2 HP Model 200 - Atlanta Fixture
2 H.P. Model 200 JOB:
Item No.:
FOOD WASTE DISPOSER SPECIFICATIONS CORROSION RESISTANT BODY Permanent molded from heat treated aluminum alloy.
TEFLON LIP WATER SEAL Protects the motor from damage by water.
TAPERED ROLLER BEARING Provides longer motor life, quiet operation and shock absorbing.
WATER COOLED MOTOR Provides maximum efficiency and longer life.
QUIET OPERATION Extra thick rubber mounting adaptor and drain outlet isolates sound and eliminates vibration.
Cone Assembly TABLE CUT-OUT: 12” CONE - 12 7/8” 15” CONE - 15 7/8” 18” CONE - 18 7/8”
ALL PIPING 1/2" OPTIONAL CONE COVER
VACUUM BREAKER
SOLENOID VALVE W/ WATER FLOW CONTROL
1 2
/ " FIXED NOZZLE
NEMA 4 Watertight Controls SCRAP RING
DISPOSER CONTROL
FOOD WASTE DISPOSER
2" DRAIN
MSS
MRSS
NOTE: INSTALL PER ALL APPLICABLE CODES
FULL LOAD AMPS
ARSS-2
ARSS
Optional Line Disconnect (LD) available on MSS, MRSS, & ARSS
■ ■ ■ ■ ■ ■
115 Volts
1 Phase
24 Amps
208 Volts
1 Phase
12.1 Amps
230 Volts
1 Phase
12.0 Amps
208 Volts
3 Phase
6.6 Amps
230 Volts
3 Phase
6.0 Amps
460 Volts
3 Phase
3.0 Amps
◆ SPECIFY EXACT OPERATING VOLTAGE ◆
Salvajor Model 200 Food Waste Disposer 2 HP – 1 Phase & 3 Phase D
E
T
A
I
L
S
A
N
D
D
I
M
E
N
S
I
O
N
S
SPECIFICATIONS: 18" CONE
15" CONE
/2" FIXED NOZZLE
20 7/8" (53.02)
177/8" (45.40) 15" (38.10)
55/8" (14.29)
61/2" (16.51)
1 /2" NPT WATER INLET 81/2" (21.59)
13" (33.02)
MOUNTING – Rubber adaptor above grind chamber and rubber drain outlet isolates sound and eliminates vibration. No metal to metal contact.
EXTERIOR HOUSING – Permanent molded from heat treated, corrosion resistant aluminum alloy then computer machined to a smooth polished finish. Paint free.
SHREDDER – 8 inch diameter, machined high strength,
1
2 1 7/16" (54.45)
wear resistant hardened carbide alloy.
ROTOR – 8 inch diameter with 4 cutter bars, machined high strength, wear resistant hardened carbide alloy.
18" (45.72)
81/2" (21.59)
2" DRAIN
61/2" (16.51)
141/8" (35.92) 55/8" (14.29)
12" CONE POWER ENTRANCE
147/8" (37.78) 12" (30.48)
RESET BUTTON
61/2" (16.51)
MOTOR – 2 HP totally enclosed. Water cooled for efficiency and longer life. Built-in manual reset thermal overload protection. Available in 208 volts or 115/ 230 volts, 60 cycle, 1 phase and 208-230/460 volts, 60 cycle, 3 phase.
31/2" SINK MOUNT 31/2" (8.89) SINK OPENING
SEAL – Teflon Lip Water Seal. WATER REQUIREMENT – 5 gallons of cold water per minute.
WASTE OUTLET – Rubber drain accepts 2” piping.
1 /2" NPT WATER INLET 81/2" (21.59)
15 13/16" (40.16)
2" DRAIN
/4" (1.91)
81/2" (21.59)
DUAL DIRECTION GRINDING – Designed to
ASSEMBLIES: (See Specification Sheet) CA – Cone Assembly with 12”, 15” or 18” Cone SA – Sink Assembly with 3 1⁄2” or 6 1⁄2” Sink Collar
MSS: (Non Reversing) MRSS: (Manual Reversing) ARSS-2: (Automatic Reversing) ARSS: (Automatic Reversing)
91/4" (23.50)
ADJUSTABLE LEG (OPTIONAL)
POWER ENTRANCE
10 9/16"(26.78) to 14 3/16"(35.99)
NOTE: Dimensions in parenthesis are in centimeters (Specifications subject to change without notice) Current specification details may be found online at www.salvajor.com
SAMPLE SPECIFICATION 200- CA-18
DISPOSER CONTROLS: (See Specification Sheet)
55/8" (14.29)
RESET BUTTON
operate in either direction. Direction of rotation can be controlled when installed with automatic reversing controls. Reversing rotation can double cutting teeth life.
LEG SUPPORT (Optional) – Single leg, adjustable.
65/8" (16.83) CUTOUT
3
13" (33.02)
55/8" (14.29)
61/2" SINK MOUNT
BEARINGS – Tapered roller (top) Sealed ball (bottom)
55/8" (14.29)
Model
Cone Size Assembly
ARSS Disposer Control
( 230/60/3 ) Electrical Specs.
◆ SPECIFY EXACT OPERATING VOLTAGE ◆
The Salvajor Company 1- 800 - SALVAJOR www.salvajor.com
4530 East 75th Terrace Kansas City, Missouri 64132-2081, USA (816) 363 - 1030 FAX: 1 - 800 - 832 - 9373 Email: [email protected] [email protected]
Manufacturers of Commercial Food Waste Disposing Systems since 1944
Printed in USA Form No.S200-9-BH
Salvajor CA: Cone Assembly FOR MODELS : 75 - 100 - 150 - 200 - 300 - 500 - 750
EQUIPMENT FURNISHED: A DISPOSER B 12", 15" or 18" CONE
12" CONE
15" CONE
C FIXED NOZZLE, 1⁄ 2" D VACUUM BREAKER E SOLENOID VALVE, 1⁄ 2" F SCRAP RING G FLOW CONTROL
18" CONE
H DISPOSER CONTROL
SAMPLE SPECIFICATION: 300-CA-18 ARSS (208/60/3) Model
Cone Size
OPTIONAL CONE COVER 12", 15", 18"
Disposer Control
Assembly
Electrical Specs.
◆ SPECIFY EXACT OPERATING VOLTAGE ◆ (Specifications subject to change without notice) Current specification details may be found online at www.salvajor.com
Cone Assembly TABLE CUT-OUT : 12" CONE–12 7⁄ 8" 15" CONE–15 7⁄ 8" 18" CONE–18 7⁄ 8"
D OPTIONAL CONE COVER
E
Models 75-200
Models 300-750
B F
2” Drain
C
G H
2” or 3” Drain
A
Leg Optional Leg Included
NOTE : INSTALL PER ALL APPLICABLE CODES
Salvajor CA: Cone Assembly D
E
T
A
I
L
S
A
N
D
D
I
M
E
N
S
I
O
N
S
FOR MODELS : 75 - 100 - 150 - 200 - 300 - 500 - 750 A B
1
/2" FIXED NOZZLE
55/8" (14.29)
61/2" (16.51)
1 /2" NPT WATER INLET
13" (33.02)
C
55/8" (14.29)
E
81/2" (21.59)
F
POWER ENTRANCE
D
RESET BUTTON
Adjustable leg optional on Models 75-200
32” (81.28) to 355/8" (90.49)
NOTE: Dimensions in parenthesis are in centimeters. Models 300-750 shown, 75-200 similar.
Dimensions
Cone Dimensions 12” Cone
15” Cone
18” Cone
A
14-7/8” (37.78)
17-7/8” (45.40)
20-7/8” (53.02)
B
12” (30.48)
15” (38.10)
18” (45.72)
Models 75-200
Models 300-750
C
8-1/2” (21.59)
13-13/16” (35.08)
D
7-5/16” (18.57)
6-5/16” (16.03)
E
14-1/8” (35.92)
19-7/16” (49.37)
F
2” Drain
2” or 3” Drain
The Salvajor Company 1- 800 - SALVAJOR www.salvajor.com
4530 East 75th Terrace Kansas City, Missouri 64132-2081, USA (816) 363 - 1030 FAX: 1 - 800 - 832 - 9373 Email: [email protected] [email protected]
Manufacturers of Commercial Food Waste Disposing Systems since 1944
Printed in USA Form No. CA-09-BH
Automatic Reversing Start Stop
Salvajor Model ARSS-2 Pre-Wired Automatic Reversing Control Panel for Disposer Models: 75 - 100 - 150 - 200 - 300 - 500 - 750
SPECIFICATIONS : ■ NEMA 4 Stainless Steel Watertight Enclosure ■ 24 Volt Safety Circuitry ■ Automatic Reversing Magnetic Contactors ■ Terminal Strip Connections ■ START/STOP Push Buttons
VOLTAGES AVAILABLE: 1- PHASE 115 VOLT, 208 -230 VOLT
AUTOMATIC REVERSING
3 - PHASE 208-230 VOLT, 460 VOLT ◆ SPECIFY EXACT OPERATING VOLTAGE ◆
■ #PP - MOUNTED 1⁄ 2" SOLENOID VALVE, FLOW CONTROL AND PRESSURE SWITCH
MODEL ARSS - 2 DISPOSER CONTROL is for use with Salvajor Models: 75 - 100 - 150 - 200 300 - 500 - 750
■ #980105 - MOUNTING BRACKET
WEIGHT: 21 LBS.
ACCESSORIES AVAILABLE: ■ #P - MOUNTED 1⁄ 2" SOLENOID VALVE AND FLOW CONTROL
■ #980104 - REMOTE MOUNTING BRACKET 12 3/8" (31.39)
■ #RSS - REMOTE START/STOP
10 3/16" (25.86)
(Specifications subject to change without notice) Current specification details may be found online at www.salvajor.com
7 1/2" (19.06) 6 5/8" (16.83)
3 1/2" (8.89) 12 3/8" (31.39) 13" (33.02)
NOTE: Dimensions in parenthesis are in centimeters
13 5/8" (34.59)
Typical Installation Diagram of Salvajor Model ARSS -2 Control Panel and Disposer Vacuum Breaker
Solenoid Valve with Flow Control
Optional: Globe Valve
Cone or Sink Cold Water Supply Line
ARSS -2 (P) ( PP )
with Optional ( P ) or ( PP )
ARSS -2 Control Panel Optional: Remote Start/Stop Electrical Supply
Control Panel may be mounted on wall or under table top with optional bracket.
Electrical Supply
Motor has overload protection.
NOTE : INSTALL PER ALL APPLICABLE CODES
#980104 Optional Mounting Bracket for Remote Start / Stop
#980105 Optional Mounting Bracket for ARSS-2 Control Panel 5 /8" (1.59)
12" (30.48)
13" (33.02)
6" (15.24)
16 1/8" (40.96)
5" (12.70) SLOTS 3 /8" x 1" (.95 x 2.54)
15" (38.10)
10 3/16" (25.88)
5" (12.70)
5 /8" (1.59)
8" 9 7/8" 11" (20.32) (25.08) (27.94) 4" (10.16)
# RSS Optional Remote Start / Stop
4 7/8" (12.40)
4 1/4" (10.77) 3 1/2" (8.89)
4" (10.16)
7 1/4" (18.39) 2 3/4" (6.99)
8 5/8" (21.89)
8" (20.32)
/8" HOLES
3
(0.95)
NOTE: Dimensions in parenthesis are in centimeters
Item Numbers for Ordering CONTROL MODEL
VOLTAGE
PHASE
ITEM NO.
ARSS-2
115 208 or 230 208 or 230 460
1 1 3 3
ARSS24 ARSS25 ARSS27 ARSS29
or
ARSS-2-P or
ARSS-2-PP
◆ SPECIFY EXACT OPERATING VOLTAGE ◆
The Salvajor Company 1- 800 - SALVAJOR www.salvajor.com
4530 East 75th Terrace Kansas City, Missouri 64132-2081, USA (816) 363 - 1030 FAX: 1 - 800 - 832 - 9373 Email: [email protected] [email protected]
Manufacturers of Commercial Food Waste Disposing Systems since 1944
Printed in USA Form No. ARSS-2-9-BH
Item No.:
FOOD WASTE DISPOSER SPECIFICATIONS CORROSION RESISTANT BODY Permanent molded from heat treated aluminum alloy.
TEFLON LIP WATER SEAL Protects the motor from damage by water.
TAPERED ROLLER BEARING Provides longer motor life, quiet operation and shock absorbing.
WATER COOLED MOTOR Provides maximum efficiency and longer life.
QUIET OPERATION Extra thick rubber mounting adaptor and drain outlet isolates sound and eliminates vibration.
Cone Assembly TABLE CUT-OUT: 12” CONE - 12 7/8” 15” CONE - 15 7/8” 18” CONE - 18 7/8”
ALL PIPING 1/2" OPTIONAL CONE COVER
VACUUM BREAKER
SOLENOID VALVE W/ WATER FLOW CONTROL
1 2
/ " FIXED NOZZLE
NEMA 4 Watertight Controls SCRAP RING
DISPOSER CONTROL
FOOD WASTE DISPOSER
2" DRAIN
MSS
MRSS
NOTE: INSTALL PER ALL APPLICABLE CODES
FULL LOAD AMPS
ARSS-2
ARSS
Optional Line Disconnect (LD) available on MSS, MRSS, & ARSS
■ ■ ■ ■ ■ ■
115 Volts
1 Phase
24 Amps
208 Volts
1 Phase
12.1 Amps
230 Volts
1 Phase
12.0 Amps
208 Volts
3 Phase
6.6 Amps
230 Volts
3 Phase
6.0 Amps
460 Volts
3 Phase
3.0 Amps
◆ SPECIFY EXACT OPERATING VOLTAGE ◆
Salvajor Model 200 Food Waste Disposer 2 HP – 1 Phase & 3 Phase D
E
T
A
I
L
S
A
N
D
D
I
M
E
N
S
I
O
N
S
SPECIFICATIONS: 18" CONE
15" CONE
/2" FIXED NOZZLE
20 7/8" (53.02)
177/8" (45.40) 15" (38.10)
55/8" (14.29)
61/2" (16.51)
1 /2" NPT WATER INLET 81/2" (21.59)
13" (33.02)
MOUNTING – Rubber adaptor above grind chamber and rubber drain outlet isolates sound and eliminates vibration. No metal to metal contact.
EXTERIOR HOUSING – Permanent molded from heat treated, corrosion resistant aluminum alloy then computer machined to a smooth polished finish. Paint free.
SHREDDER – 8 inch diameter, machined high strength,
1
2 1 7/16" (54.45)
wear resistant hardened carbide alloy.
ROTOR – 8 inch diameter with 4 cutter bars, machined high strength, wear resistant hardened carbide alloy.
18" (45.72)
81/2" (21.59)
2" DRAIN
61/2" (16.51)
141/8" (35.92) 55/8" (14.29)
12" CONE POWER ENTRANCE
147/8" (37.78) 12" (30.48)
RESET BUTTON
61/2" (16.51)
MOTOR – 2 HP totally enclosed. Water cooled for efficiency and longer life. Built-in manual reset thermal overload protection. Available in 208 volts or 115/ 230 volts, 60 cycle, 1 phase and 208-230/460 volts, 60 cycle, 3 phase.
31/2" SINK MOUNT 31/2" (8.89) SINK OPENING
SEAL – Teflon Lip Water Seal. WATER REQUIREMENT – 5 gallons of cold water per minute.
WASTE OUTLET – Rubber drain accepts 2” piping.
1 /2" NPT WATER INLET 81/2" (21.59)
15 13/16" (40.16)
2" DRAIN
/4" (1.91)
81/2" (21.59)
DUAL DIRECTION GRINDING – Designed to
ASSEMBLIES: (See Specification Sheet) CA – Cone Assembly with 12”, 15” or 18” Cone SA – Sink Assembly with 3 1⁄2” or 6 1⁄2” Sink Collar
MSS: (Non Reversing) MRSS: (Manual Reversing) ARSS-2: (Automatic Reversing) ARSS: (Automatic Reversing)
91/4" (23.50)
ADJUSTABLE LEG (OPTIONAL)
POWER ENTRANCE
10 9/16"(26.78) to 14 3/16"(35.99)
NOTE: Dimensions in parenthesis are in centimeters (Specifications subject to change without notice) Current specification details may be found online at www.salvajor.com
SAMPLE SPECIFICATION 200- CA-18
DISPOSER CONTROLS: (See Specification Sheet)
55/8" (14.29)
RESET BUTTON
operate in either direction. Direction of rotation can be controlled when installed with automatic reversing controls. Reversing rotation can double cutting teeth life.
LEG SUPPORT (Optional) – Single leg, adjustable.
65/8" (16.83) CUTOUT
3
13" (33.02)
55/8" (14.29)
61/2" SINK MOUNT
BEARINGS – Tapered roller (top) Sealed ball (bottom)
55/8" (14.29)
Model
Cone Size Assembly
ARSS Disposer Control
( 230/60/3 ) Electrical Specs.
◆ SPECIFY EXACT OPERATING VOLTAGE ◆
The Salvajor Company 1- 800 - SALVAJOR www.salvajor.com
4530 East 75th Terrace Kansas City, Missouri 64132-2081, USA (816) 363 - 1030 FAX: 1 - 800 - 832 - 9373 Email: [email protected] [email protected]
Manufacturers of Commercial Food Waste Disposing Systems since 1944
Printed in USA Form No.S200-9-BH
Salvajor CA: Cone Assembly FOR MODELS : 75 - 100 - 150 - 200 - 300 - 500 - 750
EQUIPMENT FURNISHED: A DISPOSER B 12", 15" or 18" CONE
12" CONE
15" CONE
C FIXED NOZZLE, 1⁄ 2" D VACUUM BREAKER E SOLENOID VALVE, 1⁄ 2" F SCRAP RING G FLOW CONTROL
18" CONE
H DISPOSER CONTROL
SAMPLE SPECIFICATION: 300-CA-18 ARSS (208/60/3) Model
Cone Size
OPTIONAL CONE COVER 12", 15", 18"
Disposer Control
Assembly
Electrical Specs.
◆ SPECIFY EXACT OPERATING VOLTAGE ◆ (Specifications subject to change without notice) Current specification details may be found online at www.salvajor.com
Cone Assembly TABLE CUT-OUT : 12" CONE–12 7⁄ 8" 15" CONE–15 7⁄ 8" 18" CONE–18 7⁄ 8"
D OPTIONAL CONE COVER
E
Models 75-200
Models 300-750
B F
2” Drain
C
G H
2” or 3” Drain
A
Leg Optional Leg Included
NOTE : INSTALL PER ALL APPLICABLE CODES
Salvajor CA: Cone Assembly D
E
T
A
I
L
S
A
N
D
D
I
M
E
N
S
I
O
N
S
FOR MODELS : 75 - 100 - 150 - 200 - 300 - 500 - 750 A B
1
/2" FIXED NOZZLE
55/8" (14.29)
61/2" (16.51)
1 /2" NPT WATER INLET
13" (33.02)
C
55/8" (14.29)
E
81/2" (21.59)
F
POWER ENTRANCE
D
RESET BUTTON
Adjustable leg optional on Models 75-200
32” (81.28) to 355/8" (90.49)
NOTE: Dimensions in parenthesis are in centimeters. Models 300-750 shown, 75-200 similar.
Dimensions
Cone Dimensions 12” Cone
15” Cone
18” Cone
A
14-7/8” (37.78)
17-7/8” (45.40)
20-7/8” (53.02)
B
12” (30.48)
15” (38.10)
18” (45.72)
Models 75-200
Models 300-750
C
8-1/2” (21.59)
13-13/16” (35.08)
D
7-5/16” (18.57)
6-5/16” (16.03)
E
14-1/8” (35.92)
19-7/16” (49.37)
F
2” Drain
2” or 3” Drain
The Salvajor Company 1- 800 - SALVAJOR www.salvajor.com
4530 East 75th Terrace Kansas City, Missouri 64132-2081, USA (816) 363 - 1030 FAX: 1 - 800 - 832 - 9373 Email: [email protected] [email protected]
Manufacturers of Commercial Food Waste Disposing Systems since 1944
Printed in USA Form No. CA-09-BH
Automatic Reversing Start Stop
Salvajor Model ARSS-2 Pre-Wired Automatic Reversing Control Panel for Disposer Models: 75 - 100 - 150 - 200 - 300 - 500 - 750
SPECIFICATIONS : ■ NEMA 4 Stainless Steel Watertight Enclosure ■ 24 Volt Safety Circuitry ■ Automatic Reversing Magnetic Contactors ■ Terminal Strip Connections ■ START/STOP Push Buttons
VOLTAGES AVAILABLE: 1- PHASE 115 VOLT, 208 -230 VOLT
AUTOMATIC REVERSING
3 - PHASE 208-230 VOLT, 460 VOLT ◆ SPECIFY EXACT OPERATING VOLTAGE ◆
■ #PP - MOUNTED 1⁄ 2" SOLENOID VALVE, FLOW CONTROL AND PRESSURE SWITCH
MODEL ARSS - 2 DISPOSER CONTROL is for use with Salvajor Models: 75 - 100 - 150 - 200 300 - 500 - 750
■ #980105 - MOUNTING BRACKET
WEIGHT: 21 LBS.
ACCESSORIES AVAILABLE: ■ #P - MOUNTED 1⁄ 2" SOLENOID VALVE AND FLOW CONTROL
■ #980104 - REMOTE MOUNTING BRACKET 12 3/8" (31.39)
■ #RSS - REMOTE START/STOP
10 3/16" (25.86)
(Specifications subject to change without notice) Current specification details may be found online at www.salvajor.com
7 1/2" (19.06) 6 5/8" (16.83)
3 1/2" (8.89) 12 3/8" (31.39) 13" (33.02)
NOTE: Dimensions in parenthesis are in centimeters
13 5/8" (34.59)
Typical Installation Diagram of Salvajor Model ARSS -2 Control Panel and Disposer Vacuum Breaker
Solenoid Valve with Flow Control
Optional: Globe Valve
Cone or Sink Cold Water Supply Line
ARSS -2 (P) ( PP )
with Optional ( P ) or ( PP )
ARSS -2 Control Panel Optional: Remote Start/Stop Electrical Supply
Control Panel may be mounted on wall or under table top with optional bracket.
Electrical Supply
Motor has overload protection.
NOTE : INSTALL PER ALL APPLICABLE CODES
#980104 Optional Mounting Bracket for Remote Start / Stop
#980105 Optional Mounting Bracket for ARSS-2 Control Panel 5 /8" (1.59)
12" (30.48)
13" (33.02)
6" (15.24)
16 1/8" (40.96)
5" (12.70) SLOTS 3 /8" x 1" (.95 x 2.54)
15" (38.10)
10 3/16" (25.88)
5" (12.70)
5 /8" (1.59)
8" 9 7/8" 11" (20.32) (25.08) (27.94) 4" (10.16)
# RSS Optional Remote Start / Stop
4 7/8" (12.40)
4 1/4" (10.77) 3 1/2" (8.89)
4" (10.16)
7 1/4" (18.39) 2 3/4" (6.99)
8 5/8" (21.89)
8" (20.32)
/8" HOLES
3
(0.95)
NOTE: Dimensions in parenthesis are in centimeters
Item Numbers for Ordering CONTROL MODEL
VOLTAGE
PHASE
ITEM NO.
ARSS-2
115 208 or 230 208 or 230 460
1 1 3 3
ARSS24 ARSS25 ARSS27 ARSS29
or
ARSS-2-P or
ARSS-2-PP
◆ SPECIFY EXACT OPERATING VOLTAGE ◆
The Salvajor Company 1- 800 - SALVAJOR www.salvajor.com
4530 East 75th Terrace Kansas City, Missouri 64132-2081, USA (816) 363 - 1030 FAX: 1 - 800 - 832 - 9373 Email: [email protected] [email protected]
Manufacturers of Commercial Food Waste Disposing Systems since 1944
Printed in USA Form No. ARSS-2-9-BH
