3010 Waterstone Installation Instructions Contemporary Air Switch

AIR SWITCH INSTALLATION Contemporary Model # 3010 Traditional Model # 4010

BEFORE YOU BEGIN YOUR INSTALLATION: REQUIRED TOOLS:

Turn off water supply.

1.

1. Adjustable Wrench

PARTS INCLUDED: 2. Phillips Screwdriver

3.

2.

USM1375 Undersink Mounting Hardware (1-1/4”) F

4.

1-1/2” HOLE

C COUNTER OR SINK

E

B A

D

Remove clamp nut (A) and washer (B) from threaded shroud (C).

5.

Slide clear tubing (D) into tube fitting (E) at bottom of air switch.

6.

Fit air switch (F) through 1-1/2” hole on counter or sink. (No plumbers putty is required. O-ring seals base).

Slide washer and thread the clamp nut onto threaded shroud. Tighten nut snug to underside of sink or counter.

7.

GARBAGE DISPOSAL

G Securely tighten clamp screws (G).

J Slide other end of clear tubing (H) into tube fitting at bottom of control box (J).

41180 Raintree Court • Murrieta, CA 92562 1-888-304-0660 • 951-304-0520 www.waterstoneco.com

H Plug control box into undersink electrical outlet. Garbage disposal can be plugged into either dual outlet.

VEN-038-AS Rev. A