(31,32) Adirondack Dining & Bar Chair's Tete-A-Tete ... - Seaside Casual
Instruction Revision: B
SEASIDE CASUAL FURNITURE ENVIRO
WOOD
(31,32) Adirondack Dining & Bar Chair’s Tete-A-Tete rev. A
Assembly Instructions Step One: Set Up READ ENTIRE INSTRUCTIONS BEFORE BEGINNING! Carefully remove contents from box. Make sure that all parts and hardware are included. The Tete-A-Tete (31 & 32) comes Fully Assembled.
Step Two: Chair Placement Place two Adirondack Chairs next to each other, facing the same direction, with about 8 inches between them at the front of the Arms. Then have about 2 feet between them at the back of the Arms.
Step Three: Placing Tete-A-Tete on Chairs Place Tete-A-Tete facing up on top of the arms, with smaller end to the front and bigger end in the back. Adjust Chairs until the Arms on the Chairs are within the Arm Slots underneath the Tete-A-Tete.
Step Four: Locking In Place Underneath Tete-A-Tete next to each Arm Slot is a turning locking piece. Turn Piece 90 degrees to lock Tete-A-Tete in place turning piece 90 degrees may require a little pressure to get to 90 degrees. Do not use any foreign object to secure the locking piece only turn and secure locking piece by hand. Repeat Process for other side.
WARRANTY QUESTIONS OR COMMENTS PLEASE CALL TOLL FREE AT 1-800-809-3114 1
SEASIDE CASUAL FURNITURE ENVIRO
WOOD
(31,32) Adirondack Dining & Bar Chair’s Tete-A-Tete rev. A
Assembly Instructions Step One: Set Up READ ENTIRE INSTRUCTIONS BEFORE BEGINNING! Carefully remove contents from box. Make sure that all parts and hardware are included. The Tete-A-Tete (31 & 32) comes Fully Assembled.
Step Two: Chair Placement Place two Adirondack Chairs next to each other, facing the same direction, with about 8 inches between them at the front of the Arms. Then have about 2 feet between them at the back of the Arms.
Step Three: Placing Tete-A-Tete on Chairs Place Tete-A-Tete facing up on top of the arms, with smaller end to the front and bigger end in the back. Adjust Chairs until the Arms on the Chairs are within the Arm Slots underneath the Tete-A-Tete.
Step Four: Locking In Place Underneath Tete-A-Tete next to each Arm Slot is a turning locking piece. Turn Piece 90 degrees to lock Tete-A-Tete in place turning piece 90 degrees may require a little pressure to get to 90 degrees. Do not use any foreign object to secure the locking piece only turn and secure locking piece by hand. Repeat Process for other side.
WARRANTY QUESTIONS OR COMMENTS PLEASE CALL TOLL FREE AT 1-800-809-3114 1
