split collapsible cable drum - Morse Power
Split Collapsible Cable Drum ME-CD-SC
Uniquely designed for the power utility industry to enable easy removal of old conductor/rope from high capacity winders 652
300
754 880
50
78 652
1000
25
894
75 SQUARE
FEATURES These drums are designed to handle the issues when conductor/rope has been wound onto a drum under extreme load and it is unable to be safely removed via splitting drum. The collapsible feature allows the base diameter of the drum to collapse to release all accumulated pressure generated from layers of conductor/rope compression during winding functions. >> One removable side >> Collapseable internals activated by winding hex >> Lifting hook allowance on all ribs
>> Holes for strapping and cable tie strapping >> Multiple end drive options on same drum – double square drive (pictured), square drive and round support shaft
TECHNICAL DATA Material________________ Mild steel Diameter_______________ Outside: 1000mm Internal Collapsed: 300mm Internal Expanded: 270mm Width__________________ Outside: 754mm Internal: 652mm Maximum Spindle Dia.___ 95mm
Manufactured by MORSE
For more information contact:
W morse.com.au Australia Tim Morse M +61 4 27 624 475 New Zealand Ross Burrell M +64 2 7533 4966
Uniquely designed for the power utility industry to enable easy removal of old conductor/rope from high capacity winders 652
300
754 880
50
78 652
1000
25
894
75 SQUARE
FEATURES These drums are designed to handle the issues when conductor/rope has been wound onto a drum under extreme load and it is unable to be safely removed via splitting drum. The collapsible feature allows the base diameter of the drum to collapse to release all accumulated pressure generated from layers of conductor/rope compression during winding functions. >> One removable side >> Collapseable internals activated by winding hex >> Lifting hook allowance on all ribs
>> Holes for strapping and cable tie strapping >> Multiple end drive options on same drum – double square drive (pictured), square drive and round support shaft
TECHNICAL DATA Material________________ Mild steel Diameter_______________ Outside: 1000mm Internal Collapsed: 300mm Internal Expanded: 270mm Width__________________ Outside: 754mm Internal: 652mm Maximum Spindle Dia.___ 95mm
Manufactured by MORSE
For more information contact:
W morse.com.au Australia Tim Morse M +61 4 27 624 475 New Zealand Ross Burrell M +64 2 7533 4966
