82a-240 series - Apollo Valves

Report 0 Downloads 15 Views
82-200/82A-240 SERIES Bronze 3-Piece Full Port Ball Valve Solder End Vacuum Service to 29 inches Hg. MSS SP-110 compliant. CRN: OC10908.5C

82-200 & 82-240: 600 CWP (psig), 150 SWP (psig) 82A-240: 400 CWP (psig), 150 SWP (psig) * Recommend utilizing SS ball & stem in 150 SWP applications.

FEATURES

• • • • •

OPTIONS AVAILABLE: (More information in Section J)

Adjustable packing gland Blow-out-proof stem design Reinforced seats Inline repairable Full port ball configuration, all sizes

• Minimum quantities apply • To specify an option, replace the “01” standard suffix with the suffix of the option. • To specify multiple options, replace the “01” suffix with the desired suffixes in the numerical order shown below. NOTE: Not all suffixes can be combined together. (SUFFIX) OPTION SIZES -01 Standard Configuration All -02Static Grounded 3/8” to 4” -042.25” Stem Extension (Carbon Steel, Zinc Plated) 3/8” to 2” -05Plain Ball 3/8” to 4” -07Tee Handle 3/8” to 2” -0890º Reversed Stem 3/8” to 4” -10SS Lever & Nut 3/8” to 4” -11Therma-Seal™ Insulating Tee Handle 1/4” to 2” -14Vented Ball 3/8” to 4” -15Round Handle 3/8” to 2” -16Vertical Chain Lever 1/2” to 2” -18Plain Yellow Grip 3/8” to 2” -19Lock plate 3/8” to 2” -20Slot Vented Ball 3/8” to 4” -21UHMWPE Seats 3/8” to 4” -23Tank Flange 2” ONLY -24Graphite Packing 3/8” to 4” -27Latch Lock Lever 1/2” to 2” -30CamLock Handle 3/8” to 1.25” -32SS Tee Handle & Nut 3/8” to 2” -35PTFE Trim 3/8” to 4” -39SS Hi-Rise Locking Wheel Handle, SS Nut 3/8” to 1.25” -40Cyl-Loc & Grounded 3/8” to 1/2” -45Less Lever & Nut 3/8” to 4” -46Latch-Lock Lever - Lock in Closed Position Only 1/2” to 2” -47SS Oval Latch-Lock Handle & Nut 3/8” to 3/4” -48SS Oval Handle (No Latch) & Nut 3/8” to 2” -49No Lubrication. Assembled Dry. 3/8” to 4” -502.25” CS Locking Stem Extension 3/8” to 2” -56Multifill Seats 3/8” - 4” -57Oxygen Cleaned 3/8” to 4” -58Chain Lever - Horizontal 3/8” to 2” -59SS External Trim - 3-pc. Valves 3/8” to 4” -60Grounded Ball & Stem 3/8” to 4” -92Balancing Stop 3/8” to 2”

VARIATIONS AVAILABLE:

82-200 Series 82-240 Series 82A-240 Series

Standard 316 SS Ball & Stem 3” & 4” Only (No Options Available) E

ØA PORT D ØF

B

F

C

STANDARD MATERIAL LIST 1 2 3

PART Lever and grip Stem packing Stem bearing

4

Ball

5

Seat (2)

6

End cap (2)

7

Gland nut

8

Stem

9 10 11 12

Lever nut Body bolt Hex nut Body

PRODUCT NUMBER 82-202-01 82-203-01 82-204-01 82-205-01 82-206-01 82-207-01 82-208-01 82-209-01 82A-240-01 82A-24A-01

SIZE 3/8" 1/2" 3/4" 1" 1.25” 1.5” 2" 2.5” 3” 4”

MATERIAL Steel, zinc plated w/vinyl MPTFE (Chevron style PTFE 82A 3”&4”) RPTFE ASTM B16 Brass,chrome plated (1/4”-2.5”) ASTM 276-316 SS (3”-4”) RPTFE B16 Brass (1/4” to 3/8”), B584-C84400 (1/2”-4”) B16 Brass ASTM B16 Brass, ASTM 276-316 SS (3”-4”) Steel, zinc plated Steel, zinc plated Steel, zinc plated ASTM B584-C84400 (Bronze) A

B

0.44 0.56 0.83 1.00 1.25 1.50 2.00 2.50 3.00 4.00

1.28 1.40 1.71 1.93 2.37 2.62 3.01 3.62 4.18 5.43

C 2.56 2.81 3.43 3.87 4.75 5.25 6.03 7.25 8.37 10.86

D 1.81 1.93 2.18 2.62 2.87 3.37 3.68 5.14 8.10 8.88

E 3.87 4.87 4.87 5.50 5.50 8.00 8.00 9.75 19.13 19.13

F

G

H

0.50 0.63 0.88 1.13 1.38 1.63 2.13 2.63 3.13 4.13

0.38 0.50 0.75 0.90 0.97 1.09 1.34 1.47 1.66 2.16

1.60 1.78 1.98 2.22 2.70 3.03 3.87 5.05 5.82 7.77

WT. 1.04 1.55 2.27 3.28 5.62 8.07 14.42 26.61 43.00 106.00

FOR PRESSURE/TEMPERATURE RATINGS, REFER TO PAGE M-10, GRAPH NO. 4

Copyright ©2016 Apollo Valves, Manufactured by Conbraco Industries - Printed in the USA

B-5

FLOW DATA For Apollo® Ball Valves The listed Cv “factors” are derived from actual flow testing, in the Apollo® Ball Valve Division, Conbraco Industries, Inc., Pageland, South Carolina. These tests were completed using standard “off the shelf” valves with no special preparation and utilizing standard schedule 40 pipe. It should be understood that these factors are for the valve only and also include the connection configuration. The flow testing is done utilizing water as a fluid media and is a direct statement of the gallons of water flowed per minute with a 1 psig pressure differential across the valve/ connection unit. Line pressure is not a factor. Because the Cv is a factor, the formula can be used to estimate flow of most media for valve sizing.

FLOW OF LIQUID

Q = CV



FLOW OF GAS

∆P SpGr

2 (Q) (SpGr) or ∆P = (Cv)2

Where: Q = ΔP = SpGr = Cv =

Q = 1360 CV



(∆P) (P2) (SpGr) (T)

-7 2 5.4 x 10 (SpGr) (T) (Q) or ∆P = (Cv)2 (P2)

Where: Q = ΔP = SpGr = P2 = T = Cv =

flow in US gpm pressure drop (psig) specific gravity at flowing temperature valve constant

flow in SCFH pressure drop (psig) specific gravity (based on air = 1.0) outlet pressure–psia (psig + 14.7) (temp. °F + 460) valve constant

CAUTION: The gas equation shown, is valid at very low pressure drop ratios. The gas equation is NOT valid when the ratio of pressure drop (ΔP) to inlet pressure (P1) exceeds 0.02. NOTE: Only use the gas equation shown if (P1-P2)/P1 is less than 0.02.

Cv FACTORS FOR APOLLO VALVES VALVE 70B-140 Series 70-100/200 Series 70-300/400 Series 70-600 Series 70-800 Series 71-AR Series 71-100/200 Series 72-100/900 Series 73A-100 Series 73-300/400 Series 74-100 Series 75-100 Series 76-AR Series 76F-100 Series 76FJ-100 Series 76FK-100 Series 76-100 Series 76-300/400 Series 76-600 Series 76J-100 Series 76J-AR Series 76K-100 Series 76K-AR Series 7K-100 Series 77-AR Series 77C-100/200 Series 77D-140 Series

1/4 8.4 8.4 -2.3 8.4 ---8.4 -8.4 8.4 8.4 8.1 8.1 8.1 8.4 -2.3 8.4 8.4 8.4 8.4 -8.1 4.5 4.5

3/8 7.2 7.2 -4.5 7.2 ---7.2 -7.2 7.2 7.2 15 15 15 7.2 -4.5 7.2 7.2 7.2 7.2 -15 7.2 7.2

1/2 15 15 15 5.4 15 --26 15 26 15 15 15 15 15 15 15 26 5.4 15 15 15 15 15 15 16 16

3/4 30 30 30 12 30 30 30 48 30 48 30 30 30 51 51 51 30 48 12 30 30 30 30 51 51 36 36

1 43 43 43 14 43 43 43 65 43 65 43 43 43 68 68 68 43 65 14 43 43 43 43 68 68 68 68

1.25 48 48 48 21 48 48 48 125 48 125 48 48 48 125 125 125 48 125 21 48 48 48 48 125 125 125 125

1.5 84 84 84 34 84 84 84 170 84 170 84 84 84 177 177 177 84 170 34 84 84 84 84 177 177 177 177

SIZE (IN.) 2 108 108 108­ 47 -108 108 216 108 216 108 108 108 389 389 389 108 216 47 108 108 108 108 389 389 389 389

2.5 190 190 ---190 190 ---190 190 190 ---190 --190 190 190 190 503 -503 --

3 370 370 ---370 370 ---370 370 370 ---370 --370 370 370 370 -----

4 670 670 --------670 670 670 -------670 -670 -----

6 ----------------------------

8 ----------------------------

10 ----------------------------

12 -----------------------------

continued on next page

Copyright ©2016 Apollo Valves, Manufactured by Conbraco Industries - Printed in the USA

M-3

FLOW DATA For Apollo® Ball Valves Cv FACTORS FOR APOLLO VALVES (continued from M-3) VALVE 77D-640 Series 77G-UL Series 77W Series 77-100/200 Series 79 Series 80 Series 82-100/200 Series 83A/83B Series 83R-100/200 Series 86A/86B Series 86R-100/200 Series 87A-100 Series 87A-200 Series 87A-700 Series 87A-900 Series 87A-F00 Series 87B-100 Series 87J-100 Series 87J-200 Series 87J-700 Series 87J-900 Series 87K-100 Series 87K-200 Series 87K-700 Series 87K-900 Series 88A-100 Series 88A-200 Series 88A-700 Series 88A-900 Series 88A-F00 Series 88B-100 Series 89-100 Series 9A-100 Series 90-100 Series 92-100 Series 93-100 Series 94A-100/200 Series 96-100 Series 399-100 Series 489-100 Series

M-4

1/4 -4.5 -8.1 8.5 8.4 8.1 8.1 -8.1 ---------------------8.4 8.3 8.3 8.3 8.3 6 8.3 8.4 8.4

3/8 -7.2 -15 8.5 7.2 14 14 -14 ---------------------7.2 6.7 6.7 6.7 6.7 7 6.7 7.2 7.2

1/2 -16 16 15 9.8 15 26 26 -26 --15 -15 ---15 -15 -15 -15 -15 -15 --15 5.7 5.7 5.7 5.7 19 5.7 15 15

3/4 11 36 36 51 32 30 51 51 -51 --19 -19 ---19 -19 -19 -19 -19 -19 --30 10 10 10 10 34 10 30 30

1 24 68 68 68 44 43 68 68 -68 --75 -75 75 --75 -75 -75 -75 -75 -75 75 -43 16 16 16 16 50 16 43 43

1.25 35 125 125 125 66 48 120 120 -120 ---------------------48 25 25 25 25 104 25 48 48

1.5 -177 177 177 148 84 170 170 170 170 170 86 195 86 195 195 -86 195 86 195 86 195 86 195 86 195 86 195 195 -84 40 40 40 40 268 40 84 84

SIZE (IN.) 2 -389 389 389 218 108 376 376 376 376 376 104 410 104 410 410 -104 410 104 410 104 410 104 410 104 410 104 410 410 -108 62 62 62 62 309 62 108 108

www.apollovalves.com

2.5 -503 -503 440 190 510 ----234 545 234 545 545 -234 545 234 545 234 545 234 545 234 545 234 545 545 -190 ----629 -190 190

3 ----390 370 996 -996 -996 375 1021 375 1021 1021 375 375 1021 375 1021 375 1021 375 1021 375 1021 375 1021 1021 375 370 ----1018 -370 370

4 ------1893 -1893 -1893 673 2016 673 2016 2016 673 673 2016 673 2016 673 2016 673 2016 673 2016 673 2016 2016 673 -----1622 ----

6 -----------1099 4837 1099 4837 4837 1099 1099 4837 1099 4837 1099 4837 1099 4837 1099 4837 1099 4837 4837 1099 ----------

8 -----------1902 9250 1902 9250 -1902 1902 9250 1902 9250 1902 9250 1902 9250 1902 9250 1902 9250 -1902 ----------

Customer Service (704) 841-6000

10 -----------3890 15170 3890 15170 -3890 3890 15170 3890 15170 3890 15170 3890 15170 3890 15170 3890 15170 -3890 ----------

12 -----

--

-------22390 -22390 ---22390 -22390 -22390 -22390 -22390 -22390 ------------

PRESSURE TEMPERATURE RATINGS 400 CWP

Bronze ASTM B584-C84400

(GRAPH 3)

600 CWP

Bronze ASTM B584-C84400

(GRAPH 4)

M-10

www.apollovalves.com

Customer Service (704) 841-6000