120º 120º 60mm 60mm 60mm X Y Z - Thingiverse
Delta printer tower angle & individual diagonal rod calibration object Calibration instructions on: http://www.thingiverse.com/thing:745523
Blocks: ● 50mm inside ● 60mm outside ● 5mm height
60mm
120º
60mm
X
118 119 120 121 122
Z
Steps 1) Print the calibration object slow 30mm/s, layer height 0.2mm, infill 30% 2) Remove object when print bed is completely cool 3) Align the Z axis of the object with the Z axis on this sheet and center the object 4) Determine angles between Z-Y and Z-X 5) Measure distance between the block outside for each axis 6) Follow instructions on thingiverse to calibrate the tower position error and individual diagonal rod length error
60mm
120º
118 119 120 121 122
Y
Blocks: ● 50mm inside ● 60mm outside ● 5mm height
60mm
120º
60mm
X
118 119 120 121 122
Z
Steps 1) Print the calibration object slow 30mm/s, layer height 0.2mm, infill 30% 2) Remove object when print bed is completely cool 3) Align the Z axis of the object with the Z axis on this sheet and center the object 4) Determine angles between Z-Y and Z-X 5) Measure distance between the block outside for each axis 6) Follow instructions on thingiverse to calibrate the tower position error and individual diagonal rod length error
60mm
120º
118 119 120 121 122
Y
