1996-1998 Acura TL Center Dash Replacement

1996-1998 Acura TL Center Dash Replacement

1996-1998 Acura TL Center Dash Replacement This guide will show you how to take out the center dash, which looks like wood, to get to the AC control and stereo head unit behind it.

Written By: Brayden

© iFixit — CC BY-NC-SA

www.iFixit.com

Page 1 of 4

1996-1998 Acura TL Center Dash Replacement

INTRODUCTION Here you will learn how to remove the wood panel from the center dash unit. After doing this guide you will be free to get to the center dash and stereo/cd/cassete players.

TOOLS: Flathead Screwdriver (1)

© iFixit — CC BY-NC-SA

www.iFixit.com

Page 2 of 4

1996-1998 Acura TL Center Dash Replacement

Step 1 — Center Dash 

© iFixit — CC BY-NC-SA

www.iFixit.com

Using a panel tool or long flat head screwdriver, pry the wood grain trim off and release the clips. Be careful on the thin sections below the head unit as to not snap the trim.

Page 3 of 4

1996-1998 Acura TL Center Dash Replacement

Step 2 

Detach the wiring harness from the back of the air conditioning control unit by pushing down on the top middle tab and pulling apart using a screwdriver for leverage if necessary.

To reassemble your device, follow these instructions in reverse order. This document was last generated on 2017-06-22 01:10:33 AM.

© iFixit — CC BY-NC-SA

www.iFixit.com

Page 4 of 4