Acer Iconia One 7 Motherboard Replacement
Acer Iconia One 7 Motherboard Replacement
Acer Iconia One 7 Motherboard Replacement This guide will explain how to successfully remove the motherboard of the Acer Iconia One 7.
Written By: Michael
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 1 of 6
Acer Iconia One 7 Motherboard Replacement
INTRODUCTION The motherboard is embedded into the device and may be hard to remove, but this guide will show how to use the proper tools and techniques to remove and replace it.
TOOLS: iFixit Opening Tools (1) Tweezers (1) iFixit Opening Picks set of 6 (1) Plastic Cards (1) JIS Driver Set (1)
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 2 of 6
Acer Iconia One 7 Motherboard Replacement
Step 1 — Motherboard
Begin at any side of the tablet.
With a plastic opening tool, begin taking apart the back cover from the tablet by working along the edges.
Prying the lid open can be difficult, use caution in order to safely remove.
Reminder: Turn off device before this step
Step 2
© iFixit — CC BY-NC-SA
www.iFixit.com
Using a plastic opening tool, separate the back cover from the main device
Open each side continuously to ensure all sides have been separated,
Page 3 of 6
Acer Iconia One 7 Motherboard Replacement
Step 3
Turn tablet over.
Locate copper foil.
Peel back the copper foil to reveal motherboard.
Step 4
Peel tape back.
Disconnect all wires.
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 4 of 6
Acer Iconia One 7 Motherboard Replacement
Step 5
Use a JIS screw bit #00 to remove screws around the motherboard.
Step 6
Gently pull out motherboard.
To reassemble your device, follow these instructions in reverse order. This document was last generated on 2017-06-17 01:02:57 AM.
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 5 of 6
Acer Iconia One 7 Motherboard Replacement
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 6 of 6
Acer Iconia One 7 Motherboard Replacement This guide will explain how to successfully remove the motherboard of the Acer Iconia One 7.
Written By: Michael
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 1 of 6
Acer Iconia One 7 Motherboard Replacement
INTRODUCTION The motherboard is embedded into the device and may be hard to remove, but this guide will show how to use the proper tools and techniques to remove and replace it.
TOOLS: iFixit Opening Tools (1) Tweezers (1) iFixit Opening Picks set of 6 (1) Plastic Cards (1) JIS Driver Set (1)
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 2 of 6
Acer Iconia One 7 Motherboard Replacement
Step 1 — Motherboard
Begin at any side of the tablet.
With a plastic opening tool, begin taking apart the back cover from the tablet by working along the edges.
Prying the lid open can be difficult, use caution in order to safely remove.
Reminder: Turn off device before this step
Step 2
© iFixit — CC BY-NC-SA
www.iFixit.com
Using a plastic opening tool, separate the back cover from the main device
Open each side continuously to ensure all sides have been separated,
Page 3 of 6
Acer Iconia One 7 Motherboard Replacement
Step 3
Turn tablet over.
Locate copper foil.
Peel back the copper foil to reveal motherboard.
Step 4
Peel tape back.
Disconnect all wires.
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 4 of 6
Acer Iconia One 7 Motherboard Replacement
Step 5
Use a JIS screw bit #00 to remove screws around the motherboard.
Step 6
Gently pull out motherboard.
To reassemble your device, follow these instructions in reverse order. This document was last generated on 2017-06-17 01:02:57 AM.
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 5 of 6
Acer Iconia One 7 Motherboard Replacement
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 6 of 6
