacts.
MALE PLUG
Ribbed housing for superior gripping.
Easily identifiable cable cut off points for secure fit.
Non conductive retaining pin.
Molded in non-metallic locking ring.
Dimensions in Inches (mm)
The contacts are made of high conductivity brass. Male contacts are self compensated for wear. This provides a more, reliable connection reducing the possibility of arcing or burning of contacts. In addition contacts and sleeves are reusable.
Double cam design.
All housings are color coded in one of five different colors for convenient phase identification. The specially formulated rubber housing provides a shroud for the male and female contacts. The shroud protects the contacts from abuse while limiting access to live parts.
The product is UL Listed and CSA Certified.The product has an environmental rating of NEMA 3R.
www.hubbell-wiring.com
Features and Benefits
These single pole connectors have been designed with ease of assembly and disassembly in mind. No special tools are required. A high strength nonconductive retaining pin is all that is needed to securely lock the contacts to the insulated sleeve. Simply align the holes of the housing and contact and insert the pin, it’s that easy. Disassembly is just as easy, simply push the pin out of the contact and housing then remove the cable and contact.
Color coded insulated sleeves.
F-3
Single Pole Connectors
Single Pole Connectors
300 and 400 Ampere, 600 Volts Maximum Plugs, Receptacles, Protective Caps and Accessories
Plugs
HBL400PTBK
Amp
Color
300A 300A 300A 300A 300A 400A 400A 400A 400A 400A
Black White Red Blue Green Black White Red Blue Green
Cable Size #4 - 2/0 #4 - 2/0 #4 - 2/0 #4 - 2/0 #4 - 2/0 2/0 - 4/0 2/0 - 4/0 2/0 - 4/0 2/0 - 4/0 2/0 - 4/0
Male Plug HBL200PTBK HBL200PTW HBL200PTR HBL200PTBL HBL200PTGN HBL400PTBK HBL400PTW HBL400PTR HBL400PTBL HBL400PTGN
Female Plug HBL200CTBK HBL200CTW HBL200CTR HBL200CTBL HBL200CTGN HBL400CTBK HBL400CTW HBL400CTR HBL400CTBL HBL400CTGN
Panel Mount Receptacle; 1/2” - 13 UNC Thread Stud Amp
Color
Cable Size
Male Receptacle
Female Receptacle
400A 400A 400A 400A 400A
Black White Red Blue Green
#4 - 4/0 #4 - 4/0 #4 - 4/0 #4 - 4/0 #4 - 4/0
HBLSITBK HBLSITW HBLSITR HBLSITBL HBLSITGN
HBLSRTBK HBLSRTW HBLSRTR HBLSRTBL HBLSRTGN
HBL400CTBK
Panel Mount Receptacle; Double Set Screw
HBLSRTBK
Amp
Color
400A 400A 400A 400A 400A
Black White Red Blue Green
Cable Size 2/0 - 4/0 2/0 - 4/0 2/0 - 4/0 2/0 - 4/0 2/0 - 4/0
Male Receptacle HBL400ITBK HBL400ITW HBL400ITR HBL400ITBL HBL400ITGN
Female Receptacle HBL400RTBK HBL400RTW HBL400RTR HBL400RTBL HBL400RTGN
Male HBLMCAPBK HBLMCAPW HBLMCAPR HBLMCAPBL HBLMCAPGN
Female HBLFCAPBK HBLFCAPW HBLFCAPR HBLFCAPBL HBLFCAPGN
Protective Caps Color Black White Red Blue Green
HBL400ITBK
Accessories Tapping “T” Connector HBLTBK
HBLMCAPBK
Distribution Block HBL7DB
HBLFCAPBK HBLTBK
F-4
TRI - TAP Connector HBL3TAP
HBL3TAP
www.hubbell-wiring.com
HBL7DB
Dimensions in Inches (mm)
Single Pole Connectors
Single Pole Connectors
Technical Specifications 300 and 400 Ampere
Specifications Electrical Voltage Rating Amperage Rating
600 Volts Maximum. 400A Maximum.
Mechanical Terminal Accommodation
Plug – 300A – #4 – 2/0 Plug – 400A – 2/0 – 4/0 Recpt. – 400A – 2/0 –
4/0 Product Identification
Ratings are a permanent part of device. Thermoset Rubber Brass Phenolic
Base Compound Contact Material Retaining Pin Material
Environmental UL Listed and CSA Certified. NEMA 3R rated. Flammability: HB or better per UL94 or CSA 22.2. 0.17 UL 498 for attachment plugs and receptacles. UL 1691 draft standard for single pin and sleeve devices intended for theatre, stage and studio applications. National Electric Code (NEC), ANSI/NFPA 70.
Ampacity Chart (Type SC/PPC Wire) Cable Size #4 #2 2/0 4/0
Ampacity* 140 190 300 405
Note: * 90 Deg. C column NEC Table 400.5(B).
Dimensional Information (in/mm) A B
B
D
B
C
A
C E
A
D
C
Panel Mount Receptacle; 1/2”-13 UNC Thread Stud
Male Plug A 6.75” (171.36)
B 2.08” (52.81)
C 1.48” (37.6)
D A B 3.20” 2.22” 2.22” (81.30) (56.36) (56.36)
C 1.50” (38.1)
D 4.36” (111.3)
E 1.48” (37.6)
Tapping Tee A 1.48” (37.6)
B 2.03” (51.56)
C 4.89” (124.14)
B B
A
D
B C
A
C E
A
C
D
Panel Mount Receptacle; Double Set Screw
Female Plug A 6.73” (170.86)
B 2.08” (52.81)
C 1.07” (27.2)
D A 3.17” 2.25” (80.48) (57.2)
Distribution Box B 4” (101.6)
Dimensions in Inches (mm)
C 1.50” (38.1)
D 4.40” (111.7)
E 1.48” (37.6)
B 8.00” (203.09)
C 1.73” (43.92)
C
A C 3.25” (82.6)
A 8.34” (211.8)
B
Specifications
A 14” (355.6)
B 2.25” (57.2)
Single Pin TRI-TAP
www.hubbell-wiring.com
F-5
Single Pole Connectors
Single Pole Connectors
Installations Instructions Male and Female Plugs
Step 1 Push cord through back end of housing and out the front side, leaving at least 6 inches of cable past the front end. Strip cord jacket 1 1/2 inches.
Step 2 Wrap solid copper wire (supplied with the product) tightly around cable jacket approximately 1/4 inch from stripped end, leaving equal lengths loose. Twist wire securely (compressing the cable jacket) with pliers 4 or 5 times around the cord.
Step 3 Join the remaining lengths of the solid copper wire together and parallel with strands of the conductor.
Step 4 Wrap copper flashing (supplied with the product) around conductor strands and solid wire so it is flush with the end of the strands.
Installation Instructions
Step 5 Slide wire bundle into contacts as far as possible and tighten the 2 set screws securely to 200 lb in. torque.
Step 6 Position contact into housing and line up hole in contact with the hole in the housing. For the male contact (pin), entrance groove is on same side as raised surface on housing. For female contact (sleeve), button is on same side as the raised surface on the housing. Press retaining pin through housing and contact until even on both sides.
Note: For Male and Female Receptacles Mount on panel with 4 screws. Mounting hole pattern is square with 1.5” centers.
F-6
www.hubbell-wiring.com
Dimensions in Inches (mm)
