0.6 mm Pitch, Docking Station Connectors
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
0.6 mm Pitch, Docking Station Connectors EX80 Series
■Features
Input
1. Secure electrical and mechanical connection The signal contacts wipe of 1.5 mm and built-in selfalignment assures reliable connection between plug and receptacle.
2. Sequential mating Plug design assures correct contact engagement sequence: ground-signal-power.
3. Reliable ground connection Guide tabs on the metal shell assure correct grounding sequence and high ground connection reliability with the board.
Sig Rate: 2.5Gbps Sig Level: 0.5Vp-p X=100ps/div Y=100mV/div
Output
4. High-speed data transfer Signals of 2.5 G bps can be transferred (PCI express).
5. Prevention of flux wicking Terminations of the contacts are designed to prevent a possibility of flux wicking into the contact areas.
6. Self alignment The connectors will self-align in X/Y axis within 1.2mm (0.7mm for receptacles with self-opening shutters)
7. Dedicated power supply contacts High electrical conductivity dedicated power contacts are rated 3 A.
8. High durability Bellows contact configuration assures reliable electrical and mechanical connection for 5,000 cycles (mating/un-mating).
■Applications Docking stations for notebook computers and other applications requiring high reliability, high data transfer sequential mating connections. 2008.4w
1
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or willDocking be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. EX80 Series●0.6 mm Pitch, Station Connectors
■Product specifications Ratings
Storage temperature range
-55ç to +85ç
Voltage rating
125V AC
Current rating
Characteristic 11.Contact resistance 12.Insulation resistance 13.Withstanding voltage
Signal contact
0.5A
Power contact
3A
Specification Signal contact: 70m ohms max. Power contact: 40m ohms max. 300M ohms min. No flashover or insulation breakdown.
Conditions 100mA 250V DC 350V AC/one minute
■Materials ●Receptacles Component
Material
Finish
Contacts
Copper alloy
Selective gold plated
Insulator
LCP
-----------------
Stainless steel
Nickel / tinned copper plated
Shell
●Plugs Component
Material
Finish
Copper alloy
Selective gold plated
LCP
-----------------
Stainless steel
Nickel / tinned copper plated
Contacts Insulator Shell
■Ordering information ●Receptacles
EX 80 - 54 (50) S - SH (05) 1
2
3
4
5
●Plugs
: 54(50)... 50 contacts mounted in a 54-contact size S: Receptacle connectors (Shell ground tab length 0.9 mm) P: Plug connectors (Shell ground tab length 0.9 mm) P1: Plug connectors (Shell ground tab length 2.2 mm) 5 Receptacle, with shutter SH: Built-in shutters 6 Separate specifications : See the Specifications Sheet of each products.
4 Connector types
EX 80 - 54 (50) P (01) 1
6
: EX 1 Series number 2 Model serial indicator 80 : Vertical SMT type : 54, 100 3 Number of contacts
2
3
4
6
Note: All connectors in this series are designed to be placed on the PCB 1mm min. thick.
2
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contactStation your Hirose sales representative. EX80 Series●0.6 mm Pitch, Docking Connectors
■Plugs ●100 pos. 45.3 33 30 28.2
NO.2 Power contact
16.6
NO.1 Power contact
0.6
(7)
10.9
NO.50
NO.51 Power contact
(25) NO.100
BRecommended PCB mounting pattern (PCB thickness : 1 mm min.)
17.5 Shell ground tab (4)
2Ø1 .1 +0 0
.5
(H ole
9.6 10.7
)
Part number
1.5 3.9 6.8
0.9(Through hole)
2.8(Through hole)
14.9
36.4 39 41.1 44 46 No conductive traces
14.9 39 41.1 44
3.9 9.6
11.7 7.8
le)
.45
(Ho
1.2
2.2
0.9 (Through hole) 6.8±0.05 2.8(Through hole)
+0.1 0
17.5
2-Ø1.3 +0.10 (Through hole)
15.1 4.5
41.1
R0
Ø1.7
33 (32.4) (31.5) 30 28.2 16.6±0.05 0.6±0.05 0.4±0.05
NO.52 Power contact
Removable vacuum pick-up tape
CL No.
Contact plating (contact area/termination)
Shell plating (Body / termination)
Packaging
RoHS
Gold / Tinned copper
Nickel / Tinned copper
1 piece (Tray)
YES
EX80-100P1(50) 232-0598-9-50
●54 pos. 31.5 19.2 16.2 14.4 9.7 0.6
10.9
Signal contact No.27
Signal contact No.3 Power contact No.2 Power contact No.1
27.3
(PCB thickness : 1 mm min.)
0.4 1.2
(H
ole
2-Ø 1.3 (Th rou gh ho le)
Part number
15.1 4.5 0.2 10.6 Shell ground tab (4)
2.8(Through hole) 10.6
8 22.6 25.2 27.3 30.2 32.2
CL No.
EX80-54P (01) 232-0610-2-01
8 25.2 27.3 30.2
3.9 9.6
11.7 7.8
)
1.5 3.9 6.8 9.6 10.7
0.9(Through hole)
.7
R0 .45
Ø1
0.9(Through hole) 6.8 2.8(Through hole)
19.2 16.2 14.4 9.7 0.6
0.9
BRecommended PCB mounting pattern
Power contact No.28 Power contact No.29 Signal contact No.30
Signal contact No.54 Removable vacuum pick-up tape
No conductive traces
2-Ø1.5(hole)
Contact plating (contact area/termination)
Shell plating (Body / termination)
Packaging
RoHS
Gold / Tinned copper
Nickel / Tinned copper
1 piece (Tray)
YES
Note: The design of the EX80-54P(01) does not have a detection signal contact.
3
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or willDocking be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. EX80 Series●0.6 mm Pitch, Station Connectors
■Receptacles (Without shutter) ●100 pos. 43.4 33 30 28.2 16.6 0.6
NO.52 Power contact NO.51 Power contact
8.8
(7.9) (6)
NO.100
BRecommended PCB mounting pattern
(25)
(PCB thickness : 1 mm min.) .4
5
33 (31.5) 30 28.2 16.6±0.05 0.4±0.05 0.6±0.05
+0 0 .1
(T hr ou 8-Ø1 g .85 (Lan h h d) ole
)
3.6
Ø1
NO.1 Power contact NO.2 Power contact
1.2
0.9
8-
NO.50 Removable vacuum pick-up tape
14.9 40.15 40.9 43
5.6 9.6
7.7 3.2
Shell ground tab (4)
0.6 0.8 3.2 7.7 8.6
R
)
ole
CL No.
(H
Part number
n. mi
34 34.9 40.15 40.9 43
No conductive traces
R 0.9 1. 75
.6 Ø1
14.9
Contact plating (contact area/termination)
Shell plating (Body / termination)
Gold / Tinned copper
Nickel / Tinned copper
EX80-100S(50) 232-0592-2-50 EX80-100S(51) 232-0592-2-51
Packaging 1 piece (Tray) 1,000 pieces/reel
RoHS YES
●54 pos. 29.6 25 19.2 16.2 NO.30 Signal contact NO.29 Power contact
0.6
NO.28 Power contact
6
8.8
NO.54 Signal contact
14.4 9.7
BRecommended PCB mounting pattern (PCB thickness : 1 mm min.) Ø1
.4
hr
gh
(Lan
14.4
ho
le
d)
9.7
) 0.6
1.2 0.4
5.6
7.7
.85
3.6
16.2
ou
8-Ø1
NO.3 Signal contact
Removable vacuum pick-up tape
(17.7)
(T
8 27.35
7.7 8.6
le)
Ho
27.1
0.8 0.6
( n.
21.1
mi
20.2
No conductive traces
Shell ground tab (4)
R0 .9 R1 .7 5
.6 Ø1
8
9.6
5
NO.1 Power contact NO.2 Power contact
NO.27 Signal contact
19.2
0.9
8-
27.35
4
Part number
CL No.
Contact plating (contact area/termination)
Shell plating (Body / termination)
Packaging
RoHS
EX80-54S
232-0609-3
Gold / Tinned copper
Nickel / Tinned copper
1,000 pieces/reel
YES
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contactStation your Hirose sales representative. EX80 Series●0.6 mm Pitch, Docking Connectors
■Plug ●54 pos. 31.5 19.2 16.2 14.4 9.7 0.6
10.9
Signal contact No.27
Signal contact No.3 Power contact No.2 Power contact No.1
Power contact No.28 Power contact No.29 Signal contact No.30
Signal contact No.54 27.3
BRecommended PCB mounting pattern
R0
ole
0.2 10.6
ole) rou gh h
10.6
2.8(Through hole) 2Ø1 .5 (H ol e)
8
2-Ø
1.3
(Th
22.6 25.2 27.3 30.2 32.2
Part number
8
1.5 3.9 6.8
25.2 27.3 30.2
3.9 9.6
11.7 7.8
)
Shell ground tab (4)
0.9
0.4 1.2
(H
9.6 10.7
0.9 (Through hole)
.7
.45
Ø1
0.9(Through hole) 6.8 2.8 (Through hole)
19.2 16.2 14.4 9.7 0.6
15.6 4.5
(PCB thickness : 1 mm min.)
No conductive traces
CL No.
Contact plating (contact area/termination)
Shell plating (Body / termination)
Packaging
RoHS
Gold / Tinned copper
Nickel / Tinned copper
1 piece (Tray)
YES
EX80-54(50)P(50) 232-0607-8-50
Note: The design of the EX80-54(50)P does not have a detection signal contact.
■Receptacle (With shutter) ●54 pos.
BShown without shutter
Signal contact No.27
Ø1
.4
5(
Th
ro
0.4 1.2
7.7
0.9
.9
R0
R1
.75
8
e)
ol
.(H
in
EX80-54(50)S-SH(06) 232-0606-5-06
m
EX80-54(50)S-SH(05) 232-0606-5-05
.6
CL No.
Ø1
20.2 21.1 27.35 31.2 33.6
Part number
( 1.5 )
27.35
0.2 0.8
Shell ground tab (4)
7.7
ug h ho le) 8-Ø1.85 (L and)
27.1 19.2 16.2 14.4 9.7 0.6
8
Power contact No.1 Power contact No.2 Signal contact No.3
5.6 9.6
8-
0.6
Signal contact No.30 Power contact No.29 Power contact No.28
(7.1) (0.6)
BRecommended PCB mounting pattern (PCB thickness : 1 mm min.)
31.4 19.2 16.2 14.4 9.7 0.6
8.8
18.15
5.2(Shutter height)
Signal contact No.54
No conducive traces
Contact plating (contact area/termination) Gold / Tinned copper
Shell plating (Body/termination) Shutter color Nickel / Tinned copper
Silver Black
Packaging
RoHS
500 pieces/reel
YES
5
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or willDocking be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. EX80 Series●0.6 mm Pitch, Station Connectors
■Connector mounting condition ●Type with shutters
●Type without shutters
Receptacle EX80-*S-SH
PCB
7.5
5.2 0.8
1
1
5.5
1.5 3.5 2
3.6 (4.9) 4.5
13
7.5 5.5
3.5 2 2 2 3.5
(4.9) 4.5
13
3.6
1
1
1.1
PCB
Receptacle EX80-*S
1.6
Housing mounting condition (Shown for reference only)
Housing mounting condition (Shown for reference only)
EX80-*P Plug
PCB
EX80-*P Plug
PCB
Note: The stacking length between boards of this connector is 13 mm.
BPrecautions • Make the stacking height design value of the set 13.0 to 13.7 mm. Establish the setting so that the stacking height is 14.5 mm or less including the accumulative tolerance of the set. • Use a floating structure (of 1.2 mm or less) to mount this product. (Within 0.7 mm for the type with shutters) • Be sure to also establish a guide structure on the set side. • For set designs in which the connector rotates and mates, make the radius of the rotation axis 100 mm or greater. Personal computer
m 00 m
r
eate
or gr
1
EX80-ππP
Docking station side
6
0.6 mm Pitch, Docking Station Connectors EX80 Series
■Features
Input
1. Secure electrical and mechanical connection The signal contacts wipe of 1.5 mm and built-in selfalignment assures reliable connection between plug and receptacle.
2. Sequential mating Plug design assures correct contact engagement sequence: ground-signal-power.
3. Reliable ground connection Guide tabs on the metal shell assure correct grounding sequence and high ground connection reliability with the board.
Sig Rate: 2.5Gbps Sig Level: 0.5Vp-p X=100ps/div Y=100mV/div
Output
4. High-speed data transfer Signals of 2.5 G bps can be transferred (PCI express).
5. Prevention of flux wicking Terminations of the contacts are designed to prevent a possibility of flux wicking into the contact areas.
6. Self alignment The connectors will self-align in X/Y axis within 1.2mm (0.7mm for receptacles with self-opening shutters)
7. Dedicated power supply contacts High electrical conductivity dedicated power contacts are rated 3 A.
8. High durability Bellows contact configuration assures reliable electrical and mechanical connection for 5,000 cycles (mating/un-mating).
■Applications Docking stations for notebook computers and other applications requiring high reliability, high data transfer sequential mating connections. 2008.4w
1
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or willDocking be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. EX80 Series●0.6 mm Pitch, Station Connectors
■Product specifications Ratings
Storage temperature range
-55ç to +85ç
Voltage rating
125V AC
Current rating
Characteristic 11.Contact resistance 12.Insulation resistance 13.Withstanding voltage
Signal contact
0.5A
Power contact
3A
Specification Signal contact: 70m ohms max. Power contact: 40m ohms max. 300M ohms min. No flashover or insulation breakdown.
Conditions 100mA 250V DC 350V AC/one minute
■Materials ●Receptacles Component
Material
Finish
Contacts
Copper alloy
Selective gold plated
Insulator
LCP
-----------------
Stainless steel
Nickel / tinned copper plated
Shell
●Plugs Component
Material
Finish
Copper alloy
Selective gold plated
LCP
-----------------
Stainless steel
Nickel / tinned copper plated
Contacts Insulator Shell
■Ordering information ●Receptacles
EX 80 - 54 (50) S - SH (05) 1
2
3
4
5
●Plugs
: 54(50)... 50 contacts mounted in a 54-contact size S: Receptacle connectors (Shell ground tab length 0.9 mm) P: Plug connectors (Shell ground tab length 0.9 mm) P1: Plug connectors (Shell ground tab length 2.2 mm) 5 Receptacle, with shutter SH: Built-in shutters 6 Separate specifications : See the Specifications Sheet of each products.
4 Connector types
EX 80 - 54 (50) P (01) 1
6
: EX 1 Series number 2 Model serial indicator 80 : Vertical SMT type : 54, 100 3 Number of contacts
2
3
4
6
Note: All connectors in this series are designed to be placed on the PCB 1mm min. thick.
2
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contactStation your Hirose sales representative. EX80 Series●0.6 mm Pitch, Docking Connectors
■Plugs ●100 pos. 45.3 33 30 28.2
NO.2 Power contact
16.6
NO.1 Power contact
0.6
(7)
10.9
NO.50
NO.51 Power contact
(25) NO.100
BRecommended PCB mounting pattern (PCB thickness : 1 mm min.)
17.5 Shell ground tab (4)
2Ø1 .1 +0 0
.5
(H ole
9.6 10.7
)
Part number
1.5 3.9 6.8
0.9(Through hole)
2.8(Through hole)
14.9
36.4 39 41.1 44 46 No conductive traces
14.9 39 41.1 44
3.9 9.6
11.7 7.8
le)
.45
(Ho
1.2
2.2
0.9 (Through hole) 6.8±0.05 2.8(Through hole)
+0.1 0
17.5
2-Ø1.3 +0.10 (Through hole)
15.1 4.5
41.1
R0
Ø1.7
33 (32.4) (31.5) 30 28.2 16.6±0.05 0.6±0.05 0.4±0.05
NO.52 Power contact
Removable vacuum pick-up tape
CL No.
Contact plating (contact area/termination)
Shell plating (Body / termination)
Packaging
RoHS
Gold / Tinned copper
Nickel / Tinned copper
1 piece (Tray)
YES
EX80-100P1(50) 232-0598-9-50
●54 pos. 31.5 19.2 16.2 14.4 9.7 0.6
10.9
Signal contact No.27
Signal contact No.3 Power contact No.2 Power contact No.1
27.3
(PCB thickness : 1 mm min.)
0.4 1.2
(H
ole
2-Ø 1.3 (Th rou gh ho le)
Part number
15.1 4.5 0.2 10.6 Shell ground tab (4)
2.8(Through hole) 10.6
8 22.6 25.2 27.3 30.2 32.2
CL No.
EX80-54P (01) 232-0610-2-01
8 25.2 27.3 30.2
3.9 9.6
11.7 7.8
)
1.5 3.9 6.8 9.6 10.7
0.9(Through hole)
.7
R0 .45
Ø1
0.9(Through hole) 6.8 2.8(Through hole)
19.2 16.2 14.4 9.7 0.6
0.9
BRecommended PCB mounting pattern
Power contact No.28 Power contact No.29 Signal contact No.30
Signal contact No.54 Removable vacuum pick-up tape
No conductive traces
2-Ø1.5(hole)
Contact plating (contact area/termination)
Shell plating (Body / termination)
Packaging
RoHS
Gold / Tinned copper
Nickel / Tinned copper
1 piece (Tray)
YES
Note: The design of the EX80-54P(01) does not have a detection signal contact.
3
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or willDocking be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. EX80 Series●0.6 mm Pitch, Station Connectors
■Receptacles (Without shutter) ●100 pos. 43.4 33 30 28.2 16.6 0.6
NO.52 Power contact NO.51 Power contact
8.8
(7.9) (6)
NO.100
BRecommended PCB mounting pattern
(25)
(PCB thickness : 1 mm min.) .4
5
33 (31.5) 30 28.2 16.6±0.05 0.4±0.05 0.6±0.05
+0 0 .1
(T hr ou 8-Ø1 g .85 (Lan h h d) ole
)
3.6
Ø1
NO.1 Power contact NO.2 Power contact
1.2
0.9
8-
NO.50 Removable vacuum pick-up tape
14.9 40.15 40.9 43
5.6 9.6
7.7 3.2
Shell ground tab (4)
0.6 0.8 3.2 7.7 8.6
R
)
ole
CL No.
(H
Part number
n. mi
34 34.9 40.15 40.9 43
No conductive traces
R 0.9 1. 75
.6 Ø1
14.9
Contact plating (contact area/termination)
Shell plating (Body / termination)
Gold / Tinned copper
Nickel / Tinned copper
EX80-100S(50) 232-0592-2-50 EX80-100S(51) 232-0592-2-51
Packaging 1 piece (Tray) 1,000 pieces/reel
RoHS YES
●54 pos. 29.6 25 19.2 16.2 NO.30 Signal contact NO.29 Power contact
0.6
NO.28 Power contact
6
8.8
NO.54 Signal contact
14.4 9.7
BRecommended PCB mounting pattern (PCB thickness : 1 mm min.) Ø1
.4
hr
gh
(Lan
14.4
ho
le
d)
9.7
) 0.6
1.2 0.4
5.6
7.7
.85
3.6
16.2
ou
8-Ø1
NO.3 Signal contact
Removable vacuum pick-up tape
(17.7)
(T
8 27.35
7.7 8.6
le)
Ho
27.1
0.8 0.6
( n.
21.1
mi
20.2
No conductive traces
Shell ground tab (4)
R0 .9 R1 .7 5
.6 Ø1
8
9.6
5
NO.1 Power contact NO.2 Power contact
NO.27 Signal contact
19.2
0.9
8-
27.35
4
Part number
CL No.
Contact plating (contact area/termination)
Shell plating (Body / termination)
Packaging
RoHS
EX80-54S
232-0609-3
Gold / Tinned copper
Nickel / Tinned copper
1,000 pieces/reel
YES
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contactStation your Hirose sales representative. EX80 Series●0.6 mm Pitch, Docking Connectors
■Plug ●54 pos. 31.5 19.2 16.2 14.4 9.7 0.6
10.9
Signal contact No.27
Signal contact No.3 Power contact No.2 Power contact No.1
Power contact No.28 Power contact No.29 Signal contact No.30
Signal contact No.54 27.3
BRecommended PCB mounting pattern
R0
ole
0.2 10.6
ole) rou gh h
10.6
2.8(Through hole) 2Ø1 .5 (H ol e)
8
2-Ø
1.3
(Th
22.6 25.2 27.3 30.2 32.2
Part number
8
1.5 3.9 6.8
25.2 27.3 30.2
3.9 9.6
11.7 7.8
)
Shell ground tab (4)
0.9
0.4 1.2
(H
9.6 10.7
0.9 (Through hole)
.7
.45
Ø1
0.9(Through hole) 6.8 2.8 (Through hole)
19.2 16.2 14.4 9.7 0.6
15.6 4.5
(PCB thickness : 1 mm min.)
No conductive traces
CL No.
Contact plating (contact area/termination)
Shell plating (Body / termination)
Packaging
RoHS
Gold / Tinned copper
Nickel / Tinned copper
1 piece (Tray)
YES
EX80-54(50)P(50) 232-0607-8-50
Note: The design of the EX80-54(50)P does not have a detection signal contact.
■Receptacle (With shutter) ●54 pos.
BShown without shutter
Signal contact No.27
Ø1
.4
5(
Th
ro
0.4 1.2
7.7
0.9
.9
R0
R1
.75
8
e)
ol
.(H
in
EX80-54(50)S-SH(06) 232-0606-5-06
m
EX80-54(50)S-SH(05) 232-0606-5-05
.6
CL No.
Ø1
20.2 21.1 27.35 31.2 33.6
Part number
( 1.5 )
27.35
0.2 0.8
Shell ground tab (4)
7.7
ug h ho le) 8-Ø1.85 (L and)
27.1 19.2 16.2 14.4 9.7 0.6
8
Power contact No.1 Power contact No.2 Signal contact No.3
5.6 9.6
8-
0.6
Signal contact No.30 Power contact No.29 Power contact No.28
(7.1) (0.6)
BRecommended PCB mounting pattern (PCB thickness : 1 mm min.)
31.4 19.2 16.2 14.4 9.7 0.6
8.8
18.15
5.2(Shutter height)
Signal contact No.54
No conducive traces
Contact plating (contact area/termination) Gold / Tinned copper
Shell plating (Body/termination) Shutter color Nickel / Tinned copper
Silver Black
Packaging
RoHS
500 pieces/reel
YES
5
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or willDocking be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. EX80 Series●0.6 mm Pitch, Station Connectors
■Connector mounting condition ●Type with shutters
●Type without shutters
Receptacle EX80-*S-SH
PCB
7.5
5.2 0.8
1
1
5.5
1.5 3.5 2
3.6 (4.9) 4.5
13
7.5 5.5
3.5 2 2 2 3.5
(4.9) 4.5
13
3.6
1
1
1.1
PCB
Receptacle EX80-*S
1.6
Housing mounting condition (Shown for reference only)
Housing mounting condition (Shown for reference only)
EX80-*P Plug
PCB
EX80-*P Plug
PCB
Note: The stacking length between boards of this connector is 13 mm.
BPrecautions • Make the stacking height design value of the set 13.0 to 13.7 mm. Establish the setting so that the stacking height is 14.5 mm or less including the accumulative tolerance of the set. • Use a floating structure (of 1.2 mm or less) to mount this product. (Within 0.7 mm for the type with shutters) • Be sure to also establish a guide structure on the set side. • For set designs in which the connector rotates and mates, make the radius of the rotation axis 100 mm or greater. Personal computer
m 00 m
r
eate
or gr
1
EX80-ππP
Docking station side
6
