1999-2002 Suzuki SV650 Seat Replacement - the-eye.eu
1999-2002 Suzuki SV650 Seat Replacement
1999-2002 Suzuki SV650 Seat Replacement Remove the seat from your '99-'02 SV650 to gain access to your fuse box, tank hinge bolts and various other electrical connections.
Written By: Phillip Takahashi
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 1 of 3
1999-2002 Suzuki SV650 Seat Replacement
INTRODUCTION Remove the seat from your '99-'02 SV650 to gain access to your fuse box, tank hinge bolts and various other electrical connections.
TOOLS: 4mm Allen Wrench (1)
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 2 of 3
1999-2002 Suzuki SV650 Seat Replacement
Step 1 — Seat
If you have frame covers below your seat, remove them by removing the 4 mm allen bolts holding them on. Use a 4 mm allen wrench to turn the screws counter-clockwise until they come off.
Once the frame covers are off, remove the 4 mm allen seat bolts on both sides of the seat. Use the 4 mm allen wrench to turn the screws counter-clockwise until they come off.
The bolt in the picture is not stock.
Lift the front of the seat, then pull it off the frame.
To reassemble your device, follow these instructions in reverse order. This document was last generated on 2017-06-20 07:56:19 AM.
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 3 of 3
1999-2002 Suzuki SV650 Seat Replacement Remove the seat from your '99-'02 SV650 to gain access to your fuse box, tank hinge bolts and various other electrical connections.
Written By: Phillip Takahashi
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 1 of 3
1999-2002 Suzuki SV650 Seat Replacement
INTRODUCTION Remove the seat from your '99-'02 SV650 to gain access to your fuse box, tank hinge bolts and various other electrical connections.
TOOLS: 4mm Allen Wrench (1)
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 2 of 3
1999-2002 Suzuki SV650 Seat Replacement
Step 1 — Seat
If you have frame covers below your seat, remove them by removing the 4 mm allen bolts holding them on. Use a 4 mm allen wrench to turn the screws counter-clockwise until they come off.
Once the frame covers are off, remove the 4 mm allen seat bolts on both sides of the seat. Use the 4 mm allen wrench to turn the screws counter-clockwise until they come off.
The bolt in the picture is not stock.
Lift the front of the seat, then pull it off the frame.
To reassemble your device, follow these instructions in reverse order. This document was last generated on 2017-06-20 07:56:19 AM.
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 3 of 3
