3D Puzzle Bunny - Thingiverse

3D Puzzle Bunny Construction Manual

By: Corben33

Step 1 Print All Parts

Follow instructions tap on thingiverse for printing specs.

Step 2 Select these 5 parts and then put together as shown in the picture. Glue may be needed to hold everything firmly together.

Step 3 Select these 4 parts and then put together as shown in the picture. Glue may be needed to hold everything firmly together.

Holds everything together

Step 4 Select these 9 parts and then put together as shown in the picture. Glue may be needed to hold everything firmly together.

6

1 2

7

3 4

8

5

9

1 2 3 4 6 7 8 9

5

Step 5 Select this 1 part and then put together as shown in the picture. Glue may be needed to hold everything firmly together.

This part is the “backbone”

Step 6 Select these 2 parts and then put together as shown in the picture. Glue may be needed to hold everything firmly together.

Goes on bottom

Goes 2nd from bottom

Step 7 Select these 5 parts and then put together as shown in the picture. Glue may be needed to hold everything firmly together.

1 Tail 2 3 4

1 Tail 2 3 4

Step 8 Select these 2 parts and then put together as shown in the picture. Glue may be needed to hold everything firmly together.

Ribs

Step 9 Select these 10 parts and then put together as shown in the picture. Glue may be needed to hold everything firmly together.

Goes on inside

Goes on outside

Fits in 3 gaps

Step 10 Select these 10 parts and then put together as shown in the picture. Glue may be needed to hold everything firmly together.

Large leg half goes on inside Fit in 3 small gaps above feet. Order is up to you Small leg half goes on outside

Feet go on very bottom

Large leg half

Small leg half

Feet

Step 11 Add the ears and you’re done!