350 & 350c boost valve and sleeve

350 & 350C ®

BOOST VALVE AND SLEEVE H I G H

P E R F O R M A N C E

T R A N S M I S S I O N

P A R T S

Part No.

35754-01K

OEM Retaining Pin

1 Boost Valve Sleeve 1 Reverse & Modulator Boost Valve 1 Intermediate Boost Valve

Reverse & Modulator Boost Valve Intermediate Boost Valve

OEM Pressure Regulator Valve OEM Spring

Boost Valve Sleeve

INSTRUCTIONS 1. Remove retaining pin holding boost valve and sleeve (do not discard retaining pin). 2. Discard the worn boost valve sleeve, reverse and modulator boost valve and the intermediate boost valve. 3. Lubricate all pieces of the replacement kit. 4. Carefully push the sleeve assembly into the valve body (only deep enough to install the retaining pin), open end toward the springs. 5. Install the retaining pin.

©2004 Sonnax ®

sonnax • 800/843-2600 • 802/463-9722 • fax: 802/463-4059 • www.sonnax.com • [email protected]

35754-01K 11-02-07

Page 1