2100 Series
2100 Series
Magnapull Heavy Duty Magnetic Contact with Pull-Apart Cords Models: 2105-A, 2107-A
Installation Instructions
Mounting
Magnet cover
Mount the magnet section on the object to be protected. Once the magnet is installed, place the cover over the magnet and screw it to the surface. Use #10 screws to secure both units. Mount the cord section with clamps so the cord will pull straight out of the magnet housing when it reaches the end of the cord. Make sure it has the correct slack and loop so it will not hang up on anything as the protected object is moved.
3.44" 8.73 cm 0.75" 1.91 cm
2.50" 5.75 cm
1.25" 3.19 cm
1.63" 4.13 cm
Alternate mounting
Form A Form C
2.13" 5.40 cm
If the alternate mounting is used, make sure the alarm owner is warned that they could break the pull-apart if they do not release it before moving the protected object.
Lead functions
Model 2105-A, use black leads Model 2107-A Lead color Function Black Common White Closed Loop (NO) Red Open Loop (NC)
0.56" 1.43 cm
0.69" 1.75 cm
Switch 2.56" 6.50 cm
0.44" 1.11 cm
Movable portion of unit to be protected
Stationary post
To alarm control
Movable portion of unit to be protected
Ring or eye bolt on wall To alarm control
➜
CAUTION
Magnet
➜
Loop the cord through the object being protected or through a stationary object.
Ordering information Part Number
Loop Type
Electrical Configuration
Color Choices
Lead Type
2105-A
Closed
NO
Off-white, gray, or mohogany brown
3' stainless steel armored cable
2107-A
Open or Closed
SPDT
Gray
3' stainless steel armored cable
European Union Specification: 48 V AC/DC max., 0.5 A Form A: 2105-A Voltage: 100 V AC/DC max. Current: 0.5 A max. Power: 7.5 W max. Form C: 2107-A Voltage: 100 V AC/DC max. Current: 0.3 A max. Power: 3.0 W max.
g
UTC Fire & Security 12345 SW Leveton Drive Tualatin, OR 97062 503-692-4052 USA & Canada: 800-547-2556
Tech Support 800-648-7424 FaxBack: 800-483-2495 www.interlogix.com
PK-0732 Printed in Mexico
PK-0732 Rev E 01/13
Magnapull Heavy Duty Magnetic Contact with Pull-Apart Cords Models: 2105-A, 2107-A
Installation Instructions
Mounting
Magnet cover
Mount the magnet section on the object to be protected. Once the magnet is installed, place the cover over the magnet and screw it to the surface. Use #10 screws to secure both units. Mount the cord section with clamps so the cord will pull straight out of the magnet housing when it reaches the end of the cord. Make sure it has the correct slack and loop so it will not hang up on anything as the protected object is moved.
3.44" 8.73 cm 0.75" 1.91 cm
2.50" 5.75 cm
1.25" 3.19 cm
1.63" 4.13 cm
Alternate mounting
Form A Form C
2.13" 5.40 cm
If the alternate mounting is used, make sure the alarm owner is warned that they could break the pull-apart if they do not release it before moving the protected object.
Lead functions
Model 2105-A, use black leads Model 2107-A Lead color Function Black Common White Closed Loop (NO) Red Open Loop (NC)
0.56" 1.43 cm
0.69" 1.75 cm
Switch 2.56" 6.50 cm
0.44" 1.11 cm
Movable portion of unit to be protected
Stationary post
To alarm control
Movable portion of unit to be protected
Ring or eye bolt on wall To alarm control
➜
CAUTION
Magnet
➜
Loop the cord through the object being protected or through a stationary object.
Ordering information Part Number
Loop Type
Electrical Configuration
Color Choices
Lead Type
2105-A
Closed
NO
Off-white, gray, or mohogany brown
3' stainless steel armored cable
2107-A
Open or Closed
SPDT
Gray
3' stainless steel armored cable
European Union Specification: 48 V AC/DC max., 0.5 A Form A: 2105-A Voltage: 100 V AC/DC max. Current: 0.5 A max. Power: 7.5 W max. Form C: 2107-A Voltage: 100 V AC/DC max. Current: 0.3 A max. Power: 3.0 W max.
g
UTC Fire & Security 12345 SW Leveton Drive Tualatin, OR 97062 503-692-4052 USA & Canada: 800-547-2556
Tech Support 800-648-7424 FaxBack: 800-483-2495 www.interlogix.com
PK-0732 Printed in Mexico
PK-0732 Rev E 01/13
