63506D Garage-Cadet.qxp:63506D Garage-Cadet
63506D Garage-Cadet.qxp:63506D Garage-Cadet
4/22/09
3:22 PM
Page 1
GARAGE STORAGE & ORGANIZATION
GARAGE STORAGE & ORGANIZATION
FEATURES
FULLY WELDED CONSTRUCTION
• Versatile garage storage components allow you to pick and choose the items that meet your storage needs. As your needs change or grow it is easy to add components to increase organization needs. • All steel construction can stand up to daily use.
FULLY WELDED CONSTRUCTION
• Gloss black and silver tread plate baked epoxy paint finish resists solvents and moisture. • Units are fully lockable to keep tools, chemicals and other supplies in place and out of the reach of small children.
ALL CABINETS ARE FULLY LOCKABLE
LARGE CAPACITY FLOOR CABINET BAKED EPOXY POWDER PAINT FINISH CADET-SET – 6 PIECE GARAGE STORAGE SYSTEM Includes the following items: 2 - CADET-1250 Wall Cabinets, 1 - CADET-1600 2 door project center, 1 - CADET-1605 5 drawer project center, 1 - CADET-6624 workbench and 1 - CADET-7203 locker. Set is shipped on an individual skid and can be drop shipped.
ALL STEEL CONSTRUCTION
ADJUSTABLE FLOOR LEVELERS
P.O. Box 489, 1360 N. Old Rand Road, Wauconda, IL 60084 USA Phone: 847-526-1611, Fax: 847-526-6599, 1-800-323-9601, www.stack-on.com NOTE: The tools and supplies shown are for illustration purposes only and are not included with our tool storage products. Dimensions: Height-top to bottom; Width-left to right; Depth-front to back. All specifications subject to change without notice. 042009-500
® Registered trademark/ TM Trademark of Whirlpool U.S.A. © 2009. All Rights Reserved. Manufactured under license by Stack-On Products Co. Wauconda, IL.
63506D Garage-Cadet.qxp:63506D Garage-Cadet
4/22/09
3:26 PM
Page 2
GARAGE STORAGE & ORGANIZATION
GARAGE STORAGE & ORGANIZATION
GARAGE STORAGE & ORGANIZATION
FULLY WELDED CONSTRUCTION
FULLY WELDED CONSTRUCTION
FULLY WELDED CONSTRUCTION
CADET-1600 – 2-DOOR PROJECT CENTER CADET-7203
CADET 7203– 2-DOOR STORAGE CABINET • Extra large capacity storage cabinet has 72-inches of vertical storage – making the most of its 36-inch width and 18-inch depth. More storage than many other floor cabinets. • Full length steel doors open up to 180 degrees. • Cabinet is fully lockable with key coded cylinder lock. • All steel construction. • Includes 2 adjustable steel shelves that can be adjusted in four-inch increments and a fixed steel shelf. • Includes adjustable leveling feet. Overall 36" W x 18" D x 72" H 91cm x 46cm x 183cm (without levelers)
CADET-1250 • Includes 2 adjustable steel shelves that can be adjusted in two-inch increments. • Steel pegboard side panels allow for hanging storage which is ideal for electrical cords, trouble lights, levels and more. • A finished, 1/2-inch thick medium density fiber board work top is included. • 4" x 1.75" swivel casters (2 with toe locks) make it easy to maneuver this cabinet in all directions. Glide down a narrow passage way between parked cars or be guided under the CADET Workbench for storage. • Cabinet is fully lockable with 2 point locking bar and key coded cylinder lock for added security. Overall 26-1/2" W x 16" D x 34-3/8" H (with casters) 67cm x 40,6cm x 87cm
CADET-1250– 2-DOOR WALL CABINET • Cabinet is fully lockable with 2 point locking bar and key coded cylinder lock for added security. • Includes 2 adjustable steel shelves that can be adjusted in two-inch increments. • Steel pegboard side panels allow for hanging storage which is ideal for electrical cords, trouble lights, levels and more. Overall 26-1/2" W x 12-1/4" D x 29" H 67cm x 31cm x 74cm
CADET-1600
CADET-6624
CADET-6624 – WORKBENCH • All steel frame construction can stand up to daily use. • 1-1/4-inch thick treated medium density fiber board work surface provides a large, convenient work area. • Work surface includes a finished front edge. • Full width steel support beam on the back of the workbench provides greater strength and rigidity. Also acts as back stop for project centers. • “Positive-Fit” construction provides easy, quick assembly. All fastening hardware is included. • Includes adjustable leveling feet. Overall 66" W x 24" D x 39" H (with levelers) 168cm x 61cm x 99cm
CADET-1605 – 5-DRAWER PROJECT CENTER CADET-1605
• Includes 5 full extension steel drawers that glide on steel compound drawer slides. Steel inner walls provide added strength and durability. • A finished, 1/2-inch thick medium density fiber board work top is included. • 4" x 1.75" swivel casters (2 with toe locks) make it easy to maneuver this cabinet in all directions. Glide down a narrow passage way between parked cars or be guided under the CADET Workbench for storage. • Cabinet is fully lockable with steel bar lock and key coded cylinder lock for added security. Overall 26-1/2" W x 16" D x 34-3/8" H (with casters) 67cm x 40,6cm x 87cm 3 Drawers 21-3/8" W x 15" D x 4" H, 54cm x 38,1cm x 10cm 2 Drawers 21-3/8" W x 15" D x 6" H, 54cm x 38,1cm x 15cm
63506D Garage-Cadet.qxp:63506D Garage-Cadet
4/22/09
3:26 PM
Page 2
GARAGE STORAGE & ORGANIZATION
GARAGE STORAGE & ORGANIZATION
GARAGE STORAGE & ORGANIZATION
FULLY WELDED CONSTRUCTION
FULLY WELDED CONSTRUCTION
FULLY WELDED CONSTRUCTION
CADET-1600 – 2-DOOR PROJECT CENTER CADET-7203
CADET 7203– 2-DOOR STORAGE CABINET • Extra large capacity storage cabinet has 72-inches of vertical storage – making the most of its 36-inch width and 18-inch depth. More storage than many other floor cabinets. • Full length steel doors open up to 180 degrees. • Cabinet is fully lockable with key coded cylinder lock. • All steel construction. • Includes 2 adjustable steel shelves that can be adjusted in four-inch increments and a fixed steel shelf. • Includes adjustable leveling feet. Overall 36" W x 18" D x 72" H 91cm x 46cm x 183cm (without levelers)
CADET-1250 • Includes 2 adjustable steel shelves that can be adjusted in two-inch increments. • Steel pegboard side panels allow for hanging storage which is ideal for electrical cords, trouble lights, levels and more. • A finished, 1/2-inch thick medium density fiber board work top is included. • 4" x 1.75" swivel casters (2 with toe locks) make it easy to maneuver this cabinet in all directions. Glide down a narrow passage way between parked cars or be guided under the CADET Workbench for storage. • Cabinet is fully lockable with 2 point locking bar and key coded cylinder lock for added security. Overall 26-1/2" W x 16" D x 34-3/8" H (with casters) 67cm x 40,6cm x 87cm
CADET-1250– 2-DOOR WALL CABINET • Cabinet is fully lockable with 2 point locking bar and key coded cylinder lock for added security. • Includes 2 adjustable steel shelves that can be adjusted in two-inch increments. • Steel pegboard side panels allow for hanging storage which is ideal for electrical cords, trouble lights, levels and more. Overall 26-1/2" W x 12-1/4" D x 29" H 67cm x 31cm x 74cm
CADET-1600
CADET-6624
CADET-6624 – WORKBENCH • All steel frame construction can stand up to daily use. • 1-1/4-inch thick treated medium density fiber board work surface provides a large, convenient work area. • Work surface includes a finished front edge. • Full width steel support beam on the back of the workbench provides greater strength and rigidity. Also acts as back stop for project centers. • “Positive-Fit” construction provides easy, quick assembly. All fastening hardware is included. • Includes adjustable leveling feet. Overall 66" W x 24" D x 39" H (with levelers) 168cm x 61cm x 99cm
CADET-1605 – 5-DRAWER PROJECT CENTER CADET-1605
• Includes 5 full extension steel drawers that glide on steel compound drawer slides. Steel inner walls provide added strength and durability. • A finished, 1/2-inch thick medium density fiber board work top is included. • 4" x 1.75" swivel casters (2 with toe locks) make it easy to maneuver this cabinet in all directions. Glide down a narrow passage way between parked cars or be guided under the CADET Workbench for storage. • Cabinet is fully lockable with steel bar lock and key coded cylinder lock for added security. Overall 26-1/2" W x 16" D x 34-3/8" H (with casters) 67cm x 40,6cm x 87cm 3 Drawers 21-3/8" W x 15" D x 4" H, 54cm x 38,1cm x 10cm 2 Drawers 21-3/8" W x 15" D x 6" H, 54cm x 38,1cm x 15cm
63506D Garage-Cadet.qxp:63506D Garage-Cadet
4/22/09
3:26 PM
Page 2
GARAGE STORAGE & ORGANIZATION
GARAGE STORAGE & ORGANIZATION
GARAGE STORAGE & ORGANIZATION
FULLY WELDED CONSTRUCTION
FULLY WELDED CONSTRUCTION
FULLY WELDED CONSTRUCTION
CADET-1600 – 2-DOOR PROJECT CENTER CADET-7203
CADET 7203– 2-DOOR STORAGE CABINET • Extra large capacity storage cabinet has 72-inches of vertical storage – making the most of its 36-inch width and 18-inch depth. More storage than many other floor cabinets. • Full length steel doors open up to 180 degrees. • Cabinet is fully lockable with key coded cylinder lock. • All steel construction. • Includes 2 adjustable steel shelves that can be adjusted in four-inch increments and a fixed steel shelf. • Includes adjustable leveling feet. Overall 36" W x 18" D x 72" H 91cm x 46cm x 183cm (without levelers)
CADET-1250 • Includes 2 adjustable steel shelves that can be adjusted in two-inch increments. • Steel pegboard side panels allow for hanging storage which is ideal for electrical cords, trouble lights, levels and more. • A finished, 1/2-inch thick medium density fiber board work top is included. • 4" x 1.75" swivel casters (2 with toe locks) make it easy to maneuver this cabinet in all directions. Glide down a narrow passage way between parked cars or be guided under the CADET Workbench for storage. • Cabinet is fully lockable with 2 point locking bar and key coded cylinder lock for added security. Overall 26-1/2" W x 16" D x 34-3/8" H (with casters) 67cm x 40,6cm x 87cm
CADET-1250– 2-DOOR WALL CABINET • Cabinet is fully lockable with 2 point locking bar and key coded cylinder lock for added security. • Includes 2 adjustable steel shelves that can be adjusted in two-inch increments. • Steel pegboard side panels allow for hanging storage which is ideal for electrical cords, trouble lights, levels and more. Overall 26-1/2" W x 12-1/4" D x 29" H 67cm x 31cm x 74cm
CADET-1600
CADET-6624
CADET-6624 – WORKBENCH • All steel frame construction can stand up to daily use. • 1-1/4-inch thick treated medium density fiber board work surface provides a large, convenient work area. • Work surface includes a finished front edge. • Full width steel support beam on the back of the workbench provides greater strength and rigidity. Also acts as back stop for project centers. • “Positive-Fit” construction provides easy, quick assembly. All fastening hardware is included. • Includes adjustable leveling feet. Overall 66" W x 24" D x 39" H (with levelers) 168cm x 61cm x 99cm
CADET-1605 – 5-DRAWER PROJECT CENTER CADET-1605
• Includes 5 full extension steel drawers that glide on steel compound drawer slides. Steel inner walls provide added strength and durability. • A finished, 1/2-inch thick medium density fiber board work top is included. • 4" x 1.75" swivel casters (2 with toe locks) make it easy to maneuver this cabinet in all directions. Glide down a narrow passage way between parked cars or be guided under the CADET Workbench for storage. • Cabinet is fully lockable with steel bar lock and key coded cylinder lock for added security. Overall 26-1/2" W x 16" D x 34-3/8" H (with casters) 67cm x 40,6cm x 87cm 3 Drawers 21-3/8" W x 15" D x 4" H, 54cm x 38,1cm x 10cm 2 Drawers 21-3/8" W x 15" D x 6" H, 54cm x 38,1cm x 15cm
63506D Garage-Cadet.qxp:63506D Garage-Cadet
4/22/09
3:22 PM
Page 1
GARAGE STORAGE & ORGANIZATION
GARAGE STORAGE & ORGANIZATION
FEATURES
FULLY WELDED CONSTRUCTION
• Versatile garage storage components allow you to pick and choose the items that meet your storage needs. As your needs change or grow it is easy to add components to increase organization needs. • All steel construction can stand up to daily use.
FULLY WELDED CONSTRUCTION
• Gloss black and silver tread plate baked epoxy paint finish resists solvents and moisture. • Units are fully lockable to keep tools, chemicals and other supplies in place and out of the reach of small children.
ALL CABINETS ARE FULLY LOCKABLE
LARGE CAPACITY FLOOR CABINET BAKED EPOXY POWDER PAINT FINISH CADET-SET – 6 PIECE GARAGE STORAGE SYSTEM Includes the following items: 2 - CADET-1250 Wall Cabinets, 1 - CADET-1600 2 door project center, 1 - CADET-1605 5 drawer project center, 1 - CADET-6624 workbench and 1 - CADET-7203 locker. Set is shipped on an individual skid and can be drop shipped.
ALL STEEL CONSTRUCTION
ADJUSTABLE FLOOR LEVELERS
P.O. Box 489, 1360 N. Old Rand Road, Wauconda, IL 60084 USA Phone: 847-526-1611, Fax: 847-526-6599, 1-800-323-9601, www.stack-on.com NOTE: The tools and supplies shown are for illustration purposes only and are not included with our tool storage products. Dimensions: Height-top to bottom; Width-left to right; Depth-front to back. All specifications subject to change without notice. 042009-500
® Registered trademark/ TM Trademark of Whirlpool U.S.A. © 2009. All Rights Reserved. Manufactured under license by Stack-On Products Co. Wauconda, IL.
63506D Garage-Cadet.qxp:63506D Garage-Cadet
4/22/09
3:22 PM
Page 1
GARAGE STORAGE & ORGANIZATION
GARAGE STORAGE & ORGANIZATION
FEATURES
FULLY WELDED CONSTRUCTION
• Versatile garage storage components allow you to pick and choose the items that meet your storage needs. As your needs change or grow it is easy to add components to increase organization needs. • All steel construction can stand up to daily use.
FULLY WELDED CONSTRUCTION
• Gloss black and silver tread plate baked epoxy paint finish resists solvents and moisture. • Units are fully lockable to keep tools, chemicals and other supplies in place and out of the reach of small children.
ALL CABINETS ARE FULLY LOCKABLE
LARGE CAPACITY FLOOR CABINET BAKED EPOXY POWDER PAINT FINISH CADET-SET – 6 PIECE GARAGE STORAGE SYSTEM Includes the following items: 2 - CADET-1250 Wall Cabinets, 1 - CADET-1600 2 door project center, 1 - CADET-1605 5 drawer project center, 1 - CADET-6624 workbench and 1 - CADET-7203 locker. Set is shipped on an individual skid and can be drop shipped.
ALL STEEL CONSTRUCTION
ADJUSTABLE FLOOR LEVELERS
P.O. Box 489, 1360 N. Old Rand Road, Wauconda, IL 60084 USA Phone: 847-526-1611, Fax: 847-526-6599, 1-800-323-9601, www.stack-on.com NOTE: The tools and supplies shown are for illustration purposes only and are not included with our tool storage products. Dimensions: Height-top to bottom; Width-left to right; Depth-front to back. All specifications subject to change without notice. 042009-500
® Registered trademark/ TM Trademark of Whirlpool U.S.A. © 2009. All Rights Reserved. Manufactured under license by Stack-On Products Co. Wauconda, IL.
Storage & Organization Steel Construction, Pre-Assembled
Storage & Organization Steel Construction, Pre-Assembled
SGO-6624 – 66" WORKBENCH • All steel construction provides greater strength and durability. • Large 1" thick, treated MDF work surface provides a large work area. • Engineered design makes assembly quick and easy. • Adjustable leveling feet are included. • Assembly required. Overall 66" W x 24" D x 39" H 167.6cm x 61cm x 99.1cm
SGO-6624
STACK-ON GARAGE ORGANIZATION Pre-assembled storage cabinets for the garage, work shop, laundry room, and more. Enhance the appearance of any area with these durable storage solutions. • All steel construction for greater strength and durability. • Adjustable shelves allow you to customize the cabinet interiors to meet your storage needs. • 4 drawer base cabinet includes ball bearing drawer glides for greater strength and performance. • Most units are fully assembled – just add the leveling feet. (Included) Stack-On Products Company P.O. Box 489, 1360 N. Old Rand Road, Wauconda, IL 60084 USA Phone: 847-526-1611, Fax: 847-526-6599, 1-800-323-9601 www.stack-on.com
65765 GarageSeries-SGO.indd 1
NOTE: The tools and supplies shown are for illustration purposes only and are not included with the storage products. Dimensions: Height-top to bottom; Width-left to right; Depth-front to back. All specifications subject to change without notice. 052010-1500
4/20/10 11:58:29 AM
Storage & Organization Steel Construction, Pre-Assembled
Storage & Organization Steel Construction, Pre-Assembled
SGO-1600 SGO-372
SGO-1600 – 2 DOOR PROJECT CENTER
SGO-372 – 2 DOOR STORAGE CABINET
• Cabinet is assembled–just need to add leveling base. Includes leveling feet. • All steel construction provides greater strength and durability. • Doors open up to 180 degrees allowing for greater access. • Includes 2 adjustable steel shelves. • Includes adjustable leveling feet and pedestal– installation required. Overall 26-1/2" W x 16" D x 34-1/2" H 67.3cm x 40.6cm x 87.6cm
• Large capacity storage cabinet has 72" of vertical storage to maximize your storage space. • Cabinet is assembled–just need to add leveling feet–which are included. • All steel construction provides greater strength and durability . • Doors open up to 180 degrees allowing for greater access. • Includes 2 adjustable steel shelves and 1 fixed shelf. Overall 36" W x 18" D x 72" H 91.4cm x 45.7cm x 182.9cm
SGO-1604 – 4 DRAWER PROJECT CENTER
SGO-1250 – 2 DOOR WALL CABINET • Wall cabinets provide out of the way storage when floor space is at a premium. • Unit is fully assembled and easy to hang. • All steel construction provides greater strength and durability. • Doors open up to 180 degrees allowing for greater access. • Includes 2 adjustable steel shelves. Overall 26-1/2" W x 12-1/4" D x 29" H 67.3cm x 31.1cm x 73.7cm
65765 GarageSeries-SGO.indd 2
SGO-1250
• Cabinet is assembled–just need to add leveling base. Includes leveling feet. • All steel construction provides greater strength and durability. • Drawers glide on ball bearing slides, even when loaded. • Includes adjustable leveling feet and pedestal – installation required. Overall 26-1/2" W x 16" D x 34-1/2" H 67.3cm x 40.6cm x 87.6cm
SGO-1604
4/20/10 11:58:55 AM
Storage & Organization Steel Construction, Pre-Assembled
Storage & Organization Steel Construction, Pre-Assembled
SGO-1600 SGO-372
SGO-1600 – 2 DOOR PROJECT CENTER
SGO-372 – 2 DOOR STORAGE CABINET
• Cabinet is assembled–just need to add leveling base. Includes leveling feet. • All steel construction provides greater strength and durability. • Doors open up to 180 degrees allowing for greater access. • Includes 2 adjustable steel shelves. • Includes adjustable leveling feet and pedestal– installation required. Overall 26-1/2" W x 16" D x 34-1/2" H 67.3cm x 40.6cm x 87.6cm
• Large capacity storage cabinet has 72" of vertical storage to maximize your storage space. • Cabinet is assembled–just need to add leveling feet–which are included. • All steel construction provides greater strength and durability . • Doors open up to 180 degrees allowing for greater access. • Includes 2 adjustable steel shelves and 1 fixed shelf. Overall 36" W x 18" D x 72" H 91.4cm x 45.7cm x 182.9cm
SGO-1604 – 4 DRAWER PROJECT CENTER
SGO-1250 – 2 DOOR WALL CABINET • Wall cabinets provide out of the way storage when floor space is at a premium. • Unit is fully assembled and easy to hang. • All steel construction provides greater strength and durability. • Doors open up to 180 degrees allowing for greater access. • Includes 2 adjustable steel shelves. Overall 26-1/2" W x 12-1/4" D x 29" H 67.3cm x 31.1cm x 73.7cm
65765 GarageSeries-SGO.indd 2
SGO-1250
• Cabinet is assembled–just need to add leveling base. Includes leveling feet. • All steel construction provides greater strength and durability. • Drawers glide on ball bearing slides, even when loaded. • Includes adjustable leveling feet and pedestal – installation required. Overall 26-1/2" W x 16" D x 34-1/2" H 67.3cm x 40.6cm x 87.6cm
SGO-1604
4/20/10 11:58:55 AM
Storage & Organization Steel Construction, Pre-Assembled
Storage & Organization Steel Construction, Pre-Assembled
SGO-6624 – 66" WORKBENCH • All steel construction provides greater strength and durability. • Large 1" thick, treated MDF work surface provides a large work area. • Engineered design makes assembly quick and easy. • Adjustable leveling feet are included. • Assembly required. Overall 66" W x 24" D x 39" H 167.6cm x 61cm x 99.1cm
SGO-6624
STACK-ON GARAGE ORGANIZATION Pre-assembled storage cabinets for the garage, work shop, laundry room, and more. Enhance the appearance of any area with these durable storage solutions. • All steel construction for greater strength and durability. • Adjustable shelves allow you to customize the cabinet interiors to meet your storage needs. • 4 drawer base cabinet includes ball bearing drawer glides for greater strength and performance. • Most units are fully assembled – just add the leveling feet. (Included) Stack-On Products Company P.O. Box 489, 1360 N. Old Rand Road, Wauconda, IL 60084 USA Phone: 847-526-1611, Fax: 847-526-6599, 1-800-323-9601 www.stack-on.com
65765 GarageSeries-SGO.indd 1
NOTE: The tools and supplies shown are for illustration purposes only and are not included with the storage products. Dimensions: Height-top to bottom; Width-left to right; Depth-front to back. All specifications subject to change without notice. 052010-1500
4/20/10 11:58:29 AM
4/22/09
3:22 PM
Page 1
GARAGE STORAGE & ORGANIZATION
GARAGE STORAGE & ORGANIZATION
FEATURES
FULLY WELDED CONSTRUCTION
• Versatile garage storage components allow you to pick and choose the items that meet your storage needs. As your needs change or grow it is easy to add components to increase organization needs. • All steel construction can stand up to daily use.
FULLY WELDED CONSTRUCTION
• Gloss black and silver tread plate baked epoxy paint finish resists solvents and moisture. • Units are fully lockable to keep tools, chemicals and other supplies in place and out of the reach of small children.
ALL CABINETS ARE FULLY LOCKABLE
LARGE CAPACITY FLOOR CABINET BAKED EPOXY POWDER PAINT FINISH CADET-SET – 6 PIECE GARAGE STORAGE SYSTEM Includes the following items: 2 - CADET-1250 Wall Cabinets, 1 - CADET-1600 2 door project center, 1 - CADET-1605 5 drawer project center, 1 - CADET-6624 workbench and 1 - CADET-7203 locker. Set is shipped on an individual skid and can be drop shipped.
ALL STEEL CONSTRUCTION
ADJUSTABLE FLOOR LEVELERS
P.O. Box 489, 1360 N. Old Rand Road, Wauconda, IL 60084 USA Phone: 847-526-1611, Fax: 847-526-6599, 1-800-323-9601, www.stack-on.com NOTE: The tools and supplies shown are for illustration purposes only and are not included with our tool storage products. Dimensions: Height-top to bottom; Width-left to right; Depth-front to back. All specifications subject to change without notice. 042009-500
® Registered trademark/ TM Trademark of Whirlpool U.S.A. © 2009. All Rights Reserved. Manufactured under license by Stack-On Products Co. Wauconda, IL.
63506D Garage-Cadet.qxp:63506D Garage-Cadet
4/22/09
3:26 PM
Page 2
GARAGE STORAGE & ORGANIZATION
GARAGE STORAGE & ORGANIZATION
GARAGE STORAGE & ORGANIZATION
FULLY WELDED CONSTRUCTION
FULLY WELDED CONSTRUCTION
FULLY WELDED CONSTRUCTION
CADET-1600 – 2-DOOR PROJECT CENTER CADET-7203
CADET 7203– 2-DOOR STORAGE CABINET • Extra large capacity storage cabinet has 72-inches of vertical storage – making the most of its 36-inch width and 18-inch depth. More storage than many other floor cabinets. • Full length steel doors open up to 180 degrees. • Cabinet is fully lockable with key coded cylinder lock. • All steel construction. • Includes 2 adjustable steel shelves that can be adjusted in four-inch increments and a fixed steel shelf. • Includes adjustable leveling feet. Overall 36" W x 18" D x 72" H 91cm x 46cm x 183cm (without levelers)
CADET-1250 • Includes 2 adjustable steel shelves that can be adjusted in two-inch increments. • Steel pegboard side panels allow for hanging storage which is ideal for electrical cords, trouble lights, levels and more. • A finished, 1/2-inch thick medium density fiber board work top is included. • 4" x 1.75" swivel casters (2 with toe locks) make it easy to maneuver this cabinet in all directions. Glide down a narrow passage way between parked cars or be guided under the CADET Workbench for storage. • Cabinet is fully lockable with 2 point locking bar and key coded cylinder lock for added security. Overall 26-1/2" W x 16" D x 34-3/8" H (with casters) 67cm x 40,6cm x 87cm
CADET-1250– 2-DOOR WALL CABINET • Cabinet is fully lockable with 2 point locking bar and key coded cylinder lock for added security. • Includes 2 adjustable steel shelves that can be adjusted in two-inch increments. • Steel pegboard side panels allow for hanging storage which is ideal for electrical cords, trouble lights, levels and more. Overall 26-1/2" W x 12-1/4" D x 29" H 67cm x 31cm x 74cm
CADET-1600
CADET-6624
CADET-6624 – WORKBENCH • All steel frame construction can stand up to daily use. • 1-1/4-inch thick treated medium density fiber board work surface provides a large, convenient work area. • Work surface includes a finished front edge. • Full width steel support beam on the back of the workbench provides greater strength and rigidity. Also acts as back stop for project centers. • “Positive-Fit” construction provides easy, quick assembly. All fastening hardware is included. • Includes adjustable leveling feet. Overall 66" W x 24" D x 39" H (with levelers) 168cm x 61cm x 99cm
CADET-1605 – 5-DRAWER PROJECT CENTER CADET-1605
• Includes 5 full extension steel drawers that glide on steel compound drawer slides. Steel inner walls provide added strength and durability. • A finished, 1/2-inch thick medium density fiber board work top is included. • 4" x 1.75" swivel casters (2 with toe locks) make it easy to maneuver this cabinet in all directions. Glide down a narrow passage way between parked cars or be guided under the CADET Workbench for storage. • Cabinet is fully lockable with steel bar lock and key coded cylinder lock for added security. Overall 26-1/2" W x 16" D x 34-3/8" H (with casters) 67cm x 40,6cm x 87cm 3 Drawers 21-3/8" W x 15" D x 4" H, 54cm x 38,1cm x 10cm 2 Drawers 21-3/8" W x 15" D x 6" H, 54cm x 38,1cm x 15cm
63506D Garage-Cadet.qxp:63506D Garage-Cadet
4/22/09
3:26 PM
Page 2
GARAGE STORAGE & ORGANIZATION
GARAGE STORAGE & ORGANIZATION
GARAGE STORAGE & ORGANIZATION
FULLY WELDED CONSTRUCTION
FULLY WELDED CONSTRUCTION
FULLY WELDED CONSTRUCTION
CADET-1600 – 2-DOOR PROJECT CENTER CADET-7203
CADET 7203– 2-DOOR STORAGE CABINET • Extra large capacity storage cabinet has 72-inches of vertical storage – making the most of its 36-inch width and 18-inch depth. More storage than many other floor cabinets. • Full length steel doors open up to 180 degrees. • Cabinet is fully lockable with key coded cylinder lock. • All steel construction. • Includes 2 adjustable steel shelves that can be adjusted in four-inch increments and a fixed steel shelf. • Includes adjustable leveling feet. Overall 36" W x 18" D x 72" H 91cm x 46cm x 183cm (without levelers)
CADET-1250 • Includes 2 adjustable steel shelves that can be adjusted in two-inch increments. • Steel pegboard side panels allow for hanging storage which is ideal for electrical cords, trouble lights, levels and more. • A finished, 1/2-inch thick medium density fiber board work top is included. • 4" x 1.75" swivel casters (2 with toe locks) make it easy to maneuver this cabinet in all directions. Glide down a narrow passage way between parked cars or be guided under the CADET Workbench for storage. • Cabinet is fully lockable with 2 point locking bar and key coded cylinder lock for added security. Overall 26-1/2" W x 16" D x 34-3/8" H (with casters) 67cm x 40,6cm x 87cm
CADET-1250– 2-DOOR WALL CABINET • Cabinet is fully lockable with 2 point locking bar and key coded cylinder lock for added security. • Includes 2 adjustable steel shelves that can be adjusted in two-inch increments. • Steel pegboard side panels allow for hanging storage which is ideal for electrical cords, trouble lights, levels and more. Overall 26-1/2" W x 12-1/4" D x 29" H 67cm x 31cm x 74cm
CADET-1600
CADET-6624
CADET-6624 – WORKBENCH • All steel frame construction can stand up to daily use. • 1-1/4-inch thick treated medium density fiber board work surface provides a large, convenient work area. • Work surface includes a finished front edge. • Full width steel support beam on the back of the workbench provides greater strength and rigidity. Also acts as back stop for project centers. • “Positive-Fit” construction provides easy, quick assembly. All fastening hardware is included. • Includes adjustable leveling feet. Overall 66" W x 24" D x 39" H (with levelers) 168cm x 61cm x 99cm
CADET-1605 – 5-DRAWER PROJECT CENTER CADET-1605
• Includes 5 full extension steel drawers that glide on steel compound drawer slides. Steel inner walls provide added strength and durability. • A finished, 1/2-inch thick medium density fiber board work top is included. • 4" x 1.75" swivel casters (2 with toe locks) make it easy to maneuver this cabinet in all directions. Glide down a narrow passage way between parked cars or be guided under the CADET Workbench for storage. • Cabinet is fully lockable with steel bar lock and key coded cylinder lock for added security. Overall 26-1/2" W x 16" D x 34-3/8" H (with casters) 67cm x 40,6cm x 87cm 3 Drawers 21-3/8" W x 15" D x 4" H, 54cm x 38,1cm x 10cm 2 Drawers 21-3/8" W x 15" D x 6" H, 54cm x 38,1cm x 15cm
63506D Garage-Cadet.qxp:63506D Garage-Cadet
4/22/09
3:26 PM
Page 2
GARAGE STORAGE & ORGANIZATION
GARAGE STORAGE & ORGANIZATION
GARAGE STORAGE & ORGANIZATION
FULLY WELDED CONSTRUCTION
FULLY WELDED CONSTRUCTION
FULLY WELDED CONSTRUCTION
CADET-1600 – 2-DOOR PROJECT CENTER CADET-7203
CADET 7203– 2-DOOR STORAGE CABINET • Extra large capacity storage cabinet has 72-inches of vertical storage – making the most of its 36-inch width and 18-inch depth. More storage than many other floor cabinets. • Full length steel doors open up to 180 degrees. • Cabinet is fully lockable with key coded cylinder lock. • All steel construction. • Includes 2 adjustable steel shelves that can be adjusted in four-inch increments and a fixed steel shelf. • Includes adjustable leveling feet. Overall 36" W x 18" D x 72" H 91cm x 46cm x 183cm (without levelers)
CADET-1250 • Includes 2 adjustable steel shelves that can be adjusted in two-inch increments. • Steel pegboard side panels allow for hanging storage which is ideal for electrical cords, trouble lights, levels and more. • A finished, 1/2-inch thick medium density fiber board work top is included. • 4" x 1.75" swivel casters (2 with toe locks) make it easy to maneuver this cabinet in all directions. Glide down a narrow passage way between parked cars or be guided under the CADET Workbench for storage. • Cabinet is fully lockable with 2 point locking bar and key coded cylinder lock for added security. Overall 26-1/2" W x 16" D x 34-3/8" H (with casters) 67cm x 40,6cm x 87cm
CADET-1250– 2-DOOR WALL CABINET • Cabinet is fully lockable with 2 point locking bar and key coded cylinder lock for added security. • Includes 2 adjustable steel shelves that can be adjusted in two-inch increments. • Steel pegboard side panels allow for hanging storage which is ideal for electrical cords, trouble lights, levels and more. Overall 26-1/2" W x 12-1/4" D x 29" H 67cm x 31cm x 74cm
CADET-1600
CADET-6624
CADET-6624 – WORKBENCH • All steel frame construction can stand up to daily use. • 1-1/4-inch thick treated medium density fiber board work surface provides a large, convenient work area. • Work surface includes a finished front edge. • Full width steel support beam on the back of the workbench provides greater strength and rigidity. Also acts as back stop for project centers. • “Positive-Fit” construction provides easy, quick assembly. All fastening hardware is included. • Includes adjustable leveling feet. Overall 66" W x 24" D x 39" H (with levelers) 168cm x 61cm x 99cm
CADET-1605 – 5-DRAWER PROJECT CENTER CADET-1605
• Includes 5 full extension steel drawers that glide on steel compound drawer slides. Steel inner walls provide added strength and durability. • A finished, 1/2-inch thick medium density fiber board work top is included. • 4" x 1.75" swivel casters (2 with toe locks) make it easy to maneuver this cabinet in all directions. Glide down a narrow passage way between parked cars or be guided under the CADET Workbench for storage. • Cabinet is fully lockable with steel bar lock and key coded cylinder lock for added security. Overall 26-1/2" W x 16" D x 34-3/8" H (with casters) 67cm x 40,6cm x 87cm 3 Drawers 21-3/8" W x 15" D x 4" H, 54cm x 38,1cm x 10cm 2 Drawers 21-3/8" W x 15" D x 6" H, 54cm x 38,1cm x 15cm
63506D Garage-Cadet.qxp:63506D Garage-Cadet
4/22/09
3:22 PM
Page 1
GARAGE STORAGE & ORGANIZATION
GARAGE STORAGE & ORGANIZATION
FEATURES
FULLY WELDED CONSTRUCTION
• Versatile garage storage components allow you to pick and choose the items that meet your storage needs. As your needs change or grow it is easy to add components to increase organization needs. • All steel construction can stand up to daily use.
FULLY WELDED CONSTRUCTION
• Gloss black and silver tread plate baked epoxy paint finish resists solvents and moisture. • Units are fully lockable to keep tools, chemicals and other supplies in place and out of the reach of small children.
ALL CABINETS ARE FULLY LOCKABLE
LARGE CAPACITY FLOOR CABINET BAKED EPOXY POWDER PAINT FINISH CADET-SET – 6 PIECE GARAGE STORAGE SYSTEM Includes the following items: 2 - CADET-1250 Wall Cabinets, 1 - CADET-1600 2 door project center, 1 - CADET-1605 5 drawer project center, 1 - CADET-6624 workbench and 1 - CADET-7203 locker. Set is shipped on an individual skid and can be drop shipped.
ALL STEEL CONSTRUCTION
ADJUSTABLE FLOOR LEVELERS
P.O. Box 489, 1360 N. Old Rand Road, Wauconda, IL 60084 USA Phone: 847-526-1611, Fax: 847-526-6599, 1-800-323-9601, www.stack-on.com NOTE: The tools and supplies shown are for illustration purposes only and are not included with our tool storage products. Dimensions: Height-top to bottom; Width-left to right; Depth-front to back. All specifications subject to change without notice. 042009-500
® Registered trademark/ TM Trademark of Whirlpool U.S.A. © 2009. All Rights Reserved. Manufactured under license by Stack-On Products Co. Wauconda, IL.
63506D Garage-Cadet.qxp:63506D Garage-Cadet
4/22/09
3:22 PM
Page 1
GARAGE STORAGE & ORGANIZATION
GARAGE STORAGE & ORGANIZATION
FEATURES
FULLY WELDED CONSTRUCTION
• Versatile garage storage components allow you to pick and choose the items that meet your storage needs. As your needs change or grow it is easy to add components to increase organization needs. • All steel construction can stand up to daily use.
FULLY WELDED CONSTRUCTION
• Gloss black and silver tread plate baked epoxy paint finish resists solvents and moisture. • Units are fully lockable to keep tools, chemicals and other supplies in place and out of the reach of small children.
ALL CABINETS ARE FULLY LOCKABLE
LARGE CAPACITY FLOOR CABINET BAKED EPOXY POWDER PAINT FINISH CADET-SET – 6 PIECE GARAGE STORAGE SYSTEM Includes the following items: 2 - CADET-1250 Wall Cabinets, 1 - CADET-1600 2 door project center, 1 - CADET-1605 5 drawer project center, 1 - CADET-6624 workbench and 1 - CADET-7203 locker. Set is shipped on an individual skid and can be drop shipped.
ALL STEEL CONSTRUCTION
ADJUSTABLE FLOOR LEVELERS
P.O. Box 489, 1360 N. Old Rand Road, Wauconda, IL 60084 USA Phone: 847-526-1611, Fax: 847-526-6599, 1-800-323-9601, www.stack-on.com NOTE: The tools and supplies shown are for illustration purposes only and are not included with our tool storage products. Dimensions: Height-top to bottom; Width-left to right; Depth-front to back. All specifications subject to change without notice. 042009-500
® Registered trademark/ TM Trademark of Whirlpool U.S.A. © 2009. All Rights Reserved. Manufactured under license by Stack-On Products Co. Wauconda, IL.
Storage & Organization Steel Construction, Pre-Assembled
Storage & Organization Steel Construction, Pre-Assembled
SGO-6624 – 66" WORKBENCH • All steel construction provides greater strength and durability. • Large 1" thick, treated MDF work surface provides a large work area. • Engineered design makes assembly quick and easy. • Adjustable leveling feet are included. • Assembly required. Overall 66" W x 24" D x 39" H 167.6cm x 61cm x 99.1cm
SGO-6624
STACK-ON GARAGE ORGANIZATION Pre-assembled storage cabinets for the garage, work shop, laundry room, and more. Enhance the appearance of any area with these durable storage solutions. • All steel construction for greater strength and durability. • Adjustable shelves allow you to customize the cabinet interiors to meet your storage needs. • 4 drawer base cabinet includes ball bearing drawer glides for greater strength and performance. • Most units are fully assembled – just add the leveling feet. (Included) Stack-On Products Company P.O. Box 489, 1360 N. Old Rand Road, Wauconda, IL 60084 USA Phone: 847-526-1611, Fax: 847-526-6599, 1-800-323-9601 www.stack-on.com
65765 GarageSeries-SGO.indd 1
NOTE: The tools and supplies shown are for illustration purposes only and are not included with the storage products. Dimensions: Height-top to bottom; Width-left to right; Depth-front to back. All specifications subject to change without notice. 052010-1500
4/20/10 11:58:29 AM
Storage & Organization Steel Construction, Pre-Assembled
Storage & Organization Steel Construction, Pre-Assembled
SGO-1600 SGO-372
SGO-1600 – 2 DOOR PROJECT CENTER
SGO-372 – 2 DOOR STORAGE CABINET
• Cabinet is assembled–just need to add leveling base. Includes leveling feet. • All steel construction provides greater strength and durability. • Doors open up to 180 degrees allowing for greater access. • Includes 2 adjustable steel shelves. • Includes adjustable leveling feet and pedestal– installation required. Overall 26-1/2" W x 16" D x 34-1/2" H 67.3cm x 40.6cm x 87.6cm
• Large capacity storage cabinet has 72" of vertical storage to maximize your storage space. • Cabinet is assembled–just need to add leveling feet–which are included. • All steel construction provides greater strength and durability . • Doors open up to 180 degrees allowing for greater access. • Includes 2 adjustable steel shelves and 1 fixed shelf. Overall 36" W x 18" D x 72" H 91.4cm x 45.7cm x 182.9cm
SGO-1604 – 4 DRAWER PROJECT CENTER
SGO-1250 – 2 DOOR WALL CABINET • Wall cabinets provide out of the way storage when floor space is at a premium. • Unit is fully assembled and easy to hang. • All steel construction provides greater strength and durability. • Doors open up to 180 degrees allowing for greater access. • Includes 2 adjustable steel shelves. Overall 26-1/2" W x 12-1/4" D x 29" H 67.3cm x 31.1cm x 73.7cm
65765 GarageSeries-SGO.indd 2
SGO-1250
• Cabinet is assembled–just need to add leveling base. Includes leveling feet. • All steel construction provides greater strength and durability. • Drawers glide on ball bearing slides, even when loaded. • Includes adjustable leveling feet and pedestal – installation required. Overall 26-1/2" W x 16" D x 34-1/2" H 67.3cm x 40.6cm x 87.6cm
SGO-1604
4/20/10 11:58:55 AM
Storage & Organization Steel Construction, Pre-Assembled
Storage & Organization Steel Construction, Pre-Assembled
SGO-1600 SGO-372
SGO-1600 – 2 DOOR PROJECT CENTER
SGO-372 – 2 DOOR STORAGE CABINET
• Cabinet is assembled–just need to add leveling base. Includes leveling feet. • All steel construction provides greater strength and durability. • Doors open up to 180 degrees allowing for greater access. • Includes 2 adjustable steel shelves. • Includes adjustable leveling feet and pedestal– installation required. Overall 26-1/2" W x 16" D x 34-1/2" H 67.3cm x 40.6cm x 87.6cm
• Large capacity storage cabinet has 72" of vertical storage to maximize your storage space. • Cabinet is assembled–just need to add leveling feet–which are included. • All steel construction provides greater strength and durability . • Doors open up to 180 degrees allowing for greater access. • Includes 2 adjustable steel shelves and 1 fixed shelf. Overall 36" W x 18" D x 72" H 91.4cm x 45.7cm x 182.9cm
SGO-1604 – 4 DRAWER PROJECT CENTER
SGO-1250 – 2 DOOR WALL CABINET • Wall cabinets provide out of the way storage when floor space is at a premium. • Unit is fully assembled and easy to hang. • All steel construction provides greater strength and durability. • Doors open up to 180 degrees allowing for greater access. • Includes 2 adjustable steel shelves. Overall 26-1/2" W x 12-1/4" D x 29" H 67.3cm x 31.1cm x 73.7cm
65765 GarageSeries-SGO.indd 2
SGO-1250
• Cabinet is assembled–just need to add leveling base. Includes leveling feet. • All steel construction provides greater strength and durability. • Drawers glide on ball bearing slides, even when loaded. • Includes adjustable leveling feet and pedestal – installation required. Overall 26-1/2" W x 16" D x 34-1/2" H 67.3cm x 40.6cm x 87.6cm
SGO-1604
4/20/10 11:58:55 AM
Storage & Organization Steel Construction, Pre-Assembled
Storage & Organization Steel Construction, Pre-Assembled
SGO-6624 – 66" WORKBENCH • All steel construction provides greater strength and durability. • Large 1" thick, treated MDF work surface provides a large work area. • Engineered design makes assembly quick and easy. • Adjustable leveling feet are included. • Assembly required. Overall 66" W x 24" D x 39" H 167.6cm x 61cm x 99.1cm
SGO-6624
STACK-ON GARAGE ORGANIZATION Pre-assembled storage cabinets for the garage, work shop, laundry room, and more. Enhance the appearance of any area with these durable storage solutions. • All steel construction for greater strength and durability. • Adjustable shelves allow you to customize the cabinet interiors to meet your storage needs. • 4 drawer base cabinet includes ball bearing drawer glides for greater strength and performance. • Most units are fully assembled – just add the leveling feet. (Included) Stack-On Products Company P.O. Box 489, 1360 N. Old Rand Road, Wauconda, IL 60084 USA Phone: 847-526-1611, Fax: 847-526-6599, 1-800-323-9601 www.stack-on.com
65765 GarageSeries-SGO.indd 1
NOTE: The tools and supplies shown are for illustration purposes only and are not included with the storage products. Dimensions: Height-top to bottom; Width-left to right; Depth-front to back. All specifications subject to change without notice. 052010-1500
4/20/10 11:58:29 AM
