Splash Proof Fan
60
9WL type
■ Features
Splash Proof and Dust Resistant
IP68*1 protection rating water and dust resistance.
Longest-Lasting Lifespan
These fans have an expected lifespan of 180,000 hours (approximately 20 years), about 3 times that of our conventional splash proof fan,*2 making them ideal for equipment that must operate without maintenance for extended periods.
High Air Flow and High Static Pressure
Maximum air flow increased by approximately 1.7 times and maximum static pressure increased by approximately 3.4 times compared with our conventional splash proof fan.*3
Low Power Consumption
The power consumption is approximately 19% lower than that of our conventional splash proof fan.*4 *1: Based on testing procedure for IEC (International Electrotechnical Commission) specification IEC 60529. *2: Specification of Model No. 9WL0612P4S001. Our conventional splash proof fan is 60 x 60 x 25 mm “San Ace 60W”, Model No. 9WP0612D401. *3: Specification of Model No. 9WL0612P4S001. Our conventional splash proof fan is 60 x 60 x 25 mm “San Ace 60W”, Model No. 9WP0612G401. *4: Specification of Model No. 9WL0612P4H001. At equivalent air flow performance. Our conventional splash proof fan is 60 x 60 x 25 mm “San Ace 60W”, Model No. 9WP0612G401.
60×60×25mm
■ Specifications
The following nos. have PWM controls, pulse sensors. Model No.
Rated Voltage [V]
Operating Voltage Range [V]
9WL0612P4S001
9WL0612P4J001
12
10.8 to 13.2
9WL0612P4H001
9WL0624P4S001
9WL0624P4J001
24
21.6 to 26.4
9WL0624P4H001
Operating PWM Max. Air Flow MAX. Static Pressure SPL Temperature Duty Cycle Rated Current Rated Input Rated Speed -1 3 [A] [W] [min ] [m /min] [CFM] [Pa] [inchH 2 O] [dB(A)] (Note1, 2) [℃ ] [%] 100
0.67
8.04
11,000
1.40
49.4
20
0.06
0.72
2,900
0.36
12.7
100
0.39
4.68
8,650
1.10
38.8
20
0.03
0.36
1,150
0.13
4.8
100
0.17
2.04
6,150
0.78
27.5
20
0.03
0.36
1,350
0.17
6.0
100
0.34
8.16
11,000
1.40
49.4
20
0.03
0.72
2,900
0.36
12.7
100
0.19
4.56
8,650
1.10
38.8
20
0.02
0.48
2,200
0.28
9.8
100
0.08
1.92
6,150
0.78
27.5
20
0.02
0.48
1,300
0.16
5.6
300
1.204
53
0.083
20
0.730
47
0.013
14
0.389
36
0.018
14
1.204
53
0.083
20
0.730
47
12.0
0.048
17
97
0.389
36
0.017
14
20.8 182 3.3 97 4.7 300 20.8 182
4.3
－20 to ＋70
Expected Life [h]
180,000
Note1: PWM Frequency: 25 kHz Note2: Fans do not rotate when PWM duty cycle is 0%.
Available options: Without Sensor
Pulse Sensor
Please inquire as the availability of these functions depends on the model:
Lock Sensor
■ Common Specifications □ Material ･･････････････････････････ Frame: Aluminum (Black coating), Impeller: Plastics (Flammability: UL94V-1) □ Expected Life ･････････････････････ Refer to specifications (L10: Survival rate: 90% at 60 ℃, rated voltage, and continuously run in a free air state) □ Motor Protection System ･･････････ Current blocking function and reverse polarity protection □ Dielectric Strength ････････････････ 50 / 60 Hz, 500 VAC, 1 minute (between lead conductor and frame) □ Sound Pressure Level (SPL) ････････ Expressed as the value at 1 m from air inlet side □ Operating Temperature ････････････ Refer to specifications (Non-condensing) □ Storage Temperature ･･････････････ －30 ℃ to ＋70 ℃ (Non-condensing) ーBlack Sensor: Yellow Control: Brown □ Lead Wire ････････････････････････ ＋Red ○ □ Mass ･････････････････････････････ Approx. 120 g
60
9WL type
■ Air Flow - Static Pressure Characteristics ・ PWM Duty Cycle (Pa)
1.6
400
1.4
350
1.2
300
1.0
250
0.8
200
0.6
150
0.4
100
0.2
50
0
・ Operating Voltage Range (inch H2O)
DC 12 V / DC 24 V
PWM Duty Cycle 100%
→ Static pressure
→ Static pressure
(inch H2O)
50%
20%
0
10
20
30
40
→ Air flow
50
400
1.4
350
1.2
300
1.0
250
0.8
200
0.6
150
0.4
100
0.2
50
0
0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 (m3 /min) 0
(Pa)
1.6
PWM Duty Cycle 100%
13.2 V / 26.4 V 12 V /24 V 10.8 V / 21.6 V
0
0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 (m3 /min) 0
(CFM)
9WL0612P4S001 9WL0624P4S001
10
20
30
40
50
→ Air flow
(CFM)
9WL0612P4S001 9WL0624P4S001
・ PWM Duty Cycle 300
1.0
250
0.8
200
0.6
150
0.4
100
0.2
50
0
DC 12 V
(Pa)
1.2
300
PWM Duty Cycle 100%
1.0
250
50%
0.6
150
0.4
100
0.2
50
0
0.2 0.4 0.6 0.8 1.0 1.2 1.4 (m3 /min) 0
200
10
20
30
40
PWM Duty Cycle 100%
50%
→ Air flow
0
10
20
30
→ Air flow
40
100
0.3
75
0.2
50
0.1
25
0
PWM Duty Cycle 100%
50% 20%
0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 (m3 /min) 0
0.8
200
0.6
150
0.4
100
0.2
50
PWM Duty Cycle 100%
13.2 V / 26.4 V 12 V / 24 V 10.8 V / 21.6 V
0
0.2 0.4 0.6 0.8 1.0 1.2 1.4 (m3 /min)
0 0
10
20
30
40
→ Air flow
50 (CFM)
9WL0612P4J001 9WL0624P4J001 ・ Operating Voltage Range
(inch H2O)
DC 12 V
0
250
5 10 15 20 25 30 35
→ Air flow
9WL0612P4H001
(CFM)
(Pa)
0.5
125
0.4
100
0.3
75
0.2
50
0.1
25
0
(inch H2O)
DC 24 V
PWM Duty Cycle 100%
→ Static pressure
0.4
1.0
9WL0624P4J001
→ Static pressure
→ Static pressure
(Pa)
125
300
50 (CFM)
・ PWM Duty Cycle 0.5
(Pa)
1.2
0.2 0.4 0.6 0.8 1.0 1.2 1.4 (m3 /min)
0
50 (CFM)
9WL0612P4J001
(inch H2O)
(inch H2O)
20%
20%
0
0.8
DC 24 V
→ Static pressure
1.2
・ Operating Voltage Range (inch H2O)
→ Static pressure
(Pa)
→ Static pressure
(inch H2O)
50% 20%
0
0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 (m3 /min) 0
5
10 15 20 25 30 35
→ Air flow
9WL0624P4H001
(CFM)
(Pa)
0.5
125
0.4
100
0.3
75
0.2
50
0.1
25
0
PWM Duty Cycle 100%
13.2 V / 26.4 V 12 V / 24 V 10.8 V / 21.6 V
0
0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 (m3 /min) 0
5 10 15 20 25 30 35 (CFM)
→ Air flow
9WL0612P4H001 9WL0624P4H001
60×60×25mm
Voltage: DC 12 V PWM Frequency: 25 kHz
10,000
11,000 min-1
6,000 5,000 4,000 3,000 2,000 1,000
Voltage: DC 12 V PWM Frequency: 25 kHz
9,000
8,650 min-1
8,000 7,000 6,000 5,000 4,000 3,000
11,000 min
0
9WL0612P4J001
9WL0612P4H001
Voltage: DC 24 V PWM Frequency: 25 kHz
7,000
8,650 min-1
8,000 7,000 6,000 5,000 4,000 3,000
100
6,150 min-1
5,000 4,000 3,000 2,000 1,000
1,000 0
PWM Duty Cycle (%)
Voltage: DC 24 V PWM Frequency: 25 kHz
6,000
2,000
0
100
PWM Duty Cycle (%)
Speed (min-1)
6,000 5,000 4,000 3,000 2,000 1,000
3,000
100
9,000
Speed (min-1)
Speed (min-1)
10,000 -1
4,000
PWM Duty Cycle (%)
9WL0612P4S001 Voltage: DC 24 V PWM Frequency: 25 kHz
5,000
1,000
0
100
6,150 min-1
2,000
1,000
PWM Duty Cycle (%)
Voltage: DC 12 V PWM Frequency: 25 kHz
6,000
2,000
0
12,000 11,000 10,000 9,000 8,000 7,000
7,000
Speed (min-1)
12,000 11,000 10,000 9,000 8,000 7,000
Speed (min-1)
Speed (min-1)
■ PWM Duty - Speed Characteristics Example
100
0
100
PWM Duty Cycle (%)
PWM Duty Cycle (%)
9WL0624P4J001
9WL0624P4H001
9WL0624P4S001
■ PWM Input Signal Example Input Signal Waveform
VIH=4.75 V to 5.25 V VIL=0 V to 0.4 V
VIH
T1 T ×100 1 PWM Frequency 25 (kHz) = T Source Current (Isource) : 1 mA Max. at control voltage 0 V PWM Duty Cycle (%) =
VIL
Sink Current (Isink) : 1 mA Max. at control voltage 5.25 V
T1
Control Terminal Voltage: 5.25 V Max. (Open Circuit)
When the control lead wire is open, the fan speed is the same as the one at a PWM duty cycle of 100%.
T
Either TTL input, open collector or open drain can be used for PWM control input signal.
■ Example of Connection Schematic Inside of DC fan
DC fan input voltage
Control PWM Input Signal
Isource Isink
■ Specifications for Pulse Sensors Output circuit: Open collector
Rated Voltage 12 V Fan VCE＝＋13.8 V MAX. Ic＝5 mA MAX. [VOL＝VCE (SAT) ＝0.6 V MAX.]
Inside of DC fan
Rated Voltage 24 V Fan Model No.: 9WL0624P4S001 VCE＝＋30 V MAX. Ic＝10 mA MAX. [VOL＝VCE (SAT) ＝0.6 V MAX.]
＋ ○
Sensor
Pull-up resistor Pull-up voltage
IC
Rated Voltage 24 V Fan Model No.: 9WL0624P4J001, 9WL0624P4H001 VCE＝＋27.6 V MAX. Ic＝5 mA MAX. [VOL＝VCE (SAT) ＝0.8 V MAX.]
Sensor output
－ ○
(VCE)
Output Waveform (Need pull-up resistor) In case of steady running
T1～4≒ (1/4) T0
(One revolution)
T1～4≒ (1/4) T0＝60/4N (sec)
T0 T1
T2
N＝Fan speed (min-1) T3
T4
VOH VOL 0V
■ Dimensions (unit : mm) 8-φ4.3±0.3 Mounting Hole
+50 0
50±0.3
60±0.5
300
(10)
Lead Wire AWG26 UL1430
50±0.3 60±0.5
Rotating Direction
4±0.3
4±0.3 25±0.5
Air Flow Direction
■ Reference Dimension of Mounting Holes and Vent Opening (unit : mm) Inlet Side, Outlet Side 59 50±0.3 29.7
59
29.7
50±0.3
62
.7
4-φ4.5
●The products shown in this catalog are subject to Japanese Export Control Law. Diversion contrary to the law of exporting country is prohibited. ●To protect against electrolytic corrosion that may occur in locations with strong electromagnetic noise, we provide fans that are unaffected by electrolytic corrosion. 3-33-1, Minami-Otsuka, Toshima-ku, Tokyo, 170-8451, Japan TEL: +81 3 5927 1020
http://www.sanyodenki.com
The names of companies and/or their products specified in this catalog are the trade names, and/or trademarks and/or registered trademarks of such respective companies. “San Ace” is a trademark of SANYO DENKI CO.,LTD. CATALOG No. C1034B001 ‘14.2 Specifications are subject to change without notice.