5600 Series - Dynalock
DynaLock For Life
TM
SM
5600 Series Power Supply
5600 Series
Heavy Duty Power Supply
Specifications MECHANICAL Enclosure: Weight: Color:
4” x 12” x 15” Steel 11 lbs. (average) add approx. 6 lbs. per battery Off-white
• • • • •
ELECTRICAL Input Power: Output Voltage: Output Current: Input Fuse: Output Fuses: DB Fuses: Basic Outputs: Module Outputs:
2A @ 115VAC, 50-60 Hz 12VDC - nominal 13.8V 24VDC - nominal 27.6V 10A @ 12VDC / 5A @ 24VDC 3A 3AG Slo Blo Battery/DC Output - 12A/6A 3AG Slo Blo Self-resetting when powered down for 2 minutes Capacity 10AWG Capacity 14 AWG
NYC MEA #23-92-E
Accessories • 6000 Series Exit Controls Push-buttons in a variety of switching configurations and exit sensor bars. • 7000 Series Access Controls Keyswitches accept most mortise cylinders for controlled access. Rugged digital entry keypads. • 8000 Series Consoles Desktop, slope front and rack mount fabricated to customer specifications.
LOCKING DEVICE
OUTPUT VOLTAGE
MAX LOAD
1300
2511
2011/3000
2268-10
3006
3101B
12VDC
10A
10
19
23
14
19
13
24VDC
5A
10
19
23
13
16
9
Recommended Wire Gauge Load Current At 12V 100 150 200 250 300 400 500 750 1000
0.25a
18 18 16 16 16 14 14 12 -
0.5a
18 16 14 14 12 12 -
0.75a
16 14 12 12 12 -
1a
14 12 12 -
Load Current At 24V 1.25a
14 12 -
1.5a
12 12 -
2a
12 -
DYNALOCK CORPORATION 705 EMMETT STREET / PO BOX 2728 BRISTOL, CT 06011-2728 PHONE: 877-DYNALOCK / FAX: 860-585-0338 E-MAIL: [email protected] WEBSITE: WWW.DYNALOCK.COM
Wire run (ft)
100 150 200 250 300 400 500 750 1000
0.25a
18 18 18 18 18 18 16 14 14
0.5a
18 18 18 16 16 14 14 12 -
0.75a
18 16 16 14 14 12 12 -
1a
18 16 14 14 12 12 -
Description
Standard Features
DynaLock 5600 Series Power Supply offers the reliability of solid state electronics and flexibility of modular design. Power more devices with this high-output supply. Use direct power output or choose one of the available expansion boards.
• Filtered and Regulated Voltage Output • Built-in Charging Circuit • Available 220VAC Input • Hinged Cover Enclosure: Off-white finish with conduit knockouts and optional key lock cover. Dimensions 4”x12”x15”. • Lifetime Warranty: Made in the USA by DynaLock, with over 20 years experience in the manufacture of electronic security & access control products.
Specify a distribution board (DB5 / DB10) for 5 or 10 individually fused outputs. Add individual control modules for switched outputs, with or without time delay. Specify the interlock logic board (ILB) option for a 4 DPDT relay board. Optional fire alarm control (FAC) relay provides integration with fire or emergency alarm system. A battery charging circuit is standard. Specify 4 or 7 amp hours, and 12 or 24 volts for battery backup.
Lock Capacity
Wire run (ft)
10A @ 12VDC / 5A @ 24VDC Up To 10 Fused Outputs Fire Alarm Tie-In Battery Back-Up Lifetime Warranty
1.25a
16 14 14 12 12 -
1.5a
16 14 12 12 12 -
2a
The DynaLock 5600 Power Supply provides clean, filtered, and regulated DC voltage. Specify for all electronic devices, including access controls, electromagnetic locks, and CCTV.
14 12 12 12 -
Optional Features • Anti-Tamper Switch (ATS) indicates unauthorized opening of the enclosure cover. • Key Lock (KLC) for enclosure cover. • Fire Alarm Control (FAC) tie point. • Power Cord (PC) for use with typical wall plug in lieu of hard-wired 120 VAC. • Individual Fused Outputs: 5 (DB5) or 10 (DB10) output distribution board. • Controlled Outputs: Individual Control Modules (CM/ CMTD) offer the flexibility of selectable inputs (NO/NC), fail-safe or fail-secure outputs, and adjustable time delay.
LIFE SAFETY PRODUCTS
Featuring
DynaLife
F U L LY I N T E G R AT E D S E C U R I T Y S Y S T E M S Electromagnetic Locks Controls Power Supplies
®
Lifetime Warranty
3/08
DynaLock For Life
TM
SM
Options ATS BBU1-4 BBU1-7 BBU2-4 BBU2-7 CAB CM CMTD DB5 DB10 FAC FACMR ILB KLC PC
CONTROL JUMPER
ANTI-TAMPER SWITCH - Signals opening of enclosure cover (SPST, NO contacts) BATTERY BACK-UP - 4 AH @ 12VDC, 1 battery BATTERY BACK-UP - 7 AH @ 12VDC, 1 battery BATTERY BACK-UP - 4 AH @ 24VDC, 2 batteries BATTERY BACK-UP - 7 AH @ 24VDC, 2 batteries CABLE KIT - For third party batteries (included at no charge with all BBU options) CONTROL MODULE - Plug in allowing control over individual outputs (requires DB5 or DB10) CONTROL MODULE with TIME DELAY - Plug in, 0-80 second relock delay (requires DB5 or DB10) DISTRIBUTION BOARD - 5 zone fused, accepts any combination of up to 5 CMs or CMTDs DISTRIBUTION BOARD - 10 zone fused, accepts any combination of up to 10 CMs or CMTDs FIRE ALARM CONTROL - Plug in for connection to fire alarm system (One per supply) FIRE ALARM CONTROL, MANUAL RESET - Latches upon fire alarm (Requires FAC option) INTERLOCK LOGIC BOARD - Four DPDT relays KEY LOCKED COVER - Includes 2 keys POWER CORD - Six foot, pre-connected, 3-wire plug-in line cord
CM1
CUT JUMPER FOR 24V OPERATION ON RELAY #2
CUT JUMPER FOR 24V OPERATION ON RELAY # 3
D. C. INPUTS
ALL RELAYS ARE SHOWN IN THE NON ENERGIZED STATE. 1
2
3
4
5
6
1
2
3
4
5
6
5600 COMPONENTS C NC NO C NC NO
C NC NO C NC NO
RELAY 1
RELAY 2
1
2
3
CUT JUMPER FOR 24V OPERATION ON RELAY # 4
BOARD P.N. 500258 REV. B
4
5 6 1 2 ( - ) +1 +2 +3 +4
3
4
5
6
FOR 24V OPERATION ON RELAY # 1
RELAY 3
CUT JUMPER FOR 24V OPERATION ON RELAY # 3
FOR 24V OPERATION ON RELAY #2
RELAY 4
ALL RELAYS ARE SHOWN IN THE NON ENERGIZED STATE. 1
2
3
4
5
6
1
2
3
4
5
CUT JUMPER FOR 24V OPERATION ON RELAY # 4
BOARD P.N. 500258 REV. B
6
1
2
3
4
5
6
1
2
3
4
5
C NC NO C NC NO
C NC NO C NC NO
C NC NO C NC NO
RELAY 1
RELAY 2
RELAY 3
RELAY 4
CM4
CM5
CM6
CM7
CM8
CM9
CM10
FAC Module Fire Alarm Control. Plugs into the primary circuit board. When a signal is received from an emergency panel it instantly unlocks all locking devices driven by the 5600 Power Supply. The module will automatically reset when the emergency signal is restored or may be wired to require a manual reset (FACMR).
POWER TRANSFORMER SECTION
6
C NC NO C NC NO
CM3
SELF-RESTORING FUSE
INTERLOCK LOGIC BOARD DynaLock Corp. P.N. 500259
C NC NO C NCCUT NOJUMPERC NC NO C NCCUT NOJUMPER
CM2
Two distribution boards, 5 and 10 outputs respectively, are available to provide fused individual tie points, to facilitate lock wiring. The output fuses are self-restoring by correcting the overload and disconnecting the line voltage for 2 minutes. A control jumper at each station selects unswitched voltage or the use of a Control Module.
INDIVIDUAL FUSED DC OUTPUTS
( - ) +1 +2 +3 +4
CUT JUMPER FOR 24V OPERATION ON RELAY # 1
DB5 / DB10 Distribution Board
DYNALOCK CORP. PN500174 PSDSBORD
INTERLOCK LOGIC BOARD DynaLock Corp. P.N. 500259
D. C. INPUTS
DB10
INPUT FROM POWER SUPPLY
TIME DELAY ADJUSTMENT 1
2
DC OUTPUT FUSE 1
2
3
4
1
2
3
4
5
1
2
3
4
CM & CMTD Modules
5
5
Control Module and Control Module with Time Delay. Plug-in isolation relay board to switch lock power. Includes auxiliary relay contacts to signal other devices such as CCTV or interlocks. The CMTD module offers the same features with the addition of an adjustable 0-80 second delay on relock.
POWER ON LED LINE INPUT FUSE
CONTROL MODULE POWER OUTPUT TO SUPPLY
DYNALOCK CORP. PN500176 PSCMBORD 1 GND
DYNALOCK CORP. PN500176 PSCMBORD
DYNALOCK CORP. PN500176 PSCMBORD
DYNALOCK CORP. PN500174 PSDSBORD
POWER OUTPUT 1 1
1
1
2
2
2
2
2 NEUT
2 LINE FUSE
3
3
3
3
4
4
4
4
5
5
5
5
3 LINE LINE INPUT 110 VAC 60 HZ
DB5/DB10 DISTRIBUTION BOARD
3
DYNALOCK CORP. PN500172 REV B PSIOBORD 4 - 97
4
FAC RELAY SOCKET
CUT JUMPER WHEN RELAY IS INSTALLED
1 2 3 REMOTE CONTROL INPUT
FAC TERMINALS
INPUT FROM POWER SUPPLY
1
AC LINE INPUT
POWER INPUT FROM SUPPLY
BATTERY INPUT
CM1
BATTERY FUSE
CM2
CM3
CM4
CM5
CM6
CM7
CM8
CM9
ILB Board
( - ) +1 +2 +3 +4
Interlock Logic Board. Four DPDT relays for control of interlocks. Each relay has an individual trigger which can be set for 12 or 24VDC input.
CM10
INDIVIDUAL FUSED DC OUTPUTS BASIC DC OUTPUT
BATTERY CONNECTION
1
2
3
4
5
PRIMARY CIRCUIT BOARD
2
1
2
3
4
5
INTERLOCK LOGIC BOARD DynaLock Corp. P.N. 500259
D. C. INPUTS
3
CUT JUMPER FOR 24V OPERATION ON RELAY # 1
CUT JUMPER FOR 24V OPERATION ON RELAY #2
CUT JUMPER FOR 24V OPERATION ON RELAY # 3
ALL RELAYS ARE SHOWN IN THE NON ENERGIZED STATE. 1
2
3
4
5
6
1
2
3
4
5
CUT JUMPER FOR 24V OPERATION ON RELAY # 4
BOARD P.N. 500258 REV. B
6
1
2
3
4
5
6
1
2
3
4
5
6
C NC NO C NC NO
C NC NO C NC NO
C NC NO C NC NO
C NC NO C NC NO
RELAY 1
RELAY 2
RELAY 3
RELAY 4
3
DynaLock For Life
TM
SM
Options ATS BBU1-4 BBU1-7 BBU2-4 BBU2-7 CAB CM CMTD DB5 DB10 FAC FACMR ILB KLC PC
CONTROL JUMPER
ANTI-TAMPER SWITCH - Signals opening of enclosure cover (SPST, NO contacts) BATTERY BACK-UP - 4 AH @ 12VDC, 1 battery BATTERY BACK-UP - 7 AH @ 12VDC, 1 battery BATTERY BACK-UP - 4 AH @ 24VDC, 2 batteries BATTERY BACK-UP - 7 AH @ 24VDC, 2 batteries CABLE KIT - For third party batteries (included at no charge with all BBU options) CONTROL MODULE - Plug in allowing control over individual outputs (requires DB5 or DB10) CONTROL MODULE with TIME DELAY - Plug in, 0-80 second relock delay (requires DB5 or DB10) DISTRIBUTION BOARD - 5 zone fused, accepts any combination of up to 5 CMs or CMTDs DISTRIBUTION BOARD - 10 zone fused, accepts any combination of up to 10 CMs or CMTDs FIRE ALARM CONTROL - Plug in for connection to fire alarm system (One per supply) FIRE ALARM CONTROL, MANUAL RESET - Latches upon fire alarm (Requires FAC option) INTERLOCK LOGIC BOARD - Four DPDT relays KEY LOCKED COVER - Includes 2 keys POWER CORD - Six foot, pre-connected, 3-wire plug-in line cord
CM1
CUT JUMPER FOR 24V OPERATION ON RELAY #2
CUT JUMPER FOR 24V OPERATION ON RELAY # 3
ALL RELAYS ARE SHOWN IN THE NON ENERGIZED STATE. 1
2
3
4
5
6
1
2
3
4
5
6
C NC NO C NC NO
C NC NO C NC NO
RELAY 1
RELAY 2
5600 COMPONENTS
1
D. C. INPUTS 2
3
CUT JUMPER FOR 24V OPERATION ON RELAY # 4
BOARD P.N. 500258 REV. B
4
5 6 1 2 ( - ) +1 +2 +3 +4
3
4
5
6
FOR 24V OPERATION ON RELAY # 1
RELAY 3
CUT JUMPER FOR 24V OPERATION ON RELAY # 3
FOR 24V OPERATION ON RELAY #2
RELAY 4
ALL RELAYS ARE SHOWN IN THE NON ENERGIZED STATE. 1
2
3
4
5
6
1
2
3
4
5
CUT JUMPER FOR 24V OPERATION ON RELAY # 4
BOARD P.N. 500258 REV. B
6
1
2
3
4
5
6
1
2
3
4
5
C NC NO C NC NO
C NC NO C NC NO
C NC NO C NC NO
RELAY 1
RELAY 2
RELAY 3
RELAY 4
CM4
CM5
CM6
CM7
CM8
CM9
CM10
FAC Module Fire Alarm Control. Plugs into the primary circuit board. When a signal is received from an emergency panel it instantly unlocks all locking devices driven by the 5600 Power Supply. The module will automatically reset when the emergency signal is restored or may be wired to require a manual reset (FACMR).
POWER TRANSFORMER SECTION
6
C NC NO C NC NO
CM3
SELF-RESTORING FUSE
INTERLOCK LOGIC BOARD DynaLock Corp. P.N. 500259
C NC NO C NCCUT NOJUMPERC NC NO C NCCUT NOJUMPER
CM2
Two distribution boards, 5 and 10 outputs respectively, are available to provide fused individual tie points, to facilitate lock wiring. The output fuses are self-restoring by correcting the overload and disconnecting the line voltage for 2 minutes. A control jumper at each station selects unswitched voltage or the use of a Control Module.
INDIVIDUAL FUSED DC OUTPUTS
( - ) +1 +2 +3 +4
CUT JUMPER FOR 24V OPERATION ON RELAY # 1
DB5 / DB10 Distribution Board
DYNALOCK CORP. PN500174 PSDSBORD
INTERLOCK LOGIC BOARD DynaLock Corp. P.N. 500259
D. C. INPUTS
DB10
INPUT FROM POWER SUPPLY
TIME DELAY ADJUSTMENT 1
2
DC OUTPUT FUSE 1
2
3
4
1
2
3
4
5
1
2
3
4
CM & CMTD Modules
5
5
Control Module and Control Module with Time Delay. Plug-in isolation relay board to switch lock power. Includes auxiliary relay contacts to signal other devices such as CCTV or interlocks. The CMTD module offers the same features with the addition of an adjustable 0-80 second delay on relock.
POWER ON LED LINE INPUT FUSE
CONTROL MODULE POWER OUTPUT TO SUPPLY
DYNALOCK CORP. PN500176 PSCMBORD 1 GND
DYNALOCK CORP. PN500176 PSCMBORD
DYNALOCK CORP. PN500176 PSCMBORD
DYNALOCK CORP. PN500174 PSDSBORD
POWER OUTPUT 1 1
1
1
2
2
2
2
2 NEUT
2 LINE FUSE
3
3
3
3
4
4
4
4
5
5
5
5
3 LINE LINE INPUT 110 VAC 60 HZ
DB5/DB10 DISTRIBUTION BOARD
3
DYNALOCK CORP. PN500172 REV B PSIOBORD 4 - 97
4
FAC RELAY SOCKET
CUT JUMPER WHEN RELAY IS INSTALLED
1 2 3 REMOTE CONTROL INPUT
FAC TERMINALS
INPUT FROM POWER SUPPLY
1
AC LINE INPUT
POWER INPUT FROM SUPPLY
BATTERY INPUT
CM1
BATTERY FUSE
CM2
CM3
CM4
CM5
CM6
CM7
CM8
CM9
ILB Board
( - ) +1 +2 +3 +4
Interlock Logic Board. Four DPDT relays for control of interlocks. Each relay has an individual trigger which can be set for 12 or 24VDC input.
CM10
INDIVIDUAL FUSED DC OUTPUTS BASIC DC OUTPUT
BATTERY CONNECTION
1
2
3
4
5
PRIMARY CIRCUIT BOARD
2
1
2
3
4
5
INTERLOCK LOGIC BOARD DynaLock Corp. P.N. 500259
D. C. INPUTS
3
CUT JUMPER FOR 24V OPERATION ON RELAY # 1
CUT JUMPER FOR 24V OPERATION ON RELAY #2
CUT JUMPER FOR 24V OPERATION ON RELAY # 3
ALL RELAYS ARE SHOWN IN THE NON ENERGIZED STATE. 1
2
3
4
5
6
1
2
3
4
5
CUT JUMPER FOR 24V OPERATION ON RELAY # 4
BOARD P.N. 500258 REV. B
6
1
2
3
4
5
6
1
2
3
4
5
6
C NC NO C NC NO
C NC NO C NC NO
C NC NO C NC NO
C NC NO C NC NO
RELAY 1
RELAY 2
RELAY 3
RELAY 4
3
DynaLock For Life
TM
SM
5600 Series Power Supply
5600 Series
Heavy Duty Power Supply
Specifications MECHANICAL Enclosure: Weight: Color:
4” x 12” x 15” Steel 11 lbs. (average) add approx. 6 lbs. per battery Off-white
• • • • •
ELECTRICAL Input Power: Output Voltage: Output Current: Input Fuse: Output Fuses: DB Fuses: Basic Outputs: Module Outputs:
2A @ 115VAC, 50-60 Hz 12VDC - nominal 13.8V 24VDC - nominal 27.6V 10A @ 12VDC / 5A @ 24VDC 3A 3AG Slo Blo Battery/DC Output - 12A/6A 3AG Slo Blo Self-resetting when powered down for 2 minutes Capacity 10AWG Capacity 14 AWG
NYC MEA #23-92-E
Accessories • 6000 Series Exit Controls Push-buttons in a variety of switching configurations and exit sensor bars. • 7000 Series Access Controls Keyswitches accept most mortise cylinders for controlled access. Rugged digital entry keypads. • 8000 Series Consoles Desktop, slope front and rack mount fabricated to customer specifications.
LOCKING DEVICE
OUTPUT VOLTAGE
MAX LOAD
1300
2511
2011/3000
2268-10
3006
3101B
12VDC
10A
10
19
23
14
19
13
24VDC
5A
10
19
23
13
16
9
Recommended Wire Gauge Load Current At 12V 100 150 200 250 300 400 500 750 1000
0.25a
18 18 16 16 16 14 14 12 -
0.5a
18 16 14 14 12 12 -
0.75a
16 14 12 12 12 -
1a
14 12 12 -
Load Current At 24V 1.25a
14 12 -
1.5a
12 12 -
2a
12 -
DYNALOCK CORPORATION 705 EMMETT STREET / PO BOX 2728 BRISTOL, CT 06011-2728 PHONE: 877-DYNALOCK / FAX: 860-585-0338 E-MAIL: [email protected] WEBSITE: WWW.DYNALOCK.COM
Wire run (ft)
100 150 200 250 300 400 500 750 1000
0.25a
18 18 18 18 18 18 16 14 14
0.5a
18 18 18 16 16 14 14 12 -
0.75a
18 16 16 14 14 12 12 -
1a
18 16 14 14 12 12 -
Description
Standard Features
DynaLock 5600 Series Power Supply offers the reliability of solid state electronics and flexibility of modular design. Power more devices with this high-output supply. Use direct power output or choose one of the available expansion boards.
• Filtered and Regulated Voltage Output • Built-in Charging Circuit • Available 220VAC Input • Hinged Cover Enclosure: Off-white finish with conduit knockouts and optional key lock cover. Dimensions 4”x12”x15”. • Lifetime Warranty: Made in the USA by DynaLock, with over 20 years experience in the manufacture of electronic security & access control products.
Specify a distribution board (DB5 / DB10) for 5 or 10 individually fused outputs. Add individual control modules for switched outputs, with or without time delay. Specify the interlock logic board (ILB) option for a 4 DPDT relay board. Optional fire alarm control (FAC) relay provides integration with fire or emergency alarm system. A battery charging circuit is standard. Specify 4 or 7 amp hours, and 12 or 24 volts for battery backup.
Lock Capacity
Wire run (ft)
10A @ 12VDC / 5A @ 24VDC Up To 10 Fused Outputs Fire Alarm Tie-In Battery Back-Up Lifetime Warranty
1.25a
16 14 14 12 12 -
1.5a
16 14 12 12 12 -
2a
The DynaLock 5600 Power Supply provides clean, filtered, and regulated DC voltage. Specify for all electronic devices, including access controls, electromagnetic locks, and CCTV.
14 12 12 12 -
Optional Features • Anti-Tamper Switch (ATS) indicates unauthorized opening of the enclosure cover. • Key Lock (KLC) for enclosure cover. • Fire Alarm Control (FAC) tie point. • Power Cord (PC) for use with typical wall plug in lieu of hard-wired 120 VAC. • Individual Fused Outputs: 5 (DB5) or 10 (DB10) output distribution board. • Controlled Outputs: Individual Control Modules (CM/ CMTD) offer the flexibility of selectable inputs (NO/NC), fail-safe or fail-secure outputs, and adjustable time delay.
LIFE SAFETY PRODUCTS
Featuring
DynaLife
F U L LY I N T E G R AT E D S E C U R I T Y S Y S T E M S Electromagnetic Locks Controls Power Supplies
®
Lifetime Warranty
3/08
TM
SM
5600 Series Power Supply
5600 Series
Heavy Duty Power Supply
Specifications MECHANICAL Enclosure: Weight: Color:
4” x 12” x 15” Steel 11 lbs. (average) add approx. 6 lbs. per battery Off-white
• • • • •
ELECTRICAL Input Power: Output Voltage: Output Current: Input Fuse: Output Fuses: DB Fuses: Basic Outputs: Module Outputs:
2A @ 115VAC, 50-60 Hz 12VDC - nominal 13.8V 24VDC - nominal 27.6V 10A @ 12VDC / 5A @ 24VDC 3A 3AG Slo Blo Battery/DC Output - 12A/6A 3AG Slo Blo Self-resetting when powered down for 2 minutes Capacity 10AWG Capacity 14 AWG
NYC MEA #23-92-E
Accessories • 6000 Series Exit Controls Push-buttons in a variety of switching configurations and exit sensor bars. • 7000 Series Access Controls Keyswitches accept most mortise cylinders for controlled access. Rugged digital entry keypads. • 8000 Series Consoles Desktop, slope front and rack mount fabricated to customer specifications.
LOCKING DEVICE
OUTPUT VOLTAGE
MAX LOAD
1300
2511
2011/3000
2268-10
3006
3101B
12VDC
10A
10
19
23
14
19
13
24VDC
5A
10
19
23
13
16
9
Recommended Wire Gauge Load Current At 12V 100 150 200 250 300 400 500 750 1000
0.25a
18 18 16 16 16 14 14 12 -
0.5a
18 16 14 14 12 12 -
0.75a
16 14 12 12 12 -
1a
14 12 12 -
Load Current At 24V 1.25a
14 12 -
1.5a
12 12 -
2a
12 -
DYNALOCK CORPORATION 705 EMMETT STREET / PO BOX 2728 BRISTOL, CT 06011-2728 PHONE: 877-DYNALOCK / FAX: 860-585-0338 E-MAIL: [email protected] WEBSITE: WWW.DYNALOCK.COM
Wire run (ft)
100 150 200 250 300 400 500 750 1000
0.25a
18 18 18 18 18 18 16 14 14
0.5a
18 18 18 16 16 14 14 12 -
0.75a
18 16 16 14 14 12 12 -
1a
18 16 14 14 12 12 -
Description
Standard Features
DynaLock 5600 Series Power Supply offers the reliability of solid state electronics and flexibility of modular design. Power more devices with this high-output supply. Use direct power output or choose one of the available expansion boards.
• Filtered and Regulated Voltage Output • Built-in Charging Circuit • Available 220VAC Input • Hinged Cover Enclosure: Off-white finish with conduit knockouts and optional key lock cover. Dimensions 4”x12”x15”. • Lifetime Warranty: Made in the USA by DynaLock, with over 20 years experience in the manufacture of electronic security & access control products.
Specify a distribution board (DB5 / DB10) for 5 or 10 individually fused outputs. Add individual control modules for switched outputs, with or without time delay. Specify the interlock logic board (ILB) option for a 4 DPDT relay board. Optional fire alarm control (FAC) relay provides integration with fire or emergency alarm system. A battery charging circuit is standard. Specify 4 or 7 amp hours, and 12 or 24 volts for battery backup.
Lock Capacity
Wire run (ft)
10A @ 12VDC / 5A @ 24VDC Up To 10 Fused Outputs Fire Alarm Tie-In Battery Back-Up Lifetime Warranty
1.25a
16 14 14 12 12 -
1.5a
16 14 12 12 12 -
2a
The DynaLock 5600 Power Supply provides clean, filtered, and regulated DC voltage. Specify for all electronic devices, including access controls, electromagnetic locks, and CCTV.
14 12 12 12 -
Optional Features • Anti-Tamper Switch (ATS) indicates unauthorized opening of the enclosure cover. • Key Lock (KLC) for enclosure cover. • Fire Alarm Control (FAC) tie point. • Power Cord (PC) for use with typical wall plug in lieu of hard-wired 120 VAC. • Individual Fused Outputs: 5 (DB5) or 10 (DB10) output distribution board. • Controlled Outputs: Individual Control Modules (CM/ CMTD) offer the flexibility of selectable inputs (NO/NC), fail-safe or fail-secure outputs, and adjustable time delay.
LIFE SAFETY PRODUCTS
Featuring
DynaLife
F U L LY I N T E G R AT E D S E C U R I T Y S Y S T E M S Electromagnetic Locks Controls Power Supplies
®
Lifetime Warranty
3/08
DynaLock For Life
TM
SM
Options ATS BBU1-4 BBU1-7 BBU2-4 BBU2-7 CAB CM CMTD DB5 DB10 FAC FACMR ILB KLC PC
CONTROL JUMPER
ANTI-TAMPER SWITCH - Signals opening of enclosure cover (SPST, NO contacts) BATTERY BACK-UP - 4 AH @ 12VDC, 1 battery BATTERY BACK-UP - 7 AH @ 12VDC, 1 battery BATTERY BACK-UP - 4 AH @ 24VDC, 2 batteries BATTERY BACK-UP - 7 AH @ 24VDC, 2 batteries CABLE KIT - For third party batteries (included at no charge with all BBU options) CONTROL MODULE - Plug in allowing control over individual outputs (requires DB5 or DB10) CONTROL MODULE with TIME DELAY - Plug in, 0-80 second relock delay (requires DB5 or DB10) DISTRIBUTION BOARD - 5 zone fused, accepts any combination of up to 5 CMs or CMTDs DISTRIBUTION BOARD - 10 zone fused, accepts any combination of up to 10 CMs or CMTDs FIRE ALARM CONTROL - Plug in for connection to fire alarm system (One per supply) FIRE ALARM CONTROL, MANUAL RESET - Latches upon fire alarm (Requires FAC option) INTERLOCK LOGIC BOARD - Four DPDT relays KEY LOCKED COVER - Includes 2 keys POWER CORD - Six foot, pre-connected, 3-wire plug-in line cord
CM1
CUT JUMPER FOR 24V OPERATION ON RELAY #2
CUT JUMPER FOR 24V OPERATION ON RELAY # 3
D. C. INPUTS
ALL RELAYS ARE SHOWN IN THE NON ENERGIZED STATE. 1
2
3
4
5
6
1
2
3
4
5
6
5600 COMPONENTS C NC NO C NC NO
C NC NO C NC NO
RELAY 1
RELAY 2
1
2
3
CUT JUMPER FOR 24V OPERATION ON RELAY # 4
BOARD P.N. 500258 REV. B
4
5 6 1 2 ( - ) +1 +2 +3 +4
3
4
5
6
FOR 24V OPERATION ON RELAY # 1
RELAY 3
CUT JUMPER FOR 24V OPERATION ON RELAY # 3
FOR 24V OPERATION ON RELAY #2
RELAY 4
ALL RELAYS ARE SHOWN IN THE NON ENERGIZED STATE. 1
2
3
4
5
6
1
2
3
4
5
CUT JUMPER FOR 24V OPERATION ON RELAY # 4
BOARD P.N. 500258 REV. B
6
1
2
3
4
5
6
1
2
3
4
5
C NC NO C NC NO
C NC NO C NC NO
C NC NO C NC NO
RELAY 1
RELAY 2
RELAY 3
RELAY 4
CM4
CM5
CM6
CM7
CM8
CM9
CM10
FAC Module Fire Alarm Control. Plugs into the primary circuit board. When a signal is received from an emergency panel it instantly unlocks all locking devices driven by the 5600 Power Supply. The module will automatically reset when the emergency signal is restored or may be wired to require a manual reset (FACMR).
POWER TRANSFORMER SECTION
6
C NC NO C NC NO
CM3
SELF-RESTORING FUSE
INTERLOCK LOGIC BOARD DynaLock Corp. P.N. 500259
C NC NO C NCCUT NOJUMPERC NC NO C NCCUT NOJUMPER
CM2
Two distribution boards, 5 and 10 outputs respectively, are available to provide fused individual tie points, to facilitate lock wiring. The output fuses are self-restoring by correcting the overload and disconnecting the line voltage for 2 minutes. A control jumper at each station selects unswitched voltage or the use of a Control Module.
INDIVIDUAL FUSED DC OUTPUTS
( - ) +1 +2 +3 +4
CUT JUMPER FOR 24V OPERATION ON RELAY # 1
DB5 / DB10 Distribution Board
DYNALOCK CORP. PN500174 PSDSBORD
INTERLOCK LOGIC BOARD DynaLock Corp. P.N. 500259
D. C. INPUTS
DB10
INPUT FROM POWER SUPPLY
TIME DELAY ADJUSTMENT 1
2
DC OUTPUT FUSE 1
2
3
4
1
2
3
4
5
1
2
3
4
CM & CMTD Modules
5
5
Control Module and Control Module with Time Delay. Plug-in isolation relay board to switch lock power. Includes auxiliary relay contacts to signal other devices such as CCTV or interlocks. The CMTD module offers the same features with the addition of an adjustable 0-80 second delay on relock.
POWER ON LED LINE INPUT FUSE
CONTROL MODULE POWER OUTPUT TO SUPPLY
DYNALOCK CORP. PN500176 PSCMBORD 1 GND
DYNALOCK CORP. PN500176 PSCMBORD
DYNALOCK CORP. PN500176 PSCMBORD
DYNALOCK CORP. PN500174 PSDSBORD
POWER OUTPUT 1 1
1
1
2
2
2
2
2 NEUT
2 LINE FUSE
3
3
3
3
4
4
4
4
5
5
5
5
3 LINE LINE INPUT 110 VAC 60 HZ
DB5/DB10 DISTRIBUTION BOARD
3
DYNALOCK CORP. PN500172 REV B PSIOBORD 4 - 97
4
FAC RELAY SOCKET
CUT JUMPER WHEN RELAY IS INSTALLED
1 2 3 REMOTE CONTROL INPUT
FAC TERMINALS
INPUT FROM POWER SUPPLY
1
AC LINE INPUT
POWER INPUT FROM SUPPLY
BATTERY INPUT
CM1
BATTERY FUSE
CM2
CM3
CM4
CM5
CM6
CM7
CM8
CM9
ILB Board
( - ) +1 +2 +3 +4
Interlock Logic Board. Four DPDT relays for control of interlocks. Each relay has an individual trigger which can be set for 12 or 24VDC input.
CM10
INDIVIDUAL FUSED DC OUTPUTS BASIC DC OUTPUT
BATTERY CONNECTION
1
2
3
4
5
PRIMARY CIRCUIT BOARD
2
1
2
3
4
5
INTERLOCK LOGIC BOARD DynaLock Corp. P.N. 500259
D. C. INPUTS
3
CUT JUMPER FOR 24V OPERATION ON RELAY # 1
CUT JUMPER FOR 24V OPERATION ON RELAY #2
CUT JUMPER FOR 24V OPERATION ON RELAY # 3
ALL RELAYS ARE SHOWN IN THE NON ENERGIZED STATE. 1
2
3
4
5
6
1
2
3
4
5
CUT JUMPER FOR 24V OPERATION ON RELAY # 4
BOARD P.N. 500258 REV. B
6
1
2
3
4
5
6
1
2
3
4
5
6
C NC NO C NC NO
C NC NO C NC NO
C NC NO C NC NO
C NC NO C NC NO
RELAY 1
RELAY 2
RELAY 3
RELAY 4
3
DynaLock For Life
TM
SM
Options ATS BBU1-4 BBU1-7 BBU2-4 BBU2-7 CAB CM CMTD DB5 DB10 FAC FACMR ILB KLC PC
CONTROL JUMPER
ANTI-TAMPER SWITCH - Signals opening of enclosure cover (SPST, NO contacts) BATTERY BACK-UP - 4 AH @ 12VDC, 1 battery BATTERY BACK-UP - 7 AH @ 12VDC, 1 battery BATTERY BACK-UP - 4 AH @ 24VDC, 2 batteries BATTERY BACK-UP - 7 AH @ 24VDC, 2 batteries CABLE KIT - For third party batteries (included at no charge with all BBU options) CONTROL MODULE - Plug in allowing control over individual outputs (requires DB5 or DB10) CONTROL MODULE with TIME DELAY - Plug in, 0-80 second relock delay (requires DB5 or DB10) DISTRIBUTION BOARD - 5 zone fused, accepts any combination of up to 5 CMs or CMTDs DISTRIBUTION BOARD - 10 zone fused, accepts any combination of up to 10 CMs or CMTDs FIRE ALARM CONTROL - Plug in for connection to fire alarm system (One per supply) FIRE ALARM CONTROL, MANUAL RESET - Latches upon fire alarm (Requires FAC option) INTERLOCK LOGIC BOARD - Four DPDT relays KEY LOCKED COVER - Includes 2 keys POWER CORD - Six foot, pre-connected, 3-wire plug-in line cord
CM1
CUT JUMPER FOR 24V OPERATION ON RELAY #2
CUT JUMPER FOR 24V OPERATION ON RELAY # 3
ALL RELAYS ARE SHOWN IN THE NON ENERGIZED STATE. 1
2
3
4
5
6
1
2
3
4
5
6
C NC NO C NC NO
C NC NO C NC NO
RELAY 1
RELAY 2
5600 COMPONENTS
1
D. C. INPUTS 2
3
CUT JUMPER FOR 24V OPERATION ON RELAY # 4
BOARD P.N. 500258 REV. B
4
5 6 1 2 ( - ) +1 +2 +3 +4
3
4
5
6
FOR 24V OPERATION ON RELAY # 1
RELAY 3
CUT JUMPER FOR 24V OPERATION ON RELAY # 3
FOR 24V OPERATION ON RELAY #2
RELAY 4
ALL RELAYS ARE SHOWN IN THE NON ENERGIZED STATE. 1
2
3
4
5
6
1
2
3
4
5
CUT JUMPER FOR 24V OPERATION ON RELAY # 4
BOARD P.N. 500258 REV. B
6
1
2
3
4
5
6
1
2
3
4
5
C NC NO C NC NO
C NC NO C NC NO
C NC NO C NC NO
RELAY 1
RELAY 2
RELAY 3
RELAY 4
CM4
CM5
CM6
CM7
CM8
CM9
CM10
FAC Module Fire Alarm Control. Plugs into the primary circuit board. When a signal is received from an emergency panel it instantly unlocks all locking devices driven by the 5600 Power Supply. The module will automatically reset when the emergency signal is restored or may be wired to require a manual reset (FACMR).
POWER TRANSFORMER SECTION
6
C NC NO C NC NO
CM3
SELF-RESTORING FUSE
INTERLOCK LOGIC BOARD DynaLock Corp. P.N. 500259
C NC NO C NCCUT NOJUMPERC NC NO C NCCUT NOJUMPER
CM2
Two distribution boards, 5 and 10 outputs respectively, are available to provide fused individual tie points, to facilitate lock wiring. The output fuses are self-restoring by correcting the overload and disconnecting the line voltage for 2 minutes. A control jumper at each station selects unswitched voltage or the use of a Control Module.
INDIVIDUAL FUSED DC OUTPUTS
( - ) +1 +2 +3 +4
CUT JUMPER FOR 24V OPERATION ON RELAY # 1
DB5 / DB10 Distribution Board
DYNALOCK CORP. PN500174 PSDSBORD
INTERLOCK LOGIC BOARD DynaLock Corp. P.N. 500259
D. C. INPUTS
DB10
INPUT FROM POWER SUPPLY
TIME DELAY ADJUSTMENT 1
2
DC OUTPUT FUSE 1
2
3
4
1
2
3
4
5
1
2
3
4
CM & CMTD Modules
5
5
Control Module and Control Module with Time Delay. Plug-in isolation relay board to switch lock power. Includes auxiliary relay contacts to signal other devices such as CCTV or interlocks. The CMTD module offers the same features with the addition of an adjustable 0-80 second delay on relock.
POWER ON LED LINE INPUT FUSE
CONTROL MODULE POWER OUTPUT TO SUPPLY
DYNALOCK CORP. PN500176 PSCMBORD 1 GND
DYNALOCK CORP. PN500176 PSCMBORD
DYNALOCK CORP. PN500176 PSCMBORD
DYNALOCK CORP. PN500174 PSDSBORD
POWER OUTPUT 1 1
1
1
2
2
2
2
2 NEUT
2 LINE FUSE
3
3
3
3
4
4
4
4
5
5
5
5
3 LINE LINE INPUT 110 VAC 60 HZ
DB5/DB10 DISTRIBUTION BOARD
3
DYNALOCK CORP. PN500172 REV B PSIOBORD 4 - 97
4
FAC RELAY SOCKET
CUT JUMPER WHEN RELAY IS INSTALLED
1 2 3 REMOTE CONTROL INPUT
FAC TERMINALS
INPUT FROM POWER SUPPLY
1
AC LINE INPUT
POWER INPUT FROM SUPPLY
BATTERY INPUT
CM1
BATTERY FUSE
CM2
CM3
CM4
CM5
CM6
CM7
CM8
CM9
ILB Board
( - ) +1 +2 +3 +4
Interlock Logic Board. Four DPDT relays for control of interlocks. Each relay has an individual trigger which can be set for 12 or 24VDC input.
CM10
INDIVIDUAL FUSED DC OUTPUTS BASIC DC OUTPUT
BATTERY CONNECTION
1
2
3
4
5
PRIMARY CIRCUIT BOARD
2
1
2
3
4
5
INTERLOCK LOGIC BOARD DynaLock Corp. P.N. 500259
D. C. INPUTS
3
CUT JUMPER FOR 24V OPERATION ON RELAY # 1
CUT JUMPER FOR 24V OPERATION ON RELAY #2
CUT JUMPER FOR 24V OPERATION ON RELAY # 3
ALL RELAYS ARE SHOWN IN THE NON ENERGIZED STATE. 1
2
3
4
5
6
1
2
3
4
5
CUT JUMPER FOR 24V OPERATION ON RELAY # 4
BOARD P.N. 500258 REV. B
6
1
2
3
4
5
6
1
2
3
4
5
6
C NC NO C NC NO
C NC NO C NC NO
C NC NO C NC NO
C NC NO C NC NO
RELAY 1
RELAY 2
RELAY 3
RELAY 4
3
DynaLock For Life
TM
SM
5600 Series Power Supply
5600 Series
Heavy Duty Power Supply
Specifications MECHANICAL Enclosure: Weight: Color:
4” x 12” x 15” Steel 11 lbs. (average) add approx. 6 lbs. per battery Off-white
• • • • •
ELECTRICAL Input Power: Output Voltage: Output Current: Input Fuse: Output Fuses: DB Fuses: Basic Outputs: Module Outputs:
2A @ 115VAC, 50-60 Hz 12VDC - nominal 13.8V 24VDC - nominal 27.6V 10A @ 12VDC / 5A @ 24VDC 3A 3AG Slo Blo Battery/DC Output - 12A/6A 3AG Slo Blo Self-resetting when powered down for 2 minutes Capacity 10AWG Capacity 14 AWG
NYC MEA #23-92-E
Accessories • 6000 Series Exit Controls Push-buttons in a variety of switching configurations and exit sensor bars. • 7000 Series Access Controls Keyswitches accept most mortise cylinders for controlled access. Rugged digital entry keypads. • 8000 Series Consoles Desktop, slope front and rack mount fabricated to customer specifications.
LOCKING DEVICE
OUTPUT VOLTAGE
MAX LOAD
1300
2511
2011/3000
2268-10
3006
3101B
12VDC
10A
10
19
23
14
19
13
24VDC
5A
10
19
23
13
16
9
Recommended Wire Gauge Load Current At 12V 100 150 200 250 300 400 500 750 1000
0.25a
18 18 16 16 16 14 14 12 -
0.5a
18 16 14 14 12 12 -
0.75a
16 14 12 12 12 -
1a
14 12 12 -
Load Current At 24V 1.25a
14 12 -
1.5a
12 12 -
2a
12 -
DYNALOCK CORPORATION 705 EMMETT STREET / PO BOX 2728 BRISTOL, CT 06011-2728 PHONE: 877-DYNALOCK / FAX: 860-585-0338 E-MAIL: [email protected] WEBSITE: WWW.DYNALOCK.COM
Wire run (ft)
100 150 200 250 300 400 500 750 1000
0.25a
18 18 18 18 18 18 16 14 14
0.5a
18 18 18 16 16 14 14 12 -
0.75a
18 16 16 14 14 12 12 -
1a
18 16 14 14 12 12 -
Description
Standard Features
DynaLock 5600 Series Power Supply offers the reliability of solid state electronics and flexibility of modular design. Power more devices with this high-output supply. Use direct power output or choose one of the available expansion boards.
• Filtered and Regulated Voltage Output • Built-in Charging Circuit • Available 220VAC Input • Hinged Cover Enclosure: Off-white finish with conduit knockouts and optional key lock cover. Dimensions 4”x12”x15”. • Lifetime Warranty: Made in the USA by DynaLock, with over 20 years experience in the manufacture of electronic security & access control products.
Specify a distribution board (DB5 / DB10) for 5 or 10 individually fused outputs. Add individual control modules for switched outputs, with or without time delay. Specify the interlock logic board (ILB) option for a 4 DPDT relay board. Optional fire alarm control (FAC) relay provides integration with fire or emergency alarm system. A battery charging circuit is standard. Specify 4 or 7 amp hours, and 12 or 24 volts for battery backup.
Lock Capacity
Wire run (ft)
10A @ 12VDC / 5A @ 24VDC Up To 10 Fused Outputs Fire Alarm Tie-In Battery Back-Up Lifetime Warranty
1.25a
16 14 14 12 12 -
1.5a
16 14 12 12 12 -
2a
The DynaLock 5600 Power Supply provides clean, filtered, and regulated DC voltage. Specify for all electronic devices, including access controls, electromagnetic locks, and CCTV.
14 12 12 12 -
Optional Features • Anti-Tamper Switch (ATS) indicates unauthorized opening of the enclosure cover. • Key Lock (KLC) for enclosure cover. • Fire Alarm Control (FAC) tie point. • Power Cord (PC) for use with typical wall plug in lieu of hard-wired 120 VAC. • Individual Fused Outputs: 5 (DB5) or 10 (DB10) output distribution board. • Controlled Outputs: Individual Control Modules (CM/ CMTD) offer the flexibility of selectable inputs (NO/NC), fail-safe or fail-secure outputs, and adjustable time delay.
LIFE SAFETY PRODUCTS
Featuring
DynaLife
F U L LY I N T E G R AT E D S E C U R I T Y S Y S T E M S Electromagnetic Locks Controls Power Supplies
®
Lifetime Warranty
3/08
