1 H.P. Model 100
1 H.P. Model 100 JOB:
Item No.:
FOOD WASTE DISPOSER SPECIFICATIONS CORROSION RESISTANT BODY Permanent molded from heat treated aluminum alloy.
TEFLON LIP WATER SEAL Protects the motor from damage by water.
TAPERED ROLLER BEARING Provides longer motor life, quiet operation and shock absorbing.
WATER COOLED MOTOR Provides maximum efficiency and longer life.
QUIET OPERATION Extra thick rubber mounting adaptor and drain outlet isolates sound and eliminates vibration.
Cone Assembly TABLE CUT-OUT: 12” CONE - 12 7/8” 15” CONE - 15 7/8” 18” CONE - 18 7/8”
ALL PIPING 1/2" OPTIONAL CONE COVER
VACUUM BREAKER
SOLENOID VALVE W/ WATER FLOW CONTROL
1 2
/ " FIXED NOZZLE
NEMA 4 Watertight Controls SCRAP RING
DISPOSER CONTROL
FOOD WASTE DISPOSER
2" DRAIN
MSS
MRSS
NOTE: INSTALL PER ALL APPLICABLE CODES
FULL LOAD AMPS
ARSS-2
ARSS
Optional Line Disconnect (LD) available on MSS, MRSS, & ARSS
■ ■ ■ ■ ■ ■
115 Volts
1 Phase
18.6 Amps
208 Volts
1 Phase
10.2 Amps
230 Volts
1 Phase
9.3 Amps
208 Volts
3 Phase
4.9 Amps
230 Volts
3 Phase
4.5 Amps
460 Volts
3 Phase
2.3 Amps
◆ SPECIFY EXACT OPERATING VOLTAGE ◆
Salvajor Model 100 Food Waste Disposer 1 HP – 1 Phase & 3 Phase D
E
T
A
I
L
S
A
N
D
D
I
M
E
N
S
I
O
N
S
SPECIFICATIONS: 18" CONE
15" CONE
/2" FIXED NOZZLE
20 7/8" (53.02)
177/8" (45.40) 15" (38.10)
55/8" (14.29)
61/2" (16.51)
1 /2" NPT WATER INLET 81/2" (21.59)
13" (33.02)
MOUNTING – Rubber adaptor above grind chamber and rubber drain outlet isolates sound and eliminates vibration. No metal to metal contact.
EXTERIOR HOUSING – Permanent molded from heat treated, corrosion resistant aluminum alloy then computer machined to a smooth polished finish. Paint free.
SHREDDER – 8 inch diameter, machined high strength,
1
21 7/16" (54.45)
wear resistant hardened carbide alloy.
ROTOR – 8 inch diameter with 2 cutter bars, machined high strength, wear resistant hardened carbide alloy.
18" (45.72)
81/2" (21.59)
2" DRAIN
61/2" (16.51)
141/8" (35.92) 55/8" (14.29)
12" CONE POWER ENTRANCE
147/8" (37.78) 12" (30.48)
RESET BUTTON
61/2" (16.51)
MOTOR – 1 HP totally enclosed. Water cooled for efficiency and longer life. Built-in manual reset thermal overload protection. Available in 208 volts or 115/ 230 volts, 60 cycle, 1 phase and 208-230/460 volts, 60 cycle, 3 phase.
31/2" SINK MOUNT 31/2" (8.89) SINK OPENING
SEAL – Teflon Lip Water Seal. WATER REQUIREMENT – 5 gallons of cold water per minute.
WASTE OUTLET – Rubber drain accepts 2” piping.
1 /2" NPT WATER INLET 81/2" (21.59)
1 5 13/16" (40.16)
/4" (1.91)
81/2" (21.59)
2" DRAIN
DUAL DIRECTION GRINDING – Designed to
ASSEMBLIES: (See Specification Sheet) CA – Cone Assembly with 12”, 15” or 18” Cone SA – Sink Assembly with 3 1⁄2” or 6 1⁄2” Sink Collar
MSS: (Non Reversing) MRSS: (Manual Reversing) ARSS-2: (Automatic Reversing) ARSS: (Automatic Reversing)
91/4" (23.50)
ADJUSTABLE LEG (OPTIONAL)
POWER ENTRANCE
10 9/16"(26.78) to 14 3/16"(35.99)
NOTE: Dimensions in parenthesis are in centimeters (Specifications subject to change without notice) Current specification details may be found online at www.salvajor.com
SAMPLE SPECIFICATION 100- CA-18
DISPOSER CONTROLS: (See Specification Sheet)
55/8" (14.29)
RESET BUTTON
operate in either direction. Direction of rotation can be controlled when installed with automatic reversing controls. Reversing rotation can double cutting teeth life.
LEG SUPPORT (Optional) – Single leg, adjustable.
65/8" (16.83) CUTOUT
3
13" (33.02)
55/8" (14.29)
61/2" SINK MOUNT
BEARINGS – Tapered roller (top) Sealed ball (bottom)
55/8" (14.29)
Model
Cone Size Assembly
MSS Disposer Control
( 230/60/3 ) Electrical Specs.
◆ SPECIFY EXACT OPERATING VOLTAGE ◆
The Salvajor Company 1- 800 - SALVAJOR www.salvajor.com
4530 East 75th Terrace Kansas City, Missouri 64132-2081, USA (816) 363 - 1030 FAX: 1 - 800 - 832 - 9373 Email: [email protected] [email protected]
Manufacturers of Commercial Food Waste Disposing Systems since 1944
Printed in USA Form No.S100-9-BH
Salvajor SA: Sink Assembly
FOR DISPOSER MODELS : 75 - 100 - 150 - 200 - 300 - 500 - 750
EQUIPMENT FURNISHED:
6 1⁄ 2" ASSEMBLY
3 1⁄ 2" ASSEMBLY
A DISPOSER
B 3 1⁄ 2” or 6 1⁄ 2” SINK MOUNT
C FIXED NOZZLE, 1⁄ 2" D VACUUM BREAKER
E SOLENOID VALVE, 1⁄ 2" F FLOW CONTROL
G DISPOSER CONTROL
1 RUBBER STOPPER 2 STAINLESS-STEEL
SAMPLE SPECIFICATION
200 - SA - 6 ⁄2" 1
MSS ( 208/60/3)
Model
Sink Electrical Adaptor Specs. Size Disposer Assembly Control
◆ SPECIFY EXACT OPERATING VOLTAGE ◆ (Specifications subject to change without notice) Current specification details may be found online at www.salvajor.com
Models 75-200
Leg Optional
SINK ADAPTOR GASKET
METAL WASHER SINK COLLAR
SNAP RING RETAINER
Sink Mount Assembly
Models 300-750
Short Top Housing
Standard Housing
2” Drain
3 4 5 6
2” or 3” Drain Leg Included
NOTE : INSTALL PER ALL APPLICABLE CODES
Salvajor SA: Sink Assembly D
E
T
A
I
L
S
A
N
D
D
I
M
E
N
S
I
O
N
S
FOR MODELS : 75 - 100 - 150 - 200 - 300 - 500 - 750
61⁄2” SINK MOUNT
3 1⁄2” SINK MOUNT 31/2" (8.89) SINK OPENING
65/8" (16.83) CUTOUT
3
/4" (1.91)
3
/16" (0.48)
1
/2" NPT WATER INLET
D F
A
13" (33.02)
B
81/2" (21.59)
G
POWER ENTRANCE
E
H
C
I
RESET BUTTON
Adjustable leg optional on Models 75-200
NOTE: Dimensions in parenthesis are in centimeters. Models 300-750 shown, Short Top & 75-200 similar.
Dimensions A
B
C
D
E
F
G
H
I
Models 75 - 200
5-5/8” (14.29)
9-1/4” (23.50)
27-1/8” to 30-3/4” (68.90 to 78.11)
8-1/2” (21.59)
7-5/16” (18.57)
15-13/16” (40.16)
2” Drain
8-11/16” (20.07)
26-9/16” to 30-3/16” (67.47 to 76.68)
Models 300 - 750
5-5/8” (14.29)
14-9/16” (36.99)
27-1/8” to 30-3/4” (68.90 to 78.11)
13-13/16” (35.08)
6-5/16” (16.03)
20-1/8” (51.12)
2” or 3” Drain
14” (35.56)
26-9/16” to 30-3/16” (67.47 to 76.68)
300 - 750 Short Top
2-9/16” (6.51)
11-1/2” (29.21)
24-1/16” to 27-11/16” (61.12 to 70.33)
10-3/4” (27.31)
6-5/16” (16.03)
17-1/16” (43.34)
2” or 3” Drain
10-15/16” (27.78)
23-1/2” to 27-1/8” (59.69 to 68.90)
Models 75-200
Deep Sink
Models 300-750
Deep Sink
The Salvajor Company 1- 800 - SALVAJOR www.salvajor.com
4530 East 75th Terrace Kansas City, Missouri 64132-2081, USA (816) 363 - 1030 FAX: 1 - 800 - 832 - 9373 Email: [email protected] [email protected]
Manufacturers of Commercial Food Waste Disposing Systems since 1944
Printed in USA Form No.SA-09-BH
Salvajor Model MSS & MSS-LD MANUAL START/STOP PRE-WIRED CONTROL PANEL FOR MODELS: 75 - 100 - 150 - 200 - 300 - 500 - 750
SPECIFICATIONS: ■ NEMA 4 Stainless Steel Corrosion-Resistant Enclosure ■ Magnetic Contactor ■ Start/Stop Push Buttons ■ Terminal Strip Connections OPTIONAL: ■ Line Disconnect (LD)
MSS-LD
MSS
VOLTAGES AVAILABLE : 1-PHASE 115 VOLT, 208 - 230 VOLT 3-PHASE 208 - 230 VOLT, 460 VOLT* * When over 250 volts, we recommend using Model ARSS-2 or ARSS with 24 Volt Control Transformer. ◆ SPECIFY EXACT OPERATING VOLTAGE ◆
ACCESSORIES AVAILABLE :
MODEL MSS & MSS-LD DISPOSER CONTROL
is for use with Salvajor Models: 75 - 100 - 150 - 200 300 - 500 - 750 WEIGHT: 8 LBS.
■ #980104 Mounting Bracket for MSS & MSS-LD (Specifications subject to change without notice)
SAFETY FEATURE: The MSS & MSS-LD controls include an operator safety feature that prevents automatic starting of the disposer after a power interruption. To re-start the disposer, the operator must push the START button.
7 5/16" (18.54) 313/16" (9.68)
6 3/ 8" (16.11) 5 7/ 8" (14.86) 5" (12.62)
9 3/8" (23.83) 9 7 /8 " (25.08)
NOTE: Dimensions in parenthesis are in centimeters
10 1/2" (26.67)
Typical Installation Diagram of Salvajor Model MSS & MSS-LD Control Panel with Disposer Vacuum Breaker
Optional: Cold Water Supply Valve
Solenoid Valve with Flow Control
Cone or Sink Cold Water Supply Line
MSS or
MSS-LD Control Panel
Control Panel may be mounted on wall or under table top with optional bracket. Motor has overload protection.
# 980104 MSS & MSS-LD Mounting Bracket
5 /8" (1.59)
5" (12.70) SLOTS 3 /8" x 1" (.95 x 2.54)
NOTE : INSTALL PER ALL APPLICABLE CODES
5" (12.70)
Item Numbers for Ordering CONTROL MODEL
VOLTAGE
PHASE
MSS
115 208 or 230 208 or 230 460*
1 1 3 3
MSS MSS MSS MSS
MSS-LD
115 208 or 230 208 or 230 460*
1 1 3 3
MSSLD MSSLD MSSLD MSSLD
8" 9 7/8" 11" (20.32) (25.08) (27.94) 4" (10.16)
2 3/4" (6.99)
Electrical Supply
NOTE: Dimensions in parenthesis are in centimeters
ITEM NO.
4 5 7 9 4 5 7 9
◆ SPECIFY EXACT OPERATING VOLTAGE ◆
*When over 250 volts, we recommend using Model ARSS-2 or ARSS with 24 Volt Control Transformer.
The Salvajor Company 1- 800 - SALVAJOR www.salvajor.com
4530 East 75th Terrace Kansas City, Missouri 64132-2081, USA (816) 363 - 1030 FAX: 1 - 800 - 832 - 9373 Email: [email protected] [email protected]
Manufacturers of Commercial Food Waste Disposing Systems since 1944
Printed in USA Form No. MSS/MSS-LD-6-BH
Item No.:
FOOD WASTE DISPOSER SPECIFICATIONS CORROSION RESISTANT BODY Permanent molded from heat treated aluminum alloy.
TEFLON LIP WATER SEAL Protects the motor from damage by water.
TAPERED ROLLER BEARING Provides longer motor life, quiet operation and shock absorbing.
WATER COOLED MOTOR Provides maximum efficiency and longer life.
QUIET OPERATION Extra thick rubber mounting adaptor and drain outlet isolates sound and eliminates vibration.
Cone Assembly TABLE CUT-OUT: 12” CONE - 12 7/8” 15” CONE - 15 7/8” 18” CONE - 18 7/8”
ALL PIPING 1/2" OPTIONAL CONE COVER
VACUUM BREAKER
SOLENOID VALVE W/ WATER FLOW CONTROL
1 2
/ " FIXED NOZZLE
NEMA 4 Watertight Controls SCRAP RING
DISPOSER CONTROL
FOOD WASTE DISPOSER
2" DRAIN
MSS
MRSS
NOTE: INSTALL PER ALL APPLICABLE CODES
FULL LOAD AMPS
ARSS-2
ARSS
Optional Line Disconnect (LD) available on MSS, MRSS, & ARSS
■ ■ ■ ■ ■ ■
115 Volts
1 Phase
18.6 Amps
208 Volts
1 Phase
10.2 Amps
230 Volts
1 Phase
9.3 Amps
208 Volts
3 Phase
4.9 Amps
230 Volts
3 Phase
4.5 Amps
460 Volts
3 Phase
2.3 Amps
◆ SPECIFY EXACT OPERATING VOLTAGE ◆
Salvajor Model 100 Food Waste Disposer 1 HP – 1 Phase & 3 Phase D
E
T
A
I
L
S
A
N
D
D
I
M
E
N
S
I
O
N
S
SPECIFICATIONS: 18" CONE
15" CONE
/2" FIXED NOZZLE
20 7/8" (53.02)
177/8" (45.40) 15" (38.10)
55/8" (14.29)
61/2" (16.51)
1 /2" NPT WATER INLET 81/2" (21.59)
13" (33.02)
MOUNTING – Rubber adaptor above grind chamber and rubber drain outlet isolates sound and eliminates vibration. No metal to metal contact.
EXTERIOR HOUSING – Permanent molded from heat treated, corrosion resistant aluminum alloy then computer machined to a smooth polished finish. Paint free.
SHREDDER – 8 inch diameter, machined high strength,
1
21 7/16" (54.45)
wear resistant hardened carbide alloy.
ROTOR – 8 inch diameter with 2 cutter bars, machined high strength, wear resistant hardened carbide alloy.
18" (45.72)
81/2" (21.59)
2" DRAIN
61/2" (16.51)
141/8" (35.92) 55/8" (14.29)
12" CONE POWER ENTRANCE
147/8" (37.78) 12" (30.48)
RESET BUTTON
61/2" (16.51)
MOTOR – 1 HP totally enclosed. Water cooled for efficiency and longer life. Built-in manual reset thermal overload protection. Available in 208 volts or 115/ 230 volts, 60 cycle, 1 phase and 208-230/460 volts, 60 cycle, 3 phase.
31/2" SINK MOUNT 31/2" (8.89) SINK OPENING
SEAL – Teflon Lip Water Seal. WATER REQUIREMENT – 5 gallons of cold water per minute.
WASTE OUTLET – Rubber drain accepts 2” piping.
1 /2" NPT WATER INLET 81/2" (21.59)
1 5 13/16" (40.16)
/4" (1.91)
81/2" (21.59)
2" DRAIN
DUAL DIRECTION GRINDING – Designed to
ASSEMBLIES: (See Specification Sheet) CA – Cone Assembly with 12”, 15” or 18” Cone SA – Sink Assembly with 3 1⁄2” or 6 1⁄2” Sink Collar
MSS: (Non Reversing) MRSS: (Manual Reversing) ARSS-2: (Automatic Reversing) ARSS: (Automatic Reversing)
91/4" (23.50)
ADJUSTABLE LEG (OPTIONAL)
POWER ENTRANCE
10 9/16"(26.78) to 14 3/16"(35.99)
NOTE: Dimensions in parenthesis are in centimeters (Specifications subject to change without notice) Current specification details may be found online at www.salvajor.com
SAMPLE SPECIFICATION 100- CA-18
DISPOSER CONTROLS: (See Specification Sheet)
55/8" (14.29)
RESET BUTTON
operate in either direction. Direction of rotation can be controlled when installed with automatic reversing controls. Reversing rotation can double cutting teeth life.
LEG SUPPORT (Optional) – Single leg, adjustable.
65/8" (16.83) CUTOUT
3
13" (33.02)
55/8" (14.29)
61/2" SINK MOUNT
BEARINGS – Tapered roller (top) Sealed ball (bottom)
55/8" (14.29)
Model
Cone Size Assembly
MSS Disposer Control
( 230/60/3 ) Electrical Specs.
◆ SPECIFY EXACT OPERATING VOLTAGE ◆
The Salvajor Company 1- 800 - SALVAJOR www.salvajor.com
4530 East 75th Terrace Kansas City, Missouri 64132-2081, USA (816) 363 - 1030 FAX: 1 - 800 - 832 - 9373 Email: [email protected] [email protected]
Manufacturers of Commercial Food Waste Disposing Systems since 1944
Printed in USA Form No.S100-9-BH
Salvajor SA: Sink Assembly
FOR DISPOSER MODELS : 75 - 100 - 150 - 200 - 300 - 500 - 750
EQUIPMENT FURNISHED:
6 1⁄ 2" ASSEMBLY
3 1⁄ 2" ASSEMBLY
A DISPOSER
B 3 1⁄ 2” or 6 1⁄ 2” SINK MOUNT
C FIXED NOZZLE, 1⁄ 2" D VACUUM BREAKER
E SOLENOID VALVE, 1⁄ 2" F FLOW CONTROL
G DISPOSER CONTROL
1 RUBBER STOPPER 2 STAINLESS-STEEL
SAMPLE SPECIFICATION
200 - SA - 6 ⁄2" 1
MSS ( 208/60/3)
Model
Sink Electrical Adaptor Specs. Size Disposer Assembly Control
◆ SPECIFY EXACT OPERATING VOLTAGE ◆ (Specifications subject to change without notice) Current specification details may be found online at www.salvajor.com
Models 75-200
Leg Optional
SINK ADAPTOR GASKET
METAL WASHER SINK COLLAR
SNAP RING RETAINER
Sink Mount Assembly
Models 300-750
Short Top Housing
Standard Housing
2” Drain
3 4 5 6
2” or 3” Drain Leg Included
NOTE : INSTALL PER ALL APPLICABLE CODES
Salvajor SA: Sink Assembly D
E
T
A
I
L
S
A
N
D
D
I
M
E
N
S
I
O
N
S
FOR MODELS : 75 - 100 - 150 - 200 - 300 - 500 - 750
61⁄2” SINK MOUNT
3 1⁄2” SINK MOUNT 31/2" (8.89) SINK OPENING
65/8" (16.83) CUTOUT
3
/4" (1.91)
3
/16" (0.48)
1
/2" NPT WATER INLET
D F
A
13" (33.02)
B
81/2" (21.59)
G
POWER ENTRANCE
E
H
C
I
RESET BUTTON
Adjustable leg optional on Models 75-200
NOTE: Dimensions in parenthesis are in centimeters. Models 300-750 shown, Short Top & 75-200 similar.
Dimensions A
B
C
D
E
F
G
H
I
Models 75 - 200
5-5/8” (14.29)
9-1/4” (23.50)
27-1/8” to 30-3/4” (68.90 to 78.11)
8-1/2” (21.59)
7-5/16” (18.57)
15-13/16” (40.16)
2” Drain
8-11/16” (20.07)
26-9/16” to 30-3/16” (67.47 to 76.68)
Models 300 - 750
5-5/8” (14.29)
14-9/16” (36.99)
27-1/8” to 30-3/4” (68.90 to 78.11)
13-13/16” (35.08)
6-5/16” (16.03)
20-1/8” (51.12)
2” or 3” Drain
14” (35.56)
26-9/16” to 30-3/16” (67.47 to 76.68)
300 - 750 Short Top
2-9/16” (6.51)
11-1/2” (29.21)
24-1/16” to 27-11/16” (61.12 to 70.33)
10-3/4” (27.31)
6-5/16” (16.03)
17-1/16” (43.34)
2” or 3” Drain
10-15/16” (27.78)
23-1/2” to 27-1/8” (59.69 to 68.90)
Models 75-200
Deep Sink
Models 300-750
Deep Sink
The Salvajor Company 1- 800 - SALVAJOR www.salvajor.com
4530 East 75th Terrace Kansas City, Missouri 64132-2081, USA (816) 363 - 1030 FAX: 1 - 800 - 832 - 9373 Email: [email protected] [email protected]
Manufacturers of Commercial Food Waste Disposing Systems since 1944
Printed in USA Form No.SA-09-BH
Salvajor Model MSS & MSS-LD MANUAL START/STOP PRE-WIRED CONTROL PANEL FOR MODELS: 75 - 100 - 150 - 200 - 300 - 500 - 750
SPECIFICATIONS: ■ NEMA 4 Stainless Steel Corrosion-Resistant Enclosure ■ Magnetic Contactor ■ Start/Stop Push Buttons ■ Terminal Strip Connections OPTIONAL: ■ Line Disconnect (LD)
MSS-LD
MSS
VOLTAGES AVAILABLE : 1-PHASE 115 VOLT, 208 - 230 VOLT 3-PHASE 208 - 230 VOLT, 460 VOLT* * When over 250 volts, we recommend using Model ARSS-2 or ARSS with 24 Volt Control Transformer. ◆ SPECIFY EXACT OPERATING VOLTAGE ◆
ACCESSORIES AVAILABLE :
MODEL MSS & MSS-LD DISPOSER CONTROL
is for use with Salvajor Models: 75 - 100 - 150 - 200 300 - 500 - 750 WEIGHT: 8 LBS.
■ #980104 Mounting Bracket for MSS & MSS-LD (Specifications subject to change without notice)
SAFETY FEATURE: The MSS & MSS-LD controls include an operator safety feature that prevents automatic starting of the disposer after a power interruption. To re-start the disposer, the operator must push the START button.
7 5/16" (18.54) 313/16" (9.68)
6 3/ 8" (16.11) 5 7/ 8" (14.86) 5" (12.62)
9 3/8" (23.83) 9 7 /8 " (25.08)
NOTE: Dimensions in parenthesis are in centimeters
10 1/2" (26.67)
Typical Installation Diagram of Salvajor Model MSS & MSS-LD Control Panel with Disposer Vacuum Breaker
Optional: Cold Water Supply Valve
Solenoid Valve with Flow Control
Cone or Sink Cold Water Supply Line
MSS or
MSS-LD Control Panel
Control Panel may be mounted on wall or under table top with optional bracket. Motor has overload protection.
# 980104 MSS & MSS-LD Mounting Bracket
5 /8" (1.59)
5" (12.70) SLOTS 3 /8" x 1" (.95 x 2.54)
NOTE : INSTALL PER ALL APPLICABLE CODES
5" (12.70)
Item Numbers for Ordering CONTROL MODEL
VOLTAGE
PHASE
MSS
115 208 or 230 208 or 230 460*
1 1 3 3
MSS MSS MSS MSS
MSS-LD
115 208 or 230 208 or 230 460*
1 1 3 3
MSSLD MSSLD MSSLD MSSLD
8" 9 7/8" 11" (20.32) (25.08) (27.94) 4" (10.16)
2 3/4" (6.99)
Electrical Supply
NOTE: Dimensions in parenthesis are in centimeters
ITEM NO.
4 5 7 9 4 5 7 9
◆ SPECIFY EXACT OPERATING VOLTAGE ◆
*When over 250 volts, we recommend using Model ARSS-2 or ARSS with 24 Volt Control Transformer.
The Salvajor Company 1- 800 - SALVAJOR www.salvajor.com
4530 East 75th Terrace Kansas City, Missouri 64132-2081, USA (816) 363 - 1030 FAX: 1 - 800 - 832 - 9373 Email: [email protected] [email protected]
Manufacturers of Commercial Food Waste Disposing Systems since 1944
Printed in USA Form No. MSS/MSS-LD-6-BH
