090615 D7095 instructions page 1.ai
D7095 Adjustable friction restraining stay
Serie 1090
The position of headplate and channel in relation to the axis of the butt hinge will determine the limitation of opening. The opening angles may vary slightly depending on the hinge specified and thickness of door. Note: Place the spring buffer in the channel nearest to the hanging edge with the friction adjustment block away from the arm allowing access to the adjustment screws when the door is open.
STRAND HARDWARE LIMITED THE BEST WAY OUT...
headplate A
end-cap arm
Fixing dimensions A: dimension in mm from hinge axis to centre of headplate B: dimension in mm from hinge axis to hole in end-cap
B spring buffer
Opening
A
B
100 º 90 º
195 199
90 115
end-cap
friction adjustment screws friction adjustment block
IMPORTANT Friction adjustment block - please ensure the friction is adjusted to suit the size and weight of the door.
199
IMPORTANT Headplate - please ensure the headplate is fixed 3mm back from the edge of door stop. By increasing this to 5mm will decrease the full opening angle by a few degrees.
3.0
115
90 º max opening of door
All dimensions in mm
195
3.0
90
100 º max opening of door
Drawings not to scale
D7095 Inst 120218
Preparation for extrusion and headplate to door and frame
Serie 1090
Door
Frame
A (see over) B (see over)
499mm Head
11.0
Surface mount 485mm extrusion onto door face allowing clearance of at least 11.0 mm
Drawings not to scale Frame
Door
All dimensions in mm Head
Head see chart overleaf for dimensions A & B A
11.0
11.0
B
Aluminium Channel Door Timber Door
D7095-01 495mm Adjustable Friction Stay
The Aluminium channel is suitable for doors between 640 - 900mm. For doors of 625mm the channel can be cut down by approx 25mm only Recommended fixing screws for Timber :
Head bracket - 8g Csk 4.0mm x 30mm End-cap - 10g Csk 5.0mm x 40mm
Application: Suitable for use with Timber, Steel and Aluminium windows or light doors Description: Allows opening between 90 º - 100 º depending on positioning of head plate and extrusion.
Material: Aluminium extruded channel with steel arm and headplate Nylon friction block with adjustment screws Stainless buffer spring
Timber Doors It may be necessary to adjust dimensions A & B depending on type of hinge used and thickness of doors Steel or Aluminium Doors Alternative fixings may be required for Steel or Aluminium doors In addition the dimensions A & B may need to be adjusted slightly depending on type of hinge used and thickness of doors IMPORTANT Friction adjustment block - please ensure the friction is adjusted to suit the size and weight of the door. The two screws should be adjusted to hold the door at any required angle. D7095 Inst 120218
Serie 1090
The position of headplate and channel in relation to the axis of the butt hinge will determine the limitation of opening. The opening angles may vary slightly depending on the hinge specified and thickness of door. Note: Place the spring buffer in the channel nearest to the hanging edge with the friction adjustment block away from the arm allowing access to the adjustment screws when the door is open.
STRAND HARDWARE LIMITED THE BEST WAY OUT...
headplate A
end-cap arm
Fixing dimensions A: dimension in mm from hinge axis to centre of headplate B: dimension in mm from hinge axis to hole in end-cap
B spring buffer
Opening
A
B
100 º 90 º
195 199
90 115
end-cap
friction adjustment screws friction adjustment block
IMPORTANT Friction adjustment block - please ensure the friction is adjusted to suit the size and weight of the door.
199
IMPORTANT Headplate - please ensure the headplate is fixed 3mm back from the edge of door stop. By increasing this to 5mm will decrease the full opening angle by a few degrees.
3.0
115
90 º max opening of door
All dimensions in mm
195
3.0
90
100 º max opening of door
Drawings not to scale
D7095 Inst 120218
Preparation for extrusion and headplate to door and frame
Serie 1090
Door
Frame
A (see over) B (see over)
499mm Head
11.0
Surface mount 485mm extrusion onto door face allowing clearance of at least 11.0 mm
Drawings not to scale Frame
Door
All dimensions in mm Head
Head see chart overleaf for dimensions A & B A
11.0
11.0
B
Aluminium Channel Door Timber Door
D7095-01 495mm Adjustable Friction Stay
The Aluminium channel is suitable for doors between 640 - 900mm. For doors of 625mm the channel can be cut down by approx 25mm only Recommended fixing screws for Timber :
Head bracket - 8g Csk 4.0mm x 30mm End-cap - 10g Csk 5.0mm x 40mm
Application: Suitable for use with Timber, Steel and Aluminium windows or light doors Description: Allows opening between 90 º - 100 º depending on positioning of head plate and extrusion.
Material: Aluminium extruded channel with steel arm and headplate Nylon friction block with adjustment screws Stainless buffer spring
Timber Doors It may be necessary to adjust dimensions A & B depending on type of hinge used and thickness of doors Steel or Aluminium Doors Alternative fixings may be required for Steel or Aluminium doors In addition the dimensions A & B may need to be adjusted slightly depending on type of hinge used and thickness of doors IMPORTANT Friction adjustment block - please ensure the friction is adjusted to suit the size and weight of the door. The two screws should be adjusted to hold the door at any required angle. D7095 Inst 120218
