30KL Specs - Stonco Lighting
CATALOG NO. TYPE NO.
JOB NAME
Medium Base Lampholder ORDERING INFORMATION 41/16"
150L
43/4"
1"
FIXTURE 250W max. Lampholder
21/8"
23/4"
30KL
43/4"
1"
FIXTURE
21/8"
150W max. Lampholder
PRODUCT SPECIFICATIONS • Medium base lampholders are ideal for use over entrance ways, under eaves, over signs, any safety, security, temporary or recreational lighting. Areas requiring good color rendition, instant-on, dimming capability, easy installation and low initial cost. • Precision die-cast aluminum with heat sinks and ribbing to maximize heat dissipation. Aluminum finish. • Premium porcelain socket with double reinforced screw shell and spring loaded center contact.
ACCESSORIES 48A-Amber 4-3/4” diameter heat resistant PAR38 lens
48G-Green 4-3/4” diameter heat resistant PAR38 lens
48B-Blue 4-3/4” diameter heat resistant PAR38 lens
48R-Red 4-3/4” diameter heat resistant PAR38 lens
48C-Clear 4-3/4” diameter heat resistant PAR38 lens
47-Snap-On holder 80-Wire guard (150L only) 3350-Wire guard (30KL only)
150L medium base lampholder accepts PAR38 lamps up to 250W incandescent or Tungsten-Halogen. “Weather-seal” construction stays weather tight in any position, above or below horizontal. 30KL medium base lampholder accepts PAR38 lamps up to 150V. 30KL is capable of below horizontal aiming. See Lamp Holder Page for Lamp Data. UL Wet Location Listed. UL File Number: E57163
Stonco is a Philips company
• 1/2” NPT threaded adjustable arm, locknut preinstalled, prelubed to facilitate mounting. • Cast-in quadrants with serrated teeth lock unit in place once aimed. • Extra long pigtails for easy splicing.
TECHNICAL INFORMATION
Crescent/Stonco • 200 Franklin Square Drive • Somerset, NJ 08873 •
• 150L triple gasket consists of thick silicone rubber seal backed up by durable heat barrier and anchored in place with metal lock ring. 30KL is molded nordel.
• www.crescent-stonco.com 06/12
JOB NAME
Medium Base Lampholder ORDERING INFORMATION 41/16"
150L
43/4"
1"
FIXTURE 250W max. Lampholder
21/8"
23/4"
30KL
43/4"
1"
FIXTURE
21/8"
150W max. Lampholder
PRODUCT SPECIFICATIONS • Medium base lampholders are ideal for use over entrance ways, under eaves, over signs, any safety, security, temporary or recreational lighting. Areas requiring good color rendition, instant-on, dimming capability, easy installation and low initial cost. • Precision die-cast aluminum with heat sinks and ribbing to maximize heat dissipation. Aluminum finish. • Premium porcelain socket with double reinforced screw shell and spring loaded center contact.
ACCESSORIES 48A-Amber 4-3/4” diameter heat resistant PAR38 lens
48G-Green 4-3/4” diameter heat resistant PAR38 lens
48B-Blue 4-3/4” diameter heat resistant PAR38 lens
48R-Red 4-3/4” diameter heat resistant PAR38 lens
48C-Clear 4-3/4” diameter heat resistant PAR38 lens
47-Snap-On holder 80-Wire guard (150L only) 3350-Wire guard (30KL only)
150L medium base lampholder accepts PAR38 lamps up to 250W incandescent or Tungsten-Halogen. “Weather-seal” construction stays weather tight in any position, above or below horizontal. 30KL medium base lampholder accepts PAR38 lamps up to 150V. 30KL is capable of below horizontal aiming. See Lamp Holder Page for Lamp Data. UL Wet Location Listed. UL File Number: E57163
Stonco is a Philips company
• 1/2” NPT threaded adjustable arm, locknut preinstalled, prelubed to facilitate mounting. • Cast-in quadrants with serrated teeth lock unit in place once aimed. • Extra long pigtails for easy splicing.
TECHNICAL INFORMATION
Crescent/Stonco • 200 Franklin Square Drive • Somerset, NJ 08873 •
• 150L triple gasket consists of thick silicone rubber seal backed up by durable heat barrier and anchored in place with metal lock ring. 30KL is molded nordel.
• www.crescent-stonco.com 06/12
