1000BASE-T Copper SFP Transceiver
Datasheet
10GbE SFP+ Direct Attach Passive Copper Cable 1M AWG24 10GSFP-PC-24-1-xx
Features
Supports 1Gb/s to 10.5Gb/s bit rates
Support 1x, 2x, 4x and 8x Fiber Channel data rates
Hot-pluggable SFP 20PIN footprint
AC coupling of PECL signals
Improved Pluggable Form Factor (IPF) compliant for enhanced EMI/EMC Performance
Lower Power Consumption< 0.5W
Power Supply: +3.3V
Compatible to SFP+ MSA
Temperature Range: 0~ 70°C
RoHS6 Compliant
Applications
Storage Area Networks (SAN), Network Attached Storage and Storage Servers
1G/2G/4G/8G Fiber Channel
Switched fabric I/O
Data center cabling infrastructure
Hubs, switches, routers, servers, NICs
Description 10GSFP-PC-24-1-xx Copper SFP+ Cable assemblies are high-performance, cost effective I/O solutions for 10 GB Ethernet and 10G Fiber Channel applications. SFP+ copper modules allow hardware manufacturers to achieve high port density, configurability and utilization at a very low cost and to reduce power budget. The high-speed cable assemblies meet and exceed the performance and reliability requirements stipulated by Gigabit Ethernet and Fiber Channel industry standard.
1
Datasheet
Specifications Table 1 - Absolute Maximum Ratings Parameter
Symbol
Min
Maximum Supply Voltage
Vcc
Storage Temperature
Ts
Typ
Max
Units
-0.5
4.0
V
-40
85
°C
Table 2 - Normal operating condition Parameter
Symbol
Min
Operating Case Temperature
Top
0
Supply Voltage
Vcc
3.14
Power Consumption
P
Data Rate
1
Typ
3.3
Max
Unit
70
°C
3.47
V
0.5
W
10.5
Gbps
Table 3 - Regulatory Compliance Feature
Standard MIL-STD-883G
Electrostatic Discharge (ESD) to the Electrical Pins
Method 3015.7
Performance Class 1C (>1000 V)
EN 55024:1998+A1+A2 Electrostatic Discharge to the enclosure
IEC-61000-4-2
Compatible with standards
GR-1089-CORE Compatible with standards Noise frequency range: FCC Part 15 Class B
30MHz to 6GHz. Good system
EN55022:2006
EMI design practice required
CISPR 22B :2006
to achieve Class B margins.
VCCI Class B
System margins are dependent on
Electromagnetic Interference (EMI)
customer host board and chassis design. Compatible with standards. 1KHz sine-wave, 80% AM, Immunity
EN 55024:1998+A1+A2
from 80MHz to 1GHz. No
IEC 61000-4-3
effect on transmitter/receiver performance is detectable between these limits.
FDA 21CFR 1040.10 and Laser Eye Safety
1040.11 EN (IEC) 60825-1:2007 EN (IEC) 60825-2:2004+A1 2
CDRH compliant and Class I laser product. TüV Certificate No. 50135086
Datasheet UL file E317337
UL and CUL
Component Recognition
TüV Certificate No. 50135086 (CB
EN60950-1:2006
scheme )
2002/95/EC 4.1&4.2
RoHS6
Compliant with standards*note1
2005/747/EC 5&7&13
Notes: Note1: For update of the equipments and strict control of raw materials, Fiberstore has the ability to supply the customized products since Jan 1th, 2007, which meet the requirements of RoHS6 (Restrictions on use of certain Hazardous Substances) of European Union. In light of item 5 in RoHS exemption list of RoHS Directive 2002/95/EC, Item 5: Lead in glass of cathode ray tubes, electronic components and fluorescent tubes. In light of item 13 in RoHS exemption list of RoHS Directive 2005/747/EC, Item13: Lead and cadmium in optical and filter glass. The three exemptions are being concerned for Fiberstore’s transceivers, because Fiberstore’s transceivers use glass, which may contain Pb, for components such as lenses, windows, isolators, and other electronic components.
Table 4 - Performance Specifications – Electrical Parameter
Symbol
Min
Typ
Max
Unit
Notes
Supply Current
Icc
-
-
100
mA
Note2
VIN
250
-
1200
mVpp
Vo
185
-
1000
mVpp
Transmitter Differential Input Voltage (PECL) Receiver Differential Output Voltage (PECL) Impedance
Zcable
90
100
110
Ohms
MOD-DEF1, 2
VIH
2.0
-
Vcc
V
Notes: Note2: The supply current includes SFP Module’s supply current and test board working current.
Table 5 - Physical Data Parameter
Description
30AWG
24AWG.
Cable Diameter
OD
4.5
6.5
mm
Bend Radius
Minimum Sustained Bend
25
35
mm
3
Units
Datasheet
Reference Interface
Pin Descriptions
4
Datasheet Pin No.
Logic
1
Symbol
Name/Description
VeeT
Transmitter Ground
Note
2
LV-TTL-O
TX_Fault
N/A
3
3
LV-TTL-I
TX_DIS
Transmitter Disable
4
4
LV-TTL-I/O
SDA
Two Wire Serial Data
5
LV-TTL-I
SCL
Two Wire Serial Clock
6
Module present,connect to
MOD_DEF0
VeeT.
7
LV-TTL-I
RS0
N/A
3
8
LV-TTL-O
LOS
LOS of Signal.
4
9
LV-TTL-I
RS1
3
10
VeeR
Receiver Ground
11
VeeR
Receiver Ground
12
CML-O
RD-
Receiver Data Inverted
13
CML-O
RD+
Receiver Data NON-Inverted
14
VeeR
Receiver Ground
15
VccR
Receiver Supply 3.3V
16
VccT
Transmitter Supply 3.3V
17
VeeT
Transmitter Ground Transmitter Data
18
CML-I
TD+
19
CML_I
TD-
Receiver Data Inverted
VeeT
Transmitter Ground
20
Non-Inverted
Notes: Note3: Signals not supported in SFP+ Copper pulled-down to VeeT with 30K ohms resistor. Note4: Passive cable assemblies do not support LOS and TX_DIS
5
Datasheet
EEPROM Serial ID Memory Contents
Data Address
Size (Bytes)
Name of Field
Contents(Hex)
Description
SFP
BASE ID FIELDS 0
1
Identifier
03
1
1
Ext. Identifier
04
SFP function is defined by serial ID only
2
1
Connector
21
Copper Pigtail
3-10
8
Transceiver
00 00 00 FF 00 00 00 00
Transceiver Codes
11
1
Encoding
01
8B10B
12
1
BR, Nominal
XX
13
1
Reserved
00
14
1
Length (9µm) km
00
15
1
Length (9µm) 100m
00
16
1
Length (50µm) 10m
00
17
1
Length(62.5µm)10m
00
18
1
Length (Copper)
00 6
Datasheet 19
1
Reserved
XX
20-35
16
Vendor name
XX
36
1
Reserved
00
37-39
3
Vendor OUI
00 00 00
40-55
16
Vendor PN
XX
56-59
4
Vendor rev
XX
60-61
2
Wavelength
00 00
62
1
Reserved
00
63
1
CC_BASE
Check Sum (Variable)
EXTENDED ID FIELDS 64-65
2
Options
00 00
66
1
BR,max
00
67
1
BR,min
00 Serial Number of
68-83
16
Vendor SN
XX
transceiver (ASCII). For example “B009822”.
84-91
8
92
1
93
1
94
1
95
1
Date code
XX
Diagnostic
Manufactory date code. For example “060805”.
00
Monitoring Type Enhanced Options
00
SFF_8472
00
Compliance CC_EXT
Check Sum (Variable)
VENDOR SPECIFIC ID FIELDS 96-127
32
Vendor specific
XX
Vendor specific EEPROM
128-255
128
Reserved
XX
Reserved for SFF-8079
7
Datasheet
Mechanical Specifications
Ordering Information Part No.
Data Rate (Gbps)
Length (m)
AWG
Passive / Active
Temp. Range (°C)
10GSFP-PC-24-0.5-xx
10.5
0.5
24
Passive
0 to +70
10GSFP-PC-24-1-xx
10.5
1
24
Passive
0 to +70
10GSFP-PC-24-2-xx
10.5
2
24
Passive
0 to +70
10GSFP-PC-24-3-xx
10.5
3
24
Passive
0 to +70
10GSFP-PC-24-4-xx
10.5
4
24
Passive
0 to +70
10GSFP-PC-24-5-xx
10.5
5
24
Passive
0 to +70
10GSFP-PC-24-7-xx
10.5
7
24
Passive
0 to +70
10GSFP-PC-24-8-xx
10.5
8
24
Passive
0 to +70
10GSFP-PC-24-9-xx
10.5
9
24
Passive
0 to +70
10GSFP-PC-24-10-xx
10.5
10
24
Passive
0 to +70
10GSFP-PC-24-12-xx
10.5
12
24
Passive
0 to +70
Notes: xx means compatible brand. (For example: CO= Cisco, JU=Juniper, FD=Foundry, EX=Extreme, NE=Netgear.)
8
Datasheet
FiberStore U.S.
FiberStore Hong Kong
FiberStore China
X205 4181 129th Place SE, Bellevue
1220 Tung Chun Commercial Centre,
5D Intelligent Tower,
98006, WA,
438-444 Shanghai Street, Kowloon,
Fumin Road Futian,
United States
HongKong
Shenzhen 518045, GuangDong,
Tel: +1 (206) 453 0158
Tel: (852) 8120 3582
China
Fax: +1 (425) 505 2761
Fax: (852) 8120 3582
Tel: +86 (755) 8300 3611 Fax: +86 (755) 8326 9395
Addresses, phone number and fax number also have been listed at www.fiberstore.com. Please e-mail us at [email protected] or call us for assistance. All statements, technical information, and recommendations related to the products herein are based upon information believed to be reliable or accurate. However, the accuracy or completeness thereof is not guaranteed, and no responsibility is assumed for any inaccuracies. Please contact FiberStore for more information.
9
10GbE SFP+ Direct Attach Passive Copper Cable 1M AWG24 10GSFP-PC-24-1-xx
Features
Supports 1Gb/s to 10.5Gb/s bit rates
Support 1x, 2x, 4x and 8x Fiber Channel data rates
Hot-pluggable SFP 20PIN footprint
AC coupling of PECL signals
Improved Pluggable Form Factor (IPF) compliant for enhanced EMI/EMC Performance
Lower Power Consumption< 0.5W
Power Supply: +3.3V
Compatible to SFP+ MSA
Temperature Range: 0~ 70°C
RoHS6 Compliant
Applications
Storage Area Networks (SAN), Network Attached Storage and Storage Servers
1G/2G/4G/8G Fiber Channel
Switched fabric I/O
Data center cabling infrastructure
Hubs, switches, routers, servers, NICs
Description 10GSFP-PC-24-1-xx Copper SFP+ Cable assemblies are high-performance, cost effective I/O solutions for 10 GB Ethernet and 10G Fiber Channel applications. SFP+ copper modules allow hardware manufacturers to achieve high port density, configurability and utilization at a very low cost and to reduce power budget. The high-speed cable assemblies meet and exceed the performance and reliability requirements stipulated by Gigabit Ethernet and Fiber Channel industry standard.
1
Datasheet
Specifications Table 1 - Absolute Maximum Ratings Parameter
Symbol
Min
Maximum Supply Voltage
Vcc
Storage Temperature
Ts
Typ
Max
Units
-0.5
4.0
V
-40
85
°C
Table 2 - Normal operating condition Parameter
Symbol
Min
Operating Case Temperature
Top
0
Supply Voltage
Vcc
3.14
Power Consumption
P
Data Rate
1
Typ
3.3
Max
Unit
70
°C
3.47
V
0.5
W
10.5
Gbps
Table 3 - Regulatory Compliance Feature
Standard MIL-STD-883G
Electrostatic Discharge (ESD) to the Electrical Pins
Method 3015.7
Performance Class 1C (>1000 V)
EN 55024:1998+A1+A2 Electrostatic Discharge to the enclosure
IEC-61000-4-2
Compatible with standards
GR-1089-CORE Compatible with standards Noise frequency range: FCC Part 15 Class B
30MHz to 6GHz. Good system
EN55022:2006
EMI design practice required
CISPR 22B :2006
to achieve Class B margins.
VCCI Class B
System margins are dependent on
Electromagnetic Interference (EMI)
customer host board and chassis design. Compatible with standards. 1KHz sine-wave, 80% AM, Immunity
EN 55024:1998+A1+A2
from 80MHz to 1GHz. No
IEC 61000-4-3
effect on transmitter/receiver performance is detectable between these limits.
FDA 21CFR 1040.10 and Laser Eye Safety
1040.11 EN (IEC) 60825-1:2007 EN (IEC) 60825-2:2004+A1 2
CDRH compliant and Class I laser product. TüV Certificate No. 50135086
Datasheet UL file E317337
UL and CUL
Component Recognition
TüV Certificate No. 50135086 (CB
EN60950-1:2006
scheme )
2002/95/EC 4.1&4.2
RoHS6
Compliant with standards*note1
2005/747/EC 5&7&13
Notes: Note1: For update of the equipments and strict control of raw materials, Fiberstore has the ability to supply the customized products since Jan 1th, 2007, which meet the requirements of RoHS6 (Restrictions on use of certain Hazardous Substances) of European Union. In light of item 5 in RoHS exemption list of RoHS Directive 2002/95/EC, Item 5: Lead in glass of cathode ray tubes, electronic components and fluorescent tubes. In light of item 13 in RoHS exemption list of RoHS Directive 2005/747/EC, Item13: Lead and cadmium in optical and filter glass. The three exemptions are being concerned for Fiberstore’s transceivers, because Fiberstore’s transceivers use glass, which may contain Pb, for components such as lenses, windows, isolators, and other electronic components.
Table 4 - Performance Specifications – Electrical Parameter
Symbol
Min
Typ
Max
Unit
Notes
Supply Current
Icc
-
-
100
mA
Note2
VIN
250
-
1200
mVpp
Vo
185
-
1000
mVpp
Transmitter Differential Input Voltage (PECL) Receiver Differential Output Voltage (PECL) Impedance
Zcable
90
100
110
Ohms
MOD-DEF1, 2
VIH
2.0
-
Vcc
V
Notes: Note2: The supply current includes SFP Module’s supply current and test board working current.
Table 5 - Physical Data Parameter
Description
30AWG
24AWG.
Cable Diameter
OD
4.5
6.5
mm
Bend Radius
Minimum Sustained Bend
25
35
mm
3
Units
Datasheet
Reference Interface
Pin Descriptions
4
Datasheet Pin No.
Logic
1
Symbol
Name/Description
VeeT
Transmitter Ground
Note
2
LV-TTL-O
TX_Fault
N/A
3
3
LV-TTL-I
TX_DIS
Transmitter Disable
4
4
LV-TTL-I/O
SDA
Two Wire Serial Data
5
LV-TTL-I
SCL
Two Wire Serial Clock
6
Module present,connect to
MOD_DEF0
VeeT.
7
LV-TTL-I
RS0
N/A
3
8
LV-TTL-O
LOS
LOS of Signal.
4
9
LV-TTL-I
RS1
3
10
VeeR
Receiver Ground
11
VeeR
Receiver Ground
12
CML-O
RD-
Receiver Data Inverted
13
CML-O
RD+
Receiver Data NON-Inverted
14
VeeR
Receiver Ground
15
VccR
Receiver Supply 3.3V
16
VccT
Transmitter Supply 3.3V
17
VeeT
Transmitter Ground Transmitter Data
18
CML-I
TD+
19
CML_I
TD-
Receiver Data Inverted
VeeT
Transmitter Ground
20
Non-Inverted
Notes: Note3: Signals not supported in SFP+ Copper pulled-down to VeeT with 30K ohms resistor. Note4: Passive cable assemblies do not support LOS and TX_DIS
5
Datasheet
EEPROM Serial ID Memory Contents
Data Address
Size (Bytes)
Name of Field
Contents(Hex)
Description
SFP
BASE ID FIELDS 0
1
Identifier
03
1
1
Ext. Identifier
04
SFP function is defined by serial ID only
2
1
Connector
21
Copper Pigtail
3-10
8
Transceiver
00 00 00 FF 00 00 00 00
Transceiver Codes
11
1
Encoding
01
8B10B
12
1
BR, Nominal
XX
13
1
Reserved
00
14
1
Length (9µm) km
00
15
1
Length (9µm) 100m
00
16
1
Length (50µm) 10m
00
17
1
Length(62.5µm)10m
00
18
1
Length (Copper)
00 6
Datasheet 19
1
Reserved
XX
20-35
16
Vendor name
XX
36
1
Reserved
00
37-39
3
Vendor OUI
00 00 00
40-55
16
Vendor PN
XX
56-59
4
Vendor rev
XX
60-61
2
Wavelength
00 00
62
1
Reserved
00
63
1
CC_BASE
Check Sum (Variable)
EXTENDED ID FIELDS 64-65
2
Options
00 00
66
1
BR,max
00
67
1
BR,min
00 Serial Number of
68-83
16
Vendor SN
XX
transceiver (ASCII). For example “B009822”.
84-91
8
92
1
93
1
94
1
95
1
Date code
XX
Diagnostic
Manufactory date code. For example “060805”.
00
Monitoring Type Enhanced Options
00
SFF_8472
00
Compliance CC_EXT
Check Sum (Variable)
VENDOR SPECIFIC ID FIELDS 96-127
32
Vendor specific
XX
Vendor specific EEPROM
128-255
128
Reserved
XX
Reserved for SFF-8079
7
Datasheet
Mechanical Specifications
Ordering Information Part No.
Data Rate (Gbps)
Length (m)
AWG
Passive / Active
Temp. Range (°C)
10GSFP-PC-24-0.5-xx
10.5
0.5
24
Passive
0 to +70
10GSFP-PC-24-1-xx
10.5
1
24
Passive
0 to +70
10GSFP-PC-24-2-xx
10.5
2
24
Passive
0 to +70
10GSFP-PC-24-3-xx
10.5
3
24
Passive
0 to +70
10GSFP-PC-24-4-xx
10.5
4
24
Passive
0 to +70
10GSFP-PC-24-5-xx
10.5
5
24
Passive
0 to +70
10GSFP-PC-24-7-xx
10.5
7
24
Passive
0 to +70
10GSFP-PC-24-8-xx
10.5
8
24
Passive
0 to +70
10GSFP-PC-24-9-xx
10.5
9
24
Passive
0 to +70
10GSFP-PC-24-10-xx
10.5
10
24
Passive
0 to +70
10GSFP-PC-24-12-xx
10.5
12
24
Passive
0 to +70
Notes: xx means compatible brand. (For example: CO= Cisco, JU=Juniper, FD=Foundry, EX=Extreme, NE=Netgear.)
8
Datasheet
FiberStore U.S.
FiberStore Hong Kong
FiberStore China
X205 4181 129th Place SE, Bellevue
1220 Tung Chun Commercial Centre,
5D Intelligent Tower,
98006, WA,
438-444 Shanghai Street, Kowloon,
Fumin Road Futian,
United States
HongKong
Shenzhen 518045, GuangDong,
Tel: +1 (206) 453 0158
Tel: (852) 8120 3582
China
Fax: +1 (425) 505 2761
Fax: (852) 8120 3582
Tel: +86 (755) 8300 3611 Fax: +86 (755) 8326 9395
Addresses, phone number and fax number also have been listed at www.fiberstore.com. Please e-mail us at [email protected] or call us for assistance. All statements, technical information, and recommendations related to the products herein are based upon information believed to be reliable or accurate. However, the accuracy or completeness thereof is not guaranteed, and no responsibility is assumed for any inaccuracies. Please contact FiberStore for more information.
9
