4322 2403 Mob
Phone: 02/ 4322 2339 Fax: 02/ 4322 2403 Mob: 04 14 87 87 11 Email: [email protected] Web: www.panthertrikes.com ABN: 71 108 441 621 Dealers License No. 20536 Unit 7/ 379 Manns Road,
West Gosford
2250
N.S.W.
Australia
PECK SERIES CNC LATHE
Options: 6-Station NC Turret, Hydraulic Chuck (solid or hollow), Hydraulic Tailstock, 3-step Speed Change (manual or auto)
Specifications Max .Swing over bed Max. Work piece Length Spindle taper Chuck size Thru-hole of spindle
Spindle speeds (12steps) Tailstock center sleeve travel Tailstock center sleeve taper Repeatability error X/Z rapid traverse Spindle motor
PECK6140
PECK6150
400mm 500mm 1000/1500/2000/3000mm MT6(Φ90 1:20) C6 (D8) A-52mm / B-80mm 21-1500rpm(I 162-1500 II 66-660 III 21-210) 150mm MT5 0.01mm 3/6m/min 7.5kw
Packing dimensions (L×W×H mm) for 1000 Packing dimensions (L×W×H mm) for 1500 Packing dimensions (L×W×H mm) for 2000 Packing dimensions (L×W×H mm) for 3000
2750×1550×1700mm 3250×1550×1700mm 3710×1550×1700mm 4710×1550×1700mm
Length
G.W. / N.W.
G.W. / N.W.
Weight(kg) for 1000 Weight(kg) for 1500 Weight(kg) for 2000 Weight(kg) for 3000
2200/2900 2300/3150 2700/3350 3500/4100
2240/3000 2350/3200 2740/3400 3600/4200
CNC System Options: -GSK 980TA1 / KND100Ti-D (China) -SIEMENS (Germany) -FANUC Oi-Mate TD (Japan)
Standard Accessories Frequency Spindle Manual Chuck 4-Station NC Turret Full-splash Guard Steeples speed change
1 Panther CNC Lathe PECK/A 6140 With 52mm Spindle bore and 1000mm between centers, four post Tool changer, Manual 200mm Diameter chuck and Fanuc Oi-Mate TD or SINUMERIK 828D Controller AU $ 31,650.00- Plus GST
Terms & Conditions: 12 months warranty on parts. Manufacturer warrants the products to be free from defects in material and workmanship for 12 months from the date of shipment to the original purchaser only. We will send parts (FREE) for your replacement. If the machine has worst running problems, we will send engineer to your factory for maintenance. NOTE: All tooling is considered wear items which not covered under machine warranty. Training & Setup: Additional Machine should be placed in position and main power connected prior to setup and training at customer site. Customer should pay for travel plus related expenses (may include hotel, airfare, and rental car etc.) We also welcome customer send people here for training how to operate machines. Lead time: 3~5 days, and customer should pay all relative expenses by themselves.
Price are variable based on exchange rate quoted = $ Quotation Valid for 30 Days and subject to terms and conditions Delivery Approximately 8-14 weeks from receiving deposit and order Deposit 40% Rest before shipment Freight Ex West Gosford Date 18.08.2015
Hoping This Quote meets your requirements and we can be of assistance in future. Josef Furrer Director
West Gosford
2250
N.S.W.
Australia
PECK SERIES CNC LATHE
Options: 6-Station NC Turret, Hydraulic Chuck (solid or hollow), Hydraulic Tailstock, 3-step Speed Change (manual or auto)
Specifications Max .Swing over bed Max. Work piece Length Spindle taper Chuck size Thru-hole of spindle
Spindle speeds (12steps) Tailstock center sleeve travel Tailstock center sleeve taper Repeatability error X/Z rapid traverse Spindle motor
PECK6140
PECK6150
400mm 500mm 1000/1500/2000/3000mm MT6(Φ90 1:20) C6 (D8) A-52mm / B-80mm 21-1500rpm(I 162-1500 II 66-660 III 21-210) 150mm MT5 0.01mm 3/6m/min 7.5kw
Packing dimensions (L×W×H mm) for 1000 Packing dimensions (L×W×H mm) for 1500 Packing dimensions (L×W×H mm) for 2000 Packing dimensions (L×W×H mm) for 3000
2750×1550×1700mm 3250×1550×1700mm 3710×1550×1700mm 4710×1550×1700mm
Length
G.W. / N.W.
G.W. / N.W.
Weight(kg) for 1000 Weight(kg) for 1500 Weight(kg) for 2000 Weight(kg) for 3000
2200/2900 2300/3150 2700/3350 3500/4100
2240/3000 2350/3200 2740/3400 3600/4200
CNC System Options: -GSK 980TA1 / KND100Ti-D (China) -SIEMENS (Germany) -FANUC Oi-Mate TD (Japan)
Standard Accessories Frequency Spindle Manual Chuck 4-Station NC Turret Full-splash Guard Steeples speed change
1 Panther CNC Lathe PECK/A 6140 With 52mm Spindle bore and 1000mm between centers, four post Tool changer, Manual 200mm Diameter chuck and Fanuc Oi-Mate TD or SINUMERIK 828D Controller AU $ 31,650.00- Plus GST
Terms & Conditions: 12 months warranty on parts. Manufacturer warrants the products to be free from defects in material and workmanship for 12 months from the date of shipment to the original purchaser only. We will send parts (FREE) for your replacement. If the machine has worst running problems, we will send engineer to your factory for maintenance. NOTE: All tooling is considered wear items which not covered under machine warranty. Training & Setup: Additional Machine should be placed in position and main power connected prior to setup and training at customer site. Customer should pay for travel plus related expenses (may include hotel, airfare, and rental car etc.) We also welcome customer send people here for training how to operate machines. Lead time: 3~5 days, and customer should pay all relative expenses by themselves.
Price are variable based on exchange rate quoted = $ Quotation Valid for 30 Days and subject to terms and conditions Delivery Approximately 8-14 weeks from receiving deposit and order Deposit 40% Rest before shipment Freight Ex West Gosford Date 18.08.2015
Hoping This Quote meets your requirements and we can be of assistance in future. Josef Furrer Director
