Retroreflective sensor with polarization filter
ML100-55/103/115
Dimensions
20 3
12.1
M3
11
31
8.7
25.4
Receiver
4.1
2.8
Transmitter
ø 3.5
Model Number ML100-55/103/115 Retroreflective sensor with 2 m fixed cable
Features
Electrical connection Option:
103
BN
+UB
BU
0V
BK
Q
• Miniature design • Easy to use • Clearly visible LEDs for Power ON, switching state and stability control • Full metal thread mounting • Very bright, highly visible light spot • Not sensitive to ambient light
Product information The ML100 series is characterized by its miniature housing with integral, all-metal threaded bushings. All versions are equipped with a visible red transmitter LED. This greatly simplifies installation and commissioning. The switching states are easily visible from all directions thanks to the highly visible LEDs.
= Light on = Dark on
Indicators/operating means 4
1
2 1 Light-Dark-switching
Release date: 2013-11-20 11:22 Date of issue: 2013-11-20 210545_eng.xml
2 Sensitivity adjuster
3
Refer to “General Notes Relating to Pepperl+Fuchs Product Information”. Pepperl+Fuchs Group USA: +1 330 486 0001 Germany: +49 621 776 4411
[email protected] www.pepperl-fuchs.com
[email protected] Singapore: +65 6779 9091
[email protected] 3 Signal display
yellow
4 Operating display
green
1
Retroreflective sensor with polarization filter
ML100-55/103/115
Technical data
Accessories 0 ... 5 m 0.01 ... 5 m 7m H50 reflector LED modulated visible red light approx. 500 mm at a distance of 7 m approx. 4 ° frontal EN 60947-5-2
Functional safety related parameters MTTFd Mission Time (TM) Diagnostic Coverage (DC)
860 a 20 a 0%
Indicators/operating means Operation indicator Function indicator
Output Switching type Signal output Switching voltage Switching current Voltage drop Switching frequency Response time
Ambient conditions Ambient temperature Storage temperature Mechanical specifications Protection degree Connection Material Housing Optical face Mass Cable length
OMH-ML100-01 Mounting bracket OMH-ML100-02 Mounting bracket OMH-ML100-03 Mounting aid for round steel ø 12 mm or sheet 1.5 mm ... 3 mm OMH-ML100-04 Mounting bracket
LED green: power on LED yellow: lights up when receiving the light beam ; flashes when falling short of the stability control; OFF when light beam is interrupted sensitivity adjustment Light/Dark switch
Control elements Control elements
Electrical specifications Operating voltage Ripple No-load supply current
OMH-F10-ML100 Mounting aid for ML100 series
UB I0
Ud f
10 ... 30 V DC , class 2 max. 10 % < 20 mA light/dark on, switchable 1 PNP output, short-circuit protected, reverse polarity protected, open collector max. 30 V DC max. 100 mA , resistive load ≤ 1.5 V DC 1000 Hz 0.5 ms
2
OMH-10 Mounting aid REF-H85-2 Reflector, rectangular 84.5 mm x 84.5 mm, mounting holes REF-C110-2 Reflector, round ø 84 mm, central mounting hole REF-H60-2 Reflector with mounting holes REF-H50 Reflector, rectangular 51 mm x 51 mm, mounting holes, fixing strap REF-H33 Reflector with screw fixing
-30 ... 60 °C (-22 ... 140 °F) -40 ... 70 °C (-40 ... 158 °F)
OFR-70-2 Reflective tape 70 mm x 70 mm
IP67 2 m fixed cable
REF-MH23-2 Reflector with Micro-structure, rectangular 23 mm x 14 mm, diagonal mounting hole
PC (Polycarbonate) PMMA approx. 50 g 2m
OMH-ML100-S1 Mounting bracket
Compliance with standards and directives Directive conformity EMC Directive 2004/108/EC EN 60947-5-2 Standard conformity Standards UL 508 Approvals and certificates UL approval CCC approval Approvals
OMH-ML100-05 Mounting bracket
Other suitable accessories can be found at www.pepperl-fuchs.com
cULus Listed, Class 2 Power Source, Type 1 enclosure CCC approval / marking not required for products rated ≤36 V CE, cULus Listed 57M3 (Only in association with UL Class 2 power supply; Type 1 enclosure)
Refer to “General Notes Relating to Pepperl+Fuchs Product Information”. Pepperl+Fuchs Group USA: +1 330 486 0001 Germany: +49 621 776 4411
[email protected] www.pepperl-fuchs.com
[email protected] Singapore: +65 6779 9091
[email protected] Release date: 2013-11-20 11:22 Date of issue: 2013-11-20 210545_eng.xml
General specifications Effective detection range Reflector distance Threshold detection range Reference target Light source Light type Diameter of the light spot Angle of divergence Optical face Ambient light limit
Retroreflective sensor with polarization filter
ML100-55/103/115
Curves/Diagrams
Characteristic response curve Offset Y [mm] 200 150 100 50 0 -50 -100 -150 -200 0
2
4
6
8
10 Distance X [m]
H85-2 offset C110-2 offset H60-2 offset H50 offset OFR70-2 offset
Y
X
Relative received light strength Reflector type: H85-2
20 mm
C110-2
20 mm
H60-2
20 mm
H50
20 mm
10 m 8.5 m 7.5 m 7m
150 mm
H33
3.4 m
40 mm
OFR70-2
3m
Stability control Stability control > 2
100.0
Stability control < 2
H85-2 C110-2 H60-2 H50 H33 OFR70-2
10.0
2 1.0
X
0 2
4
6
8
10 Distance X [m]
Release date: 2013-11-20 11:22 Date of issue: 2013-11-20 210545_eng.xml
0
Refer to “General Notes Relating to Pepperl+Fuchs Product Information”. Pepperl+Fuchs Group USA: +1 330 486 0001 Germany: +49 621 776 4411
[email protected] www.pepperl-fuchs.com
[email protected] Singapore: +65 6779 9091
[email protected] 3