1.Contents Body x1 Steer x1 Seat x1 Pedals x2
1.Contents
Body x1 Steer x1 Seat x1 Pedals x2
© Copyright 2013-2014. UDS Global Limited.
2.Unfold the bike (body)
a. Hinge part should appear the same as above
© Copyright 2013-2014. UDS Global Limited.
b. Pull the level upwards, and close the hinge
© Copyright 2013-2014. UDS Global Limited.
c. A properly closed hinge, note the deadbolt rest inside the hole
© Copyright 2013-2014. UDS Global Limited.
d. Lock the hinge like above
© Copyright 2013-2014. UDS Global Limited.
3.Assemble the handle
a. Align correctly
© Copyright 2013-2014. UDS Global Limited.
b.Adjust the crew
© Copyright 2013-2014. UDS Global Limited.
c. A properly finished handle part
© Copyright 2013-2014. UDS Global Limited.
4.Unfold the bike (Steer)
a. Adjust the screw
© Copyright 2013-2014. UDS Global Limited.
b.A properly adjusted hinge before locking
© Copyright 2013-2014. UDS Global Limited.
c. A properly adjusted hinge after locking
© Copyright 2013-2014. UDS Global Limited.
d.Fix the lever by the plastic ring
© Copyright 2013-2014. UDS Global Limited.
5.Assemble the seat
a. Place the seat tube
© Copyright 2013-2014. UDS Global Limited.
b.Adjust the screw
© Copyright 2013-2014. UDS Global Limited.
c. Tighten the lock
© Copyright 2013-2014. UDS Global Limited.
6.Assemble the pedals
a. Distinguish left and right pedals
© Copyright 2013-2014. UDS Global Limited.
b.Install left pedal, anti-clockwise direction
© Copyright 2013-2014. UDS Global Limited.
c. Install right pedal, clockwise direction
© Copyright 2013-2014. UDS Global Limited.
7.Brake adjustment
a. Loosen the screw b.Pull the wire away from the bike until the brake works c. Tighten the screw d.If either side of the brake is too close to the tire, screw in the spring adjuster to increase spring tension e. The brake may not look symmetric to you, but it still works © Copyright 2013-2014. UDS Global Limited.
8.Gear (derailleur) adjustment
a. Loosen the screw b.Pull the wire away from the bike until the gear works c. Tighten the screw d.Adjust the high and low gear screw so that the derailleur works from gear 1 to gear 6
© Copyright 2013-2014. UDS Global Limited.
Body x1 Steer x1 Seat x1 Pedals x2
© Copyright 2013-2014. UDS Global Limited.
2.Unfold the bike (body)
a. Hinge part should appear the same as above
© Copyright 2013-2014. UDS Global Limited.
b. Pull the level upwards, and close the hinge
© Copyright 2013-2014. UDS Global Limited.
c. A properly closed hinge, note the deadbolt rest inside the hole
© Copyright 2013-2014. UDS Global Limited.
d. Lock the hinge like above
© Copyright 2013-2014. UDS Global Limited.
3.Assemble the handle
a. Align correctly
© Copyright 2013-2014. UDS Global Limited.
b.Adjust the crew
© Copyright 2013-2014. UDS Global Limited.
c. A properly finished handle part
© Copyright 2013-2014. UDS Global Limited.
4.Unfold the bike (Steer)
a. Adjust the screw
© Copyright 2013-2014. UDS Global Limited.
b.A properly adjusted hinge before locking
© Copyright 2013-2014. UDS Global Limited.
c. A properly adjusted hinge after locking
© Copyright 2013-2014. UDS Global Limited.
d.Fix the lever by the plastic ring
© Copyright 2013-2014. UDS Global Limited.
5.Assemble the seat
a. Place the seat tube
© Copyright 2013-2014. UDS Global Limited.
b.Adjust the screw
© Copyright 2013-2014. UDS Global Limited.
c. Tighten the lock
© Copyright 2013-2014. UDS Global Limited.
6.Assemble the pedals
a. Distinguish left and right pedals
© Copyright 2013-2014. UDS Global Limited.
b.Install left pedal, anti-clockwise direction
© Copyright 2013-2014. UDS Global Limited.
c. Install right pedal, clockwise direction
© Copyright 2013-2014. UDS Global Limited.
7.Brake adjustment
a. Loosen the screw b.Pull the wire away from the bike until the brake works c. Tighten the screw d.If either side of the brake is too close to the tire, screw in the spring adjuster to increase spring tension e. The brake may not look symmetric to you, but it still works © Copyright 2013-2014. UDS Global Limited.
8.Gear (derailleur) adjustment
a. Loosen the screw b.Pull the wire away from the bike until the gear works c. Tighten the screw d.Adjust the high and low gear screw so that the derailleur works from gear 1 to gear 6
© Copyright 2013-2014. UDS Global Limited.
