26 Series
26 Series Serie 26 Série 26
Single Control Kitchen Faucet With Side Spray and Soap Dispenser Grifo Monomando Con Rociador Lateral y Dispensador De Jabón Robinet De Cuisine Avec Un Douchette
07-12-05 EO6835G
Copyright © 2005, Price Pfister, Inc.
A
29618-0200
COMPANY
ENGLISH
ENGLISH
Thank you for purchasing this Price Pfister product. All Price Pfister products are carefully engineered, and factory tested to provide long trouble-free use under normal conditions. This valve is easy to install using basic tools and our easy to follow illustrated instructions. If you have any questions regarding this product, call 1-800-Pfaucet (1-800-732-8238). 1 BEFORE PROCEEDING
5
WARNING: Read all the instructions completely before proceeding. Price Pfister recommends calling a professional if you are uncertain about installing this product!
This product should be installed in accordance with all local and state plumbing and building codes.
2 5C 5B 2 SHUT OFF WATER SUPPLY Locate water supply inlets and shut off the water supply valves. These are usually found under the sink or near the water meter. If you are replacing an existing faucet, remove the faucet from the sink and clean the sink surface thoroughly.
5A
3
3 TOOLS RECOMMENDED •Plumber's putty •Slotted screwdriver •Pliers •Adjustable wrench •Flashlight •Cloth Your installation may require new supply lines and / or shut-off valves or other additional tools.
5 SPOUT BODY INSTALLATION
Place Gasket (5A) under base of Spout Body (5B). From above sink, insert Mounting Shank (5C) through center hole of sink.
INSTALLATION
4
A
B
6
C
D
G
H
E
6C
J K
L
M
F
4 CHECKING THE CONTENTS OF THE BOX Upon opening the box, check to ensure that all of the following items are included: A Spout Body B Valve Body C Side Spray D Hose Guide with Flange E Base Ring F Gaskets G Plastic Washer & Locknut H Metal Washer J Long Nut K Soap Dispenser L Diverter M Clip If any of these items are missing, please contact Price Pfister Consumer Services at 1-800-Pfaucet (1-800-732-8238).
6A 6B
6 SECURING SPOUT BODY
2
From underneath sink, place large Plastic Washer (6A), and Locknut (6B) onto Mounting Shank (6C). Tighten faucet firmly to sink.
ENGLISH
7
9
9A
7B
ENGLISH
9C 7A
7D
9B
7C
7E 9D
7 CONTROL BODY INSTALLATION
9 GUIDE FLANGE & DISPENSER SHANK INSTALLATION
Hold Base Ring (7A) to Control Body (7B) and place Gasket (7C) under Base Ring (7A). From above sink, insert Threaded Shank (7D) and Flexible Tubing (7E) 7E) through side hole of sink. 7E
Insert Hose Guide (9A 9 ) through Hose Guide Flange (9B) and insert Soap Dispenser 9A Shank (9C) through Foam Gasket (9D) and into the sink holes. If desired, place a small bead of plumber’s putty to the underside of Hose Guide Flange (9B). (Both Guide Flange and Dispenser Shank can be placed in either hole).
8
10 8D
8A 10A
10B
8D 10C
10D 8B
8C 8 SECURING CONTROL BODY
From underneath sink, secure Control Body (8A) by placing Metal Washer (8B) and threading Long Nut (7/16 Hex.) (8C) onto Mounting Post (8D). Make sure that the bumps on Metal Washer (8B) are facing up. Tighten loosely, make sure Handle (8D) swings equally in both directions. Firmly hand tighten Long Nut (8C). Secure Long Nut (8C) not to exceed a 1/4 turn. Caution: Do not over tighten!
10E 10 SECURING HOSE GUIDE & SOAP DISPENSER SHANK
3
From underneath sink, secure Hose Guide (10A) and Soap Dispenser Shank (10B) by screwing Plastic Locknuts (10C) and (10D). Thread on Bottle (10E) 10E) to 10E Soap Dispenser Shank (10B). Hand tighten. Caution: do not over tighten!
ENGLISH
ENGLISH
11
13
11A
13D
13B 13A
13C
11B
13B
13A
13E
13E
13D 13C 13 HOSE ATTACHMENTS
11 SIDE SPRAY INSTALLATION
From underneath sink, push Outlet Hose Fiting (13A 13 ), firmly onto the Diverter 13A Receiving Tube (13B) until unable to push any further. Connect Spray Hose Fitting (13C) into Diverter Oulet Collet (13D) until unable to push any further. Pull out on connection Fittings (13A 13A & 13C). If the Fittings (13A & 13C) and the Inner 13A Collets (13E) E) separate slightly but do not pull off, the connections are secure. E
Insert Side Spray Hose (11A) through Hose Guide (11B).
12
14 14D
14B
14A
12B 12D
12C
14C 12A
12 DIVERTER INSTALLATION
14 SOAP DISPENSER INSTALLATION
Push Diverter Tee (12A) all the way up until completely seated onto Mountinhg Shank (12B). Slide Clip (12C) into Diverter Holes (12D), to secure unit.
4
Pour in liquid soap (not included) into Shank Orifice (14A). Insert Pump Mechanism (14B) into Soap Dispenser Shank (14C). Install Dispenser Head (14D) by pushing firmly onto Pump Mechanism (14B).
ENGLISH
15
ON
18B
HOT
ENGLISH
15C
18
COLD 18A
15B
15B
15A
15A
18 VALVE FUNCTION
By lifting Lever Handle (18A 8 ) up, the valve will be activated allowing water to 8A flow. The water flow will increase by continuing to lift up Lever Handle (18A 8 ). 8A By rotating Lever Handle (18A 8 ) counterclockwise, the water temperature will 8A decreased to fully cold. By rotating Lever Handle (18A 8 ) clockwise, the water 8A temperature will increased to fully hot.
15 WATER SUPPLY CONNECTIONS
Connect water Supply Lines (15A) to Faucet Inlets (15B). Hot water supply line goes to hot inlet fitting indicated by red tag (15C). (Supply lines not included). Follow manufacturer’s instructions when installing supply lines.
19 19A
16 19B
19A
16 UNIT START UP
Turn on hot and cold water supplies, and check for leaks above and below the sink.
FAUCET FUNCTIONS
19 SIDE SPRAY OPERATION
17
Side Spray (19A 9 ) can be pulled forward to spray water in any direction. To 9A activate the Side Spray (19A 9 ), press Toggle Button (19B) located on the back 9A of Side Spray (19A 9 ). 9A
20
20B
20A 17A
20 SOAP DISPENSER OPERATION
17 SPOUT FUNCTION
Spout (17A 7 ) can be rotated around the Faucet Body in any direction. 7A
5
To activate Soap Dispenser (20A 20 ), press Dispenser Head (20B) to spray liquid 20A soap.
MAINTENANCE AND CARE
ENGLISH
21
24
24F
ENGLISH
24C
21E
24A
24C
24B 21A
24D
21D 24F
21B 21C
24E
21 FLUSHING & AERATOR CLEANING
After installation is complete, remove Aerator Housing (21A). Turn Valve (21B) on and allow both hot and cold water to run for at least one minute each. While water is running, check for leaks. To clean the aerator, disassemble Aerator Housing (21A) by separating the Aerator Shell (21C), Basket (21D), and Washer (21E). 21E). Once parts have been cleaned, reassemble by reversing steps. 21E
24 HOSE REMOVAL
T remove hose attachments from Diverter Tee (24F), push on Connection To Fittings (24A 24A & 24B). Holding Plastic Collet (24C) in place, pull out on Connection Fittings (24A & 24B) until Hoses (24D 24D & 24E 24E) are free.
22 22B 22A
CAUTION: Maintenance
22C
DISASSEMBLY 1. Replacement parts may be available at the store where you purchased your faucet. 2. When replacement parts are not available, please write or call Price Pfister Consumer Service. 3. Always turn off water and relieve pressure before working on your faucet.
NOTE: Trim Care
22 HANDLE REMOVAL
Cleaning Instructions: For all Handles and decorative finishes, use only a soft damp cloth to clean and shine. Use of polish, detergents, abrasive cleaners, organic solvents or acid may cause damage. Use of other than a soft damp cloth will nullify our warranty! Special Trim: Trim products which contain Porcelain or other similar substance are not acceptable for public areas or Commercial use. Installation of Said Trim is at Users Risk!
Carefully pry off Handle Button ((22A) using a small screwdriver or blade. Using a 3/32” Allen wrench, loosen Set Screw (22B) and remove Handle (22C).
23 23A
23B
23C
1–800–PFAUCET (1–800–732–8238) For Toll-Free Pfaucet information call 1–800–PFAUCET (1–800–732–8238) or visit www.pricepfister.com
23 CARTRIDGE REPLACEMENT
Turn off water supplies and relieve pressure before working on your faucet. Remove handle (see figure 22). Remove the Dome Cap (23A) by unscrewing counterclockwise. Using pliers, unscrew the retainer ring (23B). Carefully remove the Cartridge (23C) by pulling it straight up and out. Reassemble valve by reversing steps.
6
• Installation Support • Care and Warranty Information
26 Series Serie 26 Série 26
920-055*
940-121*
951-023* 971-130
941-036* 951-026* 941-137*
920-054* 920-053*
931-900
950-006 941-005
974-035 931-002
950-590 941-081*
961-004*
950-099
950-200 951-027 950-590
960-023* 931-600 950-004
950-111
962-001
951-039
*
Letter Designates Finish
La Letra Indica el Terminado
La Lettre Designe La Fini
A
Polished Chrome
Cromo Pulido
Chrome Poli
S
Stainless Steel
Acero Inoxidable
Acier Inoxydable
19701 DaVinci Lake Forest, CA 92610 Phone: 1-800-Pfaucet www.pricepfister.com
A
COMPANY
Single Control Kitchen Faucet With Side Spray and Soap Dispenser Grifo Monomando Con Rociador Lateral y Dispensador De Jabón Robinet De Cuisine Avec Un Douchette
07-12-05 EO6835G
Copyright © 2005, Price Pfister, Inc.
A
29618-0200
COMPANY
ENGLISH
ENGLISH
Thank you for purchasing this Price Pfister product. All Price Pfister products are carefully engineered, and factory tested to provide long trouble-free use under normal conditions. This valve is easy to install using basic tools and our easy to follow illustrated instructions. If you have any questions regarding this product, call 1-800-Pfaucet (1-800-732-8238). 1 BEFORE PROCEEDING
5
WARNING: Read all the instructions completely before proceeding. Price Pfister recommends calling a professional if you are uncertain about installing this product!
This product should be installed in accordance with all local and state plumbing and building codes.
2 5C 5B 2 SHUT OFF WATER SUPPLY Locate water supply inlets and shut off the water supply valves. These are usually found under the sink or near the water meter. If you are replacing an existing faucet, remove the faucet from the sink and clean the sink surface thoroughly.
5A
3
3 TOOLS RECOMMENDED •Plumber's putty •Slotted screwdriver •Pliers •Adjustable wrench •Flashlight •Cloth Your installation may require new supply lines and / or shut-off valves or other additional tools.
5 SPOUT BODY INSTALLATION
Place Gasket (5A) under base of Spout Body (5B). From above sink, insert Mounting Shank (5C) through center hole of sink.
INSTALLATION
4
A
B
6
C
D
G
H
E
6C
J K
L
M
F
4 CHECKING THE CONTENTS OF THE BOX Upon opening the box, check to ensure that all of the following items are included: A Spout Body B Valve Body C Side Spray D Hose Guide with Flange E Base Ring F Gaskets G Plastic Washer & Locknut H Metal Washer J Long Nut K Soap Dispenser L Diverter M Clip If any of these items are missing, please contact Price Pfister Consumer Services at 1-800-Pfaucet (1-800-732-8238).
6A 6B
6 SECURING SPOUT BODY
2
From underneath sink, place large Plastic Washer (6A), and Locknut (6B) onto Mounting Shank (6C). Tighten faucet firmly to sink.
ENGLISH
7
9
9A
7B
ENGLISH
9C 7A
7D
9B
7C
7E 9D
7 CONTROL BODY INSTALLATION
9 GUIDE FLANGE & DISPENSER SHANK INSTALLATION
Hold Base Ring (7A) to Control Body (7B) and place Gasket (7C) under Base Ring (7A). From above sink, insert Threaded Shank (7D) and Flexible Tubing (7E) 7E) through side hole of sink. 7E
Insert Hose Guide (9A 9 ) through Hose Guide Flange (9B) and insert Soap Dispenser 9A Shank (9C) through Foam Gasket (9D) and into the sink holes. If desired, place a small bead of plumber’s putty to the underside of Hose Guide Flange (9B). (Both Guide Flange and Dispenser Shank can be placed in either hole).
8
10 8D
8A 10A
10B
8D 10C
10D 8B
8C 8 SECURING CONTROL BODY
From underneath sink, secure Control Body (8A) by placing Metal Washer (8B) and threading Long Nut (7/16 Hex.) (8C) onto Mounting Post (8D). Make sure that the bumps on Metal Washer (8B) are facing up. Tighten loosely, make sure Handle (8D) swings equally in both directions. Firmly hand tighten Long Nut (8C). Secure Long Nut (8C) not to exceed a 1/4 turn. Caution: Do not over tighten!
10E 10 SECURING HOSE GUIDE & SOAP DISPENSER SHANK
3
From underneath sink, secure Hose Guide (10A) and Soap Dispenser Shank (10B) by screwing Plastic Locknuts (10C) and (10D). Thread on Bottle (10E) 10E) to 10E Soap Dispenser Shank (10B). Hand tighten. Caution: do not over tighten!
ENGLISH
ENGLISH
11
13
11A
13D
13B 13A
13C
11B
13B
13A
13E
13E
13D 13C 13 HOSE ATTACHMENTS
11 SIDE SPRAY INSTALLATION
From underneath sink, push Outlet Hose Fiting (13A 13 ), firmly onto the Diverter 13A Receiving Tube (13B) until unable to push any further. Connect Spray Hose Fitting (13C) into Diverter Oulet Collet (13D) until unable to push any further. Pull out on connection Fittings (13A 13A & 13C). If the Fittings (13A & 13C) and the Inner 13A Collets (13E) E) separate slightly but do not pull off, the connections are secure. E
Insert Side Spray Hose (11A) through Hose Guide (11B).
12
14 14D
14B
14A
12B 12D
12C
14C 12A
12 DIVERTER INSTALLATION
14 SOAP DISPENSER INSTALLATION
Push Diverter Tee (12A) all the way up until completely seated onto Mountinhg Shank (12B). Slide Clip (12C) into Diverter Holes (12D), to secure unit.
4
Pour in liquid soap (not included) into Shank Orifice (14A). Insert Pump Mechanism (14B) into Soap Dispenser Shank (14C). Install Dispenser Head (14D) by pushing firmly onto Pump Mechanism (14B).
ENGLISH
15
ON
18B
HOT
ENGLISH
15C
18
COLD 18A
15B
15B
15A
15A
18 VALVE FUNCTION
By lifting Lever Handle (18A 8 ) up, the valve will be activated allowing water to 8A flow. The water flow will increase by continuing to lift up Lever Handle (18A 8 ). 8A By rotating Lever Handle (18A 8 ) counterclockwise, the water temperature will 8A decreased to fully cold. By rotating Lever Handle (18A 8 ) clockwise, the water 8A temperature will increased to fully hot.
15 WATER SUPPLY CONNECTIONS
Connect water Supply Lines (15A) to Faucet Inlets (15B). Hot water supply line goes to hot inlet fitting indicated by red tag (15C). (Supply lines not included). Follow manufacturer’s instructions when installing supply lines.
19 19A
16 19B
19A
16 UNIT START UP
Turn on hot and cold water supplies, and check for leaks above and below the sink.
FAUCET FUNCTIONS
19 SIDE SPRAY OPERATION
17
Side Spray (19A 9 ) can be pulled forward to spray water in any direction. To 9A activate the Side Spray (19A 9 ), press Toggle Button (19B) located on the back 9A of Side Spray (19A 9 ). 9A
20
20B
20A 17A
20 SOAP DISPENSER OPERATION
17 SPOUT FUNCTION
Spout (17A 7 ) can be rotated around the Faucet Body in any direction. 7A
5
To activate Soap Dispenser (20A 20 ), press Dispenser Head (20B) to spray liquid 20A soap.
MAINTENANCE AND CARE
ENGLISH
21
24
24F
ENGLISH
24C
21E
24A
24C
24B 21A
24D
21D 24F
21B 21C
24E
21 FLUSHING & AERATOR CLEANING
After installation is complete, remove Aerator Housing (21A). Turn Valve (21B) on and allow both hot and cold water to run for at least one minute each. While water is running, check for leaks. To clean the aerator, disassemble Aerator Housing (21A) by separating the Aerator Shell (21C), Basket (21D), and Washer (21E). 21E). Once parts have been cleaned, reassemble by reversing steps. 21E
24 HOSE REMOVAL
T remove hose attachments from Diverter Tee (24F), push on Connection To Fittings (24A 24A & 24B). Holding Plastic Collet (24C) in place, pull out on Connection Fittings (24A & 24B) until Hoses (24D 24D & 24E 24E) are free.
22 22B 22A
CAUTION: Maintenance
22C
DISASSEMBLY 1. Replacement parts may be available at the store where you purchased your faucet. 2. When replacement parts are not available, please write or call Price Pfister Consumer Service. 3. Always turn off water and relieve pressure before working on your faucet.
NOTE: Trim Care
22 HANDLE REMOVAL
Cleaning Instructions: For all Handles and decorative finishes, use only a soft damp cloth to clean and shine. Use of polish, detergents, abrasive cleaners, organic solvents or acid may cause damage. Use of other than a soft damp cloth will nullify our warranty! Special Trim: Trim products which contain Porcelain or other similar substance are not acceptable for public areas or Commercial use. Installation of Said Trim is at Users Risk!
Carefully pry off Handle Button ((22A) using a small screwdriver or blade. Using a 3/32” Allen wrench, loosen Set Screw (22B) and remove Handle (22C).
23 23A
23B
23C
1–800–PFAUCET (1–800–732–8238) For Toll-Free Pfaucet information call 1–800–PFAUCET (1–800–732–8238) or visit www.pricepfister.com
23 CARTRIDGE REPLACEMENT
Turn off water supplies and relieve pressure before working on your faucet. Remove handle (see figure 22). Remove the Dome Cap (23A) by unscrewing counterclockwise. Using pliers, unscrew the retainer ring (23B). Carefully remove the Cartridge (23C) by pulling it straight up and out. Reassemble valve by reversing steps.
6
• Installation Support • Care and Warranty Information
26 Series Serie 26 Série 26
920-055*
940-121*
951-023* 971-130
941-036* 951-026* 941-137*
920-054* 920-053*
931-900
950-006 941-005
974-035 931-002
950-590 941-081*
961-004*
950-099
950-200 951-027 950-590
960-023* 931-600 950-004
950-111
962-001
951-039
*
Letter Designates Finish
La Letra Indica el Terminado
La Lettre Designe La Fini
A
Polished Chrome
Cromo Pulido
Chrome Poli
S
Stainless Steel
Acero Inoxidable
Acier Inoxydable
19701 DaVinci Lake Forest, CA 92610 Phone: 1-800-Pfaucet www.pricepfister.com
A
COMPANY
