600KW RESISTIVE POWER PROVING LOAD ... - Generator Power
www.vikingpowersystems.com
600KW RESISTIVE POWER PROVING LOAD BANK
IP65 STAINLESS STEEL LOAD RESISTORS CIRCUIT BREAKERS ON EACH LOAD GROUP CONTACTOR SWITCHING IN 5KW STEPS LOW-WATTS DENSITY LOAD RESISTORS OVER TEMPERATURE & FAN FAIL PROTECTION IP55 FAN MOTOR & ALUMINIUM COOLING FAN INSULATED RESISTOR COMPARTMENT 2MM ZINC COATED STEEL BODY STAINLESS STEEL GRILLE AND FASTENERS
SPECIFICATIONS DIMENSIONS Standard : H:1965mm W:1425mm D:1225mm Fork lift frame (pictured): H:2225mm W:1600mm D:1400mm UNIT WEIGHT Standard : 715 KG, with forklift base:1080 KG STANDARD RATING: 600KW @ 400 volt AC +/- 10% , 50Hz, 3 wire (Other voltages and Hz ratings available) LOAD STEPS: 1 x 5KW, 1 x 10KW, 1 x 20KW, 5 x 40KW, 3 x 80KW & 1 x 120KW switching in 5KW load increments. DIGITAL METERING: Backlit LCD power meter. Volts, Amps KW, KVA, KWH, PF with RS-485 Mod-Bus communication RESISTOR WIRING: 200 degree ’C’ rated silicone insulated LOAD CABLE CONNECTIONS: 50 x 10mm Copper busbar with 2 x M12 bolted connections per phase FAN MOTOR: 7.5KW, 400 VOLT +/- 10%, 50Hz ,4 pole TEFC, IP55. DOL start with thermal overload FINISH: Grey/black UV stabilised Powder Coat with stainless steel inlet and discharge grilles and fasteners ENCLOSURE: IP54 (control panel door closed) IP44 (control panel door open) SOUND LEVEL: 88 dba @ 2 metres OPTIONAL EQUIPMENT FORK LIFT FRAME: 50 x 50 x 4.5mm electro-zinc plated & powder coated hollow box section roll frame with 4 point top lift and heavy duty hot dip galvanised forklift base (pictured above) AUXILLARY POWER: External power supply for control/fan: 32 amp , 3 phase, 4 pin power inlet socket with panel mounted changeover switch FAN REVERSE : Fan motor reversing switch to change air flow direction when supply phase rotation is incorrect POWERLOCK: Powerlock twist type shielded connectors for incoming power supply (400 amp rated ) CABLE HANGERS: Folding hanger brackets (2) for flexible cable storage (picured above)
VIKING POWER SYSTEMS Co. Ltd 242/44 Moo 3 T. Phala A. Ban Chang Rayong 21130 THAILAND Ph: +66 (0)84 3258889 Fax: +66 (0) 38 602244 E-mail: [email protected] Copyright 2013 Viking Power Systems Co. Ltd
600KW RESISTIVE POWER PROVING LOAD BANK
CONTROL OPTIONS STANDARD PLC TOUCH SCREEN
Integrated 7” colour touch screen / PLC controller Twin KW display shows both KW pre-selected and KW on-line Synchronised cooling fan start when load is connected Auto Cool down timer (300 second) with digital display Load step selection (5KW, 10KW, 20KW & 40KW) Automatic selection of resistor steps for load selected Displayed fault and status indication on main screen
Emergency Stop (status) High Temperature (status / fault) Load Bank (on-line / off-line Cooling fan Air Flow (status / fault) Cool down Timer (timing status)
Plain English help and diagnostic screens Isolation transformer (400/220V) and 24 volt DC regulated power
supply for safe and stable control system power MANUAL SWITCHED CONTROLS (OPTIONAL)
Industrial quality rotary switches with 10 amp contacts for all control functions and LED indicator lamps Cooling fan switch (Off - Cool Down - On) with interlock to prevent load application without cooling fan running Fault indicator lamp (LED) for fan failure and high temperature Load switches (Off - On) for each load group Load steps 5KW, 10KW & 20KW that can be combined to give increasing or decreasing load in 5KW steps Isolation transformer (400/220 volt) for power supply to all load bank controls and switches
AUSTRALIAN DISTRIBUTOR GENERATOR POWER PTY LTD 6 - 8 EXCELLER AVENUE BANKSTOWN NSW 2200 PH: 02 9790 6800 FAX: 02 9790 6400 : www.generatorpower.com.au
VIKING POWER SYSTEMS Co. Ltd Due to on-going product development these specifications are subject to changes or modification
600KW RESISTIVE POWER PROVING LOAD BANK
IP65 STAINLESS STEEL LOAD RESISTORS CIRCUIT BREAKERS ON EACH LOAD GROUP CONTACTOR SWITCHING IN 5KW STEPS LOW-WATTS DENSITY LOAD RESISTORS OVER TEMPERATURE & FAN FAIL PROTECTION IP55 FAN MOTOR & ALUMINIUM COOLING FAN INSULATED RESISTOR COMPARTMENT 2MM ZINC COATED STEEL BODY STAINLESS STEEL GRILLE AND FASTENERS
SPECIFICATIONS DIMENSIONS Standard : H:1965mm W:1425mm D:1225mm Fork lift frame (pictured): H:2225mm W:1600mm D:1400mm UNIT WEIGHT Standard : 715 KG, with forklift base:1080 KG STANDARD RATING: 600KW @ 400 volt AC +/- 10% , 50Hz, 3 wire (Other voltages and Hz ratings available) LOAD STEPS: 1 x 5KW, 1 x 10KW, 1 x 20KW, 5 x 40KW, 3 x 80KW & 1 x 120KW switching in 5KW load increments. DIGITAL METERING: Backlit LCD power meter. Volts, Amps KW, KVA, KWH, PF with RS-485 Mod-Bus communication RESISTOR WIRING: 200 degree ’C’ rated silicone insulated LOAD CABLE CONNECTIONS: 50 x 10mm Copper busbar with 2 x M12 bolted connections per phase FAN MOTOR: 7.5KW, 400 VOLT +/- 10%, 50Hz ,4 pole TEFC, IP55. DOL start with thermal overload FINISH: Grey/black UV stabilised Powder Coat with stainless steel inlet and discharge grilles and fasteners ENCLOSURE: IP54 (control panel door closed) IP44 (control panel door open) SOUND LEVEL: 88 dba @ 2 metres OPTIONAL EQUIPMENT FORK LIFT FRAME: 50 x 50 x 4.5mm electro-zinc plated & powder coated hollow box section roll frame with 4 point top lift and heavy duty hot dip galvanised forklift base (pictured above) AUXILLARY POWER: External power supply for control/fan: 32 amp , 3 phase, 4 pin power inlet socket with panel mounted changeover switch FAN REVERSE : Fan motor reversing switch to change air flow direction when supply phase rotation is incorrect POWERLOCK: Powerlock twist type shielded connectors for incoming power supply (400 amp rated ) CABLE HANGERS: Folding hanger brackets (2) for flexible cable storage (picured above)
VIKING POWER SYSTEMS Co. Ltd 242/44 Moo 3 T. Phala A. Ban Chang Rayong 21130 THAILAND Ph: +66 (0)84 3258889 Fax: +66 (0) 38 602244 E-mail: [email protected] Copyright 2013 Viking Power Systems Co. Ltd
600KW RESISTIVE POWER PROVING LOAD BANK
CONTROL OPTIONS STANDARD PLC TOUCH SCREEN
Integrated 7” colour touch screen / PLC controller Twin KW display shows both KW pre-selected and KW on-line Synchronised cooling fan start when load is connected Auto Cool down timer (300 second) with digital display Load step selection (5KW, 10KW, 20KW & 40KW) Automatic selection of resistor steps for load selected Displayed fault and status indication on main screen
Emergency Stop (status) High Temperature (status / fault) Load Bank (on-line / off-line Cooling fan Air Flow (status / fault) Cool down Timer (timing status)
Plain English help and diagnostic screens Isolation transformer (400/220V) and 24 volt DC regulated power
supply for safe and stable control system power MANUAL SWITCHED CONTROLS (OPTIONAL)
Industrial quality rotary switches with 10 amp contacts for all control functions and LED indicator lamps Cooling fan switch (Off - Cool Down - On) with interlock to prevent load application without cooling fan running Fault indicator lamp (LED) for fan failure and high temperature Load switches (Off - On) for each load group Load steps 5KW, 10KW & 20KW that can be combined to give increasing or decreasing load in 5KW steps Isolation transformer (400/220 volt) for power supply to all load bank controls and switches
AUSTRALIAN DISTRIBUTOR GENERATOR POWER PTY LTD 6 - 8 EXCELLER AVENUE BANKSTOWN NSW 2200 PH: 02 9790 6800 FAX: 02 9790 6400 : www.generatorpower.com.au
VIKING POWER SYSTEMS Co. Ltd Due to on-going product development these specifications are subject to changes or modification
