5990 Series MatTop Chain Product Portfolio - MRO Supply
Rexnord® 5995 MatTop® Chain
5995
Chain Drawing
Chain Width
DIRECTION OF TRAVEL
Chain Height 0.72 in (18.2 mm)
Chain Capacity 0% - 50% 50% - 100%
Chain Bottom to Centerline 0.36 in (9.1 mm)
Photo shows 5995 MatTop® Chain molded in White Cut Resistant (WSM) material.
Min. Back-flex Radius 1.50 in (38.1 mm)
Chain Information Number of Sprockets per ft of width per m of width 2 7 4 13
Chain Pitch 2.25 in (57.2 mm)
Prefix
Chain Material
Standard Pin Material
WLT WSM
White Low Temperature White Cut Resistant
Polyethylene Polypropylene
BSM BRSM BYSM DUV HUV LF LUV RHT RSM SMB WHT YHT YSM
Black Cut Resistant Black w/ Red Ends Black w/ Yellow Ends Plain Acetal Ultraviolet Resistant High Temp. Ultraviolet Resistant Low Friction Low Temp. Ultraviolet Resistant Red High Temperature Red Cut Resistant Blue Cut Resistant White High Temperature Yellow High Temperature Yellow Cut Resistant
Polypropylene Polypropylene Polypropylene Polypropylene Polypropylene Polypropylene Polyethylene Polypropylene Polypropylene Polypropylene Polypropylene Polypropylene Polypropylene
Available Materials Temperature Fahrenheit max min min dry wet Standard Materials -100 80 80 -73 -40 180 150 -40 Made-to-Order Materials -40 180 150 -40 -40 180 150 -40 -40 180 150 -40 0 180 150 -18 40 220 180 4 -40 180 150 -40 -40 80 80 -40 40 220 212 4 -40 180 150 -40 -40 180 150 -40 40 220 212 4 40 220 212 4 -40 180 150 -40
Regulatory Information The Food and Drug Administration (FDA) accepts certain materials for direct food contact. FDA approved material is compliant to FDA 21 CFR § 177.
U.S. Patents: 4858753, 5096053, 5020659
Rexnord® 5990 Series MatTop® Chain Product Portfolio
Chain Strength lbs/ft
N/m
Approximate Weight lbs/ft2
Kg/m2
FDA Approval
27 82
27 66
1,600 23,344 3,500 51,065
2.30 3.00
11.23 14.65
Yes Yes
82 82 82 82 104 82 27 104 82 82 104 104 82
66 66 66 66 82 66 27 100 66 66 100 100 66
3,500 3,500 3,500 3,500 2,400 3,500 1,600 2,400 3,500 3,500 2,400 2,400 3,500
3.00 3.00 3.00 3.00 2.20 3.00 2.30 2.20 3.00 3.00 2.20 2.20 3.00
14.65 14.65 14.65 14.65 10.74 14.65 11.23 10.74 14.65 14.65 10.74 10.74 14.65
Yes Yes Yes No No Yes No Yes Yes Yes Yes Yes Yes
51,065 51,065 51,065 51,065 35,016 51,065 23,344 35,016 51,065 51,065 35,016 35,016 51,065
Additional Notes For chain width information see page MT - WIDTH - 1. Open area = 12.0%. Stainless steel pins are available on a made-to-order basis. Chain strength is listed at room temperature. NR = Not Recommended. For additional material information, see material portfolio.
MT - 5990 - 1
Assembled-to-Width
Rexnord and MatTop are trademarks of Rexnord Industries, LLC. All rights reserved.
Celsius max dry wet
Rexnord® 5996 MatTop® Chain
5996
Chain Drawing
Chain Width
DIRECTION OF TRAVEL
Photo shows 5996 MatTop® Chain molded in Low Friction (LF) material.
Chain Capacity 0% - 50% 50% - 100%
Chain Bottom to Centerline 0.36 in (9.1 mm)
Chain Height 0.72 in (18.2 mm)
Min. Back-flex Radius 1.50 in (38.1 mm)
Chain Information Number of Sprockets per ft of width per m of width 2 7 4 13
Chain Pitch 2.25 in (57.2 mm)
Chain Material
Prefix
Standard Pin Material
HUV LF WHT WLT
High Temp. Ultraviolet Resistant Low Friction White High Temperature White Low Temperature
Polypropylene Polypropylene Polypropylene Polyethylene
BLT BRSM BSM DUV HP™ LUV RHT WLF
Blue Low Temperature Black/Red Cut Resistant Black Cut Resistant Plain Acetal Ultraviolet Resistant High Performance Low Temp. Ultraviolet Resistant Red High Temperature White Low Friction
Polyethylene Polypropylene Polypropylene Polypropylene Polypropylene Polyethylene Polypropylene Polypropylene
Available Materials Temperature Fahrenheit max min min dry wet Standard Materials 40 220 180 4 -40 180 150 -40 40 220 212 4 -100 80 80 -73 Made-to-Order Materials -100 80 80 -73 -40 180 150 -40 -40 180 150 -40 0 180 150 -18 -40 180 150 -40 -40 80 80 -40 40 220 212 4 -40 180 150 -40
Regulatory Information
Assembled-to-Width
The Food and Drug Administration (FDA) accepts certain materials for direct food contact. FDA approved material is compliant to FDA 21 CFR § 177.
Celsius max dry wet
Chain Strength
Approximate Weight
lbs/ft
N/m
lbs/ft2
Kg/m2
FDA Approval
104 82 104 27
82 66 100 27
2,400 3,500 2,400 1,600
35,016 51,065 35,016 23,344
1.70 1.60 1.00 1.10
8.30 7.81 4.88 5.37
No Yes Yes Yes
27 82 82 82 82 27 104 82
27 66 66 66 66 27 100 66
1,600 3,500 3,500 3,500 3,500 1,600 2,400 3,500
23,344 51,065 51,065 51,065 51,065 23,344 35,016 51,065
1.80 2.30 2.30 2.30 2.30 1.80 1.70 2.30
8.79 11.23 11.23 11.23 11.23 8.79 8.30 11.23
Yes Yes Yes No Yes No Yes Yes
Additional Notes For chain width information see page MT - WIDTH - 1. Open area = 22.1%.
Rexnord and MatTop are trademarks of Rexnord Industries, LLC. All rights reserved. U.S. Patents: 4858753, 5096053, 5020659
MT - 5990 - 2
Chain strength is listed at room temperature. NR = Not Recommended. For additional material information, see material portfolio.
Rexnord® 5990 Series MatTop® Chain Product Portfolio
Chain Drawing
Chain Width
DIRECTION OF TRAVEL
Photo shows 5996 MatTop® Chain molded in White Special Acetal Antimicrobial (WSA) material.
Chain Capacity 0% - 50% 50% - 100%
Chain Bottom to Centerline 0.36 in (9.1 mm)
Chain Height 0.72 in (18.2 mm)
Min. Back-flex Radius 1.50 in (38.1 mm)
Chain Information Number of Sprockets per ft of width per m of width 2 7 4 13
Chain Pitch 2.25 in (57.2 mm)
Prefix
BLA GLD GSA RLD THD WHA WLA WSA
Chain Material
Blue Low Temperature Antimicrobial Grey Low Temp. Detectable Animicrobial Grey Special Acetal Antimicrobial Red Low Temp. Detectable Animicrobial Tan High Temp. Detectable Antimicrobial White High Temperature Antimicrobial White Low Temperature Antimicrobial White Special Acetal Antimicrobial
Standard Pin Material
Polyethylene Polyethylene Polypropylene Polyethylene Polypropylene Polypropylene Polyethylene Polypropylene
Available Materials Temperature Fahrenheit max min min dry wet Made-to-Order Materials -100 80 80 -73 -100 80 80 -73 -40 180 150 -40 -100 80 80 -73 40 220 212 4 40 220 212 4 -100 80 80 -73 -40 180 150 -40
Chain Strength
Celsius max dry wet 27 27 82 27 104 104 27 82
27 27 66 27 100 100 27 66
Approximate Weight
lbs/ft
N/m
lbs/ft2
Kg/m2
1,600 1,600 3,500 1,600 2,400 2,400 1,600 3,500
23,344 23,344 51,065 23,344 35,016 35,016 23,344 51,065
1.80 1.80 2.30 1.80 1.70 1.70 1.80 2.30
8.79 8.79 11.23 8.79 8.30 8.30 8.79 11.23
Rexnord® 5996 MatTop® Chain with Microban® Antimicrobial Product Protection
5996
FDA Approval
Yes Yes Yes Yes Yes Yes Yes Yes
These materials will not protect the user against food-borne illness. Formulated to inhibit the growth of bacteria, mold and mildew that may cause discoloration, odor or degradation of the MatTop® chain. Always maintain good hygiene, proper cleaning procedures are still required. Microban is a registered trademark of Microban Products Company.
Regulatory Information * All components used in the formulation of Microban Antimicrobial material have federal regulatory approval for direct food contact.
Rexnord, MatTop and HP are trademarks of Rexnord Industries, LLC. All rights reserved. U.S. Patents: 4858753, 5096053, 5020659 Rexnord® 5990 Series MatTop® Chain Product Portfolio
For chain width information see page MT - WIDTH - 1. Open area = 22.1%. Stainless steel pins are available on a made-to-order basis. The ability to detect plastic particles will vary due to sensitivity of individual metal detectors. All components may not be detectable. Chain strength is listed at room temperature. NR = Not Recommended. For additional material information, see material portfolio.
MT - 5990 - 3
Assembled-to-Width
*** These materials meet the end-test requirements as specified by FDA 21CFR 177.1520 (c), the FDA requirement for polyolefin materials intended for direct food contact. All components of these materials are either compliant for food contact as listed by the FDA or regulated by the EPA.
Additional Notes
Rexnord® 5997 MatTop® Chain
5997
Chain Drawing DIRECTION OF TRAVEL
DIRECTION OF TRAVEL
Preferred Direction of Travel for Tunnels
)
Chain Width
(
Chain Height to Top of Ribs 0.97 in (24.6 mm)
Chain Capacity 0% - 50% 50% - 100%
Min. Back-flex Radius 2.75 in (69.9 mm)
Chain Information Number of Sprockets with Transfer Comb without Transfer Comb per ft per m per ft per m 4 13 2 7 4 13 4 13
Chain Height 0.72 in (18.2 mm)
Chain Bottom to Centerline 0.36 in (9.1 mm)
Photo shows 5997 MatTop® Chain, molded in High Temperature (HT) material.
Chain Pitch 2.25 in (57.2 mm)
Chain Material
Prefix
Standard Pin Material
HT USP
High Temperature Ultra Stabilized Polypropylene
Polypropylene Polypropylene
WHT
White High Temperature
Polypropylene
Available Materials Temperature Fahrenheit max min min dry wet Standard Materials 40 220 212 4 40 220 212 4 Made-to-Order Materials 40 220 212 4
Regulatory Information
Assembled-to-Width
The Food and Drug Administration (FDA) accepts certain materials for direct food contact. FDA approved material is compliant to FDA 21 CFR § 177. Rexnord and MatTop are trademarks of Rexnord Industries, LLC. All rights reserved. U.S. Patents: 4858753, 5096053, 5020659
MT - 5990 - 4
Celsius max dry wet
Chain Strength lbs/ft
N/m
Approximate Weight lbs/ft2
Kg/m2
FDA Approval
104 104
100 100
2,400 35,016 2,400 35,016
2.20 2.20
10.74 10.74
Yes No
104
100
2,400 35,016
2.20
10.74
Yes
Additional Notes For chain width information see page MT - WIDTH - 1. Open area = 22.3%. Stainless steel pins are available on a made-to-order basis. Chain strength is listed at room temperature. NR = Not Recommended. For additional material information, see material portfolio.
Rexnord® 5990 Series MatTop® Chain Product Portfolio
Rexnord® 5998 MatTop® Chain
5998
Chain Drawing
Chain Width
DIRECTION OF TRAVEL
Photo shows 5998 MatTop® Chain molded in White High Temperature (WHT) material.
Chain Capacity 0% - 50% 50% - 100%
Min. Back-flex Radius 1.50 in (38.1 mm)
Chain Information Number of Sprockets per ft of width per m of width 2 7 4 13
Chain Bottom to Centerline 0.36 in (9.1 mm)
Chain Height 0.72 in (18.2 mm)
Chain Pitch 2.25 in (57.2 mm)
Prefix
Chain Material
Standard Pin Material
WHT WLT
White High Temperature White Low Temperature
Polypropylene Polyethylene
BLT BSM DUV HS HT HUV LUV RHT WD
Blue Low Temperature Black Cut Resistant Plain Acetal Ultraviolet Resistant Heat Stabilized High Temperature High Temp. Ultraviolet Resistant Low Temp. Ultraviolet Resistant Red High Temperature White Plain Acetal
Polyethylene Polypropylene Polypropylene Polypropylene Polypropylene Polypropylene Polyethylene Polypropylene Polypropylene
Available Materials Temperature Fahrenheit max min min dry wet Standard Materials 40 220 212 4 -100 80 80 -73 Made-to-Order Materials -100 80 80 -73 -40 180 150 -40 0 180 150 -18 -40 220 212 -40 40 220 212 4 40 220 180 4 -40 80 80 -40 40 220 212 4 -40 180 150 -40
Regulatory Information The Food and Drug Administration (FDA) accepts certain materials for direct food contact. FDA approved material is compliant to FDA 21 CFR § 177.
Chain Strength lbs/ft
N/m
Approximate Weight lbs/ft2
Kg/m2
FDA Approval
104 27
100 27
2,400 35,016 1,600 23,344
1.70 1.80
8.30 8.79
Yes Yes
27 82 82 104 104 104 27 104 82
27 66 66 100 100 82 27 100 66
1,600 3,500 3,500 3,500 2,400 2,400 1,600 2,400 3,500
1.80 2.30 2.30 2.30 1.70 1.70 1.80 1.70 2.30
8.79 11.23 11.23 11.23 8.30 8.30 8.79 8.30 11.23
Yes Yes No No Yes No No Yes Yes
23,344 51,065 51,065 51,065 35,016 35,016 23,344 35,016 51,065
Additional Notes For chain width information see page MT - WIDTH - 1. Open area = 45.0%. Stainless steel pins are available on a made-to-order basis. Chain strength is listed at room temperature. NR = Not Recommended.
U.S. Patents: 5816390, 5573106
Rexnord® 5990 Series MatTop® Chain Product Portfolio
For additional material information, see material portfolio.
MT - 5990 - 5
Assembled-to-Width
Rexnord, MatTop and HP are trademarks of Rexnord Industries, LLC. All rights reserved.
Celsius max dry wet
Chain Drawing
Chain Width
DIRECTION OF TRAVEL
Chain Height 0.72 in (18.2 mm)
Photo shows 5998 MatTop® Chain molded in White Special Acetal Antimicrobial (WSA) material.
Chain Capacity 0% - 50% 50% - 100%
Chain Bottom to Centerline 0.36 in (9.1 mm)
Rexnord® 5998 MatTop® Chain with Microban® Antimicrobial Product Protection
5998
Min. Back-flex Radius 1.50 in (38.1 mm)
Chain Information Number of Sprockets per ft of width per m of width 2 7 4 13
Chain Pitch 2.25 in (57.2 mm)
Chain Material
Prefix
BHA BLA GLD GSA RLD THD WHA WLA WSA
Blue High Temperature Antimicrobial Blue Low Temperature Antimicrobial Grey Low Temp. Detectable Animicrobial Grey Special Acetal Antimicrobial Red Low Temp. Detectable Animicrobial Tan High Temp. Detectable Antimicrobial White High Temperature Antimicrobial White Low Temperature Antimicrobial White Special Acetal Antimicrobial
Standard Pin Material
Polypropylene Polyethylene Polyethylene Polypropylene Polyethylene Polypropylene Polypropylene Polyethylene Polypropylene
Available Materials Temperature Fahrenheit max min min dry wet Made-to-Order Materials 40 220 212 4 -100 80 80 -73 -100 80 80 -73 -40 180 150 -40 -100 80 80 -73 40 220 212 4 40 220 212 4 -100 80 80 -73 -40 180 150 -40
Chain Strength
Celsius max dry wet 104 27 27 82 27 104 104 27 82
100 27 27 66 27 100 100 27 66
Approximate Weight
lbs/ft
N/m
lbs/ft2
Kg/m2
2,400 1,600 1,600 3,500 1,600 2,400 2,400 1,600 3,500
35,016 23,344 23,344 51,065 23,344 35,016 35,016 23,344 51,065
1.70 1.80 1.80 2.30 1.80 1.70 1.70 1.80 2.30
8.30 8.79 8.79 11.23 8.79 8.30 8.30 8.79 11.23
FDA Approval
Yes Yes Yes Yes Yes Yes Yes Yes Yes
These materials will not protect the user against food-borne illness. Formulated to inhibit the growth of bacteria, mold and mildew that may cause discoloration, odor or degradation of the MatTop® chain. Always maintain good hygiene, proper cleaning procedures are still required. Microban is a registered trademark of Microban Products Company.
Assembled-to-Width
Regulatory Information * All components used in the formulation of Microban Antimicrobial material have federal regulatory approval for direct food contact. *** These materials meet the end-test requirements as specified by FDA 21CFR 177.1520 (c), the FDA requirement for polyolefin materials intended for direct food contact. All components of these materials are either compliant for food contact as listed by the FDA or regulated by the EPA. Rexnord, MatTop and HP are trademarks of Rexnord Industries, LLC. All rights reserved. U.S. Patents: 5816390, 5573106 MT - 5990 - 6
Additional Notes For chain width information see page MT - WIDTH - 1. Open area = 45.0%. Stainless steel pins are available on a made-to-order basis. The ability to detect plastic particles will vary due to sensitivity of individual metal detectors. All components may not be detectable. Chain strength is listed at room temperature. NR = Not Recommended. For additional material information, see material portfolio.
Rexnord® 5990 Series MatTop® Chain Product Portfolio
SS5996 Stainless Steel Sprocket
0.56 in (14.2 mm) Face Width
actual 9
effect 9
Pitch Diameter in mm 6.579 167.11
0.62 in (15.7 mm) Face Width
Outside Diameter in 6.46
mm 164.1
Length thru Bore 1.50 in (38.1 mm)
Bore Diameter Pitch Diameter Outside Diameter
Bore Diameter Pitch Diameter Outside Diameter
0.63 in (16.0 mm) Face Width
Length thru Bore 1.62 in (41.1 mm)
Number Of Teeth
N5996 Thermoplastic Sprocket
Length thru Bore 1.88 in* (47.6 mm)
5996 Semi-Steel Sprocket Information Bore Diameter (Shaft-Ready) Round Square in mm in mm min max min max min max min max 1 2 -
Bore Diameter (Round) in min 1
mm max 2
min -
max -
Bore Diameter Pitch Diameter Outside Diameter
5996 Semi-Steel Sprocket
Approximate Weight lbs 4.08
kg 1.85
Number Of Teeth actual 9 14
Pitch Diameter
effect in mm 9 6.579 167.11 14 10.111 256.82
SS5996 Stainless Steel Sprocket Information Bore Diameter (Shaft-Ready)
Outside Diameter in 6.46 9.98
Round
mm 164.1 253.5
in -
Number Pitch Outside of Teeth Diameter Diameter actual effect in mm in mm 7 7 5.186 131.72 4.94 125.5 9 9 6.579 167.11 6.46 164.1 14 14 10.111 256.82 10.10 256.5 17 17 12.245 311.02 12.36 313.9
Bore Diameter (Round)
Square mm -
in 2 1/2 2 1/2
mm -
in -
mm -
Approximate Weight lbs 4.82 7.50
kg 2.19 3.40
N5996 Thermoplastic Sprocket Imperial Information Imperial Bore Diameter Round in
Hex in 2 2 -
2 1/2 1 3/16 1 1/4 1 3/8 1 7/16 1 1/2 1 3/4 1 15/16 2 1/2 -
2 2 -
Square in
1 1/2 - 2 7/16 - 1 1/2 2 3/16 - 3 7/16 -
2 2 -
2 1/2 3 1/2 2 1/2 3 1/2 2 1/2 -
Approximate Weight lbs kg 0.49 0.22 0.88 0.40 1.60 0.73 1.71 0.78
Shaft-ready round bore sprockets are shipped with keyway and setscrew. *17T sprocket length through bore dimension is 2.25 in (57.2 mm).
N5996 Thermoplastic Sprocket Metric Information Number Pitch Outside of Teeth Diameter Diameter actual effect in mm in mm 7 7 5.186 131.72 4.94 125.5 9 9 6.579 167.11 6.46 164.1 14 14 10.111 256.82 10.10 256.5
Metric Bore Diameter Hex mm 50
Square mm 65
40 40 40
50 50
65 65
90
Approximate Weight lbs kg 0.49 0.22 0.88 0.40 1.60 0.73
Shaft-ready round bore sprockets are shipped with keyway and setscrew.
Rexnord® 5990 Series MatTop® Chain Product Portfolio
MT - 5990 - 7
Rexnord® 5990 Series MatTop® Chain Compatible Sprockets
Shaft-ready round bore sprockets are shipped with keyway and setscrew.
HS5996 Thermoplastic Sprocket 0.62 in (15.7 mm) Face Width
Length thru Bore 2.06 in (52.3 mm)
®® Rexnord ****** SeriesMatTop MatTop®®Chain ChainCompatible CompatilbleSprockets Sprockets Rexnord 5990 Series
actual 9 12 14
Pitch Diameter
Length thru Bore 1.88 in (47.6 mm)
Outside Diameter
effect in mm in 9 6.579 167.11 6.46 12 8.693 220.80 8.70 14 10.111 256.82 10.03
mm 164.1 221.0 254.8
min 1 1 1
0.62 in (15.7 mm) Face Width Bore Diameter Pitch Diameter Outside Diameter
Bore Diameter Pitch Diameter Outside Diameter
0.62 in (15.7 mm) Face Width
Number Of Teeth
PE5996 Thermoplastic Sprocket
Length thru Bore 1.88 in (47.6 mm)
NS5996 Thermoplastic Split Sprocket Information Bore Diameter (Shaft-Ready) Round Square in mm in mm max min max min max min max 2 3/4 25 70 1 3 1/2* 25 90* 2 3/4 25 70 1 3 1/2* 25 90* 4 1/2 25 120 1 4 1/2** 25 120**
Bore Diameter (Idler) in
Approximate Weight
mm
min 1 1 1
max 2 3/4 2 3/4 3 1/2
min 25 25 25
Bore Diameter Pitch Diameter Outside Diameter
NS5996 Thermoplastic Split Sprocket
max 70 70 90
lbs 1.68 1.98 2.12
kg 0.76 0.90 0.96
* The 3-1/2 in and 90 mm bores for the 9 and 12 tooth square bore sprockets are supplied as molded bores. All other bores are supplied with split bore adapters. ** The 3-1/2 in, 4-1/2 in, 90 mm and 120 mm bores for the14 tooth square bore sprockets are supplied as molded bores. All other bores are supplied with split bore adapters. Imperial shaft-ready round bore sprockets are shipped with keyway and setscrew. Metric shaft-ready round bore sprockets are shipped with keyway and no setscrew. Idler boards are designed to spin freely on the shaft. Similar bore sizes are available with the use of split plastic adapters.
Number of Teeth actual effect 9 9
Pitch Diameter in mm 6.579 167.11
Outside Diameter in mm 6.46 164.1
HS5996 Thermoplastic Sprocket Imperial Information Imperial Bore Diameter Square in 1 1/2 in 2 in
Approximate Weight in mm 0.88 0.40
3 1/2 in
Shaft-ready round bore sprockets are shipped with keyway and setscrew.
HS5996 Thermoplastic Sprocket Metric Information Metric Bore Diameter Square mm
Number Pitch Outside of Teeth Diameter Diameter actual effect in mm in mm 9 9 6.579 167.11 6.46 164.1 14 14 10.111 256.82 10.10 256.5
40 -
Approximate Weight in mm 0.88 0.40 1.60 0.73
90
Shaft-ready round bore sprockets are shipped with keyway and setscrew.
PE5996 Thermoplastic Sprocket Imperial Information Number of Teeth actual effect 7 7 9 9
Pitch Diameter in mm 5.186 131.72 6.579 167.11
Outside Diameter in mm 4.94 125.5 6.46 164.1
Imperial Bore Diameter
1 3/16
Round in 1 1/4
Square in 2 7/16
1 1/2 1 1/2
2
2 1/2
-
Approximate Weight lbs kg 0.38 0.17 0.69 0.31
Shaft-ready round bore sprockets are shipped with keyway and setscrew.
MT - 5990 - 8
Rexnord® 5990 Series MatTop® Chain Product Portfolio
Pusher Attachment (F-Style) All pusher attachments are molded 6 in (152.4 mm) wide and can be cut down to a minimum height of 1/4 in (6.35 mm). The F4 designation represents an F-style pusher attachment at a height of 4 in (101.6 mm).
Please indicate if pusher attachments are required every pitch, every second pitch, etc. when ordering. Also, indicate if indents are required in the center, on one or both sides of the chain. For example, “I would like F4 pusher attachments every 8th pitch indented 3/4 in on both sides of the chain.” For 5996 chain only.
Pusher Width 6.00 in (152.4 mm) Indenting Per Order Standard Pusher Height 4.00 in or 5.00 in (101.6 mm) or (127.0 mm)
Pusher Attachment (F-Style)
The F4 designation represents an F-style pusher attachment at a height of 4 in (101.6 mm).
Please indicate if pusher attachments are required every pitch, every second pitch, etc. when ordering. Also, indicate if indents are required in the center, on one or both sides of the chain. For example, “I would like F4 pusher attachments every 8th pitch indented 3/4 in on both sides of the chain.” For 5998 chain only.
Pusher Width 6.00 in (152.4 mm) Standard Pusher Height 4.00 in (101.6 mm)
Indenting Per Order
Sideguard Attachment Please indicate if sideguard attachments are required down one or both sides of the chain when ordering.
Please contact Rexnord Industries, Inc if any deviations from this standard are required. Direction of Travel
Attachment Width 5.00 in (127.0 mm)
Attachment Height 4.00 in (101.6 mm)
Attachment Offset 0.55 in (14.0 mm)
Sideguard attachments can be cut down to a minimum height of 1 in (25.4 mm).
If the chain is ordered with both sideguard and pusher attachments, the sideguard attachment will be furnished the same height as the pusher attachment.
Rexnord® 5990 Series MatTop® Chain Product Portfolio
MT - 5990 - 9
Rexnord® 5990 Series MatTop® Chain Accessories
All pusher attachments are molded 6 in (152.4 mm) wide and can be cut down to a minimum height of 1/4 in (6.35 mm).
Pusher Attachement (T1 - Style) All pusher attachments are molded 6 in (152.4 mm) wide. The T1 designation represents an T-style pusher atachement at a height of 1 in (25.4 mm). For 5995 chain only.
Please indicate if pusher attachments are required every second pitch, every fourth pitch, etc. When ordering. Standard indents are 3.00 in (76.2 mm) starting at 3.38 in (85.9 mm) placed on even pitch locations (ie. Every 2nd, 4th, 6th, etc). For example, “I would like an 18” width T1 pusher attachement every 8th ptich indented 12” on the right side of the chain.”
TYP Cleat 1.25 in (31.8 mm)
Attachment Height 1.00 in (25.4 mm)
Attachment Width 6.00 in (152.4 mm)
TYP Notch 0.75 in (19.0 mm) TYP Indent 0.38 in (9.5 mm)
Pusher Attachement (T2 - Style)
Rexnord® 5990 Series MatTop® Chain Accessories
All pusher attachmetns are molded 6 in (152.4 mm) wide. The T2 designation represents an T-style pusher atachement at a height of 2 in (50.8 mm). For 5995 chain only.
TYP Cleat 1.50 in (38.1 mm)
Please indicate if pusher attachments are required every second pitch, every fourth pitch, etc. When ordering. Standard indents are 3.00 in (76.2 mm) starting at 3.75 in (95.3 mm) placed on even pitch locations (ie. Every 2nd, 4th, 6th, etc). For example, “I would like an 18” width T2 pusher attachement every 8th ptich indented 12” on the right side of the chain.”
Attachment Height 2.00 in (50.8 mm) TYP Notch 1.50 in (38.1 mm) Attachment Width 6.00 in (152.4 mm) TYP Indent 0.75 in (19.0 mm)
MT - 5990 - 10
Rexnord® 5990 Series MatTop® Chain Product Portfolio
4707/5997 Transfer Comb Kit
Center to Center of Slots
Plate Thickness 0.25 in (6.4 mm)
Plate Length
Slot Width
Top of Teeth to Plate Edge
Centerline of Slot to Plate Edge
Plate Width 5.92 in (150.4 mm)
The 114-222-1 transfer comb is molded in white acetal. The 114-683-1 and 114-1010-1 tranfer combs are molded in a proprietary black internally lubricated high temerature material. Transfer comb kits are supplied with 1/4 x 20 screws and slot caps.
Transfer Comb Kit Number 614-72-1 614-73-1 614-74-1
Transfer Plate Screw Part Slot Caps Part Number Number Part Number 114-222-1 114-683-1 114-1010-1
114-870-1 114-870-1 114-870-1
114-869-2 114-1009-2 114-1009-2
Plate Length in 5.75 8.50 7.50
Centerline of Slot to Plate Edge
Slot Width
mm 146.1 215.9 190.5
in 0.75 1.50 1.50
mm 19.1 38.1 38.1
in 1.00 2.00 1.00
mm 25.4 50.8 25.4
Top of Teeth to Plate Edge in 2.24 3.50 2.50
Center to Center of Slots
mm 56.9 88.9 63.5
in 4.00 3.25 3.25
mm 101.6 82.6 82.6
Approximate Weight lbs 0.24 0.28 0.30
kg 0.11 0.13 0.14
Mounting Plate Thickness 0.25 in (6.4 mm)
Top of Plate to Rib Bottom 0.60 in (15.2 mm)
Plate Length
¼' Diameter Bolt
Plate Edge to Rib Edge 2.33 in (59.2 mm)
Plate Edge to Notch Edge 1.46 in (37.1 mm)
Centerline of Slot to Plate Edge 1.00 in (25.4 mm)
Slot Width 1.50 in (38.1 mm)
Plate Width 5.94 in (150.6 mm) Center to Center of Slots 3.25 in (82.6 mm)
Top of Teeth to Plate Edge 4.40 in (111.8 mm)
4707/5997/Fortex Heavy) Duty Transfer Comb Kit
Plate Thickness 0.50 in (12.7 mm)
Transfer combs are molded in a proprietary black internally lubricated high temperature material. Tranfer comb kits are supplied with 1/4 x 20 screws and slot caps. For 5997, 4707 and 9200 chains only. The 114-3275-1 transfer comb has the bottom rib removed. Transfer Comb Kit Number 614-266-1 614-267-1 614-268-1
Transfer Plate Screw Part Slot Caps Part Number Number Part Number 114-5346-1 114-5347-1 114-3275-1
114-870-1 114-870-1 114-870-1
114-1009-2 114-1009-2 114-1009-2
Plate Length in 6.18 7.95 7.95
Rexnord® 5990 Series MatTop® Chain Product Portfolio
mm 157.0 201.9 201.9
Slot Width in 1.50 1.50 1.50
mm 38.1 38.1 38.1
Centerline of Slot Top of Teeth to to Plate Edge Plate Edge in 1.00 1.00 1.00
mm 25.4 25.4 25.4
in 4.40 4.40 4.40
mm 111.8 111.8 111.8
Center to Center of Slots in 3.25 3.25 3.25
mm 82.6 82.6 82.6
Approximate Weight lbs 0.48 0.53 0.53
kg 0.22 0.24 0.24
MT - 5990 - 11
Rexnord® 5990 Series MatTop® Chain Accessories
For 5997 and 4707 chans only.
5997/Fortrex Retrofit Transfer Comb Kit Plate Width 5.91 in (150.0 mm) Center to Center of Slots 3.00 in (76.2 mm)
Plate Length
Slot Width 1.50 in (38.1 mm)
Top of Teeth to Plate Edge 7.00 in (177.8 mm)
Center to Center of Slots 2 2.25 in (57.2 mm) Centerline of Slot to Plate Edge 5.38 in (136.6 mm)
Plate Thickness 0.31 in (7.9 mm)
Rexnord® 5990 Series MatTop® Chain Accessories
¼' Diameter Bolt
Transfer combs are molded in a proprietary black internally lubricated high temperature material. The 614-726-1 and 614-727-1 transfer comb kits are supplied with 1/4 x 20 screws and slot caps. The 614-726-2 and 614-727-2 transfer comb kits are supplied with M6 x 1 screws and slot caps. For 5997 and 9200 chains only. Transfer Comb Kit Number
Transfer Plate Screw Part Slot Caps Part Number Number Part Number
614-726-1 614-726-2 614-727-1 614-727-2
114-5200-1 114-870-1 114-1009-2 114-5200-1 I0000683291 114-1009-2 114-5201-1 114-870-1 114-1009-2 114-5201-1 I0000683291 114-1009-2
MT - 5990 - 12
Plate Length in 11.00 11.00 9.75 9.75
mm 38.1 38.1 247.7 247.7
Slot Width in 1.50 1.50 1.50 1.50
mm 38.1 38.1 38.1 38.1
Distance From Distance From Distance Between Centerline of Slot Top of Teeth to Center to Center to Plate Edge Plate Edge of Slots in 5.38 5.38 5.38 5.38
mm 136.7 136.7 136.7 136.7
in 7.00 7.00 7.00 7.00
mm 177.8 177.8 177.8 177.8
in 3.00 3.00 3.00 3.00
mm 76.2 76.2 76.2 76.2
Approximate Weight lbs 0.31 0.31 0.28 0.28
kg 0.14 0.14 0.13 0.13
Rexnord® 5990 Series MatTop® Chain Product Portfolio
DTS®-C Transfer Comb Kit
Plate Length 9.01 in (228.9 mm)
Plate Height 1.83 in (46.5 mm)
Slot Width 1.69 in (42.9 mm)
Mounting Plate Thickness 0.25 in (6.4 mm)
Rexnord® 5990 Series MatTop® Chain Accessories
Plate Width 5.96 in (151.4 mm)
Center to Center of Slots 3.00 in (76.2 mm)
DTS®-C Transfer Plate 114-4151-1 Wearstrip 114-4160-1
Steel Mounting Plate
Wearstrip Dimensions
0.20 in (5.1 mm)
(Not Supplied By Rexnord)
0.18 in (4.6 mm) 2.25 in (57.2 mm)
Cap Screws 114-870-1 (¼-20 Thread)
DTS-C Component Part Numbers Wearstrip Component Kit Comb Screw Part Number Raised Rib Description Part Number Part Number Part Number Chain (10 ft length) 4707, 5997, DTS-C 614448-1 114-4151-1 114-870-1 NA Comb Kit 9217, 9227, Wearstrip NA 114-4160-1 or 9237
For Use With: DTS Chain
Takeaway Chain
7705DTS-450
7705, 7706 or 1055
Each kit includes one comb and two mounting screws. Wearstrip is sold in 10 ft (3.048 m) lengths and is sold separately.
Rexnord® 5990 Series MatTop® Chain Product Portfolio
MT - 5990 - 13
5995
Chain Drawing
Chain Width
DIRECTION OF TRAVEL
Chain Height 0.72 in (18.2 mm)
Chain Capacity 0% - 50% 50% - 100%
Chain Bottom to Centerline 0.36 in (9.1 mm)
Photo shows 5995 MatTop® Chain molded in White Cut Resistant (WSM) material.
Min. Back-flex Radius 1.50 in (38.1 mm)
Chain Information Number of Sprockets per ft of width per m of width 2 7 4 13
Chain Pitch 2.25 in (57.2 mm)
Prefix
Chain Material
Standard Pin Material
WLT WSM
White Low Temperature White Cut Resistant
Polyethylene Polypropylene
BSM BRSM BYSM DUV HUV LF LUV RHT RSM SMB WHT YHT YSM
Black Cut Resistant Black w/ Red Ends Black w/ Yellow Ends Plain Acetal Ultraviolet Resistant High Temp. Ultraviolet Resistant Low Friction Low Temp. Ultraviolet Resistant Red High Temperature Red Cut Resistant Blue Cut Resistant White High Temperature Yellow High Temperature Yellow Cut Resistant
Polypropylene Polypropylene Polypropylene Polypropylene Polypropylene Polypropylene Polyethylene Polypropylene Polypropylene Polypropylene Polypropylene Polypropylene Polypropylene
Available Materials Temperature Fahrenheit max min min dry wet Standard Materials -100 80 80 -73 -40 180 150 -40 Made-to-Order Materials -40 180 150 -40 -40 180 150 -40 -40 180 150 -40 0 180 150 -18 40 220 180 4 -40 180 150 -40 -40 80 80 -40 40 220 212 4 -40 180 150 -40 -40 180 150 -40 40 220 212 4 40 220 212 4 -40 180 150 -40
Regulatory Information The Food and Drug Administration (FDA) accepts certain materials for direct food contact. FDA approved material is compliant to FDA 21 CFR § 177.
U.S. Patents: 4858753, 5096053, 5020659
Rexnord® 5990 Series MatTop® Chain Product Portfolio
Chain Strength lbs/ft
N/m
Approximate Weight lbs/ft2
Kg/m2
FDA Approval
27 82
27 66
1,600 23,344 3,500 51,065
2.30 3.00
11.23 14.65
Yes Yes
82 82 82 82 104 82 27 104 82 82 104 104 82
66 66 66 66 82 66 27 100 66 66 100 100 66
3,500 3,500 3,500 3,500 2,400 3,500 1,600 2,400 3,500 3,500 2,400 2,400 3,500
3.00 3.00 3.00 3.00 2.20 3.00 2.30 2.20 3.00 3.00 2.20 2.20 3.00
14.65 14.65 14.65 14.65 10.74 14.65 11.23 10.74 14.65 14.65 10.74 10.74 14.65
Yes Yes Yes No No Yes No Yes Yes Yes Yes Yes Yes
51,065 51,065 51,065 51,065 35,016 51,065 23,344 35,016 51,065 51,065 35,016 35,016 51,065
Additional Notes For chain width information see page MT - WIDTH - 1. Open area = 12.0%. Stainless steel pins are available on a made-to-order basis. Chain strength is listed at room temperature. NR = Not Recommended. For additional material information, see material portfolio.
MT - 5990 - 1
Assembled-to-Width
Rexnord and MatTop are trademarks of Rexnord Industries, LLC. All rights reserved.
Celsius max dry wet
Rexnord® 5996 MatTop® Chain
5996
Chain Drawing
Chain Width
DIRECTION OF TRAVEL
Photo shows 5996 MatTop® Chain molded in Low Friction (LF) material.
Chain Capacity 0% - 50% 50% - 100%
Chain Bottom to Centerline 0.36 in (9.1 mm)
Chain Height 0.72 in (18.2 mm)
Min. Back-flex Radius 1.50 in (38.1 mm)
Chain Information Number of Sprockets per ft of width per m of width 2 7 4 13
Chain Pitch 2.25 in (57.2 mm)
Chain Material
Prefix
Standard Pin Material
HUV LF WHT WLT
High Temp. Ultraviolet Resistant Low Friction White High Temperature White Low Temperature
Polypropylene Polypropylene Polypropylene Polyethylene
BLT BRSM BSM DUV HP™ LUV RHT WLF
Blue Low Temperature Black/Red Cut Resistant Black Cut Resistant Plain Acetal Ultraviolet Resistant High Performance Low Temp. Ultraviolet Resistant Red High Temperature White Low Friction
Polyethylene Polypropylene Polypropylene Polypropylene Polypropylene Polyethylene Polypropylene Polypropylene
Available Materials Temperature Fahrenheit max min min dry wet Standard Materials 40 220 180 4 -40 180 150 -40 40 220 212 4 -100 80 80 -73 Made-to-Order Materials -100 80 80 -73 -40 180 150 -40 -40 180 150 -40 0 180 150 -18 -40 180 150 -40 -40 80 80 -40 40 220 212 4 -40 180 150 -40
Regulatory Information
Assembled-to-Width
The Food and Drug Administration (FDA) accepts certain materials for direct food contact. FDA approved material is compliant to FDA 21 CFR § 177.
Celsius max dry wet
Chain Strength
Approximate Weight
lbs/ft
N/m
lbs/ft2
Kg/m2
FDA Approval
104 82 104 27
82 66 100 27
2,400 3,500 2,400 1,600
35,016 51,065 35,016 23,344
1.70 1.60 1.00 1.10
8.30 7.81 4.88 5.37
No Yes Yes Yes
27 82 82 82 82 27 104 82
27 66 66 66 66 27 100 66
1,600 3,500 3,500 3,500 3,500 1,600 2,400 3,500
23,344 51,065 51,065 51,065 51,065 23,344 35,016 51,065
1.80 2.30 2.30 2.30 2.30 1.80 1.70 2.30
8.79 11.23 11.23 11.23 11.23 8.79 8.30 11.23
Yes Yes Yes No Yes No Yes Yes
Additional Notes For chain width information see page MT - WIDTH - 1. Open area = 22.1%.
Rexnord and MatTop are trademarks of Rexnord Industries, LLC. All rights reserved. U.S. Patents: 4858753, 5096053, 5020659
MT - 5990 - 2
Chain strength is listed at room temperature. NR = Not Recommended. For additional material information, see material portfolio.
Rexnord® 5990 Series MatTop® Chain Product Portfolio
Chain Drawing
Chain Width
DIRECTION OF TRAVEL
Photo shows 5996 MatTop® Chain molded in White Special Acetal Antimicrobial (WSA) material.
Chain Capacity 0% - 50% 50% - 100%
Chain Bottom to Centerline 0.36 in (9.1 mm)
Chain Height 0.72 in (18.2 mm)
Min. Back-flex Radius 1.50 in (38.1 mm)
Chain Information Number of Sprockets per ft of width per m of width 2 7 4 13
Chain Pitch 2.25 in (57.2 mm)
Prefix
BLA GLD GSA RLD THD WHA WLA WSA
Chain Material
Blue Low Temperature Antimicrobial Grey Low Temp. Detectable Animicrobial Grey Special Acetal Antimicrobial Red Low Temp. Detectable Animicrobial Tan High Temp. Detectable Antimicrobial White High Temperature Antimicrobial White Low Temperature Antimicrobial White Special Acetal Antimicrobial
Standard Pin Material
Polyethylene Polyethylene Polypropylene Polyethylene Polypropylene Polypropylene Polyethylene Polypropylene
Available Materials Temperature Fahrenheit max min min dry wet Made-to-Order Materials -100 80 80 -73 -100 80 80 -73 -40 180 150 -40 -100 80 80 -73 40 220 212 4 40 220 212 4 -100 80 80 -73 -40 180 150 -40
Chain Strength
Celsius max dry wet 27 27 82 27 104 104 27 82
27 27 66 27 100 100 27 66
Approximate Weight
lbs/ft
N/m
lbs/ft2
Kg/m2
1,600 1,600 3,500 1,600 2,400 2,400 1,600 3,500
23,344 23,344 51,065 23,344 35,016 35,016 23,344 51,065
1.80 1.80 2.30 1.80 1.70 1.70 1.80 2.30
8.79 8.79 11.23 8.79 8.30 8.30 8.79 11.23
Rexnord® 5996 MatTop® Chain with Microban® Antimicrobial Product Protection
5996
FDA Approval
Yes Yes Yes Yes Yes Yes Yes Yes
These materials will not protect the user against food-borne illness. Formulated to inhibit the growth of bacteria, mold and mildew that may cause discoloration, odor or degradation of the MatTop® chain. Always maintain good hygiene, proper cleaning procedures are still required. Microban is a registered trademark of Microban Products Company.
Regulatory Information * All components used in the formulation of Microban Antimicrobial material have federal regulatory approval for direct food contact.
Rexnord, MatTop and HP are trademarks of Rexnord Industries, LLC. All rights reserved. U.S. Patents: 4858753, 5096053, 5020659 Rexnord® 5990 Series MatTop® Chain Product Portfolio
For chain width information see page MT - WIDTH - 1. Open area = 22.1%. Stainless steel pins are available on a made-to-order basis. The ability to detect plastic particles will vary due to sensitivity of individual metal detectors. All components may not be detectable. Chain strength is listed at room temperature. NR = Not Recommended. For additional material information, see material portfolio.
MT - 5990 - 3
Assembled-to-Width
*** These materials meet the end-test requirements as specified by FDA 21CFR 177.1520 (c), the FDA requirement for polyolefin materials intended for direct food contact. All components of these materials are either compliant for food contact as listed by the FDA or regulated by the EPA.
Additional Notes
Rexnord® 5997 MatTop® Chain
5997
Chain Drawing DIRECTION OF TRAVEL
DIRECTION OF TRAVEL
Preferred Direction of Travel for Tunnels
)
Chain Width
(
Chain Height to Top of Ribs 0.97 in (24.6 mm)
Chain Capacity 0% - 50% 50% - 100%
Min. Back-flex Radius 2.75 in (69.9 mm)
Chain Information Number of Sprockets with Transfer Comb without Transfer Comb per ft per m per ft per m 4 13 2 7 4 13 4 13
Chain Height 0.72 in (18.2 mm)
Chain Bottom to Centerline 0.36 in (9.1 mm)
Photo shows 5997 MatTop® Chain, molded in High Temperature (HT) material.
Chain Pitch 2.25 in (57.2 mm)
Chain Material
Prefix
Standard Pin Material
HT USP
High Temperature Ultra Stabilized Polypropylene
Polypropylene Polypropylene
WHT
White High Temperature
Polypropylene
Available Materials Temperature Fahrenheit max min min dry wet Standard Materials 40 220 212 4 40 220 212 4 Made-to-Order Materials 40 220 212 4
Regulatory Information
Assembled-to-Width
The Food and Drug Administration (FDA) accepts certain materials for direct food contact. FDA approved material is compliant to FDA 21 CFR § 177. Rexnord and MatTop are trademarks of Rexnord Industries, LLC. All rights reserved. U.S. Patents: 4858753, 5096053, 5020659
MT - 5990 - 4
Celsius max dry wet
Chain Strength lbs/ft
N/m
Approximate Weight lbs/ft2
Kg/m2
FDA Approval
104 104
100 100
2,400 35,016 2,400 35,016
2.20 2.20
10.74 10.74
Yes No
104
100
2,400 35,016
2.20
10.74
Yes
Additional Notes For chain width information see page MT - WIDTH - 1. Open area = 22.3%. Stainless steel pins are available on a made-to-order basis. Chain strength is listed at room temperature. NR = Not Recommended. For additional material information, see material portfolio.
Rexnord® 5990 Series MatTop® Chain Product Portfolio
Rexnord® 5998 MatTop® Chain
5998
Chain Drawing
Chain Width
DIRECTION OF TRAVEL
Photo shows 5998 MatTop® Chain molded in White High Temperature (WHT) material.
Chain Capacity 0% - 50% 50% - 100%
Min. Back-flex Radius 1.50 in (38.1 mm)
Chain Information Number of Sprockets per ft of width per m of width 2 7 4 13
Chain Bottom to Centerline 0.36 in (9.1 mm)
Chain Height 0.72 in (18.2 mm)
Chain Pitch 2.25 in (57.2 mm)
Prefix
Chain Material
Standard Pin Material
WHT WLT
White High Temperature White Low Temperature
Polypropylene Polyethylene
BLT BSM DUV HS HT HUV LUV RHT WD
Blue Low Temperature Black Cut Resistant Plain Acetal Ultraviolet Resistant Heat Stabilized High Temperature High Temp. Ultraviolet Resistant Low Temp. Ultraviolet Resistant Red High Temperature White Plain Acetal
Polyethylene Polypropylene Polypropylene Polypropylene Polypropylene Polypropylene Polyethylene Polypropylene Polypropylene
Available Materials Temperature Fahrenheit max min min dry wet Standard Materials 40 220 212 4 -100 80 80 -73 Made-to-Order Materials -100 80 80 -73 -40 180 150 -40 0 180 150 -18 -40 220 212 -40 40 220 212 4 40 220 180 4 -40 80 80 -40 40 220 212 4 -40 180 150 -40
Regulatory Information The Food and Drug Administration (FDA) accepts certain materials for direct food contact. FDA approved material is compliant to FDA 21 CFR § 177.
Chain Strength lbs/ft
N/m
Approximate Weight lbs/ft2
Kg/m2
FDA Approval
104 27
100 27
2,400 35,016 1,600 23,344
1.70 1.80
8.30 8.79
Yes Yes
27 82 82 104 104 104 27 104 82
27 66 66 100 100 82 27 100 66
1,600 3,500 3,500 3,500 2,400 2,400 1,600 2,400 3,500
1.80 2.30 2.30 2.30 1.70 1.70 1.80 1.70 2.30
8.79 11.23 11.23 11.23 8.30 8.30 8.79 8.30 11.23
Yes Yes No No Yes No No Yes Yes
23,344 51,065 51,065 51,065 35,016 35,016 23,344 35,016 51,065
Additional Notes For chain width information see page MT - WIDTH - 1. Open area = 45.0%. Stainless steel pins are available on a made-to-order basis. Chain strength is listed at room temperature. NR = Not Recommended.
U.S. Patents: 5816390, 5573106
Rexnord® 5990 Series MatTop® Chain Product Portfolio
For additional material information, see material portfolio.
MT - 5990 - 5
Assembled-to-Width
Rexnord, MatTop and HP are trademarks of Rexnord Industries, LLC. All rights reserved.
Celsius max dry wet
Chain Drawing
Chain Width
DIRECTION OF TRAVEL
Chain Height 0.72 in (18.2 mm)
Photo shows 5998 MatTop® Chain molded in White Special Acetal Antimicrobial (WSA) material.
Chain Capacity 0% - 50% 50% - 100%
Chain Bottom to Centerline 0.36 in (9.1 mm)
Rexnord® 5998 MatTop® Chain with Microban® Antimicrobial Product Protection
5998
Min. Back-flex Radius 1.50 in (38.1 mm)
Chain Information Number of Sprockets per ft of width per m of width 2 7 4 13
Chain Pitch 2.25 in (57.2 mm)
Chain Material
Prefix
BHA BLA GLD GSA RLD THD WHA WLA WSA
Blue High Temperature Antimicrobial Blue Low Temperature Antimicrobial Grey Low Temp. Detectable Animicrobial Grey Special Acetal Antimicrobial Red Low Temp. Detectable Animicrobial Tan High Temp. Detectable Antimicrobial White High Temperature Antimicrobial White Low Temperature Antimicrobial White Special Acetal Antimicrobial
Standard Pin Material
Polypropylene Polyethylene Polyethylene Polypropylene Polyethylene Polypropylene Polypropylene Polyethylene Polypropylene
Available Materials Temperature Fahrenheit max min min dry wet Made-to-Order Materials 40 220 212 4 -100 80 80 -73 -100 80 80 -73 -40 180 150 -40 -100 80 80 -73 40 220 212 4 40 220 212 4 -100 80 80 -73 -40 180 150 -40
Chain Strength
Celsius max dry wet 104 27 27 82 27 104 104 27 82
100 27 27 66 27 100 100 27 66
Approximate Weight
lbs/ft
N/m
lbs/ft2
Kg/m2
2,400 1,600 1,600 3,500 1,600 2,400 2,400 1,600 3,500
35,016 23,344 23,344 51,065 23,344 35,016 35,016 23,344 51,065
1.70 1.80 1.80 2.30 1.80 1.70 1.70 1.80 2.30
8.30 8.79 8.79 11.23 8.79 8.30 8.30 8.79 11.23
FDA Approval
Yes Yes Yes Yes Yes Yes Yes Yes Yes
These materials will not protect the user against food-borne illness. Formulated to inhibit the growth of bacteria, mold and mildew that may cause discoloration, odor or degradation of the MatTop® chain. Always maintain good hygiene, proper cleaning procedures are still required. Microban is a registered trademark of Microban Products Company.
Assembled-to-Width
Regulatory Information * All components used in the formulation of Microban Antimicrobial material have federal regulatory approval for direct food contact. *** These materials meet the end-test requirements as specified by FDA 21CFR 177.1520 (c), the FDA requirement for polyolefin materials intended for direct food contact. All components of these materials are either compliant for food contact as listed by the FDA or regulated by the EPA. Rexnord, MatTop and HP are trademarks of Rexnord Industries, LLC. All rights reserved. U.S. Patents: 5816390, 5573106 MT - 5990 - 6
Additional Notes For chain width information see page MT - WIDTH - 1. Open area = 45.0%. Stainless steel pins are available on a made-to-order basis. The ability to detect plastic particles will vary due to sensitivity of individual metal detectors. All components may not be detectable. Chain strength is listed at room temperature. NR = Not Recommended. For additional material information, see material portfolio.
Rexnord® 5990 Series MatTop® Chain Product Portfolio
SS5996 Stainless Steel Sprocket
0.56 in (14.2 mm) Face Width
actual 9
effect 9
Pitch Diameter in mm 6.579 167.11
0.62 in (15.7 mm) Face Width
Outside Diameter in 6.46
mm 164.1
Length thru Bore 1.50 in (38.1 mm)
Bore Diameter Pitch Diameter Outside Diameter
Bore Diameter Pitch Diameter Outside Diameter
0.63 in (16.0 mm) Face Width
Length thru Bore 1.62 in (41.1 mm)
Number Of Teeth
N5996 Thermoplastic Sprocket
Length thru Bore 1.88 in* (47.6 mm)
5996 Semi-Steel Sprocket Information Bore Diameter (Shaft-Ready) Round Square in mm in mm min max min max min max min max 1 2 -
Bore Diameter (Round) in min 1
mm max 2
min -
max -
Bore Diameter Pitch Diameter Outside Diameter
5996 Semi-Steel Sprocket
Approximate Weight lbs 4.08
kg 1.85
Number Of Teeth actual 9 14
Pitch Diameter
effect in mm 9 6.579 167.11 14 10.111 256.82
SS5996 Stainless Steel Sprocket Information Bore Diameter (Shaft-Ready)
Outside Diameter in 6.46 9.98
Round
mm 164.1 253.5
in -
Number Pitch Outside of Teeth Diameter Diameter actual effect in mm in mm 7 7 5.186 131.72 4.94 125.5 9 9 6.579 167.11 6.46 164.1 14 14 10.111 256.82 10.10 256.5 17 17 12.245 311.02 12.36 313.9
Bore Diameter (Round)
Square mm -
in 2 1/2 2 1/2
mm -
in -
mm -
Approximate Weight lbs 4.82 7.50
kg 2.19 3.40
N5996 Thermoplastic Sprocket Imperial Information Imperial Bore Diameter Round in
Hex in 2 2 -
2 1/2 1 3/16 1 1/4 1 3/8 1 7/16 1 1/2 1 3/4 1 15/16 2 1/2 -
2 2 -
Square in
1 1/2 - 2 7/16 - 1 1/2 2 3/16 - 3 7/16 -
2 2 -
2 1/2 3 1/2 2 1/2 3 1/2 2 1/2 -
Approximate Weight lbs kg 0.49 0.22 0.88 0.40 1.60 0.73 1.71 0.78
Shaft-ready round bore sprockets are shipped with keyway and setscrew. *17T sprocket length through bore dimension is 2.25 in (57.2 mm).
N5996 Thermoplastic Sprocket Metric Information Number Pitch Outside of Teeth Diameter Diameter actual effect in mm in mm 7 7 5.186 131.72 4.94 125.5 9 9 6.579 167.11 6.46 164.1 14 14 10.111 256.82 10.10 256.5
Metric Bore Diameter Hex mm 50
Square mm 65
40 40 40
50 50
65 65
90
Approximate Weight lbs kg 0.49 0.22 0.88 0.40 1.60 0.73
Shaft-ready round bore sprockets are shipped with keyway and setscrew.
Rexnord® 5990 Series MatTop® Chain Product Portfolio
MT - 5990 - 7
Rexnord® 5990 Series MatTop® Chain Compatible Sprockets
Shaft-ready round bore sprockets are shipped with keyway and setscrew.
HS5996 Thermoplastic Sprocket 0.62 in (15.7 mm) Face Width
Length thru Bore 2.06 in (52.3 mm)
®® Rexnord ****** SeriesMatTop MatTop®®Chain ChainCompatible CompatilbleSprockets Sprockets Rexnord 5990 Series
actual 9 12 14
Pitch Diameter
Length thru Bore 1.88 in (47.6 mm)
Outside Diameter
effect in mm in 9 6.579 167.11 6.46 12 8.693 220.80 8.70 14 10.111 256.82 10.03
mm 164.1 221.0 254.8
min 1 1 1
0.62 in (15.7 mm) Face Width Bore Diameter Pitch Diameter Outside Diameter
Bore Diameter Pitch Diameter Outside Diameter
0.62 in (15.7 mm) Face Width
Number Of Teeth
PE5996 Thermoplastic Sprocket
Length thru Bore 1.88 in (47.6 mm)
NS5996 Thermoplastic Split Sprocket Information Bore Diameter (Shaft-Ready) Round Square in mm in mm max min max min max min max 2 3/4 25 70 1 3 1/2* 25 90* 2 3/4 25 70 1 3 1/2* 25 90* 4 1/2 25 120 1 4 1/2** 25 120**
Bore Diameter (Idler) in
Approximate Weight
mm
min 1 1 1
max 2 3/4 2 3/4 3 1/2
min 25 25 25
Bore Diameter Pitch Diameter Outside Diameter
NS5996 Thermoplastic Split Sprocket
max 70 70 90
lbs 1.68 1.98 2.12
kg 0.76 0.90 0.96
* The 3-1/2 in and 90 mm bores for the 9 and 12 tooth square bore sprockets are supplied as molded bores. All other bores are supplied with split bore adapters. ** The 3-1/2 in, 4-1/2 in, 90 mm and 120 mm bores for the14 tooth square bore sprockets are supplied as molded bores. All other bores are supplied with split bore adapters. Imperial shaft-ready round bore sprockets are shipped with keyway and setscrew. Metric shaft-ready round bore sprockets are shipped with keyway and no setscrew. Idler boards are designed to spin freely on the shaft. Similar bore sizes are available with the use of split plastic adapters.
Number of Teeth actual effect 9 9
Pitch Diameter in mm 6.579 167.11
Outside Diameter in mm 6.46 164.1
HS5996 Thermoplastic Sprocket Imperial Information Imperial Bore Diameter Square in 1 1/2 in 2 in
Approximate Weight in mm 0.88 0.40
3 1/2 in
Shaft-ready round bore sprockets are shipped with keyway and setscrew.
HS5996 Thermoplastic Sprocket Metric Information Metric Bore Diameter Square mm
Number Pitch Outside of Teeth Diameter Diameter actual effect in mm in mm 9 9 6.579 167.11 6.46 164.1 14 14 10.111 256.82 10.10 256.5
40 -
Approximate Weight in mm 0.88 0.40 1.60 0.73
90
Shaft-ready round bore sprockets are shipped with keyway and setscrew.
PE5996 Thermoplastic Sprocket Imperial Information Number of Teeth actual effect 7 7 9 9
Pitch Diameter in mm 5.186 131.72 6.579 167.11
Outside Diameter in mm 4.94 125.5 6.46 164.1
Imperial Bore Diameter
1 3/16
Round in 1 1/4
Square in 2 7/16
1 1/2 1 1/2
2
2 1/2
-
Approximate Weight lbs kg 0.38 0.17 0.69 0.31
Shaft-ready round bore sprockets are shipped with keyway and setscrew.
MT - 5990 - 8
Rexnord® 5990 Series MatTop® Chain Product Portfolio
Pusher Attachment (F-Style) All pusher attachments are molded 6 in (152.4 mm) wide and can be cut down to a minimum height of 1/4 in (6.35 mm). The F4 designation represents an F-style pusher attachment at a height of 4 in (101.6 mm).
Please indicate if pusher attachments are required every pitch, every second pitch, etc. when ordering. Also, indicate if indents are required in the center, on one or both sides of the chain. For example, “I would like F4 pusher attachments every 8th pitch indented 3/4 in on both sides of the chain.” For 5996 chain only.
Pusher Width 6.00 in (152.4 mm) Indenting Per Order Standard Pusher Height 4.00 in or 5.00 in (101.6 mm) or (127.0 mm)
Pusher Attachment (F-Style)
The F4 designation represents an F-style pusher attachment at a height of 4 in (101.6 mm).
Please indicate if pusher attachments are required every pitch, every second pitch, etc. when ordering. Also, indicate if indents are required in the center, on one or both sides of the chain. For example, “I would like F4 pusher attachments every 8th pitch indented 3/4 in on both sides of the chain.” For 5998 chain only.
Pusher Width 6.00 in (152.4 mm) Standard Pusher Height 4.00 in (101.6 mm)
Indenting Per Order
Sideguard Attachment Please indicate if sideguard attachments are required down one or both sides of the chain when ordering.
Please contact Rexnord Industries, Inc if any deviations from this standard are required. Direction of Travel
Attachment Width 5.00 in (127.0 mm)
Attachment Height 4.00 in (101.6 mm)
Attachment Offset 0.55 in (14.0 mm)
Sideguard attachments can be cut down to a minimum height of 1 in (25.4 mm).
If the chain is ordered with both sideguard and pusher attachments, the sideguard attachment will be furnished the same height as the pusher attachment.
Rexnord® 5990 Series MatTop® Chain Product Portfolio
MT - 5990 - 9
Rexnord® 5990 Series MatTop® Chain Accessories
All pusher attachments are molded 6 in (152.4 mm) wide and can be cut down to a minimum height of 1/4 in (6.35 mm).
Pusher Attachement (T1 - Style) All pusher attachments are molded 6 in (152.4 mm) wide. The T1 designation represents an T-style pusher atachement at a height of 1 in (25.4 mm). For 5995 chain only.
Please indicate if pusher attachments are required every second pitch, every fourth pitch, etc. When ordering. Standard indents are 3.00 in (76.2 mm) starting at 3.38 in (85.9 mm) placed on even pitch locations (ie. Every 2nd, 4th, 6th, etc). For example, “I would like an 18” width T1 pusher attachement every 8th ptich indented 12” on the right side of the chain.”
TYP Cleat 1.25 in (31.8 mm)
Attachment Height 1.00 in (25.4 mm)
Attachment Width 6.00 in (152.4 mm)
TYP Notch 0.75 in (19.0 mm) TYP Indent 0.38 in (9.5 mm)
Pusher Attachement (T2 - Style)
Rexnord® 5990 Series MatTop® Chain Accessories
All pusher attachmetns are molded 6 in (152.4 mm) wide. The T2 designation represents an T-style pusher atachement at a height of 2 in (50.8 mm). For 5995 chain only.
TYP Cleat 1.50 in (38.1 mm)
Please indicate if pusher attachments are required every second pitch, every fourth pitch, etc. When ordering. Standard indents are 3.00 in (76.2 mm) starting at 3.75 in (95.3 mm) placed on even pitch locations (ie. Every 2nd, 4th, 6th, etc). For example, “I would like an 18” width T2 pusher attachement every 8th ptich indented 12” on the right side of the chain.”
Attachment Height 2.00 in (50.8 mm) TYP Notch 1.50 in (38.1 mm) Attachment Width 6.00 in (152.4 mm) TYP Indent 0.75 in (19.0 mm)
MT - 5990 - 10
Rexnord® 5990 Series MatTop® Chain Product Portfolio
4707/5997 Transfer Comb Kit
Center to Center of Slots
Plate Thickness 0.25 in (6.4 mm)
Plate Length
Slot Width
Top of Teeth to Plate Edge
Centerline of Slot to Plate Edge
Plate Width 5.92 in (150.4 mm)
The 114-222-1 transfer comb is molded in white acetal. The 114-683-1 and 114-1010-1 tranfer combs are molded in a proprietary black internally lubricated high temerature material. Transfer comb kits are supplied with 1/4 x 20 screws and slot caps.
Transfer Comb Kit Number 614-72-1 614-73-1 614-74-1
Transfer Plate Screw Part Slot Caps Part Number Number Part Number 114-222-1 114-683-1 114-1010-1
114-870-1 114-870-1 114-870-1
114-869-2 114-1009-2 114-1009-2
Plate Length in 5.75 8.50 7.50
Centerline of Slot to Plate Edge
Slot Width
mm 146.1 215.9 190.5
in 0.75 1.50 1.50
mm 19.1 38.1 38.1
in 1.00 2.00 1.00
mm 25.4 50.8 25.4
Top of Teeth to Plate Edge in 2.24 3.50 2.50
Center to Center of Slots
mm 56.9 88.9 63.5
in 4.00 3.25 3.25
mm 101.6 82.6 82.6
Approximate Weight lbs 0.24 0.28 0.30
kg 0.11 0.13 0.14
Mounting Plate Thickness 0.25 in (6.4 mm)
Top of Plate to Rib Bottom 0.60 in (15.2 mm)
Plate Length
¼' Diameter Bolt
Plate Edge to Rib Edge 2.33 in (59.2 mm)
Plate Edge to Notch Edge 1.46 in (37.1 mm)
Centerline of Slot to Plate Edge 1.00 in (25.4 mm)
Slot Width 1.50 in (38.1 mm)
Plate Width 5.94 in (150.6 mm) Center to Center of Slots 3.25 in (82.6 mm)
Top of Teeth to Plate Edge 4.40 in (111.8 mm)
4707/5997/Fortex Heavy) Duty Transfer Comb Kit
Plate Thickness 0.50 in (12.7 mm)
Transfer combs are molded in a proprietary black internally lubricated high temperature material. Tranfer comb kits are supplied with 1/4 x 20 screws and slot caps. For 5997, 4707 and 9200 chains only. The 114-3275-1 transfer comb has the bottom rib removed. Transfer Comb Kit Number 614-266-1 614-267-1 614-268-1
Transfer Plate Screw Part Slot Caps Part Number Number Part Number 114-5346-1 114-5347-1 114-3275-1
114-870-1 114-870-1 114-870-1
114-1009-2 114-1009-2 114-1009-2
Plate Length in 6.18 7.95 7.95
Rexnord® 5990 Series MatTop® Chain Product Portfolio
mm 157.0 201.9 201.9
Slot Width in 1.50 1.50 1.50
mm 38.1 38.1 38.1
Centerline of Slot Top of Teeth to to Plate Edge Plate Edge in 1.00 1.00 1.00
mm 25.4 25.4 25.4
in 4.40 4.40 4.40
mm 111.8 111.8 111.8
Center to Center of Slots in 3.25 3.25 3.25
mm 82.6 82.6 82.6
Approximate Weight lbs 0.48 0.53 0.53
kg 0.22 0.24 0.24
MT - 5990 - 11
Rexnord® 5990 Series MatTop® Chain Accessories
For 5997 and 4707 chans only.
5997/Fortrex Retrofit Transfer Comb Kit Plate Width 5.91 in (150.0 mm) Center to Center of Slots 3.00 in (76.2 mm)
Plate Length
Slot Width 1.50 in (38.1 mm)
Top of Teeth to Plate Edge 7.00 in (177.8 mm)
Center to Center of Slots 2 2.25 in (57.2 mm) Centerline of Slot to Plate Edge 5.38 in (136.6 mm)
Plate Thickness 0.31 in (7.9 mm)
Rexnord® 5990 Series MatTop® Chain Accessories
¼' Diameter Bolt
Transfer combs are molded in a proprietary black internally lubricated high temperature material. The 614-726-1 and 614-727-1 transfer comb kits are supplied with 1/4 x 20 screws and slot caps. The 614-726-2 and 614-727-2 transfer comb kits are supplied with M6 x 1 screws and slot caps. For 5997 and 9200 chains only. Transfer Comb Kit Number
Transfer Plate Screw Part Slot Caps Part Number Number Part Number
614-726-1 614-726-2 614-727-1 614-727-2
114-5200-1 114-870-1 114-1009-2 114-5200-1 I0000683291 114-1009-2 114-5201-1 114-870-1 114-1009-2 114-5201-1 I0000683291 114-1009-2
MT - 5990 - 12
Plate Length in 11.00 11.00 9.75 9.75
mm 38.1 38.1 247.7 247.7
Slot Width in 1.50 1.50 1.50 1.50
mm 38.1 38.1 38.1 38.1
Distance From Distance From Distance Between Centerline of Slot Top of Teeth to Center to Center to Plate Edge Plate Edge of Slots in 5.38 5.38 5.38 5.38
mm 136.7 136.7 136.7 136.7
in 7.00 7.00 7.00 7.00
mm 177.8 177.8 177.8 177.8
in 3.00 3.00 3.00 3.00
mm 76.2 76.2 76.2 76.2
Approximate Weight lbs 0.31 0.31 0.28 0.28
kg 0.14 0.14 0.13 0.13
Rexnord® 5990 Series MatTop® Chain Product Portfolio
DTS®-C Transfer Comb Kit
Plate Length 9.01 in (228.9 mm)
Plate Height 1.83 in (46.5 mm)
Slot Width 1.69 in (42.9 mm)
Mounting Plate Thickness 0.25 in (6.4 mm)
Rexnord® 5990 Series MatTop® Chain Accessories
Plate Width 5.96 in (151.4 mm)
Center to Center of Slots 3.00 in (76.2 mm)
DTS®-C Transfer Plate 114-4151-1 Wearstrip 114-4160-1
Steel Mounting Plate
Wearstrip Dimensions
0.20 in (5.1 mm)
(Not Supplied By Rexnord)
0.18 in (4.6 mm) 2.25 in (57.2 mm)
Cap Screws 114-870-1 (¼-20 Thread)
DTS-C Component Part Numbers Wearstrip Component Kit Comb Screw Part Number Raised Rib Description Part Number Part Number Part Number Chain (10 ft length) 4707, 5997, DTS-C 614448-1 114-4151-1 114-870-1 NA Comb Kit 9217, 9227, Wearstrip NA 114-4160-1 or 9237
For Use With: DTS Chain
Takeaway Chain
7705DTS-450
7705, 7706 or 1055
Each kit includes one comb and two mounting screws. Wearstrip is sold in 10 ft (3.048 m) lengths and is sold separately.
Rexnord® 5990 Series MatTop® Chain Product Portfolio
MT - 5990 - 13
