5500 Series - Dynalock
DynaLock For Life
TM
SM
5500 Series Power Supply
5500 Series
Medium Duty Power Supply
Specifications MECHANICAL Enclosure: Weight: Color:
4” x 12” x 15” Steel 14 lbs. (average) add approx. 6 lbs. per battery Off-white
• • • • •
ELECTRICAL Input Power: Output Voltage: Output Current: Input Fuse: Output Fuses: DB Fuses: Basic Outputs: Module Outputs:
1A @ 115VAC, 50-60 Hz 12VDC - nominal 13.8V 24VDC - nominal 27.6V 3A @ 12VDC / 2A @ 24VDC 1A 3AG Slo Blo Battery/DC Output - 5A 3AG Slo Blo Self-resetting when powered down for 2 minutes Capacity 10AWG Capacity 14 AWG
NYC MEA #23-92-E
Accessories • 6000 Series Exit Controls Push-buttons in a variety of switching configurations and exit sensor bars. • 7000 Series Access Controls Keyswitches accept most mortise cylinders for controlled access. Rugged digital entry keypads. • 8000 Series Consoles Desktop, slope front and rack mount fabricated to customer specifications.
LOCKING DEVICE
OUTPUT VOLTAGE
MAX LOAD
1300
2511
2011/3000
2268-10
3006
3101B
12VDC
3A
3
5
6
4
5
3
24VDC
2A
4
7
8
5
6
3
Recommended Wire Gauge Load Current At 12V 100 150 200 250 300 400 500 750 1000
0.25a
18 18 16 16 16 14 14 12 -
0.5a
18 16 14 14 12 12 -
0.75a
16 14 12 12 12 -
1a
14 12 12 -
Load Current At 24V 1.25a
14 12 -
1.5a
12 12 -
2a
12 -
DYNALOCK CORPORATION 705 EMMETT STREET / PO BOX 2728 BRISTOL, CT 06011-2728 PHONE: 877-DYNALOCK / FAX: 860-585-0338 E-MAIL: [email protected] WEBSITE: WWW.DYNALOCK.COM 10/07
Wire run (ft)
100 150 200 250 300 400 500 750 1000
0.25a
18 18 18 18 18 18 16 14 14
0.5a
18 18 18 16 16 14 14 12 -
Description
Standard Features
DynaLock 5500 Series Power Supply offers the reliability of solid state electronics, versatility of field selectable voltage output, and flexibility of modular design. Use direct power output or choose one of the available expansion boards.
• Filtered and Regulated Voltage Output • Field Selectable 12 or 24 VDC. • Built-in Charging Circuit • Hinged Cover Enclosure: Off-white finish with conduit knockouts and optional key lock cover. Dimensions 4”x12”x15”. • Lifetime Warranty: Made in the USA by DynaLock, with over 20 years experience in the manufacture of electromagnetic locks.
Specify a distribution board (DB5 / DB10) for 5 or 10 individual fused outputs. Add individual control modules for switched outputs, with or without time delay. Specify the interlock logic board (ILB) option for a 4 DPDT relay board. Optional fire alarm control (FAC) relay provides integration with fire or emergency alarm system. A battery charging circuit is standard. Specify 4 or 7 amp hours, and 12 or 24 volts for battery backup.
Lock Capacity
Wire run (ft)
3A @ 12VDC / 2A @ 24VDC Up To 10 Fused Outputs Fire Alarm Tie-In Battery Back-Up Lifetime Warranty
0.75a
18 16 16 14 14 12 12 -
1a
18 16 14 14 12 12 -
1.25a
16 14 14 12 12 -
Featuring
DynaLife
®
Lifetime Warranty
1.5a
16 14 12 12 12 -
2a
14 12 12 12 -
The DynaLock 5500 Power Supply provides clean, filtered, and regulated DC voltage. Specify for all electronic devices, including access controls, electromagnetic locks, and CCTV.
Optional Features • Anti-Tamper Switch (ATS) indicates unauthorized opening of the enclosure cover. • Key Lock (KLC) for enclosure cover. • Fire Alarm Control (FAC) tie point. • Power Cord (PC) for use with typical wall plug in lieu of hard-wired 120 VAC. • Individual Fused Outputs: 5 (DB5) or 10 (DB10) output distribution board. • Controlled Outputs: Individual Control Modules (CM/ CMTD) offer the flexibility of selectable inputs (NO/NC), fail-safe or fail-secure outputs, and adjustable time delay.
LIFE SAFETY PRODUCTS
F U L LY I N T E G R AT E D S E C U R I T Y S Y S T E M S Electromagnetic Locks Controls Power Supplies
DynaLock For Life
TM
SM
Options
CONTROL JUMPER
ANTI-TAMPER SWITCH - Signals opening of enclosure cover (SPST, NO contacts) BATTERY BACK-UP - 4 AH @ 12VDC, 1 battery BATTERY BACK-UP - 7 AH @ 12VDC, 1 battery BATTERY BACK-UP - 4 AH @ 24VDC, 2 batteries BATTERY BACK-UP - 7 AH @ 24VDC, 2 batteries CABLE KIT - For third party batteries (included at no charge with all BBU options) CONTROL MODULE - Plug in allowing control over individual outputs (requires DB5 or DB10) CONTROL MODULE with TIME DELAY - Plug in, 0-80 second relock delay (requires DB5 or DB10) DISTRIBUTION BOARD - 5 zone fused, accepts any combination of up to 5 CMs or CMTDs DISTRIBUTION BOARD - 10 zone fused, accepts any combination of up to 10 CMs or CMTDs FIRE ALARM CONTROL - Plug in for connection to fire alarm system (One per supply) FIRE ALARM CONTROL, MANUAL RESET - Latches upon fire alarm (Requires FAC option) INTERLOCK LOGIC BOARD - Four DPDT relays KEY LOCKED COVER - Includes 2 keys POWER CORD - Six foot, pre-connected, 3-wire plug-in line cord
CM1
ALL RELAYS ARE SHOWN IN THE NON ENERGIZED STATE. 1
2
3
4
5
6
1
2
3
4
5
6
5500 COMPONENTS C NC NO C NC NO
C NC NO C NC NO
RELAY 1
RELAY 2
PRIMARY CIRCUIT BOARD
1
D. C. INPUTS 2
3
CUT JUMPER FOR 24V OPERATION ON RELAY # 4
BOARD P.N. 500258 REV. B
4
5 6 1 2 ( - ) +1 +2 +3 +4
3
4
5
C NC NO C NCCUT NOJUMPERC NC NO C NCCUT NOJUMPER FOR 24V OPERATION ON RELAY # 1
RELAY 3
CUT JUMPER FOR 24V OPERATION ON RELAY # 3
FOR 24V OPERATION ON RELAY #2
RELAY 4
ALL RELAYS ARE SHOWN IN THE NON ENERGIZED STATE. 1
2
3
4
5
6
1
2
3
4
5
CUT JUMPER FOR 24V OPERATION ON RELAY # 4
BOARD P.N. 500258 REV. B
6
1
2
3
4
5
6
1
2
3
4
5
C NC NO C NC NO
C NC NO C NC NO
C NC NO C NC NO
C NC NO C NC NO
RELAY 1
RELAY 2
RELAY 3
RELAY 4
CM6
CM7
CM8
CM9
CM10
FAC Module Fire Alarm Control. Plugs into the primary circuit board. When a signal is received from an emergency panel it instantly unlocks all locking devices driven by the 5500 Power Supply. The module will automatically reset when the emergency signal is restored or may be wired to require a manual reset (FACMR).
TRANSFORMER
6
CM5
SELF-RESTORING FUSE
INTERLOCK LOGIC BOARD DynaLock Corp. P.N. 500259
6
CM4
3
CUT JUMPER FOR 24V OPERATION ON RELAY # 3
CM3
2
CUT JUMPER FOR 24V OPERATION ON RELAY #2
CM2
Two distribution boards, 5 and 10 outputs respectively, are available to provide fused individual tie points, to facilitate lock wiring. The output fuses are self-restoring by correcting the overload and disconnecting the line voltage for 2 minutes. A control jumper at each station selects unswitched voltage or the use of a Control Module.
INDIVIDUAL FUSED DC OUTPUTS
( - ) +1 +2 +3 +4
CUT JUMPER FOR 24V OPERATION ON RELAY # 1
DB5 / DB10 Distribution Board
DYNALOCK CORP. PN500174 PSDSBORD
INTERLOCK LOGIC BOARD DynaLock Corp. P.N. 500259
D. C. INPUTS
DB10
INPUT FROM POWER SUPPLY
1
ATS BBU1-4 BBU1-7 BBU2-4 BBU2-7 CAB CM CMTD DB5 DB10 FAC FACMR ILB KLC PC
LINE OUT
TIME DELAY ADJUSTMENT 1
POWER IN
2
3
1
2
3
4
VOLTAGE OUTPUT SELECTOR SWITCH
5
2
3
4
5
1
2
3
4
CM & CMTD Modules
5
Control Module and Control Module with Time Delay. Plug-in isolation relay board to switch lock power. Includes auxiliary relay contacts to signal other devices such as CCTV or interlocks. The CMTD module offers the same features with the addition of an adjustable 0-80 second delay on relock.
DB5/DB10 DISTRIBUTION BOARD
DYNALOCK CORP. PN500180 PSIOBORD
INPUT FROM POWER SUPPLY
LINE INPUT FUSE
LINE FUSE
DYNALOCK CORP. PN500174 PSDSBORD
24 1
1
1
1
2
2
2
2
2
DYNALOCK CORP. PN500176 PSCMBORD
3 4
4
5
3
4
5
4
3
4
3
3
1
1
POWER OUTPUT
12
1 LINE
DYNALOCK CORP. PN500176 PSCMBORD 2
DYNALOCK CORP. PN500176 PSCMBORD
2 5
5
5
NEUT
3
3 GND
AC LINE INPUT
1
4
LINE INPUT 110 VAC 60 HZ
F2
F3 CM1
BATTERY INPUT
BATTERY CONNECTION DC OUTPUT FUSE
CM2
CM3
CM4
CM5
CM6
CM7
CM8
CM9
CM10
CONTROL MODULE
ILB Board
INDIVIDUAL FUSED DC OUTPUTS
BATTERY FUSE
( - ) +1 +2 +3 +4
Interlock Logic Board. Four DPDT relays for control of interlocks. Each relay has an individual trigger which can be set for 12 or 24VDC input.
BASIC DC OUTPUT POWER ON LED FAC MODULE PLUG-IN
1
2
3
4
5
2
1
2
3
4
5
INTERLOCK LOGIC BOARD DynaLock Corp. P.N. 500259
D. C. INPUTS
3
CUT JUMPER FOR 24V OPERATION ON RELAY # 1
CUT JUMPER FOR 24V OPERATION ON RELAY #2
CUT JUMPER FOR 24V OPERATION ON RELAY # 3
ALL RELAYS ARE SHOWN IN THE NON ENERGIZED STATE. 1
2
3
4
5
6
1
2
3
4
5
CUT JUMPER FOR 24V OPERATION ON RELAY # 4
BOARD P.N. 500258 REV. B
6
1
2
3
4
5
6
1
2
3
4
5
6
C NC NO C NC NO
C NC NO C NC NO
C NC NO C NC NO
C NC NO C NC NO
RELAY 1
RELAY 2
RELAY 3
RELAY 4
DynaLock For Life
TM
SM
Options
CONTROL JUMPER
ANTI-TAMPER SWITCH - Signals opening of enclosure cover (SPST, NO contacts) BATTERY BACK-UP - 4 AH @ 12VDC, 1 battery BATTERY BACK-UP - 7 AH @ 12VDC, 1 battery BATTERY BACK-UP - 4 AH @ 24VDC, 2 batteries BATTERY BACK-UP - 7 AH @ 24VDC, 2 batteries CABLE KIT - For third party batteries (included at no charge with all BBU options) CONTROL MODULE - Plug in allowing control over individual outputs (requires DB5 or DB10) CONTROL MODULE with TIME DELAY - Plug in, 0-80 second relock delay (requires DB5 or DB10) DISTRIBUTION BOARD - 5 zone fused, accepts any combination of up to 5 CMs or CMTDs DISTRIBUTION BOARD - 10 zone fused, accepts any combination of up to 10 CMs or CMTDs FIRE ALARM CONTROL - Plug in for connection to fire alarm system (One per supply) FIRE ALARM CONTROL, MANUAL RESET - Latches upon fire alarm (Requires FAC option) INTERLOCK LOGIC BOARD - Four DPDT relays KEY LOCKED COVER - Includes 2 keys POWER CORD - Six foot, pre-connected, 3-wire plug-in line cord
CM1
ALL RELAYS ARE SHOWN IN THE NON ENERGIZED STATE. 1
2
3
4
5
6
1
2
3
4
5
6
5500 COMPONENTS C NC NO C NC NO
C NC NO C NC NO
RELAY 1
RELAY 2
PRIMARY CIRCUIT BOARD
1
D. C. INPUTS 2
3
CUT JUMPER FOR 24V OPERATION ON RELAY # 4
BOARD P.N. 500258 REV. B
4
5 6 1 2 ( - ) +1 +2 +3 +4
3
4
5
C NC NO C NCCUT NOJUMPERC NC NO C NCCUT NOJUMPER FOR 24V OPERATION ON RELAY # 1
RELAY 3
CUT JUMPER FOR 24V OPERATION ON RELAY # 3
FOR 24V OPERATION ON RELAY #2
RELAY 4
ALL RELAYS ARE SHOWN IN THE NON ENERGIZED STATE. 1
2
3
4
5
6
1
2
3
4
5
CUT JUMPER FOR 24V OPERATION ON RELAY # 4
BOARD P.N. 500258 REV. B
6
1
2
3
4
5
6
1
2
3
4
5
C NC NO C NC NO
C NC NO C NC NO
C NC NO C NC NO
C NC NO C NC NO
RELAY 1
RELAY 2
RELAY 3
RELAY 4
CM6
CM7
CM8
CM9
CM10
FAC Module Fire Alarm Control. Plugs into the primary circuit board. When a signal is received from an emergency panel it instantly unlocks all locking devices driven by the 5500 Power Supply. The module will automatically reset when the emergency signal is restored or may be wired to require a manual reset (FACMR).
TRANSFORMER
6
CM5
SELF-RESTORING FUSE
INTERLOCK LOGIC BOARD DynaLock Corp. P.N. 500259
6
CM4
3
CUT JUMPER FOR 24V OPERATION ON RELAY # 3
CM3
2
CUT JUMPER FOR 24V OPERATION ON RELAY #2
CM2
Two distribution boards, 5 and 10 outputs respectively, are available to provide fused individual tie points, to facilitate lock wiring. The output fuses are self-restoring by correcting the overload and disconnecting the line voltage for 2 minutes. A control jumper at each station selects unswitched voltage or the use of a Control Module.
INDIVIDUAL FUSED DC OUTPUTS
( - ) +1 +2 +3 +4
CUT JUMPER FOR 24V OPERATION ON RELAY # 1
DB5 / DB10 Distribution Board
DYNALOCK CORP. PN500174 PSDSBORD
INTERLOCK LOGIC BOARD DynaLock Corp. P.N. 500259
D. C. INPUTS
DB10
INPUT FROM POWER SUPPLY
1
ATS BBU1-4 BBU1-7 BBU2-4 BBU2-7 CAB CM CMTD DB5 DB10 FAC FACMR ILB KLC PC
LINE OUT
TIME DELAY ADJUSTMENT 1
POWER IN
2
3
1
2
3
4
VOLTAGE OUTPUT SELECTOR SWITCH
5
2
3
4
5
1
2
3
4
CM & CMTD Modules
5
Control Module and Control Module with Time Delay. Plug-in isolation relay board to switch lock power. Includes auxiliary relay contacts to signal other devices such as CCTV or interlocks. The CMTD module offers the same features with the addition of an adjustable 0-80 second delay on relock.
DB5/DB10 DISTRIBUTION BOARD
DYNALOCK CORP. PN500180 PSIOBORD
INPUT FROM POWER SUPPLY
LINE INPUT FUSE
LINE FUSE
DYNALOCK CORP. PN500174 PSDSBORD
24 1
1
1
1
2
2
2
2
2
DYNALOCK CORP. PN500176 PSCMBORD
3 4
4
5
3
4
5
4
3
4
3
3
1
1
POWER OUTPUT
12
1 LINE
DYNALOCK CORP. PN500176 PSCMBORD 2
DYNALOCK CORP. PN500176 PSCMBORD
2 5
5
5
NEUT
3
3 GND
AC LINE INPUT
1
4
LINE INPUT 110 VAC 60 HZ
F2
F3 CM1
BATTERY INPUT
BATTERY CONNECTION DC OUTPUT FUSE
CM2
CM3
CM4
CM5
CM6
CM7
CM8
CM9
CM10
CONTROL MODULE
ILB Board
INDIVIDUAL FUSED DC OUTPUTS
BATTERY FUSE
( - ) +1 +2 +3 +4
Interlock Logic Board. Four DPDT relays for control of interlocks. Each relay has an individual trigger which can be set for 12 or 24VDC input.
BASIC DC OUTPUT POWER ON LED FAC MODULE PLUG-IN
1
2
3
4
5
2
1
2
3
4
5
INTERLOCK LOGIC BOARD DynaLock Corp. P.N. 500259
D. C. INPUTS
3
CUT JUMPER FOR 24V OPERATION ON RELAY # 1
CUT JUMPER FOR 24V OPERATION ON RELAY #2
CUT JUMPER FOR 24V OPERATION ON RELAY # 3
ALL RELAYS ARE SHOWN IN THE NON ENERGIZED STATE. 1
2
3
4
5
6
1
2
3
4
5
CUT JUMPER FOR 24V OPERATION ON RELAY # 4
BOARD P.N. 500258 REV. B
6
1
2
3
4
5
6
1
2
3
4
5
6
C NC NO C NC NO
C NC NO C NC NO
C NC NO C NC NO
C NC NO C NC NO
RELAY 1
RELAY 2
RELAY 3
RELAY 4
DynaLock For Life
TM
SM
5500 Series Power Supply
5500 Series
Medium Duty Power Supply
Specifications MECHANICAL Enclosure: Weight: Color:
4” x 12” x 15” Steel 14 lbs. (average) add approx. 6 lbs. per battery Off-white
• • • • •
ELECTRICAL Input Power: Output Voltage: Output Current: Input Fuse: Output Fuses: DB Fuses: Basic Outputs: Module Outputs:
1A @ 115VAC, 50-60 Hz 12VDC - nominal 13.8V 24VDC - nominal 27.6V 3A @ 12VDC / 2A @ 24VDC 1A 3AG Slo Blo Battery/DC Output - 5A 3AG Slo Blo Self-resetting when powered down for 2 minutes Capacity 10AWG Capacity 14 AWG
NYC MEA #23-92-E
Accessories • 6000 Series Exit Controls Push-buttons in a variety of switching configurations and exit sensor bars. • 7000 Series Access Controls Keyswitches accept most mortise cylinders for controlled access. Rugged digital entry keypads. • 8000 Series Consoles Desktop, slope front and rack mount fabricated to customer specifications.
LOCKING DEVICE
OUTPUT VOLTAGE
MAX LOAD
1300
2511
2011/3000
2268-10
3006
3101B
12VDC
3A
3
5
6
4
5
3
24VDC
2A
4
7
8
5
6
3
Recommended Wire Gauge Load Current At 12V 100 150 200 250 300 400 500 750 1000
0.25a
18 18 16 16 16 14 14 12 -
0.5a
18 16 14 14 12 12 -
0.75a
16 14 12 12 12 -
1a
14 12 12 -
Load Current At 24V 1.25a
14 12 -
1.5a
12 12 -
2a
12 -
DYNALOCK CORPORATION 705 EMMETT STREET / PO BOX 2728 BRISTOL, CT 06011-2728 PHONE: 877-DYNALOCK / FAX: 860-585-0338 E-MAIL: [email protected] WEBSITE: WWW.DYNALOCK.COM 10/07
Wire run (ft)
100 150 200 250 300 400 500 750 1000
0.25a
18 18 18 18 18 18 16 14 14
0.5a
18 18 18 16 16 14 14 12 -
Description
Standard Features
DynaLock 5500 Series Power Supply offers the reliability of solid state electronics, versatility of field selectable voltage output, and flexibility of modular design. Use direct power output or choose one of the available expansion boards.
• Filtered and Regulated Voltage Output • Field Selectable 12 or 24 VDC. • Built-in Charging Circuit • Hinged Cover Enclosure: Off-white finish with conduit knockouts and optional key lock cover. Dimensions 4”x12”x15”. • Lifetime Warranty: Made in the USA by DynaLock, with over 20 years experience in the manufacture of electromagnetic locks.
Specify a distribution board (DB5 / DB10) for 5 or 10 individual fused outputs. Add individual control modules for switched outputs, with or without time delay. Specify the interlock logic board (ILB) option for a 4 DPDT relay board. Optional fire alarm control (FAC) relay provides integration with fire or emergency alarm system. A battery charging circuit is standard. Specify 4 or 7 amp hours, and 12 or 24 volts for battery backup.
Lock Capacity
Wire run (ft)
3A @ 12VDC / 2A @ 24VDC Up To 10 Fused Outputs Fire Alarm Tie-In Battery Back-Up Lifetime Warranty
0.75a
18 16 16 14 14 12 12 -
1a
18 16 14 14 12 12 -
1.25a
16 14 14 12 12 -
Featuring
DynaLife
®
Lifetime Warranty
1.5a
16 14 12 12 12 -
2a
14 12 12 12 -
The DynaLock 5500 Power Supply provides clean, filtered, and regulated DC voltage. Specify for all electronic devices, including access controls, electromagnetic locks, and CCTV.
Optional Features • Anti-Tamper Switch (ATS) indicates unauthorized opening of the enclosure cover. • Key Lock (KLC) for enclosure cover. • Fire Alarm Control (FAC) tie point. • Power Cord (PC) for use with typical wall plug in lieu of hard-wired 120 VAC. • Individual Fused Outputs: 5 (DB5) or 10 (DB10) output distribution board. • Controlled Outputs: Individual Control Modules (CM/ CMTD) offer the flexibility of selectable inputs (NO/NC), fail-safe or fail-secure outputs, and adjustable time delay.
LIFE SAFETY PRODUCTS
F U L LY I N T E G R AT E D S E C U R I T Y S Y S T E M S Electromagnetic Locks Controls Power Supplies
TM
SM
5500 Series Power Supply
5500 Series
Medium Duty Power Supply
Specifications MECHANICAL Enclosure: Weight: Color:
4” x 12” x 15” Steel 14 lbs. (average) add approx. 6 lbs. per battery Off-white
• • • • •
ELECTRICAL Input Power: Output Voltage: Output Current: Input Fuse: Output Fuses: DB Fuses: Basic Outputs: Module Outputs:
1A @ 115VAC, 50-60 Hz 12VDC - nominal 13.8V 24VDC - nominal 27.6V 3A @ 12VDC / 2A @ 24VDC 1A 3AG Slo Blo Battery/DC Output - 5A 3AG Slo Blo Self-resetting when powered down for 2 minutes Capacity 10AWG Capacity 14 AWG
NYC MEA #23-92-E
Accessories • 6000 Series Exit Controls Push-buttons in a variety of switching configurations and exit sensor bars. • 7000 Series Access Controls Keyswitches accept most mortise cylinders for controlled access. Rugged digital entry keypads. • 8000 Series Consoles Desktop, slope front and rack mount fabricated to customer specifications.
LOCKING DEVICE
OUTPUT VOLTAGE
MAX LOAD
1300
2511
2011/3000
2268-10
3006
3101B
12VDC
3A
3
5
6
4
5
3
24VDC
2A
4
7
8
5
6
3
Recommended Wire Gauge Load Current At 12V 100 150 200 250 300 400 500 750 1000
0.25a
18 18 16 16 16 14 14 12 -
0.5a
18 16 14 14 12 12 -
0.75a
16 14 12 12 12 -
1a
14 12 12 -
Load Current At 24V 1.25a
14 12 -
1.5a
12 12 -
2a
12 -
DYNALOCK CORPORATION 705 EMMETT STREET / PO BOX 2728 BRISTOL, CT 06011-2728 PHONE: 877-DYNALOCK / FAX: 860-585-0338 E-MAIL: [email protected] WEBSITE: WWW.DYNALOCK.COM 10/07
Wire run (ft)
100 150 200 250 300 400 500 750 1000
0.25a
18 18 18 18 18 18 16 14 14
0.5a
18 18 18 16 16 14 14 12 -
Description
Standard Features
DynaLock 5500 Series Power Supply offers the reliability of solid state electronics, versatility of field selectable voltage output, and flexibility of modular design. Use direct power output or choose one of the available expansion boards.
• Filtered and Regulated Voltage Output • Field Selectable 12 or 24 VDC. • Built-in Charging Circuit • Hinged Cover Enclosure: Off-white finish with conduit knockouts and optional key lock cover. Dimensions 4”x12”x15”. • Lifetime Warranty: Made in the USA by DynaLock, with over 20 years experience in the manufacture of electromagnetic locks.
Specify a distribution board (DB5 / DB10) for 5 or 10 individual fused outputs. Add individual control modules for switched outputs, with or without time delay. Specify the interlock logic board (ILB) option for a 4 DPDT relay board. Optional fire alarm control (FAC) relay provides integration with fire or emergency alarm system. A battery charging circuit is standard. Specify 4 or 7 amp hours, and 12 or 24 volts for battery backup.
Lock Capacity
Wire run (ft)
3A @ 12VDC / 2A @ 24VDC Up To 10 Fused Outputs Fire Alarm Tie-In Battery Back-Up Lifetime Warranty
0.75a
18 16 16 14 14 12 12 -
1a
18 16 14 14 12 12 -
1.25a
16 14 14 12 12 -
Featuring
DynaLife
®
Lifetime Warranty
1.5a
16 14 12 12 12 -
2a
14 12 12 12 -
The DynaLock 5500 Power Supply provides clean, filtered, and regulated DC voltage. Specify for all electronic devices, including access controls, electromagnetic locks, and CCTV.
Optional Features • Anti-Tamper Switch (ATS) indicates unauthorized opening of the enclosure cover. • Key Lock (KLC) for enclosure cover. • Fire Alarm Control (FAC) tie point. • Power Cord (PC) for use with typical wall plug in lieu of hard-wired 120 VAC. • Individual Fused Outputs: 5 (DB5) or 10 (DB10) output distribution board. • Controlled Outputs: Individual Control Modules (CM/ CMTD) offer the flexibility of selectable inputs (NO/NC), fail-safe or fail-secure outputs, and adjustable time delay.
LIFE SAFETY PRODUCTS
F U L LY I N T E G R AT E D S E C U R I T Y S Y S T E M S Electromagnetic Locks Controls Power Supplies
DynaLock For Life
TM
SM
Options
CONTROL JUMPER
ANTI-TAMPER SWITCH - Signals opening of enclosure cover (SPST, NO contacts) BATTERY BACK-UP - 4 AH @ 12VDC, 1 battery BATTERY BACK-UP - 7 AH @ 12VDC, 1 battery BATTERY BACK-UP - 4 AH @ 24VDC, 2 batteries BATTERY BACK-UP - 7 AH @ 24VDC, 2 batteries CABLE KIT - For third party batteries (included at no charge with all BBU options) CONTROL MODULE - Plug in allowing control over individual outputs (requires DB5 or DB10) CONTROL MODULE with TIME DELAY - Plug in, 0-80 second relock delay (requires DB5 or DB10) DISTRIBUTION BOARD - 5 zone fused, accepts any combination of up to 5 CMs or CMTDs DISTRIBUTION BOARD - 10 zone fused, accepts any combination of up to 10 CMs or CMTDs FIRE ALARM CONTROL - Plug in for connection to fire alarm system (One per supply) FIRE ALARM CONTROL, MANUAL RESET - Latches upon fire alarm (Requires FAC option) INTERLOCK LOGIC BOARD - Four DPDT relays KEY LOCKED COVER - Includes 2 keys POWER CORD - Six foot, pre-connected, 3-wire plug-in line cord
CM1
ALL RELAYS ARE SHOWN IN THE NON ENERGIZED STATE. 1
2
3
4
5
6
1
2
3
4
5
6
5500 COMPONENTS C NC NO C NC NO
C NC NO C NC NO
RELAY 1
RELAY 2
PRIMARY CIRCUIT BOARD
1
D. C. INPUTS 2
3
CUT JUMPER FOR 24V OPERATION ON RELAY # 4
BOARD P.N. 500258 REV. B
4
5 6 1 2 ( - ) +1 +2 +3 +4
3
4
5
C NC NO C NCCUT NOJUMPERC NC NO C NCCUT NOJUMPER FOR 24V OPERATION ON RELAY # 1
RELAY 3
CUT JUMPER FOR 24V OPERATION ON RELAY # 3
FOR 24V OPERATION ON RELAY #2
RELAY 4
ALL RELAYS ARE SHOWN IN THE NON ENERGIZED STATE. 1
2
3
4
5
6
1
2
3
4
5
CUT JUMPER FOR 24V OPERATION ON RELAY # 4
BOARD P.N. 500258 REV. B
6
1
2
3
4
5
6
1
2
3
4
5
C NC NO C NC NO
C NC NO C NC NO
C NC NO C NC NO
C NC NO C NC NO
RELAY 1
RELAY 2
RELAY 3
RELAY 4
CM6
CM7
CM8
CM9
CM10
FAC Module Fire Alarm Control. Plugs into the primary circuit board. When a signal is received from an emergency panel it instantly unlocks all locking devices driven by the 5500 Power Supply. The module will automatically reset when the emergency signal is restored or may be wired to require a manual reset (FACMR).
TRANSFORMER
6
CM5
SELF-RESTORING FUSE
INTERLOCK LOGIC BOARD DynaLock Corp. P.N. 500259
6
CM4
3
CUT JUMPER FOR 24V OPERATION ON RELAY # 3
CM3
2
CUT JUMPER FOR 24V OPERATION ON RELAY #2
CM2
Two distribution boards, 5 and 10 outputs respectively, are available to provide fused individual tie points, to facilitate lock wiring. The output fuses are self-restoring by correcting the overload and disconnecting the line voltage for 2 minutes. A control jumper at each station selects unswitched voltage or the use of a Control Module.
INDIVIDUAL FUSED DC OUTPUTS
( - ) +1 +2 +3 +4
CUT JUMPER FOR 24V OPERATION ON RELAY # 1
DB5 / DB10 Distribution Board
DYNALOCK CORP. PN500174 PSDSBORD
INTERLOCK LOGIC BOARD DynaLock Corp. P.N. 500259
D. C. INPUTS
DB10
INPUT FROM POWER SUPPLY
1
ATS BBU1-4 BBU1-7 BBU2-4 BBU2-7 CAB CM CMTD DB5 DB10 FAC FACMR ILB KLC PC
LINE OUT
TIME DELAY ADJUSTMENT 1
POWER IN
2
3
1
2
3
4
VOLTAGE OUTPUT SELECTOR SWITCH
5
2
3
4
5
1
2
3
4
CM & CMTD Modules
5
Control Module and Control Module with Time Delay. Plug-in isolation relay board to switch lock power. Includes auxiliary relay contacts to signal other devices such as CCTV or interlocks. The CMTD module offers the same features with the addition of an adjustable 0-80 second delay on relock.
DB5/DB10 DISTRIBUTION BOARD
DYNALOCK CORP. PN500180 PSIOBORD
INPUT FROM POWER SUPPLY
LINE INPUT FUSE
LINE FUSE
DYNALOCK CORP. PN500174 PSDSBORD
24 1
1
1
1
2
2
2
2
2
DYNALOCK CORP. PN500176 PSCMBORD
3 4
4
5
3
4
5
4
3
4
3
3
1
1
POWER OUTPUT
12
1 LINE
DYNALOCK CORP. PN500176 PSCMBORD 2
DYNALOCK CORP. PN500176 PSCMBORD
2 5
5
5
NEUT
3
3 GND
AC LINE INPUT
1
4
LINE INPUT 110 VAC 60 HZ
F2
F3 CM1
BATTERY INPUT
BATTERY CONNECTION DC OUTPUT FUSE
CM2
CM3
CM4
CM5
CM6
CM7
CM8
CM9
CM10
CONTROL MODULE
ILB Board
INDIVIDUAL FUSED DC OUTPUTS
BATTERY FUSE
( - ) +1 +2 +3 +4
Interlock Logic Board. Four DPDT relays for control of interlocks. Each relay has an individual trigger which can be set for 12 or 24VDC input.
BASIC DC OUTPUT POWER ON LED FAC MODULE PLUG-IN
1
2
3
4
5
2
1
2
3
4
5
INTERLOCK LOGIC BOARD DynaLock Corp. P.N. 500259
D. C. INPUTS
3
CUT JUMPER FOR 24V OPERATION ON RELAY # 1
CUT JUMPER FOR 24V OPERATION ON RELAY #2
CUT JUMPER FOR 24V OPERATION ON RELAY # 3
ALL RELAYS ARE SHOWN IN THE NON ENERGIZED STATE. 1
2
3
4
5
6
1
2
3
4
5
CUT JUMPER FOR 24V OPERATION ON RELAY # 4
BOARD P.N. 500258 REV. B
6
1
2
3
4
5
6
1
2
3
4
5
6
C NC NO C NC NO
C NC NO C NC NO
C NC NO C NC NO
C NC NO C NC NO
RELAY 1
RELAY 2
RELAY 3
RELAY 4
DynaLock For Life
TM
SM
Options
CONTROL JUMPER
ANTI-TAMPER SWITCH - Signals opening of enclosure cover (SPST, NO contacts) BATTERY BACK-UP - 4 AH @ 12VDC, 1 battery BATTERY BACK-UP - 7 AH @ 12VDC, 1 battery BATTERY BACK-UP - 4 AH @ 24VDC, 2 batteries BATTERY BACK-UP - 7 AH @ 24VDC, 2 batteries CABLE KIT - For third party batteries (included at no charge with all BBU options) CONTROL MODULE - Plug in allowing control over individual outputs (requires DB5 or DB10) CONTROL MODULE with TIME DELAY - Plug in, 0-80 second relock delay (requires DB5 or DB10) DISTRIBUTION BOARD - 5 zone fused, accepts any combination of up to 5 CMs or CMTDs DISTRIBUTION BOARD - 10 zone fused, accepts any combination of up to 10 CMs or CMTDs FIRE ALARM CONTROL - Plug in for connection to fire alarm system (One per supply) FIRE ALARM CONTROL, MANUAL RESET - Latches upon fire alarm (Requires FAC option) INTERLOCK LOGIC BOARD - Four DPDT relays KEY LOCKED COVER - Includes 2 keys POWER CORD - Six foot, pre-connected, 3-wire plug-in line cord
CM1
ALL RELAYS ARE SHOWN IN THE NON ENERGIZED STATE. 1
2
3
4
5
6
1
2
3
4
5
6
5500 COMPONENTS C NC NO C NC NO
C NC NO C NC NO
RELAY 1
RELAY 2
PRIMARY CIRCUIT BOARD
1
D. C. INPUTS 2
3
CUT JUMPER FOR 24V OPERATION ON RELAY # 4
BOARD P.N. 500258 REV. B
4
5 6 1 2 ( - ) +1 +2 +3 +4
3
4
5
C NC NO C NCCUT NOJUMPERC NC NO C NCCUT NOJUMPER FOR 24V OPERATION ON RELAY # 1
RELAY 3
CUT JUMPER FOR 24V OPERATION ON RELAY # 3
FOR 24V OPERATION ON RELAY #2
RELAY 4
ALL RELAYS ARE SHOWN IN THE NON ENERGIZED STATE. 1
2
3
4
5
6
1
2
3
4
5
CUT JUMPER FOR 24V OPERATION ON RELAY # 4
BOARD P.N. 500258 REV. B
6
1
2
3
4
5
6
1
2
3
4
5
C NC NO C NC NO
C NC NO C NC NO
C NC NO C NC NO
C NC NO C NC NO
RELAY 1
RELAY 2
RELAY 3
RELAY 4
CM6
CM7
CM8
CM9
CM10
FAC Module Fire Alarm Control. Plugs into the primary circuit board. When a signal is received from an emergency panel it instantly unlocks all locking devices driven by the 5500 Power Supply. The module will automatically reset when the emergency signal is restored or may be wired to require a manual reset (FACMR).
TRANSFORMER
6
CM5
SELF-RESTORING FUSE
INTERLOCK LOGIC BOARD DynaLock Corp. P.N. 500259
6
CM4
3
CUT JUMPER FOR 24V OPERATION ON RELAY # 3
CM3
2
CUT JUMPER FOR 24V OPERATION ON RELAY #2
CM2
Two distribution boards, 5 and 10 outputs respectively, are available to provide fused individual tie points, to facilitate lock wiring. The output fuses are self-restoring by correcting the overload and disconnecting the line voltage for 2 minutes. A control jumper at each station selects unswitched voltage or the use of a Control Module.
INDIVIDUAL FUSED DC OUTPUTS
( - ) +1 +2 +3 +4
CUT JUMPER FOR 24V OPERATION ON RELAY # 1
DB5 / DB10 Distribution Board
DYNALOCK CORP. PN500174 PSDSBORD
INTERLOCK LOGIC BOARD DynaLock Corp. P.N. 500259
D. C. INPUTS
DB10
INPUT FROM POWER SUPPLY
1
ATS BBU1-4 BBU1-7 BBU2-4 BBU2-7 CAB CM CMTD DB5 DB10 FAC FACMR ILB KLC PC
LINE OUT
TIME DELAY ADJUSTMENT 1
POWER IN
2
3
1
2
3
4
VOLTAGE OUTPUT SELECTOR SWITCH
5
2
3
4
5
1
2
3
4
CM & CMTD Modules
5
Control Module and Control Module with Time Delay. Plug-in isolation relay board to switch lock power. Includes auxiliary relay contacts to signal other devices such as CCTV or interlocks. The CMTD module offers the same features with the addition of an adjustable 0-80 second delay on relock.
DB5/DB10 DISTRIBUTION BOARD
DYNALOCK CORP. PN500180 PSIOBORD
INPUT FROM POWER SUPPLY
LINE INPUT FUSE
LINE FUSE
DYNALOCK CORP. PN500174 PSDSBORD
24 1
1
1
1
2
2
2
2
2
DYNALOCK CORP. PN500176 PSCMBORD
3 4
4
5
3
4
5
4
3
4
3
3
1
1
POWER OUTPUT
12
1 LINE
DYNALOCK CORP. PN500176 PSCMBORD 2
DYNALOCK CORP. PN500176 PSCMBORD
2 5
5
5
NEUT
3
3 GND
AC LINE INPUT
1
4
LINE INPUT 110 VAC 60 HZ
F2
F3 CM1
BATTERY INPUT
BATTERY CONNECTION DC OUTPUT FUSE
CM2
CM3
CM4
CM5
CM6
CM7
CM8
CM9
CM10
CONTROL MODULE
ILB Board
INDIVIDUAL FUSED DC OUTPUTS
BATTERY FUSE
( - ) +1 +2 +3 +4
Interlock Logic Board. Four DPDT relays for control of interlocks. Each relay has an individual trigger which can be set for 12 or 24VDC input.
BASIC DC OUTPUT POWER ON LED FAC MODULE PLUG-IN
1
2
3
4
5
2
1
2
3
4
5
INTERLOCK LOGIC BOARD DynaLock Corp. P.N. 500259
D. C. INPUTS
3
CUT JUMPER FOR 24V OPERATION ON RELAY # 1
CUT JUMPER FOR 24V OPERATION ON RELAY #2
CUT JUMPER FOR 24V OPERATION ON RELAY # 3
ALL RELAYS ARE SHOWN IN THE NON ENERGIZED STATE. 1
2
3
4
5
6
1
2
3
4
5
CUT JUMPER FOR 24V OPERATION ON RELAY # 4
BOARD P.N. 500258 REV. B
6
1
2
3
4
5
6
1
2
3
4
5
6
C NC NO C NC NO
C NC NO C NC NO
C NC NO C NC NO
C NC NO C NC NO
RELAY 1
RELAY 2
RELAY 3
RELAY 4
DynaLock For Life
TM
SM
5500 Series Power Supply
5500 Series
Medium Duty Power Supply
Specifications MECHANICAL Enclosure: Weight: Color:
4” x 12” x 15” Steel 14 lbs. (average) add approx. 6 lbs. per battery Off-white
• • • • •
ELECTRICAL Input Power: Output Voltage: Output Current: Input Fuse: Output Fuses: DB Fuses: Basic Outputs: Module Outputs:
1A @ 115VAC, 50-60 Hz 12VDC - nominal 13.8V 24VDC - nominal 27.6V 3A @ 12VDC / 2A @ 24VDC 1A 3AG Slo Blo Battery/DC Output - 5A 3AG Slo Blo Self-resetting when powered down for 2 minutes Capacity 10AWG Capacity 14 AWG
NYC MEA #23-92-E
Accessories • 6000 Series Exit Controls Push-buttons in a variety of switching configurations and exit sensor bars. • 7000 Series Access Controls Keyswitches accept most mortise cylinders for controlled access. Rugged digital entry keypads. • 8000 Series Consoles Desktop, slope front and rack mount fabricated to customer specifications.
LOCKING DEVICE
OUTPUT VOLTAGE
MAX LOAD
1300
2511
2011/3000
2268-10
3006
3101B
12VDC
3A
3
5
6
4
5
3
24VDC
2A
4
7
8
5
6
3
Recommended Wire Gauge Load Current At 12V 100 150 200 250 300 400 500 750 1000
0.25a
18 18 16 16 16 14 14 12 -
0.5a
18 16 14 14 12 12 -
0.75a
16 14 12 12 12 -
1a
14 12 12 -
Load Current At 24V 1.25a
14 12 -
1.5a
12 12 -
2a
12 -
DYNALOCK CORPORATION 705 EMMETT STREET / PO BOX 2728 BRISTOL, CT 06011-2728 PHONE: 877-DYNALOCK / FAX: 860-585-0338 E-MAIL: [email protected] WEBSITE: WWW.DYNALOCK.COM 10/07
Wire run (ft)
100 150 200 250 300 400 500 750 1000
0.25a
18 18 18 18 18 18 16 14 14
0.5a
18 18 18 16 16 14 14 12 -
Description
Standard Features
DynaLock 5500 Series Power Supply offers the reliability of solid state electronics, versatility of field selectable voltage output, and flexibility of modular design. Use direct power output or choose one of the available expansion boards.
• Filtered and Regulated Voltage Output • Field Selectable 12 or 24 VDC. • Built-in Charging Circuit • Hinged Cover Enclosure: Off-white finish with conduit knockouts and optional key lock cover. Dimensions 4”x12”x15”. • Lifetime Warranty: Made in the USA by DynaLock, with over 20 years experience in the manufacture of electromagnetic locks.
Specify a distribution board (DB5 / DB10) for 5 or 10 individual fused outputs. Add individual control modules for switched outputs, with or without time delay. Specify the interlock logic board (ILB) option for a 4 DPDT relay board. Optional fire alarm control (FAC) relay provides integration with fire or emergency alarm system. A battery charging circuit is standard. Specify 4 or 7 amp hours, and 12 or 24 volts for battery backup.
Lock Capacity
Wire run (ft)
3A @ 12VDC / 2A @ 24VDC Up To 10 Fused Outputs Fire Alarm Tie-In Battery Back-Up Lifetime Warranty
0.75a
18 16 16 14 14 12 12 -
1a
18 16 14 14 12 12 -
1.25a
16 14 14 12 12 -
Featuring
DynaLife
®
Lifetime Warranty
1.5a
16 14 12 12 12 -
2a
14 12 12 12 -
The DynaLock 5500 Power Supply provides clean, filtered, and regulated DC voltage. Specify for all electronic devices, including access controls, electromagnetic locks, and CCTV.
Optional Features • Anti-Tamper Switch (ATS) indicates unauthorized opening of the enclosure cover. • Key Lock (KLC) for enclosure cover. • Fire Alarm Control (FAC) tie point. • Power Cord (PC) for use with typical wall plug in lieu of hard-wired 120 VAC. • Individual Fused Outputs: 5 (DB5) or 10 (DB10) output distribution board. • Controlled Outputs: Individual Control Modules (CM/ CMTD) offer the flexibility of selectable inputs (NO/NC), fail-safe or fail-secure outputs, and adjustable time delay.
LIFE SAFETY PRODUCTS
F U L LY I N T E G R AT E D S E C U R I T Y S Y S T E M S Electromagnetic Locks Controls Power Supplies
