3L Champ® H.I.D. Luminaires

Report 3 Downloads 24 Views
Champ® H.I.D. Luminaires

3L

Accessories

VMV, LMV, DMV, VMV High Wattage & N2MV Series Globes

Reflectors

Dome – Krydon® material G54

G24

Lamp Watts

Luminaire Series

Type

35–150 50–175 50–250 200–400 50–175

LMV VMV DMV VMV N2MV

Heat/impact Heat/impact Heat/impact Heat/impact Heat/impact

30° Angle – Krydon material

G303

Cat. # resistant resistant resistant resistant resistant

G54 G24 G303 G303 G303

Lamp Watts

Luminaire Series

Dome Cat. #

Angle Cat. #

35–150 50–175 50–250 200–400 50–175

LMV VMV DMV VMV N2MV

RD636 RD70 RD739 RD739 RD739

RA636 RA70 RA739 RA739 RA740

Reflector / Lens Guards

Etched Alzak aluminum reflector/tempered glass lens

P50 – use with G54 globe

P21 – use with G24 globe

P33 – use with G303 globe

Lamp Watts

Luminaire Series

Type

Cat. #

200–400 70–250

VMV DMV

Reflector/Lens Reflector/Lens

GRD4 GRD4

3L

Globes – Teflon Coated Teflon coated for increased shatter protection Lamp Watts

Luminaire Series

Cat. #

50–175 50–175

VMV DMV

G24 S808 G303 S808

Alzak is a registered trademark of Alcoa. Teflon is a registered trademark of E.I. DuPont Co.

P23 – use with refractors Lamp Watts

Luminaire Series

Type

Cat. #

35–150 50–175 50–250 200–400 Refractors 50–175

LMV VMV DMV VMV All N2MV

Copper-free aluminum Copper-free aluminum Stainless steel Stainless steel Stainless steel Stainless steel

P50 P21 P33 P33 P23 P33

1022

www.crouse-hinds.com

US: 1-866-764-5454

CAN: 1-800-265-0502

Copyright© 2013 Eaton’s Crouse-Hinds Business

Champ® H.I.D. Luminaires

3L

Accessories

VMV, LMV, DMV, VMV High Wattage & N2MV Series Refractors

Safety Lighting Options Description Suffix Quartz Auxiliary Lamp QTZ The quartz auxiliary lamp comes to full brightness instantly and remains lit until the H.I.D. lamp attains 60–70% of full illumination. Quartz auxiliary lamps can be used with all DMV, VMV and VMV High Wattage series Champ® luminaires. Use for non-hazardous applications ONLY. VMV luminaires (50–175W) ordered with this option must use large glass refractor optics, not compact refractors.

R2, R5, PR2, PR3, PR5

GR302, GR303, GR305

Luminaire Series

I.E.S. Type

Glass Cat. #

Plastic (100W max. non-hazardous)* Cat. #

50–175

VMV

II III V

R2 R3 R5

PR2 PR3 PR5

200–400

VMV

II III V

GR302 GR305 GR305

50–250

DMV

II III V

GR302 GR303 GR305

50–175

N2MV

Lamp Watts

100W single ended lamp – Q100CL/DC, Q100DC or 100Q/CL/DC NOT furnished Instant Restrike Factory installed instant restrike device will restart a hot High Pressure Sodium lamp after a momentary power interruption, without the typical delay for cooling. For use in 50–150W "LX" HPS luminaires. IR For use in 50–100W "LX" HPS luminaires.

PGR302 PGR303 PGR305

TIR

Ballast-Gard™ BG Ballast-Gard starter cut-out switch prevents starter pulsing after a time delay of approximately two minutes if the lamp fails to start. For use in 50–400 watt HPS luminaires only.

*Not available with VMV fluorescent.

I.E.S. Distribution Curves

3L

Type I

Type II

Type III

Type V

Luminaire Series

I.E.S. Type

Glass Cat. #

VMV

I III V

G241 G243 G245 P241

Compact Refractors

Lamp Watts 50–175

Optional stainless steel wire guard www.crouse-hinds.com

US: 1-866-764-5454

CAN: 1-800-265-0502

Copyright© 2013 Eaton’s Crouse-Hinds Business

1023