SPEC SHT. SM-PSM
Job: ScrapMaster Model SM
Item No.:
ScrapMaster A Scrapping, Pre-Flushing and Disposing System with: ■ Standard Scrap Basin, Model SM ■ Pot/Pan Scrap Basin, Model PSM Recirculated Water used by the system for preflushing will reduce water and sewer cost by thousands of dollars per year. The ScrapMaster consumes only 7 gallons of new water per minute while the heavy preflushing plume recirculates at a 30 gallon rate. Scrapping Speed is more than doubled by a single operator as both hands are used for scrapping. The ScrapMasters powerful plume of water takes the place of a less productive pre-rinse spray. Problem Dishes, Trays and Cookware with dried or baked-on food need much less hand work as they can be soaking in the scrap basin while the scrapping process continues. Design Flexibility of the ScrapMaster allows the pre-flushing and scrapping of all types of soiled tableware and cookware. The standard scrap basin accepts all soiled tableware as well as school trays. The pot/pan scrap basin accommodates dishes, school trays, pots, pans and even 26 inch sheet pans. Less Splashing occurs with the ScrapMaster water plume compared to a pre-rinse spray.
TYPICAL INSTALLATIONS
Job: Item No.: Pot/Pan ScrapMaster Model PSM
Model SM
LT. TO RIGHT
RT. TO LEFT
Model PSM
ScrapMaster Model SM Model SM Legend
Model SM Drain Piping
A
Disposer outlet can be rotated at most any angle by rotating disposer. Rubber drain accepts 2” piping or 3” piping by removing drain insert.
B
Tank reservoir drain – Plumb 2” piping from valve to floor drain or connect to disposer drain piping ahead of P trap.
C
Disposer electrical connection.
D
Disposer to control connection.
E
Incoming electrical connection.
F
Hot and cold water connection. 1/2” NPT
G
Recirculating water valve.
2” tank reservoir drain can be run separately or be tied in with 2”- 3” disposer drain. ALL CONNECTIONS ARE TO BE MADE BY QUALIFIED PERSONNEL WHO WILL OBSERVE ALL LOCAL AND NATIONAL CODES.
37" (93.97)
16 1/2" (41.91)
20" (50.80)
5 5/16" (13.49)
F
11 5/8" (29.53)
19 5/8" (49.85)
9" (22.86)
TABLE CUTOUT DETAIL
23" (58.46) 37 1/8" (94.32)
A
E B
23" (58.42) 37" (93.97)
19 15/16" (50.58)
20 3/4" (52.77)
D
7
18 /16" (46.82)
23 1/4" (59.07)
E 33 3/16"(84.28) Adjustable to 36 1/8"(91.76)
29 9/16" (75.13)
F A
B G 12" (30.48)
C 14 1/4" (36.12)
F
G 5 1/8" (12.95)
NOTE: Dimensions in parenthesis are in centimeters
7 5/16" (18.57)
Pot/Pan ScrapMaster Model PSM Model PSM Legend
Model PSM Drain Piping
A
Disposer outlet can be rotated at most any angle by rotating disposer. Rubber drain accepts 2” piping or 3” piping by removing drain insert.
B
Tank reservoir drain – Plumb 2” piping from valve to floor drain or connect to disposer drain piping ahead of P trap.
C
Disposer electrical connection.
D
Disposer to control connection.
E
Incoming electrical connection.
F
Hot and cold water connection. 1/2” NPT
G
Recirculating water valve.
2” tank reservoir drain can be run separately or be tied in with 2”- 3” disposer drain. ALL CONNECTIONS ARE TO BE MADE BY QUALIFIED PERSONNEL WHO WILL OBSERVE ALL LOCAL AND NATIONAL CODES.
48" (121.91)
16 1/2" (41.91)
29" (73.66)
6 1/2" (16.51)
22" (55.88)
F
9" (22.86)
TABLE CUTOUT DETAIL
11 5/8" (29.53) 24 1/2" (62.27)
37 7/8" (96.23)
A
E B
24 1/2" (62.23) 48" (121.91)
21 7/16" (54.39)
20 3/4" (52.77)
D
7
18 /16" (46.82)
23 1/4" (59.07)
E 33 3/16"(84.28) Adjustable to 36 1/8"(91.76)
F
1
5 /8" (12.95)
A
B
F
G
29 9/16" (75.13)
G
5
12" (30.48)
7 /16" (18.57)
NOTE: Dimensions in parenthesis are in centimeters
C 1
14 /4" (36.12)
Salvajor ScrapMaster System Model SM & Model PSM S
P
E
C
I
F
CONSTRUCTION
I
C
A
T
I
O
N
S
MODELS AVAILABLE
■ 304 Stainless Steel Components ■ Salvage Basin ■ Disposer Safety Cover ■ Adjustable Legs ■ Control Panel
Model ■ 200 SM ■ 300 SM ■ 500 SM ■ 750 SM
ELECTRICAL
Model ■ 200 PSM ■ 300 PSM ■ 500 PSM ■ 750 PSM
Disposer 2 HP 3 HP 5 HP 7 1⁄ 2 HP
Lbs. 329 332 339 349
OPTIONS
■ Pre-wired NEMA 4 Panel ■ Watertight Conduit / Fittings ■ Separate Component Grounding ■ Thermally Protected Motors ■ Totally Enclosed Motors ■ Line Voltage Disconnect ■ Disposer Safety Switch ■ Operating Light ■ 24 Volt Safety Circuitry
■ Remote Start-Stop Button ■ Remote Mounting Bracket ■ Prison Package
VOLTAGES AVAILABLE ( SPECIFY EXACT OPERATING VOLTAGE )
PLUMBING ■ Corrosion Resistant Components ■ Automatic Water Blender ■ Solenoid Valves ■ Unions ■ Check Valves ■ Incoming Water Valves ■ Non-clogging Pump Design ■ Backflow Prevention Device ■ Quick Opening Drain Valve
SAMPLE SPECIFICATIONS Unit shall be a ScrapMaster (or Pot/Pan ScrapMaster) pre-flushing scrapping and food waste disposing system with recirculating water as manufactured by Salvajor. Model ____ SM (or PSM), ____Volts, ___Hz, ___Phase. Furnished with a pre-wired control panel and Stainless Steel NEMA 4X watertight enclosure.
■ 208V ■ 230V ■ 460V, 60 Cycle, 3 Phase Disposer 2 - 7 1⁄ 2 HP 208- 230-460V 3 Pump ⁄ 4 HP 208- 230-460V 1 Separator ⁄ 6 HP 208- 230-460V
FULL LOAD AMPS TOTAL FULL LOAD AMPS MODEL 208V 230V 200-SM/ PSM 10.44 9.66 300-SM/ PSM 12.64 11.66 500-SM/ PSM 17.64 16.16 750-SM/ PSM 23.64 21.66
THREE PHASE 460/480V Total HP 4.83 2.92 5.83 3.92 8.13 5.92 10.83 8.42
UTILITIES REQUIRED 208, 230 or 460 Volt, 60 cycle, 3 phase electric service, 3 ⁄4" hot and cold water supply and reduce to 1⁄ 2" at connection. 2" or 3” waste line, 2" tank reservoir drain. (Specifications subject to change without notice.)
The Salvajor Company 1- 800 - 821 - 3136 www.salvajor.com
4530 East 75th Terrace Kansas City, Missouri 64132-2081, USA (816) 363 - 1030 FAX: 1 - 800 - 832 - 9373 Email: [email protected] [email protected]
Manufacturers of Commercial Food Waste Disposing Systems since 1944
Printed in USA Form No.SM-4-BH
Item No.:
ScrapMaster A Scrapping, Pre-Flushing and Disposing System with: ■ Standard Scrap Basin, Model SM ■ Pot/Pan Scrap Basin, Model PSM Recirculated Water used by the system for preflushing will reduce water and sewer cost by thousands of dollars per year. The ScrapMaster consumes only 7 gallons of new water per minute while the heavy preflushing plume recirculates at a 30 gallon rate. Scrapping Speed is more than doubled by a single operator as both hands are used for scrapping. The ScrapMasters powerful plume of water takes the place of a less productive pre-rinse spray. Problem Dishes, Trays and Cookware with dried or baked-on food need much less hand work as they can be soaking in the scrap basin while the scrapping process continues. Design Flexibility of the ScrapMaster allows the pre-flushing and scrapping of all types of soiled tableware and cookware. The standard scrap basin accepts all soiled tableware as well as school trays. The pot/pan scrap basin accommodates dishes, school trays, pots, pans and even 26 inch sheet pans. Less Splashing occurs with the ScrapMaster water plume compared to a pre-rinse spray.
TYPICAL INSTALLATIONS
Job: Item No.: Pot/Pan ScrapMaster Model PSM
Model SM
LT. TO RIGHT
RT. TO LEFT
Model PSM
ScrapMaster Model SM Model SM Legend
Model SM Drain Piping
A
Disposer outlet can be rotated at most any angle by rotating disposer. Rubber drain accepts 2” piping or 3” piping by removing drain insert.
B
Tank reservoir drain – Plumb 2” piping from valve to floor drain or connect to disposer drain piping ahead of P trap.
C
Disposer electrical connection.
D
Disposer to control connection.
E
Incoming electrical connection.
F
Hot and cold water connection. 1/2” NPT
G
Recirculating water valve.
2” tank reservoir drain can be run separately or be tied in with 2”- 3” disposer drain. ALL CONNECTIONS ARE TO BE MADE BY QUALIFIED PERSONNEL WHO WILL OBSERVE ALL LOCAL AND NATIONAL CODES.
37" (93.97)
16 1/2" (41.91)
20" (50.80)
5 5/16" (13.49)
F
11 5/8" (29.53)
19 5/8" (49.85)
9" (22.86)
TABLE CUTOUT DETAIL
23" (58.46) 37 1/8" (94.32)
A
E B
23" (58.42) 37" (93.97)
19 15/16" (50.58)
20 3/4" (52.77)
D
7
18 /16" (46.82)
23 1/4" (59.07)
E 33 3/16"(84.28) Adjustable to 36 1/8"(91.76)
29 9/16" (75.13)
F A
B G 12" (30.48)
C 14 1/4" (36.12)
F
G 5 1/8" (12.95)
NOTE: Dimensions in parenthesis are in centimeters
7 5/16" (18.57)
Pot/Pan ScrapMaster Model PSM Model PSM Legend
Model PSM Drain Piping
A
Disposer outlet can be rotated at most any angle by rotating disposer. Rubber drain accepts 2” piping or 3” piping by removing drain insert.
B
Tank reservoir drain – Plumb 2” piping from valve to floor drain or connect to disposer drain piping ahead of P trap.
C
Disposer electrical connection.
D
Disposer to control connection.
E
Incoming electrical connection.
F
Hot and cold water connection. 1/2” NPT
G
Recirculating water valve.
2” tank reservoir drain can be run separately or be tied in with 2”- 3” disposer drain. ALL CONNECTIONS ARE TO BE MADE BY QUALIFIED PERSONNEL WHO WILL OBSERVE ALL LOCAL AND NATIONAL CODES.
48" (121.91)
16 1/2" (41.91)
29" (73.66)
6 1/2" (16.51)
22" (55.88)
F
9" (22.86)
TABLE CUTOUT DETAIL
11 5/8" (29.53) 24 1/2" (62.27)
37 7/8" (96.23)
A
E B
24 1/2" (62.23) 48" (121.91)
21 7/16" (54.39)
20 3/4" (52.77)
D
7
18 /16" (46.82)
23 1/4" (59.07)
E 33 3/16"(84.28) Adjustable to 36 1/8"(91.76)
F
1
5 /8" (12.95)
A
B
F
G
29 9/16" (75.13)
G
5
12" (30.48)
7 /16" (18.57)
NOTE: Dimensions in parenthesis are in centimeters
C 1
14 /4" (36.12)
Salvajor ScrapMaster System Model SM & Model PSM S
P
E
C
I
F
CONSTRUCTION
I
C
A
T
I
O
N
S
MODELS AVAILABLE
■ 304 Stainless Steel Components ■ Salvage Basin ■ Disposer Safety Cover ■ Adjustable Legs ■ Control Panel
Model ■ 200 SM ■ 300 SM ■ 500 SM ■ 750 SM
ELECTRICAL
Model ■ 200 PSM ■ 300 PSM ■ 500 PSM ■ 750 PSM
Disposer 2 HP 3 HP 5 HP 7 1⁄ 2 HP
Lbs. 329 332 339 349
OPTIONS
■ Pre-wired NEMA 4 Panel ■ Watertight Conduit / Fittings ■ Separate Component Grounding ■ Thermally Protected Motors ■ Totally Enclosed Motors ■ Line Voltage Disconnect ■ Disposer Safety Switch ■ Operating Light ■ 24 Volt Safety Circuitry
■ Remote Start-Stop Button ■ Remote Mounting Bracket ■ Prison Package
VOLTAGES AVAILABLE ( SPECIFY EXACT OPERATING VOLTAGE )
PLUMBING ■ Corrosion Resistant Components ■ Automatic Water Blender ■ Solenoid Valves ■ Unions ■ Check Valves ■ Incoming Water Valves ■ Non-clogging Pump Design ■ Backflow Prevention Device ■ Quick Opening Drain Valve
SAMPLE SPECIFICATIONS Unit shall be a ScrapMaster (or Pot/Pan ScrapMaster) pre-flushing scrapping and food waste disposing system with recirculating water as manufactured by Salvajor. Model ____ SM (or PSM), ____Volts, ___Hz, ___Phase. Furnished with a pre-wired control panel and Stainless Steel NEMA 4X watertight enclosure.
■ 208V ■ 230V ■ 460V, 60 Cycle, 3 Phase Disposer 2 - 7 1⁄ 2 HP 208- 230-460V 3 Pump ⁄ 4 HP 208- 230-460V 1 Separator ⁄ 6 HP 208- 230-460V
FULL LOAD AMPS TOTAL FULL LOAD AMPS MODEL 208V 230V 200-SM/ PSM 10.44 9.66 300-SM/ PSM 12.64 11.66 500-SM/ PSM 17.64 16.16 750-SM/ PSM 23.64 21.66
THREE PHASE 460/480V Total HP 4.83 2.92 5.83 3.92 8.13 5.92 10.83 8.42
UTILITIES REQUIRED 208, 230 or 460 Volt, 60 cycle, 3 phase electric service, 3 ⁄4" hot and cold water supply and reduce to 1⁄ 2" at connection. 2" or 3” waste line, 2" tank reservoir drain. (Specifications subject to change without notice.)
The Salvajor Company 1- 800 - 821 - 3136 www.salvajor.com
4530 East 75th Terrace Kansas City, Missouri 64132-2081, USA (816) 363 - 1030 FAX: 1 - 800 - 832 - 9373 Email: [email protected] [email protected]
Manufacturers of Commercial Food Waste Disposing Systems since 1944
Printed in USA Form No.SM-4-BH
