accessories catalog
ACCESSORIES CATALOG
LIVE CENTERS BORING AND FACING HEADS
SKODA LIVE CENTERS
SKODA & STM HEAVY DUTY LIVE CENTERS - CSN 243324 • The rotating spindle is extended right through the tapered shank • Two specially designed adjustable needle-roller bearings carry all radial loads • A heavy duty ball thrust bearing takes all axial thrust • Complete protection of bearings form the ingress of coolant, dirt or swarf is provided by the built-in oil-seal, which also prevents loss of lubricant
Features
SKODA & STM HEAVY DUTY LIVE CENTERS Morse Taper 1 2 3 4 5 6
Centre Point Angle 60° 60° 60° 60° 60° 60°
Body Dia. (in) 5⁄8 7⁄8 1-1⁄8 1-1⁄2 1-3⁄4 2-3⁄8
Body Dia. (in) 1-3⁄8 1-1⁄2 1-7⁄8 2-3⁄16 2-3⁄4 3-1⁄2
Body Length (in) 4-3⁄8 5 6-1⁄4 7-1⁄2 9-1⁄2 12-3⁄4
Maximum Weight of Work Piece 200 lb 600 lb 900 lb 1800 lb 3000 lb 7500 lb
SKODA Code No. 310-105 310-110 310-115 310-120 310-125 310-130
STM Code No. 320-105 320-110 320-115 320-120 320-125 320-130
PARTS FOR HEAVY DUTY LIVE CENTERS 11
10
PARTS FOR HEAVY DUTY LIVE CENTERS Morse Taper 2 3 4 5 6
2-Point Code No. 310-205 310-305 310-405 310-505 310-605
3-Ring Code No. 310-210 310-310 310-410 310-510 310-610
4-Sleeve Code No. 310-215 310-315 310-415 310-515 310-615
5-End Plug Code No. 310-220 310-320 310-420 310-520 310-620
6-Seal Code No. 310-225 310-325 310-425 310-525 310-625
7-Roller Bearing Code No. 310-230 310-330 310-430 310-530 310-630
PARTS FOR HEAVY DUTY LIVE CENTERS Morse Taper 2 3 4 5 6
8-Thrust Bearing Code No. 310-235 310-335 310-435 310-535 310-635
9-Ball Bearing Code No. 310-240 310-340 310-440 310-540 310-640
10-Set Screw Code No. 310-245 310-345 310-445 310-545 310-645
11-Slot Screw Code No. 310-250 310-350 310-450 310-550 310-650
12-Ring Code No. 310-255 310-355 310-455 310-555 310-655
SKODA LIVE CENTERS
SKODA EXTRA HEAVY DUTY LIVE CENTERS - CSN 243325 For clamping of heavy workpieces at lathes. • The rigid structure and seating of the turning part is characterized by long service life • The model EXTRA is commonly used for work at grinding machines • Centres with the apex angle of 60° for reduction of deformations of the machine (tailstock, bed, headstock) from axial clamping forces • The live centres are provided with shanks according to DIN 228 and ISO 296 (without clamping thread)
SKODA EXTRA HEAVY DUTY LIVE CENTERS D (in) 3.14 3.54 4.92 5.70
Morse Taper 4 5 6 7
d (in) 1.58 1.65 2.16 2.56
a 60° 60° 60° 60°
I (in) 4.10 5.60 6.42 7.80
L (in) 7.85 9.48 13.38 15.25
Load (lb) 3300 5500 11000 17600
Weight (lb) 5 9 27 45
Code No. 310-920 310-925 310-930 310-935
SPARE PARTS FOR EXTRA HEAVY DUTY LIVE CENTERS
SPARE PARTS FOR EXTRA HEAVY Parts No. MT 4-02 4-03 4-04 4-05 4-06 4-07 4-08 4-09 4-10 4-11 4-12 4-13 MT 5-02 5-03 5-04 5.05 5.06 5-07 5-08 5-09 5-10 5-11 5-12 5-13
Description 90° Point 60° Point Ring End Plug Sealing Roller Bearing Thrust Bearing Radial Bearing Lock Screw Packing Piece Packing Ring Packing Ring 90° Point 60° Point Ring End Plug Sealing Roller Bearing Thrust Bearing Radial Bearing Lock Screw Packing Piece Packing Ring Packing Ring
Code No. 310-802 310-803 310-804 310-805 310-806 310-807 310-808 310-809 310-810 310-811 310-812 310-813 310-816 310-817 310-818 310-819 310-820 310-821 310-822 310-823 310-824 310-825 310-826 310-827
DUTY LIVE CENTERS Parts No. MT 6-02 6-03 6-04 6-05 6-06 6-07 6-08 6-09 6-10 6-11 6-12 6-13
Description 90° Point 60° Point Ring End Plug Sealing Roller Bearing Thrust Bearing Radial Bearing Lock Screw Packing Piece Packing Ring Packing Ring
Code No. 310-830 310-831 310-832 310-833 310-834 310-835 310-836 310-837 310-838 310-839 310-840 310-841
SKODA LIVE CENTERS
SKODA PRECISION CNC LIVE CENTERS - CSN 243327-II
• The centres are intended for NC lathes. Their face parts are formed to allow easy access of the tool to the workpiece, which is an advantage with workpieces of complex shapes • A special ring is used to set the radial clearance of the centre. It also prevents cutting lubricant from leaking into the centre bearing space, and so extends the operational life of the centre • Spindle-like point extends into shank where it is supported by a needle bearing, increasing rigidity, reducing point deflection and dampening vibration
SKODA PRECISION CNC LIVE CENTERS D (in) 1.5 1.85 2.20 3.10
Morse Taper 2 3 4 5
d (in) .695 .750 1.125 1.375
L (in) 5.25 6.75 8.15 10.50
l (in) 2.65 3.50 3.95 4.85
Load (lb) 1300 1550 4840 7750
Code No. 310-010 310-015 310-020 310-025
SPARE PARTS FOR CNC LIVE CENTERS 11
10
SPARE PARTS FOR CNC LIVE CENTERS Parts No. MT 2-02 2-03 2-04 2-05 2-06 2-07 2-08 2-09 2-10 2-11 2-12 MT 3-02 3-03 3-04 3-05 3-06 3-07 3-08 3-09 3-10 3-11 3-12
Description Point Set Ring Ring End Plug Packing Piece Needle Bearing Thrust Bearing Radial Bearing Countersink Screw Lock Screw Snap Ring Point Set Ring Ring End Plug Packing Piece Needle Bearing Thrust Bearing Radial Bearing Countersink Screw Lock Screw Snap Ring
Code No. 310-855 310-856 310-857 310-858 310-859 310-860 310-861 310-862 310-863 310-864 310-865 310-869 310-870 310-871 310-872 310-873 310-874 310-875 310-876 310-877 310-878 310-879
Parts No. MT 4-02 4-03 4-04 4-05 4-06 4-07 4-08 4-09 4-10 4-11 4-12 MT 5-02 5-03 5-04 5-05 5-06 5-07 5-08 5-09 5-10 5-11 5-12
Description Point Set Ring Ring End Plug Packing Piece Needle Bearing Thrust Bearing Radial Bearing Countersink Screw Lock Screw Snap Ring Point Set Ring Ring End Plug Packing Piece Needle Bearing Thrust Bearing Radial Bearing Countersink Screw Lock Screw Snap Ring
Code No. 310-882 310-883 310-884 310-885 310-886 310-887 310-888 310-889 310-890 310-891 310-892 310-895 310-896 310-897 310-898 310-899 310-900 310-901 310-902 310-903 310-904 310-905
SKODA LIVE CENTERS
SKODA EXTENDED POINTS LIVE CENTERS - CSN 243328 • Designed to keep dust, chips and coolant from coming inside the bearings • Hardened and ground to 61-65 Rockwell • Concentricity within .0002"
SKODA EXTENDED POINTS LIVE CENTERS D (in) 1.417 1.850 2.165 2.736 3.504
MT 2 3 4 5 6
d (in) .866 1.181 1.378 1.772 2.362
L (in) 5.059 6.575 8.169 10.197 13.425
l (kg) 2.560 3.386 4.094 5.078 6.319
Load (lb) 594 704 2200 3960 12600
Weight (lb) .79 1.85 3.19 7.04 17.05
Point Angle 60° 60° 60° 60° 60°
Code No. 310-160 310-165 310-170 310-175 310-180
Price $ 101.50 121.10 151.70 210.35 370.35
SKODA HEAVY DUTY BULL NOSE LIVE CENTERS - CSN 243319
Designed to hold pipe and hollow work. Pipe head can be used as an all-round centre for light work. Two matched angular contact bearings preloaded at the factory. This achieves good thrust and radial capacities. Bearings are protected by a combination steel shield and neoprene seal. • Accuracy: ±0.0001"
SKODA HEAVY DUTY BULL NOSE LIVE CENTERS MT 3 4 5 6
a 60° 60° 60° 60°
D (in) 3.150 4.527 5.314 6.693
d (in) 1.378 1.732 1.811 2.520
L (in) 6.380 7.637 9.449 12.125
l (kg) 3.189 3.622 4.331 4.961
Load (lb) 880 2860 4400 8800
Weight (lb) 4.62 9.68 17.60 51.70
Code No. 310-140 310-145 310-150 310-155
Price $ 403.70 650.95 877.00 2030.25
SKODA LIVE CENTERS
SKODA LIVE CENTER SETS - CSN 243326 • The rotating spindle is extended right through the tapered shank • Two specially designed adjustable needle-roller bearings carry all radial loads • A heavy duty ball thrust bearing takes all axial thrust • Complete protection of bearings form the ingress of coolant, dirt or swarf is provided by the built-in oil-seal, which also prevents loss of lubricant
Features
SKODA LIVE CENTER SETS Morse Taper d 3 .590 4 .784 5 .984 6 1.181
l .984 1.181 1.496 1.811
Morse Taper 3 4 5 6
A L 1.968 2.362 2.874 3.543
B-G A L D D1 1.771 .787 .019 2.086 .984 .019 2.559 1.259 .039 3.149 1.417 .039
Part A Code No. 310-724 310-744 310-764 310-784
B D 1.417 1.771 2.204 2.755
Part B Code No. 310-726 310-746 310-766 310-786
C D1 .236 .393 .551 .708
D 2.480 2.755 3.149 3.937
D1 1.299 1.378 1.496 1.968
D 1.417 1.771 2.204 2.755
Part C Code No. 310-728 310-748 310-768 310-788
D D1 1.102 1.456 1.732 2.283
D2 .472 .669 .787 .950
Part D Code No. 310-730 310-750 310-770 310-790
D 1.771 2.480 2.775 3.937
E F D1 D2 D D1 1.496 .866 .787 .098 2.086 1.181 .984 .196 2.362 1.417 1.259 .196 3.464 2.126 1.417 .315
Part E Code No. 310-732 310-752 310-772 310-792
G D .984 1.259 1.771 2.204
Part F Code No. 310-734 310-754 310-774 310-794
ADDITIONAL ITEMS FOR SKODA LIVE CENTER SETS
ADDITIONAL ITEMS FOR SKODA LIVE CENTER SETS Morse Taper 3 4 5 6
Live Centre Only Code No. 310-722 310-742 310-762 310-782
Wooden Case Code No. 310-738 310-758 310-778 310-798
Drift Key Code 310-740 310-760 310-780 310-800
Code No. 310-705 310-710 310-715 310-720
Part G Code No. 310-736 310-756 310-776 310-796
BORING & FACING HEADS
9
NAREX BORING AND FACING HEADS
UNIVERSAL BORING AND FACING MASTERHEAD Solve ALL Your Boring and Facing Problems
• All models available in metric
UNIVERSAL BORING AND FACING MASTERHEAD VHU-36 VHU-56 VHU-80 Model No. Code No. 300-007 300-055 300-105 300-008 300-056 300-106 Metric Set Code No. QUICK RETURN MOVEMENT QUICK RETURN ADJUSTMENT THROUGH SLIDE SETTING SCREW ± .0002 ± .0002 ± .0002 Operating Accuracy Boring and facing range from 0 up to 9 13 16 1.375 2.125 3.125 Max. adjustability of slide Max. dia. of slide 2.750 4.250 6.250 .002 .002 Various automatic slide – .0016 .004 .004 feeds per revolution .0032 .006 .006 .0048 .008 .008 1 graduation of sensitive .0005 .0005 .0005 adjustments ins. on dia. 1 Revolution of sensitive adjustment .016 .016 .016 Quick return per revolution .030 .120 .120 Diameter of tool post holes in slide 5⁄8 1 1 Height of Head without shank 3.125 4.350 4.350 Width of Head 2.875 4.500 5.500 Weight of head without shank 4 lb 12 lb 16 lb Accessories 300-003 300-053 300-104 Head only 300-004 300-054 300-103 Case only 300-006 300-052 300-102 Shank M.T. 2 300-010 Shank M.T. 3 300-015 Shank M.T. 4 300-020 300-060 300-110 Shank M.T. 5 300-115 300-115 Shank M.T. 6 300-165 Shank ISA - 30 300-025 Shank ISA - 40 300-030 300-070 300-070 Shank ISA - 50 300-075 300-075 Shank R - 8 300-035 300-080 Shank Straight 3/4 300-039 Shank Straight 1 300-040 Shank Cat - 40 300-033 300-073 Shank Cat - 50 300-076 300-076 Shank BT - 40 300-034 300-074 Shank BT - 50 300-077 300-077 Tang M.T. 2 300-245 Tang M.T. 3 300-250 Tang M.T. 4 300-255 300-255 300-255 Tang M.T. 5 300-260 300-260 Tang M.T. 6 300-265
Boring bars Boring bars Boring bar holders Extension holder Complete set of reinforcing rings Carbide round tool bits HSS square tool bits Reducing sleeve Reducing sleeve
VHU-125 300-155 300-156
VHU-160 300-205 300-206
± .0002 24 4.875 9.750 .002 .004 .006 .008 .0005
± .0002 31 5.750 11.500 .002 .004 .006 .008 .0005
.016 .160 1-1⁄4 5.000 7.000 26.6 lb 300-153 300-154 300-204
.016 .160 1-1⁄4 5.000 8.725 31 lb 300-202 300-203 300-204
300-115 300-165
300-115 300-165
300-075
300-075
300-076
300-076
300-077
300-077
300-260 300-265
300-260 300-265
STANDARD EQUIPMENT SUPPLIED WITH THE MASTER HEAD IN CASE 3⁄8 2 pcs. 1x4 1x4 1-1⁄4 x 6 5⁄8 2 pcs. 1x6 1x6 1-1⁄4 x 9-3⁄4 *1 x 5-1⁄2 *1 x 5-1⁄2 *1-1⁄4 x 6-5⁄16 *2 pcs. *2 pcs. *2 pcs. 5⁄8 x 3-7⁄8 1 x 6-7⁄8 1 x 6-5⁄8 1-1⁄4 x 11-13⁄16 5⁄8 1 1 1-1⁄4 *5⁄8 *1 *1 *1-1⁄4 *4 pcs. *4 pcs. *4 pcs. *5⁄16 x 1-3⁄16 *5⁄16 x 1-3⁄16 *3⁄8 x 1-13⁄32 *4 pcs. *4 pcs. *4 pcs. 5⁄8 x 3⁄8 1 x 3⁄4 1 x 3⁄4 1-1⁄4 x 3⁄4 1 x 5⁄8 1 x 5⁄8 1-1⁄4 x 5⁄8
1-1⁄4 x 6 1-1⁄4 x 9-3⁄4 *1-1⁄4 x 6-5⁄16 *2 pcs. 1-1⁄4 x 11-13⁄16 1-1⁄4 *1-1⁄4 *4 pcs. *3⁄8 x 1-13⁄32 *4 pcs. 1-1⁄4 x 3⁄4 1-1⁄4 x 5⁄8
NAREX BORING AND FACING HEADS
Principal Component Part of Head Vhu-36 1. 2. 3. 4. 5. 6. 7. 8. 9.
Braking ring Engaging ring Control ring Scale Slide Setting screw Holes for tools Clamping screws Screw for locking slide
in position 10. Stop dog 11. Stop dog pin 12. Knob for rapid traverse control (only in Vhu 1-1/4) 13. Lubricator 14. Screw for clutch adjustment 15. Clutch 16. Retaining rod
Basic machining operations shown for the Vhu type universal boring heads:
1. Boring of holes 2. Spotfacing of small end large-diameter end faces 3. Recessing inside holes 4. Recessing on surfaces of parts 5. Free recessing
6. External diameter machining 7. Boring of tapered holes 8. External machining of taper 9. Facing of rear end faces 10. Thread cutting
NAREX BORING AND FACING HEADS NAREX BORING HEAD PARTS BREAKDOWN FOR VHU 36, 56, 80, 125, 160 VHU 36
NAREX BORING AND FACING HEADS
NAREX BORING HEAD PARTS BREAKDOWN FOR VHU 36, 56, 80, 125, 160 CONTINUED
NAREX BORING AND FACING HEADS
NAREX BORING AND FACING HEAD PARTS New Part
Description
Part No. Sowa Code VHU 36 (1-3/8)
pcs
4 1 1 1
#70-300-770 #2-300-702 #36-300-736 #71-300-771
5 Clutch Pin (Safety pin) 6 Hold Ring (Brake ring) 7 Set Ring 8 Pin 9 Ring (Control Ring) 10 Spring 11 Spring 12 Pin 13 Cap Screw 14 Cover (Lid) 15 Washer 16 Star Gear (Ratchet Wheel) 17 Washer (Ring) 18 Slideguide
1 1 1 2 1 2 6 6 1 1 1 1 1 1
#26-300-726 #3-300-703 #4-300-704 #36-300-736 #5-300-705 #20-300-720 #7-300-707 #8-300-708 #64-300-764 #16-300-716 #65-300-765 #15-300-715 #18-300-718 #10-300-710
19 20 21 22 23 24 25 26 27
Screw Spring Brake Washer (Ring) Pin Stop Screw Stop (Dog) - L.H. Stop Stop Nut (Insert) Slide
2 2 2 2 2 1
#22-300-722 #69-300-769 #39-300-739 #28-300-728 #42-300-742 #13-300-713
28 29 30 31
Pin (Bar) Spring Set Screw Set Screw
1 1 1 3
#47-300-747 #46-300-746 #74-300-774 #35-300-735
4 1 1 1 1 1 1 1 2 1 1 8 8 1 1 1 1 1 1 1 1 1 1 2 2 4 1 2 1 1 1 1 1 3
#88-300-588 #3-300-503 #51-300-551 #80-300-480(vhu-56) #91-300-591(vhu-80) #5-300-505 #4-300-504 #6-300-506 #54-300-554 #7-300-507 #40-300-540 #11-300-511 #9-300-509 #46-300-546 #18-300-518 #41-300-541 #20-300-520 #22-300-522 #13-300-413(vhu-56) #13-300-513(vhu-80) #77-300-577 #36-300-536 #21-300-521 #25-300-525 #51-300-551 #49-300-549 #15-300-515 #14-300-514 #2-300-402(vhu-56) #2-300-502(vhu-80) #24-300-524 #70-300-570 #8-300-508 #68-300-568
32
Set Screw
3
#41-300-741
3
#67-300-567
33 34
Ball Worm Rod (Screw)
3 1
#75-300-775 #12-300-712
1 2 1 2 2 1 1 1 3 3 1
#27-300-727 #77-300-777 #17-300-717 #76-300-776 #21-300-721 #9-300-709 #23-300-723 #66-300-766 #49-300-749 #48-300-748 #6-300-706
3 #58-300-558 1 #23-300-423(vhu-56) 1 #23-300-523(vhu-80) 1 #37-300-537 2 #53-300-553 1 #38-300-538 2 #43-300-543 1 #16-300-516 2 #26-300-526 1 #12-300-512 1 #17-300-417 1 #19-300-519 3 #72-300-572 3 #45-300-545 1 #10-300-510
VHU Model No. New I.D. No. 1 2 3 4
Cap Screw Ring Pin Flange (Hold-Ring)
35 Washer (Distance Ring) - Spacer 36 Pin 37 End Stop (Back Bearing) 38 End Screw 39 Stop (Dog) - R.H. Stop 40 Gear Ring 41 Spindle (Worm) 42 Worm Gear (Worm Wheel) 43 Pin (Parallel Key) 44 Head Nut 45 Head Screw 47 Ring (Control Ring)
pcs
Part No. Sowa Code VHU 56 (2-1/8) VHU 80 (3-1/8)
pcs
Part No Sowa Code VHU 125 (4-7/8) VHU 160 (6-1/4)
4 1 1 1
#88-300-588 #3-300-603 #55-300-655 #91-300-691
1 1 1 2 1 1 8 8 1 1 1 1 1 1
#5-300-605 #4-300-604 #6-300-606 #58-300-658 #7-300-607 #40-300-640 #11-300-611 #9-300-609 #50-300-650 #18-300-618 #46-300-646 #20-300-620 #22-300-622 #13-300-613
1 1 1 2 2 4 1 2 1 1 1 1 1 3 5 3 5 3 1 1 1 2 1 2 1 2 1 1 1 4 4 1
#53-300-653 #70-300-670 #21-300-621 #25-300-625 #55-300-655 #44-300-644 #15-300-615 #14-300-614 #2-300-602 #80-300-680 #24-300-624 #70-300-670 #71-300-671 #74-300-674 #74-300-674 #73-300-673 #73-300-673 #61-300-661 #23-300-623 #92-300-692 #37-300-637 #57-300-657 #38-300-638 #48-300-648 #16-300-616 #26-300-626 #12-300-612 #17-300-617 #19-300-619 #47-300-647 #49-300-649 #10-300-610
NAREX BORING AND FACING HEADS
NAREX BORING AND FACING HEAD PARTS New Part
Description
Part No. Sowa Code VHU 36 (1-3/8)
pcs
Part No. Sowa Code VHU 56 (2-1/8) VHU 80 (3-1/8)
pcs
Part No Sowa Code VHU 125 (4-7/8) VHU 160 (6-1/4)
2 2 1 1 1 1 1 1 1 1 1 6
#38-300-738 #44-300-744 #34-300-734 #63-300-763 #24-300-724 #25-300-725 #51-300-751 #40-300-740 #32-300-732 #19-300-719 #59-300-779 #70-300-770
2 2 1 1 1 1 1 6
#59-300-659 #61-300-661 #35-300-635 #62-300-662 #51-300-651 #29-300-629 #30-300-630 #89-300-689
61 Pin 62 Plug 63 Ring Clip (Circlip) 64 Parallel key 65 Screw 66 Pin 67 Set Screw 68 Screw 69 Pin 101 Boring tool 5x3/8"x60 102 Boring tool 13x5/8"x90 103 Internal corner tool 5x3/8"x60 104 Internal corner tool 13x5/8"x90 105 Right hand tool S20 106 Right hand tool H10 107 Left hand tool S20 108 Left hand tool H10 109 Tool HSS 110 Tool S20 111 Extension (Boring bar) 112 Extension (Boring bar) 113 Toolholder (Holder with screw)
1 2 1 1 2 1 1 1 1 1 1 1 1 1 -
#78-300-778 #45-300-780 #50-300-750 #14-300-781 #41-300-741 #37-300-782 #54-300-754 #52-300-752 #55-300-755 #53-300-753 #59-300-759 #58-300-758 #57-300-757 #56-300-756 -
114 Toolholder (Holder with screw)
1
#31-300-731
115 Collar Set (Set of spacing tubes) 116 Reducer (Reduction sleeve) 117 Reducer (Reduction sleeve) 118Allen (Hexagon) Wrench "NAREX" 119 Allen (Hexagon) Wrench 4 120 Hexagon wrench 6 121 Washer 122 Hex Screw 27P Slide-set consists of parts: 27+36+37+38+28+29+30+31+32 34P Screw-set consists of parts: 34+42+40+22+35+23 42P Worm wheel-set consists of: 42+40+22+23
1 1 1 1 1 1
#30-300-730 #33-300-733 #73-300-773 #60-300-760 #29-300-729 #43-300-743
2 #56-300-556 2 #58-300-558 1 #35-300-535 1 #59-300-559 1 #47-300-547 1 #29-300-529 1 #30-300-530 6 #81-300-481(vhu-56) 6 #89-300-589(vhu-80) 2 #57-300-592 1 #60-300-560 4 #87-300-587 4 #90-300-590 1 #55-300-593 2 #67-300-567 2 #48-300-548 1 #69-300-594 1 #65-300-565 1 #75-300-575 1 #66-300-566 1 #76-300-576 2 #64-300-564 2 #63-300-563 1 #28-300-528 1 #27-300-527 2 L=160 #34-300-534 2 L=185 #34-300-534 1 L=195 #33-300-533 1 L=220 #33-300-533 1 #32-300-532 1 #42-300-542 1 #44-300-544 1 #61-300-561 1 #62-300-562 1 #31-300-531 1 #50-300-550
2 1 4 4 1 2 2 1 1 1 1 1 2 2 1 1 2 1 1 1 1 1 1 1 1 1
#60-300-694 #63-300-663 #87-300-687 #90-300-690 #42-300-695 #73-300-673 #52-300-652 #45-300-696 #68-300-668 #77-300-677 #66-300-666 #76-300-676 #67-300-667 #69-300-669 #28-300-628 #27-300-627 #34-300-634 L=350 #33-300-633 L=385 #33-300-633 #32-300-632 #41-300-641 #8-300-608
VHU Model No. New I.D. No 48 49 50 51 52 53 54 55 56 57 58 59 60
Pin Ball Stop Rod (Bar) Knob (Ball) Screw Spring Pin Point Ball Cap Screw Pin Ball (Brake) Pin Cap Screw
pcs
-
-
-
-
-
-
-
#64-300-664 #65-300-665 #31-300-631 #54-300-654
-
-
-
-
ALSO FROM SOWA
Value +
• European Engineering and Design • Supplied with nationally traceable calibration certificates • 12 + 12 Care Warranty Program
Call today for your catalog For more details visit us at:
www.asimeto.com
CALL FOR YOUR CATALOG TODAY
BALANCED ROTARY TOOLING 40 TAPER TO 20,000 RPM 50 TAPER TO 15,000 RPM
MODULAR AND MACHINE VISES MEETING TODAYS DEMAND OF INCREASED SPEED AND SPINDLE LIFE
CALL TODAY FOR YOUR GS CATALOG TODAY Distributed By:
TOOL & MACHINE CO. LTD. 500 Manitou Drive Kitchener, Ontario N2G 4B6
Toll Free: 1-800-265-8221 Phone: (519) 748-5750 Fax: (519) 748-9304 Email: [email protected] web: www.sowatool.com
ISO 9001
USAC08
Printed in Canada
LIVE CENTERS BORING AND FACING HEADS
SKODA LIVE CENTERS
SKODA & STM HEAVY DUTY LIVE CENTERS - CSN 243324 • The rotating spindle is extended right through the tapered shank • Two specially designed adjustable needle-roller bearings carry all radial loads • A heavy duty ball thrust bearing takes all axial thrust • Complete protection of bearings form the ingress of coolant, dirt or swarf is provided by the built-in oil-seal, which also prevents loss of lubricant
Features
SKODA & STM HEAVY DUTY LIVE CENTERS Morse Taper 1 2 3 4 5 6
Centre Point Angle 60° 60° 60° 60° 60° 60°
Body Dia. (in) 5⁄8 7⁄8 1-1⁄8 1-1⁄2 1-3⁄4 2-3⁄8
Body Dia. (in) 1-3⁄8 1-1⁄2 1-7⁄8 2-3⁄16 2-3⁄4 3-1⁄2
Body Length (in) 4-3⁄8 5 6-1⁄4 7-1⁄2 9-1⁄2 12-3⁄4
Maximum Weight of Work Piece 200 lb 600 lb 900 lb 1800 lb 3000 lb 7500 lb
SKODA Code No. 310-105 310-110 310-115 310-120 310-125 310-130
STM Code No. 320-105 320-110 320-115 320-120 320-125 320-130
PARTS FOR HEAVY DUTY LIVE CENTERS 11
10
PARTS FOR HEAVY DUTY LIVE CENTERS Morse Taper 2 3 4 5 6
2-Point Code No. 310-205 310-305 310-405 310-505 310-605
3-Ring Code No. 310-210 310-310 310-410 310-510 310-610
4-Sleeve Code No. 310-215 310-315 310-415 310-515 310-615
5-End Plug Code No. 310-220 310-320 310-420 310-520 310-620
6-Seal Code No. 310-225 310-325 310-425 310-525 310-625
7-Roller Bearing Code No. 310-230 310-330 310-430 310-530 310-630
PARTS FOR HEAVY DUTY LIVE CENTERS Morse Taper 2 3 4 5 6
8-Thrust Bearing Code No. 310-235 310-335 310-435 310-535 310-635
9-Ball Bearing Code No. 310-240 310-340 310-440 310-540 310-640
10-Set Screw Code No. 310-245 310-345 310-445 310-545 310-645
11-Slot Screw Code No. 310-250 310-350 310-450 310-550 310-650
12-Ring Code No. 310-255 310-355 310-455 310-555 310-655
SKODA LIVE CENTERS
SKODA EXTRA HEAVY DUTY LIVE CENTERS - CSN 243325 For clamping of heavy workpieces at lathes. • The rigid structure and seating of the turning part is characterized by long service life • The model EXTRA is commonly used for work at grinding machines • Centres with the apex angle of 60° for reduction of deformations of the machine (tailstock, bed, headstock) from axial clamping forces • The live centres are provided with shanks according to DIN 228 and ISO 296 (without clamping thread)
SKODA EXTRA HEAVY DUTY LIVE CENTERS D (in) 3.14 3.54 4.92 5.70
Morse Taper 4 5 6 7
d (in) 1.58 1.65 2.16 2.56
a 60° 60° 60° 60°
I (in) 4.10 5.60 6.42 7.80
L (in) 7.85 9.48 13.38 15.25
Load (lb) 3300 5500 11000 17600
Weight (lb) 5 9 27 45
Code No. 310-920 310-925 310-930 310-935
SPARE PARTS FOR EXTRA HEAVY DUTY LIVE CENTERS
SPARE PARTS FOR EXTRA HEAVY Parts No. MT 4-02 4-03 4-04 4-05 4-06 4-07 4-08 4-09 4-10 4-11 4-12 4-13 MT 5-02 5-03 5-04 5.05 5.06 5-07 5-08 5-09 5-10 5-11 5-12 5-13
Description 90° Point 60° Point Ring End Plug Sealing Roller Bearing Thrust Bearing Radial Bearing Lock Screw Packing Piece Packing Ring Packing Ring 90° Point 60° Point Ring End Plug Sealing Roller Bearing Thrust Bearing Radial Bearing Lock Screw Packing Piece Packing Ring Packing Ring
Code No. 310-802 310-803 310-804 310-805 310-806 310-807 310-808 310-809 310-810 310-811 310-812 310-813 310-816 310-817 310-818 310-819 310-820 310-821 310-822 310-823 310-824 310-825 310-826 310-827
DUTY LIVE CENTERS Parts No. MT 6-02 6-03 6-04 6-05 6-06 6-07 6-08 6-09 6-10 6-11 6-12 6-13
Description 90° Point 60° Point Ring End Plug Sealing Roller Bearing Thrust Bearing Radial Bearing Lock Screw Packing Piece Packing Ring Packing Ring
Code No. 310-830 310-831 310-832 310-833 310-834 310-835 310-836 310-837 310-838 310-839 310-840 310-841
SKODA LIVE CENTERS
SKODA PRECISION CNC LIVE CENTERS - CSN 243327-II
• The centres are intended for NC lathes. Their face parts are formed to allow easy access of the tool to the workpiece, which is an advantage with workpieces of complex shapes • A special ring is used to set the radial clearance of the centre. It also prevents cutting lubricant from leaking into the centre bearing space, and so extends the operational life of the centre • Spindle-like point extends into shank where it is supported by a needle bearing, increasing rigidity, reducing point deflection and dampening vibration
SKODA PRECISION CNC LIVE CENTERS D (in) 1.5 1.85 2.20 3.10
Morse Taper 2 3 4 5
d (in) .695 .750 1.125 1.375
L (in) 5.25 6.75 8.15 10.50
l (in) 2.65 3.50 3.95 4.85
Load (lb) 1300 1550 4840 7750
Code No. 310-010 310-015 310-020 310-025
SPARE PARTS FOR CNC LIVE CENTERS 11
10
SPARE PARTS FOR CNC LIVE CENTERS Parts No. MT 2-02 2-03 2-04 2-05 2-06 2-07 2-08 2-09 2-10 2-11 2-12 MT 3-02 3-03 3-04 3-05 3-06 3-07 3-08 3-09 3-10 3-11 3-12
Description Point Set Ring Ring End Plug Packing Piece Needle Bearing Thrust Bearing Radial Bearing Countersink Screw Lock Screw Snap Ring Point Set Ring Ring End Plug Packing Piece Needle Bearing Thrust Bearing Radial Bearing Countersink Screw Lock Screw Snap Ring
Code No. 310-855 310-856 310-857 310-858 310-859 310-860 310-861 310-862 310-863 310-864 310-865 310-869 310-870 310-871 310-872 310-873 310-874 310-875 310-876 310-877 310-878 310-879
Parts No. MT 4-02 4-03 4-04 4-05 4-06 4-07 4-08 4-09 4-10 4-11 4-12 MT 5-02 5-03 5-04 5-05 5-06 5-07 5-08 5-09 5-10 5-11 5-12
Description Point Set Ring Ring End Plug Packing Piece Needle Bearing Thrust Bearing Radial Bearing Countersink Screw Lock Screw Snap Ring Point Set Ring Ring End Plug Packing Piece Needle Bearing Thrust Bearing Radial Bearing Countersink Screw Lock Screw Snap Ring
Code No. 310-882 310-883 310-884 310-885 310-886 310-887 310-888 310-889 310-890 310-891 310-892 310-895 310-896 310-897 310-898 310-899 310-900 310-901 310-902 310-903 310-904 310-905
SKODA LIVE CENTERS
SKODA EXTENDED POINTS LIVE CENTERS - CSN 243328 • Designed to keep dust, chips and coolant from coming inside the bearings • Hardened and ground to 61-65 Rockwell • Concentricity within .0002"
SKODA EXTENDED POINTS LIVE CENTERS D (in) 1.417 1.850 2.165 2.736 3.504
MT 2 3 4 5 6
d (in) .866 1.181 1.378 1.772 2.362
L (in) 5.059 6.575 8.169 10.197 13.425
l (kg) 2.560 3.386 4.094 5.078 6.319
Load (lb) 594 704 2200 3960 12600
Weight (lb) .79 1.85 3.19 7.04 17.05
Point Angle 60° 60° 60° 60° 60°
Code No. 310-160 310-165 310-170 310-175 310-180
Price $ 101.50 121.10 151.70 210.35 370.35
SKODA HEAVY DUTY BULL NOSE LIVE CENTERS - CSN 243319
Designed to hold pipe and hollow work. Pipe head can be used as an all-round centre for light work. Two matched angular contact bearings preloaded at the factory. This achieves good thrust and radial capacities. Bearings are protected by a combination steel shield and neoprene seal. • Accuracy: ±0.0001"
SKODA HEAVY DUTY BULL NOSE LIVE CENTERS MT 3 4 5 6
a 60° 60° 60° 60°
D (in) 3.150 4.527 5.314 6.693
d (in) 1.378 1.732 1.811 2.520
L (in) 6.380 7.637 9.449 12.125
l (kg) 3.189 3.622 4.331 4.961
Load (lb) 880 2860 4400 8800
Weight (lb) 4.62 9.68 17.60 51.70
Code No. 310-140 310-145 310-150 310-155
Price $ 403.70 650.95 877.00 2030.25
SKODA LIVE CENTERS
SKODA LIVE CENTER SETS - CSN 243326 • The rotating spindle is extended right through the tapered shank • Two specially designed adjustable needle-roller bearings carry all radial loads • A heavy duty ball thrust bearing takes all axial thrust • Complete protection of bearings form the ingress of coolant, dirt or swarf is provided by the built-in oil-seal, which also prevents loss of lubricant
Features
SKODA LIVE CENTER SETS Morse Taper d 3 .590 4 .784 5 .984 6 1.181
l .984 1.181 1.496 1.811
Morse Taper 3 4 5 6
A L 1.968 2.362 2.874 3.543
B-G A L D D1 1.771 .787 .019 2.086 .984 .019 2.559 1.259 .039 3.149 1.417 .039
Part A Code No. 310-724 310-744 310-764 310-784
B D 1.417 1.771 2.204 2.755
Part B Code No. 310-726 310-746 310-766 310-786
C D1 .236 .393 .551 .708
D 2.480 2.755 3.149 3.937
D1 1.299 1.378 1.496 1.968
D 1.417 1.771 2.204 2.755
Part C Code No. 310-728 310-748 310-768 310-788
D D1 1.102 1.456 1.732 2.283
D2 .472 .669 .787 .950
Part D Code No. 310-730 310-750 310-770 310-790
D 1.771 2.480 2.775 3.937
E F D1 D2 D D1 1.496 .866 .787 .098 2.086 1.181 .984 .196 2.362 1.417 1.259 .196 3.464 2.126 1.417 .315
Part E Code No. 310-732 310-752 310-772 310-792
G D .984 1.259 1.771 2.204
Part F Code No. 310-734 310-754 310-774 310-794
ADDITIONAL ITEMS FOR SKODA LIVE CENTER SETS
ADDITIONAL ITEMS FOR SKODA LIVE CENTER SETS Morse Taper 3 4 5 6
Live Centre Only Code No. 310-722 310-742 310-762 310-782
Wooden Case Code No. 310-738 310-758 310-778 310-798
Drift Key Code 310-740 310-760 310-780 310-800
Code No. 310-705 310-710 310-715 310-720
Part G Code No. 310-736 310-756 310-776 310-796
BORING & FACING HEADS
9
NAREX BORING AND FACING HEADS
UNIVERSAL BORING AND FACING MASTERHEAD Solve ALL Your Boring and Facing Problems
• All models available in metric
UNIVERSAL BORING AND FACING MASTERHEAD VHU-36 VHU-56 VHU-80 Model No. Code No. 300-007 300-055 300-105 300-008 300-056 300-106 Metric Set Code No. QUICK RETURN MOVEMENT QUICK RETURN ADJUSTMENT THROUGH SLIDE SETTING SCREW ± .0002 ± .0002 ± .0002 Operating Accuracy Boring and facing range from 0 up to 9 13 16 1.375 2.125 3.125 Max. adjustability of slide Max. dia. of slide 2.750 4.250 6.250 .002 .002 Various automatic slide – .0016 .004 .004 feeds per revolution .0032 .006 .006 .0048 .008 .008 1 graduation of sensitive .0005 .0005 .0005 adjustments ins. on dia. 1 Revolution of sensitive adjustment .016 .016 .016 Quick return per revolution .030 .120 .120 Diameter of tool post holes in slide 5⁄8 1 1 Height of Head without shank 3.125 4.350 4.350 Width of Head 2.875 4.500 5.500 Weight of head without shank 4 lb 12 lb 16 lb Accessories 300-003 300-053 300-104 Head only 300-004 300-054 300-103 Case only 300-006 300-052 300-102 Shank M.T. 2 300-010 Shank M.T. 3 300-015 Shank M.T. 4 300-020 300-060 300-110 Shank M.T. 5 300-115 300-115 Shank M.T. 6 300-165 Shank ISA - 30 300-025 Shank ISA - 40 300-030 300-070 300-070 Shank ISA - 50 300-075 300-075 Shank R - 8 300-035 300-080 Shank Straight 3/4 300-039 Shank Straight 1 300-040 Shank Cat - 40 300-033 300-073 Shank Cat - 50 300-076 300-076 Shank BT - 40 300-034 300-074 Shank BT - 50 300-077 300-077 Tang M.T. 2 300-245 Tang M.T. 3 300-250 Tang M.T. 4 300-255 300-255 300-255 Tang M.T. 5 300-260 300-260 Tang M.T. 6 300-265
Boring bars Boring bars Boring bar holders Extension holder Complete set of reinforcing rings Carbide round tool bits HSS square tool bits Reducing sleeve Reducing sleeve
VHU-125 300-155 300-156
VHU-160 300-205 300-206
± .0002 24 4.875 9.750 .002 .004 .006 .008 .0005
± .0002 31 5.750 11.500 .002 .004 .006 .008 .0005
.016 .160 1-1⁄4 5.000 7.000 26.6 lb 300-153 300-154 300-204
.016 .160 1-1⁄4 5.000 8.725 31 lb 300-202 300-203 300-204
300-115 300-165
300-115 300-165
300-075
300-075
300-076
300-076
300-077
300-077
300-260 300-265
300-260 300-265
STANDARD EQUIPMENT SUPPLIED WITH THE MASTER HEAD IN CASE 3⁄8 2 pcs. 1x4 1x4 1-1⁄4 x 6 5⁄8 2 pcs. 1x6 1x6 1-1⁄4 x 9-3⁄4 *1 x 5-1⁄2 *1 x 5-1⁄2 *1-1⁄4 x 6-5⁄16 *2 pcs. *2 pcs. *2 pcs. 5⁄8 x 3-7⁄8 1 x 6-7⁄8 1 x 6-5⁄8 1-1⁄4 x 11-13⁄16 5⁄8 1 1 1-1⁄4 *5⁄8 *1 *1 *1-1⁄4 *4 pcs. *4 pcs. *4 pcs. *5⁄16 x 1-3⁄16 *5⁄16 x 1-3⁄16 *3⁄8 x 1-13⁄32 *4 pcs. *4 pcs. *4 pcs. 5⁄8 x 3⁄8 1 x 3⁄4 1 x 3⁄4 1-1⁄4 x 3⁄4 1 x 5⁄8 1 x 5⁄8 1-1⁄4 x 5⁄8
1-1⁄4 x 6 1-1⁄4 x 9-3⁄4 *1-1⁄4 x 6-5⁄16 *2 pcs. 1-1⁄4 x 11-13⁄16 1-1⁄4 *1-1⁄4 *4 pcs. *3⁄8 x 1-13⁄32 *4 pcs. 1-1⁄4 x 3⁄4 1-1⁄4 x 5⁄8
NAREX BORING AND FACING HEADS
Principal Component Part of Head Vhu-36 1. 2. 3. 4. 5. 6. 7. 8. 9.
Braking ring Engaging ring Control ring Scale Slide Setting screw Holes for tools Clamping screws Screw for locking slide
in position 10. Stop dog 11. Stop dog pin 12. Knob for rapid traverse control (only in Vhu 1-1/4) 13. Lubricator 14. Screw for clutch adjustment 15. Clutch 16. Retaining rod
Basic machining operations shown for the Vhu type universal boring heads:
1. Boring of holes 2. Spotfacing of small end large-diameter end faces 3. Recessing inside holes 4. Recessing on surfaces of parts 5. Free recessing
6. External diameter machining 7. Boring of tapered holes 8. External machining of taper 9. Facing of rear end faces 10. Thread cutting
NAREX BORING AND FACING HEADS NAREX BORING HEAD PARTS BREAKDOWN FOR VHU 36, 56, 80, 125, 160 VHU 36
NAREX BORING AND FACING HEADS
NAREX BORING HEAD PARTS BREAKDOWN FOR VHU 36, 56, 80, 125, 160 CONTINUED
NAREX BORING AND FACING HEADS
NAREX BORING AND FACING HEAD PARTS New Part
Description
Part No. Sowa Code VHU 36 (1-3/8)
pcs
4 1 1 1
#70-300-770 #2-300-702 #36-300-736 #71-300-771
5 Clutch Pin (Safety pin) 6 Hold Ring (Brake ring) 7 Set Ring 8 Pin 9 Ring (Control Ring) 10 Spring 11 Spring 12 Pin 13 Cap Screw 14 Cover (Lid) 15 Washer 16 Star Gear (Ratchet Wheel) 17 Washer (Ring) 18 Slideguide
1 1 1 2 1 2 6 6 1 1 1 1 1 1
#26-300-726 #3-300-703 #4-300-704 #36-300-736 #5-300-705 #20-300-720 #7-300-707 #8-300-708 #64-300-764 #16-300-716 #65-300-765 #15-300-715 #18-300-718 #10-300-710
19 20 21 22 23 24 25 26 27
Screw Spring Brake Washer (Ring) Pin Stop Screw Stop (Dog) - L.H. Stop Stop Nut (Insert) Slide
2 2 2 2 2 1
#22-300-722 #69-300-769 #39-300-739 #28-300-728 #42-300-742 #13-300-713
28 29 30 31
Pin (Bar) Spring Set Screw Set Screw
1 1 1 3
#47-300-747 #46-300-746 #74-300-774 #35-300-735
4 1 1 1 1 1 1 1 2 1 1 8 8 1 1 1 1 1 1 1 1 1 1 2 2 4 1 2 1 1 1 1 1 3
#88-300-588 #3-300-503 #51-300-551 #80-300-480(vhu-56) #91-300-591(vhu-80) #5-300-505 #4-300-504 #6-300-506 #54-300-554 #7-300-507 #40-300-540 #11-300-511 #9-300-509 #46-300-546 #18-300-518 #41-300-541 #20-300-520 #22-300-522 #13-300-413(vhu-56) #13-300-513(vhu-80) #77-300-577 #36-300-536 #21-300-521 #25-300-525 #51-300-551 #49-300-549 #15-300-515 #14-300-514 #2-300-402(vhu-56) #2-300-502(vhu-80) #24-300-524 #70-300-570 #8-300-508 #68-300-568
32
Set Screw
3
#41-300-741
3
#67-300-567
33 34
Ball Worm Rod (Screw)
3 1
#75-300-775 #12-300-712
1 2 1 2 2 1 1 1 3 3 1
#27-300-727 #77-300-777 #17-300-717 #76-300-776 #21-300-721 #9-300-709 #23-300-723 #66-300-766 #49-300-749 #48-300-748 #6-300-706
3 #58-300-558 1 #23-300-423(vhu-56) 1 #23-300-523(vhu-80) 1 #37-300-537 2 #53-300-553 1 #38-300-538 2 #43-300-543 1 #16-300-516 2 #26-300-526 1 #12-300-512 1 #17-300-417 1 #19-300-519 3 #72-300-572 3 #45-300-545 1 #10-300-510
VHU Model No. New I.D. No. 1 2 3 4
Cap Screw Ring Pin Flange (Hold-Ring)
35 Washer (Distance Ring) - Spacer 36 Pin 37 End Stop (Back Bearing) 38 End Screw 39 Stop (Dog) - R.H. Stop 40 Gear Ring 41 Spindle (Worm) 42 Worm Gear (Worm Wheel) 43 Pin (Parallel Key) 44 Head Nut 45 Head Screw 47 Ring (Control Ring)
pcs
Part No. Sowa Code VHU 56 (2-1/8) VHU 80 (3-1/8)
pcs
Part No Sowa Code VHU 125 (4-7/8) VHU 160 (6-1/4)
4 1 1 1
#88-300-588 #3-300-603 #55-300-655 #91-300-691
1 1 1 2 1 1 8 8 1 1 1 1 1 1
#5-300-605 #4-300-604 #6-300-606 #58-300-658 #7-300-607 #40-300-640 #11-300-611 #9-300-609 #50-300-650 #18-300-618 #46-300-646 #20-300-620 #22-300-622 #13-300-613
1 1 1 2 2 4 1 2 1 1 1 1 1 3 5 3 5 3 1 1 1 2 1 2 1 2 1 1 1 4 4 1
#53-300-653 #70-300-670 #21-300-621 #25-300-625 #55-300-655 #44-300-644 #15-300-615 #14-300-614 #2-300-602 #80-300-680 #24-300-624 #70-300-670 #71-300-671 #74-300-674 #74-300-674 #73-300-673 #73-300-673 #61-300-661 #23-300-623 #92-300-692 #37-300-637 #57-300-657 #38-300-638 #48-300-648 #16-300-616 #26-300-626 #12-300-612 #17-300-617 #19-300-619 #47-300-647 #49-300-649 #10-300-610
NAREX BORING AND FACING HEADS
NAREX BORING AND FACING HEAD PARTS New Part
Description
Part No. Sowa Code VHU 36 (1-3/8)
pcs
Part No. Sowa Code VHU 56 (2-1/8) VHU 80 (3-1/8)
pcs
Part No Sowa Code VHU 125 (4-7/8) VHU 160 (6-1/4)
2 2 1 1 1 1 1 1 1 1 1 6
#38-300-738 #44-300-744 #34-300-734 #63-300-763 #24-300-724 #25-300-725 #51-300-751 #40-300-740 #32-300-732 #19-300-719 #59-300-779 #70-300-770
2 2 1 1 1 1 1 6
#59-300-659 #61-300-661 #35-300-635 #62-300-662 #51-300-651 #29-300-629 #30-300-630 #89-300-689
61 Pin 62 Plug 63 Ring Clip (Circlip) 64 Parallel key 65 Screw 66 Pin 67 Set Screw 68 Screw 69 Pin 101 Boring tool 5x3/8"x60 102 Boring tool 13x5/8"x90 103 Internal corner tool 5x3/8"x60 104 Internal corner tool 13x5/8"x90 105 Right hand tool S20 106 Right hand tool H10 107 Left hand tool S20 108 Left hand tool H10 109 Tool HSS 110 Tool S20 111 Extension (Boring bar) 112 Extension (Boring bar) 113 Toolholder (Holder with screw)
1 2 1 1 2 1 1 1 1 1 1 1 1 1 -
#78-300-778 #45-300-780 #50-300-750 #14-300-781 #41-300-741 #37-300-782 #54-300-754 #52-300-752 #55-300-755 #53-300-753 #59-300-759 #58-300-758 #57-300-757 #56-300-756 -
114 Toolholder (Holder with screw)
1
#31-300-731
115 Collar Set (Set of spacing tubes) 116 Reducer (Reduction sleeve) 117 Reducer (Reduction sleeve) 118Allen (Hexagon) Wrench "NAREX" 119 Allen (Hexagon) Wrench 4 120 Hexagon wrench 6 121 Washer 122 Hex Screw 27P Slide-set consists of parts: 27+36+37+38+28+29+30+31+32 34P Screw-set consists of parts: 34+42+40+22+35+23 42P Worm wheel-set consists of: 42+40+22+23
1 1 1 1 1 1
#30-300-730 #33-300-733 #73-300-773 #60-300-760 #29-300-729 #43-300-743
2 #56-300-556 2 #58-300-558 1 #35-300-535 1 #59-300-559 1 #47-300-547 1 #29-300-529 1 #30-300-530 6 #81-300-481(vhu-56) 6 #89-300-589(vhu-80) 2 #57-300-592 1 #60-300-560 4 #87-300-587 4 #90-300-590 1 #55-300-593 2 #67-300-567 2 #48-300-548 1 #69-300-594 1 #65-300-565 1 #75-300-575 1 #66-300-566 1 #76-300-576 2 #64-300-564 2 #63-300-563 1 #28-300-528 1 #27-300-527 2 L=160 #34-300-534 2 L=185 #34-300-534 1 L=195 #33-300-533 1 L=220 #33-300-533 1 #32-300-532 1 #42-300-542 1 #44-300-544 1 #61-300-561 1 #62-300-562 1 #31-300-531 1 #50-300-550
2 1 4 4 1 2 2 1 1 1 1 1 2 2 1 1 2 1 1 1 1 1 1 1 1 1
#60-300-694 #63-300-663 #87-300-687 #90-300-690 #42-300-695 #73-300-673 #52-300-652 #45-300-696 #68-300-668 #77-300-677 #66-300-666 #76-300-676 #67-300-667 #69-300-669 #28-300-628 #27-300-627 #34-300-634 L=350 #33-300-633 L=385 #33-300-633 #32-300-632 #41-300-641 #8-300-608
VHU Model No. New I.D. No 48 49 50 51 52 53 54 55 56 57 58 59 60
Pin Ball Stop Rod (Bar) Knob (Ball) Screw Spring Pin Point Ball Cap Screw Pin Ball (Brake) Pin Cap Screw
pcs
-
-
-
-
-
-
-
#64-300-664 #65-300-665 #31-300-631 #54-300-654
-
-
-
-
ALSO FROM SOWA
Value +
• European Engineering and Design • Supplied with nationally traceable calibration certificates • 12 + 12 Care Warranty Program
Call today for your catalog For more details visit us at:
www.asimeto.com
CALL FOR YOUR CATALOG TODAY
BALANCED ROTARY TOOLING 40 TAPER TO 20,000 RPM 50 TAPER TO 15,000 RPM
MODULAR AND MACHINE VISES MEETING TODAYS DEMAND OF INCREASED SPEED AND SPINDLE LIFE
CALL TODAY FOR YOUR GS CATALOG TODAY Distributed By:
TOOL & MACHINE CO. LTD. 500 Manitou Drive Kitchener, Ontario N2G 4B6
Toll Free: 1-800-265-8221 Phone: (519) 748-5750 Fax: (519) 748-9304 Email: [email protected] web: www.sowatool.com
ISO 9001
USAC08
Printed in Canada
