3-Rail Vinyl Ranch Fence (2 Pack)
3-Rail Vinyl Ranch Fence (2 Pack)
BOX CONTENTS Discover the Benefits of WamBam Traditional Vinyl Fence • Made of durable, low-maintenance white vinyl • Post design offers architectural character and flexibility when installing fence • Post design also offers 4-way universal directional capabilities (you do not need to order end, line, corner or specialized gate posts) • Limited Lifetime Warranty
.090in. wall thickness
Each Fence Panel Box Includes: • Post Caps (2) • Rails (6) • 3.5in. Stainless Steel Screws (12)
This Post & Cap Not Included (See note below)
• Posts (2) PLEASE NOTE: YOU WILL NEED TO PURCHASE ONE EXTRA POST & CAP TO COMPLETE EACH OF YOUR FENCE RUNS (Extra posts are sold as 2-packs)
For more information, contact us at 1 877-778-5733.
1
3-Rail Vinyl Ranch Fence (2 Pack)
PRODUCT SPECIFICATIONS This fence can be trimmed down both in width and height to accommodate custom applications. Top View
1.5in.
4.5in.
4.5in.
4.5in.
.090in. Wall Thickness
3.5in. Screw
8in.
8in.
51.5in. 50in.
72in.
Horizontal rail spacing can be adjusted freely to lower heights.
19.5in.
Ground
2in.
79.5in. 20.5in. 84in.
36in.
Concrete Footing
10in.
For more information, contact us at 1 877-778-5733.
2
3-Rail Vinyl Ranch Fence (2 Pack)
QUICKIE OVERVIEW • Prior to construction, check with your regulatory agency for special code requirements in your area. • Contact your utility supplier to locate and mark underground lines before excavation. • Sketch out the layout of your fence and calculate the number of panels, gates and posts required (order one extra post & cap to finish each fence run). • Careful planning & measuring of your fence is essential, as moving posts after the concrete sets is extremely difficult.
B
A
10in.
79.5in.
84in. o.c. 36in.
After stringing your fence line, dig your first post hole 10in. diameter x 36in. deep. Dig your second hole 84in. on center to your first hole, and so on. Dig only three or four holes at a time to ensure proper spacing.
C
1 - Add approximately 18in. of concrete to the bottom of the hole. 2 - Install posts straight and level. 3 - Add more concrete to within 2in. of ground level.
D
In the first fence section, slide 3 rails down the groove in your posts to the approximate position as illustrated on page 2 (rail spacing is flexible).
In the second fence section, slide 3 rails down the groove in your posts to the approximate position and repeat with any remaining fence sections.
For more information, contact us at 1 877-778-5733.
3
3-Rail Vinyl Ranch Fence (2 Pack)
SCREW RAILS TO POSTS
E
VERY IMPORTANT
Screws must be inserted straight and into the correct area of the post/rail as indicated.
CORRECT
Do not overtighten screws as it will cause the vinyl to dimple.
TOP VIEW
Line up and insert screws along edge of rounded corner radius as shown.
Fasten a 3.5 inch screw through the posts into the rails.
F WRONG
This will ensure that your fence rails will never fall out of your posts like traditional vinyl fence rails sometimes do.
WRONG
Screw has not been lined up nor inserted into the post correctly and has missed the rail entirely.
Repeat in each rail for a total of six per panel.
For more information, contact us at 1 877-778-5733.
4
3-Rail Vinyl Ranch Fence (2 Pack)
Most yards are relatively level and will allow for a fairly simple installation. If your yard is steeply pitched, or is very uneven, you may need to either slope, or stair-step your panels as illustrated below. Post height can be trimmed down as necessary.
SLOPED Ground
STAIR-STEPPED Ground
G
Vin y
lW eld 1
2
GLUE CAPS ON POSTS 1 - Put a small bead of vinyl glue or weld (purchased separately at hardware store) along the inside of the cap. 2 - Place the glued cap on the vinyl post and allow to set for 5-10 minutes.
For more information, contact us at 1 877-778-5733.
5
BOX CONTENTS Discover the Benefits of WamBam Traditional Vinyl Fence • Made of durable, low-maintenance white vinyl • Post design offers architectural character and flexibility when installing fence • Post design also offers 4-way universal directional capabilities (you do not need to order end, line, corner or specialized gate posts) • Limited Lifetime Warranty
.090in. wall thickness
Each Fence Panel Box Includes: • Post Caps (2) • Rails (6) • 3.5in. Stainless Steel Screws (12)
This Post & Cap Not Included (See note below)
• Posts (2) PLEASE NOTE: YOU WILL NEED TO PURCHASE ONE EXTRA POST & CAP TO COMPLETE EACH OF YOUR FENCE RUNS (Extra posts are sold as 2-packs)
For more information, contact us at 1 877-778-5733.
1
3-Rail Vinyl Ranch Fence (2 Pack)
PRODUCT SPECIFICATIONS This fence can be trimmed down both in width and height to accommodate custom applications. Top View
1.5in.
4.5in.
4.5in.
4.5in.
.090in. Wall Thickness
3.5in. Screw
8in.
8in.
51.5in. 50in.
72in.
Horizontal rail spacing can be adjusted freely to lower heights.
19.5in.
Ground
2in.
79.5in. 20.5in. 84in.
36in.
Concrete Footing
10in.
For more information, contact us at 1 877-778-5733.
2
3-Rail Vinyl Ranch Fence (2 Pack)
QUICKIE OVERVIEW • Prior to construction, check with your regulatory agency for special code requirements in your area. • Contact your utility supplier to locate and mark underground lines before excavation. • Sketch out the layout of your fence and calculate the number of panels, gates and posts required (order one extra post & cap to finish each fence run). • Careful planning & measuring of your fence is essential, as moving posts after the concrete sets is extremely difficult.
B
A
10in.
79.5in.
84in. o.c. 36in.
After stringing your fence line, dig your first post hole 10in. diameter x 36in. deep. Dig your second hole 84in. on center to your first hole, and so on. Dig only three or four holes at a time to ensure proper spacing.
C
1 - Add approximately 18in. of concrete to the bottom of the hole. 2 - Install posts straight and level. 3 - Add more concrete to within 2in. of ground level.
D
In the first fence section, slide 3 rails down the groove in your posts to the approximate position as illustrated on page 2 (rail spacing is flexible).
In the second fence section, slide 3 rails down the groove in your posts to the approximate position and repeat with any remaining fence sections.
For more information, contact us at 1 877-778-5733.
3
3-Rail Vinyl Ranch Fence (2 Pack)
SCREW RAILS TO POSTS
E
VERY IMPORTANT
Screws must be inserted straight and into the correct area of the post/rail as indicated.
CORRECT
Do not overtighten screws as it will cause the vinyl to dimple.
TOP VIEW
Line up and insert screws along edge of rounded corner radius as shown.
Fasten a 3.5 inch screw through the posts into the rails.
F WRONG
This will ensure that your fence rails will never fall out of your posts like traditional vinyl fence rails sometimes do.
WRONG
Screw has not been lined up nor inserted into the post correctly and has missed the rail entirely.
Repeat in each rail for a total of six per panel.
For more information, contact us at 1 877-778-5733.
4
3-Rail Vinyl Ranch Fence (2 Pack)
Most yards are relatively level and will allow for a fairly simple installation. If your yard is steeply pitched, or is very uneven, you may need to either slope, or stair-step your panels as illustrated below. Post height can be trimmed down as necessary.
SLOPED Ground
STAIR-STEPPED Ground
G
Vin y
lW eld 1
2
GLUE CAPS ON POSTS 1 - Put a small bead of vinyl glue or weld (purchased separately at hardware store) along the inside of the cap. 2 - Place the glued cap on the vinyl post and allow to set for 5-10 minutes.
For more information, contact us at 1 877-778-5733.
5
